Used Benford Tv 1200 for sale (5,873)

Condition: used, Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1600 mm Free frontal opening L-R: 4550 mm Table surface area : 4500 x 2700 mm Slide area: 4500 x 2700 mm Die cushion capacity in table: 225 ton Die cushion stroke: 200 mm Number of strokes: 9 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 344 ton Standard configuration Pin distance 150 mmPin Diameter 50 mm Rsdpfx Ameyw Rvqenjw

Condition: used, Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1250 mm Rodpsyw R Adofx Amnjw Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2700 mm Slide area: 3500 x 2700 mm Die cushion capacity in table: 240 ton Die cushion stroke: 250 mm Ejector in ram: 95 ton Ejector stroke in ram: 150 Number of strokes: 10 - 16 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 280 ton Standard configuration Pin distance 150 mmPin Diameter 50 mm

Condition: good (used), Code: 0270 Brand: EMME ELLE Model: G.L.C. 1200 - CE Standard Longitudinal glue jointing machine for veneer - CE Standard The longitudinal jointing machine allows a perfect jointing of two veneer sheets in one operation by using a patentedsystem for the glue application. The machine is equipped with two tanks for the mass glue application. This innovation grants high quality and high jointing finishing since the glue is simultaneously applied on both edges to be jointed. The advantages of this type of glue processing are the following: 1_higher working speed (the machine can reach a speed of 35/40 mt/min with some wood types.) 2_In case, for any reason, no glue is applied on one of the two edges, the jointing is anyway granted since the glue is applied on the other edge as well. 3_A high resistant jointing is granted by applying the glue on both edges, since the two sheets are jointed with glue to glue and not with glue to wood. Technical characteristics Veneer sheet dimensions Thickness mm 0.4-2 Min. Length mm 360 Min. Width mm 45 Max. Width mm 1200 Technical Characteristics Heating area length mm 1200 Heating temperature up to 240° Transport speed 10-40 m/min Glue type UREA Power connection 6 Kw Voltage 400 V / 50 Hz Rjdpfx Amoymfxqjnew Machine dimensions Length mm 2600 Width mm 2000 Height mm 800 Weight Kg. 2000

Year of construction: 2024, condition: new, - 50 mm cutting height - 1210 mm cutting width - 12 driven rollers - 10 - 30 m/min variable feed rate - 37 KW Sawing Motor (more is possible) Redpfxofdzrhs Amnew - 2,2 KW Feed Gearbox - 70 mm Sawing spindle - 225 mm Circular Saws - 4000 Kg weight of the machine

Condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track -Roller conveyor: with tilting function, without hydraulic unit -Speed: 14 m/min -Roller width: 1200 mm Rsdpfx Ajuhr S Domnew -Roller diameter: 110 mm -Axle spacing: 150 mm -Conveyor length: 2800 mm -Tilt function: hydraulic, approx. 20° -Wooden board: 2500 x 1700 mm -Overall dimensions: 3100/2300/H2000 mm -Weight: 1180 kg

