Used Biomass Burner for sale (774)

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Nedpfxjz Ru Iyj Akmsdc Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Ndsdpfxjzc Hkys Akmoc

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, HOWDEN KK&K TWIN CA46 steam turbine with generator – 1.6 MW – NEW NEW | Never installed | Inspected by HOWDEN in July 2026 | OEM warranty reconfirmed | Immediate availability Available for sale: an industrial HOWDEN KK&K TWIN CA46 steam turbine, complete with a synchronous electrical generator, with a maximum electrical power of 1,595 kW (approximately 1.6 MW). The machine is NEW, never installed or commissioned, stored in a closed environment, and complete according to the original HOWDEN supply. Originally intended for an industrial project that was subsequently modified, it is now available for immediate delivery, without waiting for the production time of a new unit. HOWDEN INSPECTION AND WARRANTY On July 27–28, 2026, the turbine underwent a new inspection by the manufacturer, HOWDEN, who subsequently reconfirmed the official warranty until November 22, 2027. Original technical documentation and inspection photographs are available upon request. ECONOMIC TERMS – 40% DISCOUNT Reference value of the supply: €1,500,000 CURRENT PRICE: €900,000 The 40% reduction is motivated by the company’s need to free up the space occupied by the machine, following the modification of the original industrial plans. COMPOSITION OF THE SUPPLY HOWDEN KK&K TWIN CA46 steam turbine on a skid Integrated 3-shaft gearbox Synchronous electrical generator, supplied separately Lubrication and oil control system Control, control, and protection panels Original HOWDEN regulation and safety systems MAIN TECHNICAL DATA Turbine: Double-body HP + LP configuration Controlled steam extraction between HP and LP HP inlet pressure: 16 bar(a) HP inlet temperature: 400 °C HP steam flow rate: 10,000 kg/h LP inlet pressure: 2.4 bar(a) LP outlet pressure: 0.3 bar(a) Maximum mechanical power: 1,658 kW Maximum electrical power: 1,595 kW Gearbox outlet speed: 1,500 rpm Generator: Three-phase, brushless synchronous Rated power: 1,994 kVA Voltage: 6 kV Frequency: 50 Hz Air-cooled, IC31 Parallel operation with the grid Njde Afhgwjpfx Akmedc Included systems: Oil system with main and auxiliary pumps Electronic regulator SC901 Siemens SIPROTEC 5 protection panel Independent overspeed protection Steam pressure and extraction control PROFINET interface ENC-RfG simulation model MAIN APPLICATIONS Biomass and waste-to-energy plants Industrial cogeneration (CHP) Revamping and repowering of existing plants STATUS AND CONDITIONS OF SALE Year of manufacture: 2024 Condition: NEW, never installed or started Last HOWDEN inspection: July 2026 OEM warranty reconfirmed until 11/22/2027 Immediate availability Location: Piedmont, Northern Italy Conditions: EXW – ex works Visit and inspection of the machine by appointment PRICE: €900,000 (–40% compared to the reference value of €1,500,000) Original HOWDEN technical documentation and documentation of the latest inspection are available for interested buyers.

Condition: excellent (used), Year of construction: 2007, For sale is a functional and very well-maintained gas burner from the brand Weishaupt, model WM-G30/2-A - 2300 kW, complete with gas piping from Dungs, DN50. 1. Weishaupt Burner type: WM-G30/2-A Output: 300 - 2300 kW Design: ZM-NR Year of manufacture: 2007 2. For sale is a functional and very well-maintained gas burner from the brand Weishaupt, model G30/2-A - 2150 kW, complete with gas piping from Dungs, DN65. 2. Weishaupt Nodpfsy Uvkzjx Akmsdc Burner type: G30/2-A Output: 300 - 2150 kW Design: ZM Year of manufacture: 2001

Condition: used, Year of construction: 1979, MAN 19 280 F BREINING – Superstructure – FEDERAL Emulsion/Asphalt Spraying Unit Attention: Suitable only for emulsion, not for liquid asphalt! Control panel for the superstructure located in the driver’s cab! • Manual transmission • Differential lock • Long-distance cab • 1 sleeping berth • Leaf spring suspension • Tires: 12 R 22.5 (alternatively: 315 / 80 R 22.5) • Tank capacity: 6,000 liters of emulsion • Burner: NEW! • Spraying bar: 2 units, foldable! Errors and prior sale excepted! = Further information = Ndedpfx Aowmpcnskmjc Fuel type: Diesel Year of manufacture: March 1979 Mileage: 67,000 km Usable material: Asphalt Damage: Damaged vehicle (not roadworthy)

