Used Blasting Pot for sale (1,063)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Bedpfx Aherq Hmzsdolp Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: new, Year of construction: 2026, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Bljdpow Ivqmofx Ahdsp Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: excellent (used), Spot welding machine with DHZ cylinder Brand DALEX Type PMS 12-5 Rated power at 50% duty cycle: 100 kVA Secondary short-circuit current: 46 kA Secondary open-circuit voltage: 8.33 V Electrode force: 120-720 daN Weight: 715 kg With separate central control cabinet for connecting five PMS 12-5 spot welding machines Bjdpfxjwarqns Ahdolp with PLC, five power levels and one MPS 200 synchronous welding controller with eight welding programs

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 4,000 mm, inner dimension length: 6,000 mm, inner dimension height: 3,000 mm, filter area: 99 m², volume flow: 7 m³/h, Equipment: documentation/manual, lighting, Blasting house for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. Bedpfxju A A Tkj Ahdslp For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: excellent (used), Air-operated, water-cooled 3-phase direct current spot welding machine Blsdpfju A Dg Eox Ahdep make DALEX type PMS 11-4 G3 Asload: 650 mm with special cylinder with low pressure range of 20-120 daN Rated power at 50 % duty cycle 60 kVA Sec. short-circuit current: 25 kA sec. open-circuit voltage: 3.68 V with add-on switch cabinet in accordance with VDE 0100 Main switch Synchronous welding control 8036 Weight: 685 kg

Condition: refurbished (used), Power at 50%: 100kVA Short circuit-current: 41,5kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 10beta (5-times, 8-program) --- Bodpfx Ahjzwhi Ssdjlp Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Year of construction: 2019, condition: excellent (used), functionality: fully functional, DESCRIPTION: The KCK-1000-FCP-UC30 pressure chamber is a versatile device with a wide range of applications. It enables the following types of work: - Cleaning the surfaces of metal objects, - Removing: welding residues, scale, rust, oxides, surface deposits, and old paint coatings, - Deburring the edges of objects, - Achieving the desired surface roughness. Technical data: - Width: 1470 mm - Depth: 1600 mm - Height: 2140 mm - Working chamber: 950 × 880 × 880 mm - Abrasive circulation: pressure-fed - Hand openings: 2 Bljdpfxezvdfao Ahdjp - Nozzle: boron carbide, ø 6 mm - Weight: approx. 300 kg - Lighting: fluorescent - Abrasive tank: 30 l - Air consumption: according to the manufacturer's table

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DMG Deckel Maho DMC 1035 V Vertical Machining Center. The machine is in very good optical and technical condition. Inspection while powered on is possible at any time. Technical data: Year of manufacture: 2008 Control system: Heidenhain iTNC530 Travel distances: X: 1,035 mm Y: 560 mm Z: 510 mm Blodpfxozun Sne Ahdjp Clamping area: 1,200 mm x 560 mm Spindle speed: 10,000 rpm Tool changer: 20-position Tool holder: SK40 Coolant/air blast switchover Electronic handwheel Operating mode 4 Coolant tank free on truck ex works Hagen

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,600 h, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, controller manufacturer: SIEMENS, controller model: 840D sl, table width: 630 mm, table length: 500 mm, table load: 300 kg, overall weight: 7,420 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DMG DMU 50 was manufactured in 2018. It features a working table size of Ø 630 x 500 mm and a maximum table load of 300 kg. The machine is equipped with a high-speed spindle capable of 15,000 rpm and a tool magazine with 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DMU 50 vertical machining centre we have for sale. Contact us for further details. Bedpfx Ae Ad Rgwshdelp Control System: CELOS with Siemens 840D sl Operate (21.5-inch ERGOline Multi-Touch display)Machining Type: 5-axis simultaneous machiningWorking Table / NC Swivel Rotary Table: Ø 630 x 500 mmSwivel / Rotary Axes: B: -35° to +110°, C: 360°Rapid Traverse X / Y / Z: 42 m/minMain Spindle: speedMASTER 20 - 15,000 rpm (SK40 / CAT40 taper)Spindle Power: 21 kW (40% duty cycle) / 16 kW (100% duty cycle)Tool Magazine: 30 positions (SK40)Operating Hours (Control/On-Hours): 33,089 hSpindle Hours: 18,597 hInternal Coolant Supply (IKZ): 40 bar / 600 l with paper band filter and cabin rootChip Conveyor: Scraper belt typeOptional Equipment:Renishaw PP60 optical infrared workpiece probe (OMP60)Heidenhain TT160 tool measurement / length, diameter, and breakage detection3D quickSET (kinematics check and correction)ATC (Application Tuning Cycle)Electronic handwheelManual double switch filter (25 µm)Air blast through spindle center (selectable via M-function)Rinsing gun for chip flushingThe image was generated by AI.Images available on request Technical Specification Taper Size SK 40

