Used Bevel Gear Tester for sale (12,015)

Condition: excellent (used), 3x identical bevel gear planing machines, type H12, with accessories. Maximum gear diameter 130 mm. Maximum module 2.5. With change gears. Includes operating manual. Ihedpewb Uxwsfx Adwst

Condition: ready for operation (used), Gear Grinding Machine STANKO 5A851 Module 2-10 Gear diameter 35- 320 mm Number of teeth 10- 120 Gear width 220 mm Maximum angle of the ground teeth 45 degrees Spindle speed 2650 rpm Distance between centers 300-360 mm Ihsdpfouc T Ivex Adwjt Dimensions 3170x1820x1820x202020mm Machine weight aprox 7 to

Condition: like new (used), Specifications Manufacturer GLEASON Model 104 Condition Used Serial Number 631406 Stock Number DCN1749 Max working diameter 432 mm Module max 8,5 Description Ihsdpfjxtpk Asx Adwet Equipped with change gears books

Condition: good (used), Year of construction: 2002, max. wheel diameter 275 mm gear width 55 mm max. module 6 min. module 1 Control 840 C Siemens total power requirement 100 kW weight of the machine ca. 16,7 t dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m Iodotumrpopfx Adwjht

Condition: excellent (used), max. wheel diameter 200 mm gear width 300 mm module 0,5 - 25 centre distance 750 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 0,8 x 0,6 x 0,6 m Isdpfew Ny Ulox Adwsht worm testing roll-machine

Condition: used, The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies for noise and contact pattern testing on bevel and hypoid gears. Technical Data • Diameter: 540 (400) mm • Hypoid: ±50 mm • Pinion spindle diameter: 90 mm • Dimensions (LxWxH): 1,800 x 1,800 x 1,600 mm • Machine weight: approx. 2,800 kg *Information and data are provided without obligation. Subject to prior sale. Special Features: The machine is intended for noise and contact pattern testing on bevel and hypoid gears of all gear types. By simulating operational conditions, applying various rotational speeds, and switching load states between drive and coast, the optimal installation distance for standstill can be determined. • Digital actual value display for 2 axes • Infinitely variable speed adjustment via frequency inverter • Electrically secured and removable safety guard • Accessories: Large number of workpiece holders • Condition: Very good Ijdpfsxpq Nlox Adweht

Condition: used, Year of construction: 1980, max. wheel diameter 1010 mm Ihedpet Hwniefx Adwst gear width 0 mm max. module min. module total power requirement 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 291127, wheel diameter: 275 mm, wheel width: 55 mm, controller manufacturer: Siemens, controller model: 840 C, Face Milling - Single Part Process - Continuous Process: - The workpiece and tool (usually Spiron) rotate simultaneously, and all teeth are machined simultaneously in a single operation. - The cutter head has multiple cutter groups (not arranged in a circle) - Parallel tooth height - Conical tooth tip surface Single Part Process: - The workpiece is stationary, and the tool (usually Arcon) rotates and cuts a tooth by plunging the tool. - Once a tooth is cut, the tool moves back out of the tooth, the workpiece continues to cut by one tooth width, and the next tooth is cut until all teeth are finished. - The cutter head has all cutters arranged on a circular path. - Conical tooth height - Parallel tooth tip surface The C28 can handle both gear and pinion. For the single part process, a C28 must be "prepared" - i.e., a direct measuring system + part gear brake, workpiece axis + license file for manufacturing single part processes. TECHNICAL DETAILS Iodpfx Adjv I Ud Ijwsht Control: Siemens 840 C Wheel diameter: max. 275 mm Wheel width: 55 mm Module: 1.5 - 6.5 Helix angle: 0-60° Number of teeth: 6-120 mm Gear ratio: 1:10 - 1:1 Cutter head radius: 62 - 110 mm Number of knife groups: 5-19 (Oerlikon) Travel X / Y / Z: 500 / 885 / ±185 mm Motor speed per axis: 2400 rpm Ratio X / Y / Z: 3:1 Spindle pitch per axis: 10 mm Movement range E / V-axis: -5° to 95° / ±7.5° Motor speed E / V-axis: 400 / 900 rpm Travel E/V-axis: 1800 / 1098 °/min E/V-axis gear ratio: 80:1 / 1:1 A/B-axis mounting diameter: 130 / 140 mm A/B-axis spindle speed: 667 / 345 rpm Permissible A/B-axis motor speed: 10,000 / 4,500 rpm A/B-axis gear ratio: 15:1 / 13:1 V1-axis travel: 85 - 225 mm V1-axis travel speed: 6 m/min V1-axis motor speed: 1800 rpm V1-axis spindle pitch: 5 mm U-axis travel: 112 - 258 mm U-axis travel speed: 0.6 m/min U-axis gear ratio: 4.3:1 U-axis motor speed: 3000 rpm U-axis spindle pitch: 5 mm MACHINE DETAILS Weight: 13 t Space requirement: 5.2 x 2.3 x 2.4 mm Power requirements: 3 x 400V, 50 Hz, 90 A Transport weight: 16.5 t

