Used Bench Router for sale (3,168)

Condition: good (used), functionality: fully functional, throat depth: 180 mm, spindle speed (min.): 480 rpm, overall weight: 65 kg, Bench Drill Manufacturer: IXION Model: BT 13 Technical Data: Manufacturer: IXION Model: BT 13 Year of manufacture: Spindle speeds: 480 – 850 – 1400 – 2300 – 4000 rpm Lajdpfew Ug Dqox Aabjh Drilling capacity: max. 13 mm in steel Table size (base): 230 x 170 mm Swivel table: 230 x 170 mm Drilling depth: 70 mm Tool holder: B 16 or MK 2 Throat depth: 180 mm T-slots: 10 mm Power: 1.5 kW Weight: 65 kg Dimensions: L 0.4 x W 0.5 x H 0.855 m All information subject to change and without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: new, bore capacity in steel (diameter) 16 mm throat 150 mm bore stroke 90 mm turning speeds 340 - 2200 U/min 243 x 243 mm total power requirement 0,5 kW / Volt weight of the machine ca. 42 Kg dimensions 400 x 450 x 900 mm Table drill Ledpfx Aajvdld Rjbjah - Digital speed display - Spindle protection - vice - drill replacement - Quick span feed (1 to 16 mm) - Tilt and rotating rider work table. - deep stop - tool set - documentation

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, For sale is a used, fully functional Dynapack DAQ54 chassis dynamometer with direct wheel hub connection. The system was purchased in March 2019 and has completed approximately 300 test cycles since – always carefully maintained and in excellent condition. The test bench comprises four mobile measurement units that are mounted directly to the vehicle's wheel hubs (after removing the wheels). Operation and data evaluation are handled via the included control unit with original software. Technical specifications: Max. measurable power: 3,000 hp / 2,200 kW (up to 1,500 hp / 1,100 kW per axle) Supports front-, rear-, and all-wheel drive Stationary or mobile operation (entire unit fits in a van) Laodpfx Aajwuqwvjbeh System advantages: - Precise power measurement via direct force transfer – no slippage, no friction losses - Maximum safety: No risk of tire blowouts or vehicle movement - Flexible deployment: Quick reconfiguration and compact design, also ideal for mobile use - Perfectly suited for tuning, development, and performance diagnostics Feel free to ask further questions. Inspection and testing are possible by arrangement.

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Laedpew Dc Niofx Aaboh Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: used, Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, table load: 5,000 kg, spindle diameter: 110 mm, total height: 3,800 mm, total length: 5,000 mm, total width: 3,000 mm, table length: 1,520 mm, table width: 1,225 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 2,000 mm, Tool holder SK50, Heidenhain control, machine is ready for collection and immediately operational. Lasdpfxjxga Tnj Aabsh

Condition: new, Year of construction: 2025, CORMAK Z7016A Vario Bench Drill for Metal – Precision Pillar Drill with Stepless Speed Control The CORMAK Z7016A Vario bench drill is a compact and functional pillar drill for metal, designed for precision drilling operations in professional and workshop applications. Featuring stepless speed control, a robust construction, and versatile equipment, this model ensures maximum control over the drilling process and high work efficiency. Key Features Stepless speed regulation – speed range from 440 to 2600 RPM allows optimal adjustment to the material being processed. Durable cast iron construction – provides high rigidity and reduces vibrations during operation. Adjustable worktable – tiltable from -45° to +45° and height-adjustable via rack-and-pinion system. Laser guide and LED lighting – ensure maximum drilling precision and user comfort. Electronic speed display – enables full real-time control of parameters. 65 mm vice included – the machine is ready to work right out of the box. Construction and Technology The Z7016A Vario bench drill for metal is built on a solid 60 mm diameter column and a rigid 345 × 210 mm cast iron base. The machine’s body and worktable are made from precisely machined castings. The MT2 taper allows a wide range of tool fittings, while the 60 mm spindle travel enables deep hole drilling. With an overall height of just 870 mm, the unit is exceptionally ergonomic and portable. Precision and Performance Thanks to its 500 W (S1) / 650 W (S6) motor, the CORMAK Z7016A Vario pillar drill allows efficient drilling in metal up to 16 mm in diameter. No need for manual gear changes – stepless speed adjustment significantly shortens setup time. The ergonomic three-arm feed handle, depth gauge, and precise spindle guidance system ensure high repeatability and hole accuracy. Applications The Z7016A Vario is a metal bench drill recommended for: Locksmith and repair workshops Maintenance departments Technical schools Small production lines and prototyping facilities Standard Equipment 65 mm vice Laser drilling guide LED work area lighting Electronic speed display Three-arm feed handle Lasdpfx Asxbzuvoabjh Tilting table with rack-and-pinion height adjustment Technical Specifications Parameter Value Max drilling diameter 16 mm Spindle speed range 440 – 2600 RPM Power supply 230 V Spindle taper MT2 Max spindle travel 60 mm Spindle-to-column distance 125 mm Spindle-to-base distance 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1 / S6) 500 W / 650 W Total height 870 mm Weight 31.5 kg

Condition: new, Siemens 6GK5873-0AA10-1AA2 router, serial number as shown in photo, unused in sealed original packaging, 100% functional Lasdpfx Aajxagufjbeh

Condition: new, bore capacity in steel (diameter) 25 mm throat 240 mm bore stroke 110 mm turning speeds 125 - 2850 U/min 310 x 320 mm distance drilling head - clamping area max. 650 mm total power requirement 0,75 / 400 kW / Volt weight of the machine ca. 0,175 t Lasdsfhk Ubjpfx Aabsh dimensions 0,95x0,8x1,75 inkl. Tisch m

Condition: new, bore capacity in steel (diameter) 20 mm throat 180 mm Laedpfjupxkdsx Aaboh bore stroke 82 mm turning speeds 220 - 2840 U/min 290 x 290 mm total power requirement 0,55/0,75 kW / Volt weight of the machine ca. 54 Kg dimensions 820 x 500 x 290 mm CE-tested spindle hood. Keyless chuck (1 to 16 mm) Tilting work table. Depth stop.