Condition: used, mileage: 5,82,000 km, power: 390 kW (530.25 HP), first registration: 01/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MERCEDES-BENZ ACTROS 1853 GIGASPACE – STAND-ALONE AIR CONDITIONING – ALCOA – ALUMINUM WHEELS – TV – FULL CAB TRIM – ----VEHICLE HISTORY – VEHICLE, 1ST OWNER Rsdezdxb Sspfx Amnsw – VERY WELL-MAINTAINED VEHICLE – EXTENSIVE MAINTENANCE AND SERVICE HISTORY AVAILABLE – REGULAR INSPECTIONS EVERY 50,000 KM – VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT – GIGASPACE CAB – AUTOMATIC TRANSMISSION – RETARDER – CRUISE CONTROL – DISTANCE CONTROL – LANE KEEPING ASSISTANT – BLIND SPOT ASSISTANT – ACTIVE BRAKE ASSIST – STAND-ALONE AIR CONDITIONING – STAND-ALONE HEATER – AIR CONDITIONING SYSTEM – FULL CAB TRIM – ALCOA ALUMINUM WHEELS – LEATHER SEAT (DRIVER’S SIDE) – XENON HEADLIGHTS – AUXILIARY DRIVE – NAVIGATION SYSTEM – HANDS-FREE SYSTEM – ON-BOARD COMPUTER – REFRIGERATOR – 2 BUNKS – COMFORT SEATS – HEATED SEATS – TV / TELEVISION – FULL AIR SUSPENSION – 2 TANKS – ADBLUE MAINTENANCE & SERVICE – MAJOR INSPECTIONS PERFORMED REGULARLY – ENGINE OIL AND FILTER REPLACED – OIL PAN REPLACED – GEAR OIL AND REAR AXLE OIL REPLACED – BOTH NOX SENSORS REPLACED – STEERING PUMP REPLACED – STEERING SPINDLE AND UNIVERSAL JOINT REPLACED – ALL AIR SPRINGS OF THE REAR AXLE REPLACED – SHOCK ABSORBERS, SPRING STRUTS, AND BUSHINGS OF THE REAR AXLE REPLACED – KINGPIN REPLACED – ADBLUE FILTER REPLACED – COOLANT REPLACED – TECHNICAL INSPECTION PERFORMED – EXTENSIVE WEAR PARTS ALREADY REPLACED ADDITIONAL INFORMATION – MILEAGE: 582,000 KM – TIRE SIZE FRONT: 385/55 R22.5 MICHELIN – TIRE SIZE REAR: 295/60 R22.5 – TIRES IN GOOD CONDITION – TECHNICAL INSPECTION + SAFETY INSPECTION + §57B TACHOGRAPH VALID UNTIL 04/29/2026 – UVV + AU + TÜV VALID UNTIL 12/2025 – TECHNICAL INSPECTION VALID UNTIL 06/2026 – VEHICLE IMMEDIATELY AVAILABLE – VEHICLE IMMEDIATELY READY FOR USE ---- EXPORT / NOTE EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 EXPORT REGISTRATION EXW POSSIBLE IN 10 MINUTES (AUTHORIZED EXPORTER). VEHICLE RESERVATIONS ONLY ACCEPTED IN WRITING. VERBAL AGREEMENTS ARE NON-BINDING. SUBJECT TO CHANGES, ERRORS, AND PRIOR SALE. LEGAL NOTICE THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER WITHIN THE MEANING OF SECTION 145 OF THE GERMAN CIVIL CODE (BGB). IT SERVES SOLELY AS A BASIS FOR NEGOTIATIONS. ALL INFORMATION IS PROVIDED WITHOUT WARRANTY. NO GUARANTEED PROPERTIES. SALE IS EXCLUSIVELY SUBJECT TO OUR TERMS AND CONDITIONS.

Condition: reconditioned (used), - NEW Eddy current separator, Wagner type - with vibrating feeder - feeder width 1200 mm Redpfx Aezfgtfomnjw - overhauled condition

Condition: good (used), Year of construction: 2013, Inclined belt conveyor / belt conveyor, powered, approx. 16.40 m length, belt width 59 cm, Transnorm – used – Price ex-works (net): €1,395! Manufacturer: Transnorm Year of manufacture: 2013 Type: 1200 belt conveyor with central drive Rjdowxu I Topfx Amnow Element length: approx. 6.80 m / angled segment 9.80 m Element width: approx. 70 cm Belt width / nominal width: 59 cm Element height: approx. 8 cm Condition: good Availability: immediately Location: Warehouse Frankenberg / Saxony

Condition: good (used), Year of construction: 1999, Accordion roller conveyor / scissor roller conveyor, Gura, extended length 4.20m, mobile – used - : Price ex-location: €650 (net), disassembled, packed and loaded! Redoy Aiyropfx Amnjw Manufacturer: Gura Type: 1200 – 524 – 3SVX Year of manufacture: 1999 Length extended: approx. 4.20m Length retracted: approx. 1.30m Width: approx. 53cm Height (height-adjustable): currently approx. 80cm Roller length: approx. 11cm Mobile on castors The scissor conveyor is extendable, suitable for curves, and its length is variable. Condition: good Availability: immediately Location: Storage site, Frankenberg, Saxony The scissor conveyor is extendable, can be steered through curves, and is variably adjustable in length.

Condition: good (used), Year of construction: 1996, approx. 4x belt conveyor, Transnorm, approx. 1m long - second-hand - : Price per piece ex location (net): only 595.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos1+2+21+22 Manufacturer: Transnorm Type: TS 1200 Belt conveyor / Type: 1600-105 Year of construction: 1996 Element length: 100cm Element width: approx. 50cm Belt width: approx. 40cm Motor: SEW Condition: good Redpfju Ezyuox Amnsw Available immediately Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: good (used), Year of construction: 2007, approx. 4x belt conveyors, Transnorm, approx. 0.80m long - second-hand - : Price per piece ex location (net): only 595.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos10+14+18+20 Manufacturer: Transnorm Redpsu Ezzrsfx Amnsw Type: TS 1200 Year of construction: 2007 Element length: 800mm Element width: approx. 50cm Belt width: approx. 40cm Belt type: KT 217 Belt length: 1675mm Motor: SEW Condition: good Available immediately Location: CZ, Bor, later stock Frankenberg / Saxony