Year of construction: 2016, condition: new, 1 piece unused industrial bevel helical gearbox in original packaging Manufacturer: Flender Type: B3SH size: 17 Type: F Maximum torque: 130.000 Nm Gear ratio: i= 25.409 max. power: 800 kW oil filling: 290 liters speed: n1= 1500 1/min Speed: n2= 59.03 1/min Iodpfxsmczixs Adwjht weight: 5450 Kg Shaft diameter d1: 1 x 110mm Shaft diameter d2: 2 x 250mm Shaft height h1: 550 mm total height h2: 1290mm Length from base: 1740mm width without shafts: 690mm width with 2x shaft: 1650 mm Gearbox has oil circulation lubrication Ø50mm backstop, thermometer, 2x heating element 1800 Watt / 230Volt Dimension of the shipping box length: 2790mm width: 1950mm Height: 1930mm Weight with packing: 6.099kg

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1,5 total power requirement 62 kW weight of the machine ca. 12 t dimensions of the machine ca. 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° Ihodpeul Etdofx Adwjt - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 986003, grinding wheel speed: 6,000 rpm, tool diameter: 230 mm, travel distance X-axis: 325 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 470 mm, TECHNICAL DETAILS max. gear ratio: 10:1 Number of teeth: 3 - 200 Tooth height: 20 mm Tooth width max.: 58 mm Control: SIN 840 D SIEMENS Axes X-axis: 325 mm Y-axis: 350 mm Z-axis: 470 mm B-axis: +90.1° / -1° Spindle Grinding spindle speeds: continuously variable up to 6,000 rpm Workpiece spindle speed: 1,200 rpm Tool Max. tool diameter: 230 mm Min. tool diameter: 69.85 mm Table diameter: 212.71 mm MACHINE DETAILS Total power requirement: 75 kW Machine weight: approx. 10,000 kg Space requirement: approx. 6.10 m x 4.40 m x 3.30 m Transport dimensions machine: 4 x 2.5 x 2.85 m / 11 t Transport dimensions water tank: 3.55 x 2.41 x 2.5 m / 1.8 t Transport dimensions cooler: 1.5 x 0.8 x 1.1 m / 0.2 t Ihjdpov Rcn Hjfx Adwst Transport dimensions sheet metal: 2.5 x 1.1 x 0.8 m/ 0.25 t EQUIPMENT - Coolant filter system Hoffmann HSF 100 V

Condition: ready for operation (used), Manufacturer MODUL Model ZFTKK 500/2 W Condition Used Tilting of hob spindle 0....8 gradi Hob spindle speed 45-224 giri/min Max workable diameter 540 mm Maximum module 16 Max tooth range 78 mm Range no. teeth 6....100 Machine weight 12000 Kg Iodpev Rpq Isfx Adwjht *Roughing and finishing machine*

Condition: used, Year of construction: 1997, max. wheel diameter 215 mm gear width 40,65 mm max. module total power requirement 20 kW weight of the machine ca. 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Ihodpfxst Hwxhs Adwot Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Ihjdpjrgahxofx Adwet

Condition: new, Year of construction: 2003, functionality: fully functional, overall weight: 1,760 kg, total length: 2,400 mm, total width: 780 mm, total height: 810 mm, gear ratio: 16, torque: 37,700 Nm, shaft diameter: 90 mm, hollow shaft diameter: 170 mm, 1 unused industrial slip-on bevel-helical gear for conveyor belt drives. Manufacturer: Flender Penig Type: 14LA0-355x16 el380t TGL37088 Rated power: P = 257 kW Torque: 37,700 Nm Ratio: i = 16 (15.8351) Speed n1: 1,000 rpm Speed n2: 62.5 rpm Input shaft diameter: 90 mm x 170 mm Output shaft: Hollow shaft Ø170 mm 0 = Shaft end right 355 = Size 16 = Ratio e = Anti-reverse device (input shaft rotation right) l = Fan 380 = Pump and fan voltage in volts t: 2 TPM resistance thermometer temperature monitors Hydraulic pump: 1.5 kW Fan: 0.75 kW Dimensions: Length with fan: 2400 mm Width: 780 mm Height: 810 mm Ijdpfx Aowmlduodwjht Weight with fan: 1760 kg The 14 LA series bevel helical gear units are three-stage gear units with hardened gears and welded housings. The shafts are mounted in roller bearings. The low-speed shaft is designed as a hollow shaft. The torque is transmitted from the hollow shaft to the connecting shaft via cones and keyways. The gear units can be operated in both directions of rotation. The gear units can be mounted on the right or left side without any modification to the gearbox.