Condition: excellent (used), Low temperature boiler,Buderus SB615 power 510KW ,120Grad ,5,5Bar,gas or oil burner possible Nedsqww Icjpfx Akmsdc

Condition: excellent (used), Year of construction: 2011, Weishaupt gas burner, model G30/3A-5700kW, year of manufacture 2011. Available as new stock or as used equipment from companies that have ceased operations but were still in service until the end. Please arrange inspections by telephone only. We prefer to sell to dealers, businesses, or for export. All information is provided without warranty, subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. We will, of course, handle all necessary formalities. Loading and shipping are possible. Ndedpfxei Dw D Sj Akmoc

Condition: used, Year of construction: 2007, temperature max. 450 ° Ndsde Aaq Srjpfx Akmec internal length of the oven 1500 mm internal width of the oven 1500 mm internal height of the oven 2000 mm total power requirement 65 kW weight of the machine ca. 12.800 kg dimensions of the machine ca. 2,4 x 2,4 x 2,72 m

Year of construction: 2014, condition: used, The burner was in operation in a steam boiler from 2014 to 2023. In 2023, the burner was replaced with a dual-fuel burner. The unit was operated under load five days a week, and at base load on Saturdays and Sundays. Since its removal, it has been stored in its packaging in a dry, temperature-controlled hall. Nsdszwfyhopfx Akmsdc Manufacturer / Type: Garioni Naval NG 2000 Boiler medium: Steam Boiler output: 736.0 kW Burner output: 800.0 kW Firebox resistance (mbar): 8.0 mbar Firebox diameter (mm): 734 mm Firebox length (mm): 3,400 mm Type of gas: Natural gas N Heating value Hi: 10.35 kWh/m3 Relative density d (air = 1): 0.600 Gas flow rate: 77.3 m3/h Flow pressure at shut-off valve (mbar): 40 mbar Installation height above sea level (m): max. 450 m

Condition: used, Year of construction: 2009, heating capacity: 400 kW (543.85 HP), We offer a biomass boiler from the renowned company Kohlbach. Biomass boiler 400 kW TYPE K 8 – 400 Biomass boiler for bark, wood chips, and sawdust. Complete pump and valve set. Multicyclone Fuel feed Heat exchanger from 2009 Optional and available at extra cost: Biomass boiler with movable floor and hydraulic pump Ndedpfx Aox Daw Uokmsc

Condition: like new (used), Year of construction: 2017, 1. Ndedpezbz Idofx Akmec WESHAUPT gas burner, with DUNGS gas train DN65 Type: WM - G20/3-A Year of manufacture: 2017 Output: 350-2600 kW Design: ZM 2. WESHAUPT gas burner, with DUNGS gas train DN65 Type: WM - G20/3-A Year of manufacture: 2013 Output: 350-2600 kW Design: ZM

Year of construction: 2012, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 363/15862010, The rotary bed dryer WB-T (model 1.00 / 3.00) from Allgaier Process Technology GmbH is a specialized industrial plant for the continuous, uniform, and gentle drying of bulk materials and biomass. In process engineering, the model designation (1.00 / 3.00) typically refers to the dimensions of the drying area, i.e., a bed width of 1.00 meter and a bed length of 3.00 meters. The heating capacity is 250 kW and is powered by electricity. Typical applications: • Biofuels & wood industry: Drying of wood chips, sawdust, and bark for pellet production. Ndsdpjz Rz Dnjfx Akmec • Waste management • Agricultural & recycling industry: Processing of fermentation residues (from biogas plants), green waste, sugar beet pulp, or bagasse. Operating principle: The technology combines the process engineering advantages of a drum dryer with those of a fluidized bed dryer: • Rotary bed mechanism: The wet product lies inside on a perforated flow bed (perforated sheet). A targeted mechanical movement or tumbling in combination with the airflow creates a rotating or rolling product movement ("rotary bed"). • Counter-current or cross-current ventilation: The drying air is blown from below through the sieve bed and flows intensively through the tumbling product. This ensures an optimal heat and mass exchange. Main features & advantages: • Low-temperature drying: The plant is ideally designed for operation with waste heat or low-temperature heat sources (e.g., from combined heat and power plants/CHP or industrial residual energy). • Long residence time: This enables particularly gentle dewatering of the material while simultaneously ensuring high homogeneity of the residual moisture. • Robust particle processing: In contrast to pure fluidized beds, large, irregular, or sticky particles can also be processed economically. • Integrated screening: The flow effectively reduces fine dust and sand content during the process.