Condition: new, Year of construction: 2026, functionality: fully functional, Blasting container, 40 ft, with 9 m blasting chamber, screw conveyor floor (very low maintenance), blasting media preparation, and filtration system. Chamber dimensions (internal): approx. length = 8850 mm, height = 2485 mm, width = 2250 mm. Option: width including widening = 3240 mm. Transport height: approx. 3000 mm. Floor height: approx. 440 mm. Options: Bodpfx Aozbztashdelp - Side container opening for 9 m and 3 m machine room - Side extension for widening the blasting chamber - Crane roof opening (not possible with side opening) - Crane track, 500 kg and much more upon request.

Condition: used, Year of construction: 1991, functionality: fully functional, For Sale – MICROPEEN Scale / Shot Blasting System MICROPEEN MPS 4-200-1S Overhead Rail Shot Blasting System / Scale Removal System with Filter Unit Description For sale is a used MICROPEEN overhead rail shot blasting system / scale removal system, including filter unit, control panel, and workpiece suspensions. This system is ideally suited for: - Scale removal - Cleaning - Rust removal - Surface treatment of steel components - Series and single part processing Workpieces are conveyed into the blasting cabin via an overhead rail system. An integrated extraction and filter unit is also part of the system. The machine comes from an industrial environment and is available immediately. Technical Data Manufacturer: MICROPEEN BENELUX B.V. Model: Sa Year of manufacture: 12/1991 Compressed air: 7 bar Voltage: 380/24 V System type: Overhead Rail Shot Blasting / Scale Removal System Equipment • Blasting cabin • Overhead rail system • Filter unit / extraction • Control panel • Pneumatic system • Workpiece carriers / hooks Condition • Used • Fully functional condition • Condition as shown in photos • Viewing by appointment possible • Immediately available Price €10,500 net negotiable Location Germany Blsdpfx Aey N Tbmehdsp Search terms Shot blasting system, scale removal system, shot blasting machine, overhead rail shot blasting, sand blasting system, surface treatment, MICROPEEN, steel cleaning, shot peening Short version for platforms MICROPEEN MPS 4-200-1S Shot Blasting System Used overhead rail shot blasting system with filter system and control panel. - Year: 1991 - Compressed air: 7 bar - 380/24 V - Complete system - Immediately available Price: €10,500 net negotiable Ideal for descale and cleaning of steel components. Condition as shown in photos.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 2,288 h, functionality: fully functional, machine/vehicle number: 936, workpiece weight (max.): 150 kg, power: 8 kW (10.88 HP), workpiece length (max.): 800 mm, workpiece width (max.): 600 mm, number of support arms: 16, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with an optional support system and can therefore accommodate one large workpiece or a maximum of 16 smaller workpieces on the supports. TECHNICAL DETAILS Turbine power: 8 kW Workpiece size (single workpiece) max.: 800 x 600 mm Workpiece weight (single workpiece) max.: approx. 100 kg Number of positions in the support system: 16 Workpiece size (on support system) max.: 200 x 200 mm Workpiece weight (on support system) total max.: 150 kg Filter data Number of filter cartridges: 2 Total filter area: 20 m² Filter area per filter cartridge: 10 m² Air velocity: 1.25 m/min Compressed air data Compressed air pressure: max. 4–5 bar Compressed air consumption: approx. 7 m³/h Compressed air connection: G 1″ Permissible negative pressure: max. 1,500 Pa Dust container: 20 l Residual dust content in the exhaust air: below 5 mg/m³ MACHINE DETAILS Blsdjzh Nf Aspfx Ahdop Control unit: Pulse/time: 24 V, 1 phase, 50 Hz Solenoid valves: Voltage: 24 V, 50 Hz Timer: Input/output voltage: 24 V, 50 Hz Operating hours: 2,288 h Fan data Air flow: 2,000 m³/h Static pressure: 1,800 Pa Total pressure: 2,000 Pa Power consumption: 2.2 kW Motor power: 1.1 kW Motor voltage: 400 V Motor frequency: 50 Hz Motor phases: 3 phases EQUIPMENT Filter cartridges with 10 m² filter area each Aluminum venturi tubes Solenoid valves, type CA 25 DD Timer CG 03.06/04 Filter group Pressure regulator Pressure gauge 1″ ball valve Dust container, 20 l Fan