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm max. number of teeth 200 min. number of teeth 6 x-travel 300 mm X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Y - Axis speed 0,1-5.000 mm/sec. A - axis -170 / +170 ° control Siemens Sinumerik 840 C total power requirement 38 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,20 x 2,20 x 2,10 m Iedpfeul El Tox Adweht incl. suction

Condition: good (used), Year of construction: 2001, operating hours: 31,789 h, functionality: fully functional, machine/vehicle number: 291545, travel distance X-axis: 70 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, gear diameter: 500 mm, helix angle: 90 °, 3-axis CNC testing machine for fully automatic hard and soft testing of spiral and hypoid bevel gears with an axis angle of 90° TECHNICAL DETAILS Bevel gear analysis: ROTEC T50 GA2 Color unit: Binks Iedpfsvrd T Tex Adwsht X-axis: ±70 mm Y-axis: 200 mm Z-axis: 200 mm CNC control: GE FANUC Series 160i-M Technical specifications Wheel diameter: max. 500 mm Pinion diameter: max. 400 mm Circular gear diameter: max. 500 mm Axis angle: 90° Speeds Speed range R: 0 - 3,000 rpm Speed range T: 0 - 5,000 rpm MACHINE DETAILS Rated current: 30 kVA Machine weight: approx. 6.2 tons Space required: approx. 3.2 m x 2.5 m x 2.3 m

Year of construction: 2016, condition: new, 1 piece reconditioned unused industrial bevel helical gearbox from ASUG. TGL 21815 All parts of the gearbox are renewed, except the housing !!! Claw coupling: 800 mm (only one half available) Maximum torque: 27.829 Nm Gear ratio: i= 1:80 max. power: 51 kW oil filling: 170 kg Speed: n1= 1400 Speed: n2= 17,5 weight: 1450 Kg Shaft diameter d1: 65mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Iodpfxjgwlrds Adwoht Total height h2: 925mm Length from base: 1170 mm !! Gearbox has no oil cooler !

Condition: good (used), Year of construction: 1972, max. wheel diameter 80 mm gear width 60 mm max. module 3 min. module 0,1 Ihjdjw N S D Sopfx Adwet total power requirement 0,4 kW weight of the machine ca. 120 kg dimensions of the machine ca. 0,6x0,6x0,75 m

Condition: used, Year of construction: 2006, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm spindle speeds (infinitely variable) 6000 U/min work piece spindle speed 1200 U/min diameter of tools max. 230 mm diameter of tools min 69,85 mm Ihodjvxwr Ajpfx Adwst x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° work piece table - Ø 212,71 mm Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m coolant filtering unit Hoffmann HSF 100 V

Condition: used, max. wheel diameter 0-200 mm max. module 25 min. module 0,5 Iodpjtuxa Ujfx Adweht

Condition: used, Year of construction: 2002, max. wheel diameter 275 mm max. module 6 min. module 1,5 Control SINUMERIK 840 C tooth width 5,5 mm spiral angle min. 0 / max. 60 ° max. number of teeth 120 min. number of teeth 5 ratio of transmission 1:10 min. ratio of transmission 1:1 Iedpfx Adovxwnwewjht work piece spindle speed max. 110 U/min blade head turning speeds 20 - 110 U/min total power requirement 100 kW weight of the machine ca. 16,7 t dimensions of the machine ca. 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, spindle speed (max.): 110 rpm, wheel diameter: 275 mm, TECHNICAL DETAILS Max. gear diameter: 275 mm Module range: min. 1.5 / max. 6 Tooth width: 5.5 mm Helix angle: min. 0° / max. 60° Number of teeth: min. 5 / max. 120 Gear ratio: min. 1:1 / max. 1:10 Drive & Control Control: SINUMERIK 840 C Max. workpiece spindle speed: 110 rpm Cutter head speeds: 20 - 110 rpm Total power requirement: 100 kW Ihsdpfjv Rc Srex Adwot Machine weight & dimensions Machine weight: approx. 16.7 t Space requirement: approx. 5,200 x 2,300 x 2,400 mm EQUIPMENT - Deburring device U-axis / Q-spindle - Chip conveyor - Coolant system - ELBARON electrostatic air cleaner - No tools or workpiece clamping devices

Condition: used, Year of construction: 2007, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm diameter of tools min 69,85 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm Ihedpovxwnqefx Adwot z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control 160 i - MB FANUC total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI With EWAB robot cell (KUKA robot) without coolant filter system Fire extinguishing system without CO2 bottles Cooling oil return with various pumps / collecting basins Threading device A1/B2 axes with measuring probe Clamping device for a pinion shaft External spindle oil cooler Extraction system "pinion shaft"

Condition: used, Year of construction: 2005, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm diameter of tools min 69,85 mm tooth width max. 58 mm diameter of tools max. 230 mm Ihjdpfx Adevxwgmewst x-axis 325 mm y-axis 350 mm z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available