Condition: excellent (used), Weishaupt RGL50 / 4900 kW / Oil & Gas / Dual-fuel burner Nodpfxozal Nce Akmodc

Condition: excellent (used), Year of construction: 1988, Gas burner Weishaupt G70/2A, model: ZM Output: 1000-10900 kW Year of manufacture: 1988 Quantity: 3 Njdpfx Aohbr A Rokmedc Includes existing Dungs valves, DN100 We speak Russian! Viewings by appointment only. Preference given to sales to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. We are happy to purchase your used boiler or burner! We will, of course, handle all necessary formalities. Loading possible.

Condition: used, Year of construction: 2006, SAACKE gas burner GLS 80 year 2006 6000 KW Further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested condition: used, untested Without OVP Without original packaging Nedjtzxn Hjpfx Akmedc Example photos sample pictures A viewing in Wettringen is possible! For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: excellent (used), Viessmann Vitoplex heating boiler 150 kW (0069) oil burner Ndjdpfx Akox Htiromjc

Year of construction: 2005, condition: excellent (used), engine power 55 kW sieve diameter 6 mm Njdpfxjlx Ndle Akmedc rotor width 450 mm

Condition: good (used), Weishaupt oil burner L9T-320kg/h Nedpopiqtcofx Akmjdc

Condition: good (used), Riello oil burner 482M1,power 2370Kw,220kg/h Ndsdepir Ryepfx Akmoc

Year of construction: 2011, condition: used, functionality: fully functional, For sale is the complete plant technology of a biomass power plant (year of construction 2011) with an electrical output of 2.4 MW and a thermal output of 7.5 MW. The plant will only be sold as a complete package. The sale of individual components or spare parts is not possible. Njdpfxezmf Nbj Akmedc The plant technology includes the essential technical equipment for energy generation and is suitable for reconstruction, relocation, or as an extension of existing plants. It is in good condition and can be inspected by appointment.

Condition: excellent (used), Weishaupt RGMS 50 dual fuel burner 5400kw. Gas +heavy oil very rare Ndedpfemnqblex Akmjc

Condition: excellent (used), Year of construction: 2006, Gas burner Weishaupt WM-G30/2-A – ZM-NR version Output: 300-2300 kW Year of manufacture: 2006 With existing Dungs DN50 fittings We also speak Russian! Ndodshl R U Uepfx Akmoc Inspection by appointment only. Preferably sold to dealers, businesses, or for export. All information is provided without guarantee and subject to errors and prior sale. The seller assumes no liability for typographical and data transmission errors. We will gladly purchase your used boiler or burner! Of course, we will also take care of all formalities. Loading possible.

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Ndsdpfxewauaxe Akmjc

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 110 used wood chip / pellet biomass boiler, supplied with screw conveyor and spring-arm fuel extraction system. Nominal heat output: 110 kW. Water capacity: 320 litres. Maximum operating pressure: 3 bar. Nodpfxs Afbqve Akmsdc Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz. Net price: EUR 10,000 including the advertised feeding and fuel extraction equipment. Exact delivery scope and configuration by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, overall weight: 250 kg, input voltage: 380 V, Weishaupt WM-L30/1 R oil burner, power 800-3100 kW, manufactured in 2016. Burner power control: power continuously adjustable. Fuel type: fuel oil. Burner power range: 800-3100 kW. WFM 100 controller with power regulator (LMV 51.100C2). 7.5 kW/380V electric motor. CE certificate + complete burner documentation (operating manual and burner wiring diagram). QRB 1 photocell. Burner is 100% complete and has been serviced. We are a company specializing in the service of Weishaupt burners for over 30 years. We guarantee the proper functioning of the burners we sell. We also have other burners and spare parts (new and used) for sale. Information available upon request. Nsdpfxjzcg D Tj Akmodc