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Hygiene airlock MOHN Model: SWD 1200 with boot cleaning system Year of manufacture: 2008 Good condition Shipping possible Rjdpjzdf Rzjfx Amnow

Condition: good (used), machine/vehicle number: 3456, Year of construction: 2008, load capacity: 25,000 kg, lifting height: 5,500 mm, mast type: duplex, fork carriage width: 250 mm, fork length: 2,400 mm, total length: 6,200 mm, total width: 3,100 mm, operation weight: 35,400 kg, additional equipment features: Front mud guards, Weight system, Warning triangle, Dual tread, Equipment: lighting, SMV SL25-1200 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 14.00-24 Redpfx Ajyuikajmnow Wheel size – Steering wheel: 14.00-24

Condition: used, mileage: 5,54,000 km, power: 353 kW (479.95 HP), first registration: 07/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, * Stationary air conditioning * Retarder * 2 tanks * High bar lamp bracket * Television Redszd Ikiopfx Amnjw * Navigation system * Fully air-suspended * Spoiler * Sun visor * Automatic transmission * Euro 6 emission standard

Condition: refurbished (used), Year of construction: 2019, General overhauled fully automatic indexing rotary table with 6 work spindles and 4 polishing stations, each with 5.5 KW inverter drive power, all polishing stations with two-axis motorized wheel feed and lift, new control cabinet with Siemens PLC control, HMI and LED control panel, CE conformity possible, HMI in English possible Rjdpfx Amjipqwljnew

Condition: new, -Baking sheet, 800 x 1200 mm, made of reinforced corrugated aluminum. -130 sheets in stock. Rsdpfxezfzize Amnew -10 cavities. -Equipped with reinforcing bars for improved rigidity during use. -Professional format, suitable for bakery and pastry ovens. -Corrugated structure designed to support products during baking. -Durable and practical accessory for regular use in the laboratory.

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1200-5 /0.9 +Controller +TPU DEMO ROBOT as new DEVELOPMENT OF GSG ROBOTICS Rsdpsxq Tu Tefx Amnjw GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: good (used), Sepamatic 1200 Bone Separator, This machine removes the meat/flesh from the bone. It is an ideal item of machinery for the meat and fish industries. Redpfx Ajzf Iv Iemnow

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm Redpfoy T Eb Tjx Amnew External turning radius: 6,000 mm Overall height: 10,490–19,710 mm Side clamps Sideshift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rear-view mirrors (high mounted) Variable piston pumps with return flow filter (10 µm) Joystick control with power steering Pressure accumulator for lift mast (60 bar / 2 liters) LED lighting (position, indicator, work, and rear lights) Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 wipers, ventilation, opening side windows Electric 24V socket (10A), internal rear-view mirror, coat hook Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps Central lubrication system 'Lincoln' Reversing camera (MOTEC, 6.7" color display, heated lens) Fire extinguisher (6 kg, mounted externally on the left) Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM Operating manual, driver’s handbook, spare parts catalogue