Condition: used, bore capacity in steel (diameter) 23 mm throat 310 mm Lajdpfovkixrex Aabsh bore stroke 150 mm turning speeds 90 - 2000 U/min 420 x 360 mm total power requirement kW / Volt weight of the machine ca. 650 Kg dimensions 1,2 x 0,8 x 2,4 mm Bench drill - Left/right rotation - Advance - Base frame

Condition: used, bore capacity in steel (diameter) 20 mm throat 155 mm bore stroke 80 mm turning speeds 50 - 3100 U/min 310mm mm total power requirement 1,5 / 400 kW / Volt tool taper 2 weight of the machine ca. 70 Kg dimensions 0,6 x 0.4 x 9,9 mm Laedpfxotnl Eus Aabjh Bench drill - Rotating and swiveling table

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 145 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,12 t Lajdpfokxhqnjx Aabeh dimensions of the machine ca. 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm Lajdpfefg U Thjx Aabjh tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t Laodpfx Aaofg U Tijbeh dimensions 0,4 x 0,5 x 0,9 m precise bench drill: - Large speed range - Programmable thread cutting - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection

Condition: new, bore capacity in steel (diameter) 14 /15 mm throat 180 mm Lajdpfx Ajfg U Tgsabjh bore stroke 70 mm turning speeds 420 - 2100 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 0,5/1,0 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Table Drilling Machine with: variable feed Tapping function. depth display Coolant system Belt-drive spindle protection machine light

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 145 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK connected load frequency 230 V bore capacity in steel 16 mm throat 169 mm quill stroke 50 mm turning speed range - drilling 50 - 2250 U/min spindle drive 0,5 kW total power requirement 0,75 kW weight of the machine ca. 0,175 t dimensions of the machine ca. 1,3 x 0,65 x 1,3 m 3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Lasdpfovdld Dox Aaboh Tool box, instruction manual.

Condition: new, bore capacity in steel (diameter) 20 mm Lsdpfsiiq S Nex Aabsah throat 195 mm bore stroke 80 mm boring spindle MK 2 table surface area 320 x 300 mm total power requirement 0,75 kW weight of the machine ca. 0,072 t dimensions of the machine ca. 0,7 x 0,4 x 1,1 m

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 1,1 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,3 x 0,6 x 1,3 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Laedpjupxpmjfx Aabsh Forage protection Set of wheels. Appropriate tools.

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm turning speeds 125 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 1,25 x 0,6 x 0,6 m Speed in 6 levels 125 - 2000rpm. Lajdpfx Aeupxctoabeh 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.

Condition: new, turning diameter over bed 280 mm turning diameter over slide rest 158 mm turning length 600 mm turning speeds 45 - 2000 U/min centre height 140 mm spindle bore 26 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,25 - 2,5 mm thread - inch 6 - 96 TPI connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,16 t dimensions of the machine ca. 1,26 x 0,58 x 0,60 m Professional metal lathe, gearing machine - 3-jaw chuck Laodpfovu Hansx Aabsh - 4-jaw chuck - hardened bed tracks - Clamping plate - 4-way chisel holder - Feed protection - standing and rotating bezel - Splash guard - Machine light

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm Laedpfx Aaevn U Efobeh turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 1,1 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,3 x 0,6 x 0,65 m Benchtop lathe 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. Base cabinet is optional!!

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 700 mm turning speeds 115 - 1620 U/min centre height 125 mm spindle bore 27 mm tailstock quill taper MT 2 Lodpfx Aaef Nb Hksbjah tailstock quill stroke 40 mm metric threading 0,2 - 3,5 mm thread - inch 8 - 56 inch. thread - module 0,2 - 12,5 mm swival range +/- Oberschlitten 45 ° connected load frequency 400 V total power requirement 0,75 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,41 x 0,61 x 0,41 m Equipped with - 27 mm spindle clearance - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection

Condition: new, turning diameter over bed 290 mm turning diameter over slide rest 170 mm turning length 750 mm turning speeds 75 - 2000 U/min centre height 145 mm spindle bore 38 mm tailstock quill taper MT 3 MK tailstock quill stroke 80 mm connected load frequency 230 V total power requirement 1,5 kW Ljdpfxevxw Hte Aabeah weight of the machine ca. 0,34 t dimensions of the machine ca. 1,3 x 0,75 x 0,7 m Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools.

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 20 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,4 - 3,0 mm thread - inch 10 - 44 TPI Lajdpsrfd Thofx Aaboh thread - module 0,2 - 12,5 mm connected load frequency 230 V total power requirement 1,0 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 700 mm Lsdpfx Ajf Nb Hgeabeah turning speeds 115 - 1620 U/min centre height 125 mm spindle bore 27 mm tailstock quill taper MT 2 tailstock quill stroke 40 mm metric threading 0,2 - 3,5 mm thread - inch 8 - 56 inch. thread - module 0,2 - 12,5 mm swival range +/- Oberschlitten 45 ° connected load frequency 400 V total power requirement 0,75 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.