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,472 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, controller model: NGC, table load: 680 kg, overall weight: 3,810 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,000 g, number of axes: 3, This 3-axis HAAS VF-2SSYT was manufactured in 2022. It features an impressive X-axis travel of 762 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 914 x 457 mm and a maximum table load of 680 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SSYT vertical machining centre we have for sale. Contact us for further details. • CNC control: Haas Next Generation Control (NGC) • 1 GB program memory, 15" LCD • USB, Ethernet, Wi‑Fi • HaasConnect remote monitoring • VNC, DPRNT support • Early power‑failure detection, program restart from any block • Run Stop Jog Continue, SafeRun collision mitigation • Electronic handwheel, memory lock • Fourth-axis readiness: • VF‑YT 4th‑axis preparation • 4AXD: 4th‑axis drive, connections, and wiring • Note: Rotary table not included • Software options: • DWO/TCPC (Dynamic Work Offsets & Tool Center Point Control) • HSM (High‑Speed Machining with look‑ahead) • Probing cycles and SO, MACRO, COORD, VPS functions • Axis travels and feeds: Blsdpfx Ahj Abap Nedjp • Spindle nose to table: 102–610 mm • Rapids X/Y/Z: 35.6 m/min • Max cutting feed: 21.2 m/min • Max thrust X/Y: 8.87 kN; Z: 13.7 kN • Worktable: • 914 × 457 mm • T‑slot table, 16 mm slots, 125 mm spacing • Spindle: • Direct drive, spindle cooling, taper air blast • Rigid tapping • Tool changer: • Side‑mounted ATC, 30 + 1 tools • Max tool Ø (all pockets): 63.5 mm • Max tool Ø (adjacent empty): 127 mm • Tool‑to‑tool: 1.8 s; chip‑to‑chip: 2.4 s • Accuracy: • Positioning ±0.005 mm; repeatability ±0.003 mm • Ballscrew thermal compensation • Coolant and probing (integrated options): • P‑COOL: Programmable coolant nozzle • TSC: Through‑spindle coolant 21 bar, 22 l/min • WIPS‑R: Wireless workpiece and tool probing system • Machine features: • Fully enclosed machining area (sliding front doors, hinged side windows) • Coolant system with pull‑out tank • Automatic central lubrication • Compressed‑air connection • Machine work light Additional equipment • AUGER: Screw‑type chip conveyor • ACF: Auxiliary coolant filtration system, 25 µm • COOLANT MAINT PACK: Coolant maintenance package • COOLANT REFILL: Automatic coolant replenishment system (requires external water supply) • Enclosure mist extraction / mist condenser (as supplied) • OIL‑SKIMMER: Coolant tank oil skimmer • CHIP STRAINER: Mesh filter and metal chip basket set • LK: Machine lifting kit with lifting accessories and brackets Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2006, 1 used abrasive blasting system Manufacturer: GLÄSNER Type: DSK 1500 W Year of manufacture: 2006 Factory number: 5162-003 Technical data Working area: 1,400 × 1,150 × 900 mm Max. operating pressure: 6 bar Drive power: 2.2 kW Process: Abrasive blasting Bodpjzyx Siofx Ahdjlp Abrasive blasting tank: included Turntable: included Lighting: included Dust extraction and filtration unit Compressed air treatment Viewing window / gloves: included CE The system was used exclusively for blasting stainless steel and is in very good condition.