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000with Siemens Sinumerik 810D Cycle Control (Teach-In)The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work.Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors.Working AreaDistance between centers: 3,000 mmSwing diameter over bed: 1,200 mmSwing diameter over cross slide: 850 mmCross slide travel: 620 mmBed width: 750 mmSpindleSpindl e nose: DIN 55027 size 11Spindle diameter front bearing: 190 mmSpindle bore: 104 mmSpeed range: 5 – 900 min⁻¹Max. torque: 6,000 NmMain DriveDrive power: 37 / 52 kW (100% / 60% duty cycle)FeedX-axi s feed force: 24,000 NZ-axis feed force: 16,000 NRapid traverse X: 7 m/minRapid traverse Z: 4 m/minTool HolderTurning tool cross-section: 40 × 40 mmElectrical DataSupply voltage: 400 VFrequency: 50 HzMax. current consumption: 200 AWorkpiece Weights(Manufacturer specifications for standard configuration)Between centers without steady rest: 5,000 kgBetween centers with 1 steady rest: 6,000 kgBetween centers with 2 steady rests: 7,000 kgFlying in faceplate: 1,800 kgChip Conveyor2 x AME Chip ConveyorsManufacturer: AME GmbH, EmsdettenType: S8 300 Tlg. 63Year of manufacture: 05/2016Not Included:TailstockSteady restsNoteThe machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Serial number: 990101 Tip width: 3000 - mm Year of construction: 2,000 Condition: in working order Redpfjzdd E Rex Amnjw Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rapid traverse Z-axis: 48,000 m/min, controller model: Mitsubishi Meldas MSC-802M, The MORI SEIKI TV-30 is a compact and precise vertical machining center, designed for drilling, tapping, and milling operations on small components. Manufactured in 1996, it is equipped with a Mitsubishi Meldas MSC-802M control and features characteristics ideal for high-speed light machining work, with an automatic tool changer and a well-sized table relative to its compact footprint. General Technical Data Brand: MORI SEIKI Model: TV-30 Category: Vertical Machining Centers Year of manufacture: 08-1996 CNC Control: Mitsubishi Meldas MSC-802M Machine weight: 2 tons Machine Dimensions: Length: 1,200 mm Width: 1,720 mm Height: 2,260 mm Spindle Spindle speed: 8,000 rpm Spindle motor power (cont./30 min): - 3.7 / 2.2 kW (continuous) - 5.5 / 3.7 kW (30 min) Machining Capacity X-Axis travel: 420 mm Y-Axis travel: 300 mm + 60 mm Z-Axis travel: 250 mm Maximum drilling diameter: 13 mm Maximum tapping diameter: M12 Table Table size: 600 x 340 mm Table load capacity: 150 kg Feed Rates Rapid traverse X / Y / Z axes: 48,000 mm/min Working feedrates X / Y / Z in linear interpolation (max): 12,000 mm/min Manual feedrates: 0 – 1,260 mm/min Tool Changer Rjdpfxoxfaw Do Amnew Tool taper: BT-30 Shank: MAS-P30T-1 45° Tool magazine capacity: 10 stations Max. diameter of adjacent tools: Ø 80 mm Max. tool length: 200 mm Max. tool weight: 3 kg Other Equipment Manuals, Electrical Schematics and CE Declaration 100-liter coolant tank with pump Transformer

Condition: used, mileage: 7,09,800 km, power: 355 kW (482.67 HP), first registration: 02/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, DAF XF 480 LOWLINER Rsdsx E Imvjpfx Amnew Super Space Cab cabin, intarder, CD radio with Bluetooth and navigation system, refrigerator box, external sun visor, spoiler, sky lights, 2 fuel tanks – 690 litres + 400 litres, lane assist, adaptive cruise control, EURO 6C, multifunction steering wheel, TV, 2 beds, parking air conditioning and parking heater, 2 electric windows, electric mirrors, ABS. Tyres: Front axle: 315/60R22.5 Rear axle: 295/60R22.5

Condition: used, Year of construction: 2009, operating hours: 3,483 h, functionality: fully functional, total length: 5,550 mm, total width: 2,250 mm, bar diameter (max.): 95 mm, overall weight: 8,400 kg, Max. workable diameter from bar mm 95 Max. workable diameter from recovery mm 500 Max. workable length mm 1250 Max. rotating diameter mm 700 MAIN ELECTROSPINDLE: Variable rotation range rpm 40-2800 ASA spindle nose 8" Spindle hole mm 111 Internal diameter of bearings mm 150 Self-centering diameter mm 315 Motor power kW 30 TAILSTOCK TO FOLLOW: Positioning stroke mm 1,100 Quilt stroke mm 150 Quilt diameter mm 115 Redpfx Aevv Ud Romnew MOTORIZED ELECTROSPINDLE HEAD: Type of attachment HSK-63 Max. revolutions RPM 6,000 Electrospindle motor power Kw 9 B AXIS UNIT: Total rotation range 205° Rotation range beyond the tailstock axis 15° Rotation range beyond the spindle axis 10° Angular position with mechanical block Every 5° CROSS SLIDE Max. Z stroke mm 1300 Max. X stroke mm 520 Max. stroke Y mm 210 (+120 – 90) TOOL MAGAZINE Magazine capacity 40 pos Max. diameter of tools with adjacent tools mm 80 Max. diameter of tools without adjacent tools mm 140

Condition: good (used), Refurbished machine *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Redpfx Ao E Dqusmnsw Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer -Transformer: from CNC machining center Mikron VC500D -Type: PTNo.. PTC 2500/139 Redpfx Amjy Tv S Aonsw -Power: 1200 VA -Dimensions: 215/210/H255 mm -Weight: 30.2 kg