Condition: used, internal diameter 25 mm external diameter 39 mm wall strength 7 mm Bledpfx Ajzg Nmwehdep length in total 33 m jet hose Unused, but shows significant signs of storage wear

Condition: like new (used), Water-cooled chiller with refrigeration compressor Type eChilly 5-5 Manufacturer: HYFRA (DALEX) Bedjzg Tqtepfx Ahdelp Cooling capacity at 20 °C water temperature: 5.5 kW Dimensions L/W/H in mm: 770 / 765 / 515 Weight: 90 kg

Condition: good (used), Pinning and testing press Bedjzzl Tpopfx Ahdolp Manufacturer: REIS Type: TUS 60 A Machine number: 791/74 Year of manufacture: 1974 Pressing force: 10 t Retraction force: 2 t Maximum stroke: 500 mm Operating pressure: 175 bar Table clamping area: 590 x 670 mm Distance between columns: 600 / 600 mm Installation height: 720 mm Plate thickness: 60 mm Connected power: 5.5 kW Dimensions: 1,400 x 1,400 x 2,800 mm Weight: 2.3 t Equipment: Plate can be drawn out and swiveled Condition: good

Condition: used, Year of construction: 2015, type of input current: three-phase, input voltage: 400 V, filter area: 286 m², suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Bljdpfx Ahoz Trrhjdsp Brand: Donaldson Torit DCE Model: DFPRO 16-R Year of manufacture: 2015 Unit in the "R" version – reinforced construction with additional grounding. Built-in explosion relief flap. Delayed dust discharge valve, EX ATEX certified. Filtration area: 286 m2 Fan power: 7.5 kW Capacity: 6000 m3/h New filter cartridges installed in the unit. Stock number: 1029

Year of construction: 2011, condition: ready for operation (used), System includes (1) Industrial Robot KUKA KR 150-2 2000 (2) Spot Welding System SPATZ (3) Camera Inspection OMRON (4) Light Barrier SICK, operational hours counter: 2602h. Blsdogqkpmspfx Ahdop

Condition: used, Biesse Akron 1300 Edgebanding Machine Pre-milling cutters Replaceable glue pot Roller glue application Pneumatic pre-trimming guillotine Pressure rollers Final trimming saw R1-R2 top-bottom milling unit Multi-profile trimming cycle Flat trimming cycle Blodpfx Ao Af U E Tohdep Polishing unit Max. component height: 60mm Max. edgeband thickness (roll): 3mm Feed rate: 12m/min Machine length: 410cm Connected power: 8.6KW Machine inspected, ready for operation.

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 610 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 610 CNC was manufactured in 2024. It features a longitudinal travel of 610 mm, transverse travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with a 20-station tool changer and a maximum table load of 300 kg. If you are looking to get high-quality milling capabilities, consider the KUNZMANN WF 610 CNC vertical machining centre we have for sale. Contact us for further details. Bodpfx Ahe Af Nzusdslp - Demonstration machine- Spindle Hours: 332 h- Program Run Hours: 310 h- Feed Rate (Rapid Traverse): X/Y/Z up to max. 30/30/15 m/min - Main Drive (Option Installed): SK 40 Motor Spindle, 1 - 12,000 rpm (Swiss made) - Spindle Power: 8.5 kW (S1-100% ED) / 11.5 kW (S6-40% ED) - Spindle Torque: 43 Nm (S1-100% ED at 1,880 rpm) / 58 Nm (S6-40% ED at 1,880 rpm) - Tool Interface: SK 40 DIN ISO 7388-1 Form AD (formerly DIN 69871 AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872) - Tool Clamping: Mechanical, clamping force 10,000 N, hydraulic release - Vertical Milling Head: Direct-driven, manually tiltable -5/+90°, extendable quill with turnstile (stroke 70 mm, clampable) - Rigid Angle Table Surface: 800 x 425 mm - Table T-Slots: 6 x 14 H7 (pitch 63 mm) - Max. Table Load: 300 kg - Tool Changer: 20-station disc magazine, SK 40 - Max. Tool Diameter: 75 mm (full magazine) / 150 mm (with adjacent empty pots) - Max. Tool Length: 250 mm - Max. Tool Weight: 8 kg - Tool Change Time: approx. 3 s (chip-to-chip approx. 15 s) - Positioning Accuracy (ISO 230-2): 0.008 mm (direct linear measuring systems) - Repeatability (ISO 230-2): 0.006 mm (direct linear measuring systems) - Measuring System: HEIDENHAIN absolute direct linear measuring system (resolution 0.001 mm) - Coolant Through Spindle (IKZ): 50 bar high-pressure pump (26 l/min), 4-stage pressure adjustment (15/25/40/50 bar), 25 µm double switch filter - Internal Air Cooling: Through-spindle air cooling, M-function programmable - External Air Cooling: Flexible articulated hose, M-function programmable - Paper Band Filter Unit: Trommel-mulden filter with 600 l external tank, type VDF150/50/50 (150 g/m²) filter fleece (dimensions: 1800 x 860 x 1620 mm) - Chip Conveyor: Hinge-belt conveyor integrated into 115 l coolant tank, 60° incline, lateral discharge left (height 870 / 1060 / 1200 mm) - Workpiece Probe: HEIDENHAIN TS 460 3D probe (infrared) with SE 661 transceiver - Additional Axes Preparation: 4th axis preparation (axis controller in electrical cabinet, pre-wired interface) - Automation Interface: Preparation kit for EDUCATION4.0 Cobot cell (Harting connector I/O interface, pneumatic connection, plus 2x pneumatic table connections max. 6 bar) - Enclosure Door: Automatic sliding front door driven by belt drive (manual push button & programmable) - Software Option: OCM (Optimized Contour Milling) for advanced trochoidal milling - Handwheel: HEIDENHAIN HR 510 FS electronic handwheel with axis selection and emergency stop - Operating Voltage: 400 V, 50 Hz - Power Consumption: approx. 21 kVA - Control Voltage: 24 V - Compressed Air Supply: 6.5 - 10 bar (min. 6.5 bar required at machine) - Machine Weight: approx. 2,900 kg (with tool changer)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 3,343 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, total height: 3,282 mm, total width: 4,039 mm, table width: 914 mm, table length: 1,626 mm, table load: 1,814 kg, overall weight: 11,250 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 40, tool weight: 5,400 g, product length (max.): 4,827 mm, number of axes: 3, This 3-axis Haas VF-8 vertical machining centre was manufactured in 2015. It features an impressive X-axis travel of 1626 mm, Y-axis travel of 1016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 1626 x 914 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the Haas VF-8 vertical machining centre we have for sale. Contact us for further details. • CNC control • Haas CNC control, Classic generation • 15-inch colour LCD • USB port • Program memory: 1 MB • Remote jog handle with colour display • Axis travels and feed rates • Spindle nose to table distance: 102–864 mm • Rapid traverse (X/Y/Z): 15.2 m/min • Maximum cutting feed rate: 12.7 m/min • Worktable • Table dimensions: 1626 × 914 mm • Max evenly distributed table load: 1814 kgSpindle • Spindle taper: 40 taper Blsdj Adz Ilspfx Ahdsp • Maximum spindle speed: 8,100 rpm • Spindle power: 15 kW • Two-speed gearbox • Spindle cooling system • Spindle taper air blast • Rigid tapping • Tool changer • Side-mounted tool changer: 40 positions • Coolant and chip removal • Through-spindle coolant: 20 bar, 22 L/min • ACF additional coolant filtration system: 25 µm • Programmable coolant nozzle position • Coolant system with pull-out coolant tank • Screw-type chip auger • Probing and machining options • WIPS-R wireless workpiece and tool probing system • Tool length and radius measurement • Workpiece measurement and setting cycles • PMDS probe interface, internal power supply and wiring • Spindle orientation, coordinate rotation and macros • VQC Visual Quick Code conversational programming • HSM High-Speed Machining with look-ahead for machining complex contours using three-axis interpolation • 4AXD fourth-axis preparation, including connections and wiring. Rotary table not included • APC-READY automatic pallet changer preparation, including eight additional functions, macro support and wiring. Pallet changer not specified as included Additional equipment • Ball screw thermal compensation • Fully enclosed machining area with sliding front doors and hinged side windows • Program memory lock • Compressed-air connection • EPFDM early power failure detection module • Automatic central lubrication • Machine lighting • CABCOOL CNC control cabinet cooling unit Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Special Feature: Machine with a gluing height of up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Features and Technical Specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cutable edges) - Three pressure rollers - Belt feed: - 0.25 kW - Approx. 1,250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with a thick, workpiece-protective rubber covering - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue tank with glue supply from below and fast heat-up time after machine shutdown - Flush trimming unit: - for the front and rear edges of the workpiece - Automatic sensing of the workpiece - Pneumatic trimming with a blade for cut-ready edges - Flush milling unit - With vertical sensing and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Milling cutter: 70 mm, Z4, radius 2 mm/15° - Central exhaust port: 100 mm - 2 chip extraction hoods with 60 mm hose - Automatic height adjustment of the upper router bit via the belt feed - Continuous workpiece support, approx. 1,800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable film plate: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10–100 mm - Workpiece length: min. approx. 220 mm Blsdpszk Nmrofx Ahdep - Edge thickness: 0.4–2.0 mm - Roller cutting: max. 1.0 × 55 mm, 2 × 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase N - Total power consumption: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg

Condition: ready for operation (used), Year of construction: 2024, operating hours: 54 h, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i-Series, total height: 3,170 mm, total width: 3,850 mm, table width: 1,630 mm, table length: 760 mm, table load: 1,500 kg, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,480 mm, number of axes: 3, This 3-axis DOOSAN DNM 750 II was manufactured in 2023. It features a generous X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine has a maximum table load capacity of 1,500 kg and a spindle speed range of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 750 II vertical machining centre we have for sale. Contact us for further details. - Manufacturer: DN SOLUTIONS- Model: DNM 750 II- Year of Manufacture / Build Date: 12/2023- CNC Control: FANUC i-Series (Fanuc F0i Touch with Manual Guide / EZ Guide and Fanuc HMI)- Screen Size: 15" Touch Screen- Operating Hours:* Control On (STRG EIN): 299 h 5 min* Operating Time / Run Time: 53 h 54 min 14 s* Machining Time: 40 h 15 min 28 s* Cycle Time: 0 h 0 m 0 s- Travel X-Axis: 1,630 mm- Travel Y-Axis: 762 mm- Travel Z-Axis: 650 mm- Table Size: 1,630 x 760 mm- Table Surface: T-slots (5 - 125 x 18H8)- Max. Workpiece Dimensions / Height: 725 mm- Max. Table Load Capacity: 1,500 kg- Distance Spindle Nose to Table Surface: 150 - 800 mm- Rapid Traverse (X / Y / Z): 30 / 30 / 24 m/min- Max. Cutting Feedrate: 12,000 mm/min- Acceleration / Deceleration Time (X / Y / Z): 150 / 160 / 150 ms- Axis Drive Motor Power (X / Y / Z): 4 / 4 / 4 kW- Ball Screw Diameter x Lead (X / Y / Z): 45 x 12 mm / 45 x 12 mm / 45 x 10 mm- Positioning Accuracy (X / Y / Z): 0.014 mm / 0.008 mm / 0.008 mm- Repeatability (X / Y / Z): 0.007 mm / 0.005 mm / 0.005 mm- Spindle Speed Range: Up to 12,000 rpm- Spindle Drive Type: Direct Connection (Type 2)- Spindle Motor Power (Continuous / S3 25%): 11 kW / 28 kW- Spindle Base Speed: 1,500 rpm- Max. Spindle Torque: 159.3 Nm (S3 15%)- Spindle Clamping Force: 7.35 kN- Tool Holder Taper: SK40 (converted to SK40 per order confirmation DIN 69871 / ISO 7388-3; convertible to BT40 / BBT40)- Spindle Cooling Tank Capacity: 40 L (Cooling capacity 1.56 kW at 50 Hz / 1.76 kW at 60 Hz)- Tool Storage Capacity: 30 tool stations- Tool Selection Type: Memory Random- Max. Tool Diameter (Continuous): 80 mm- Max. Tool Diameter (Adjacent Pots Empty): 125 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Tool Moment: 5.88 Nm- Tool-to-Tool Time: 1.6 s (50 Hz) / 1.3 s (60 Hz)- Chip-to-Chip Time: 4.0 s (50 Hz) / 3.7 s (60 Hz)- Through-Spindle Coolant (TSC / IKZ): Middle pressure, 4.0 kW pump, 20 bar, 25 µm cyclone filter- External Flood Coolant: 1.8 kW pump, 7 bar, 30 L/min- Coolant Flush Pump (Inside Flushing): 1.1 kW, max. 0.75 MPa (50 Hz), 20 L/min- Coolant Tank Capacity: 520 L- Coolant Gun: Included (with separate pump 0.6 kW)- Air Gun: Included- Spindle Compressed Air Blow: Compressed air outlet above spindle for chuck/fixture cleaning- Oil Skimmer: Belt type- Mist Collector / Oil Mist Extraction: Dormatec AF-30P (0.75 kW, 29 m³/min capacity, 200 mm inlet, H13 filter, 99. Blsdpfo Ahpqmjx Ahdep

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, repeat accuracy: 0.2 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool Blodpfx Asfnlkwehdep • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.