Used Blow Molding Machine for sale (66,216)

Condition: excellent (used), Year of construction: 2010, Engel DUO 5550/1100 Injection Moulding Machine Year of manufacture: 2010 Clamping force: 11,000 kN Mounting platen dimensions (HxV): 1850 × 1810 mm Distance between tie bars (HxV): 1400 × 1150 mm Gksdpfx Ajw Tc Hxokasb Mould height (min–max): 600 – 1200 mm Maximum opening stroke: 1800 mm Screw diameter: Ø 90 mm Injection volume: 2740 cm³ Injection weight (PS): 2520 g Injection pressure: 2180 bar Power supply: 3 × 400 V, 50 Hz Control system: ENGEL CC 200 A02 (15″ touch screen), 2 languages (PL/EN) Robot: ENGEL ERC 63/1F, RC 200 — range X: 700 mm, Y: 1000 mm, Z: 1880 mm, payload 30 kg

Condition: excellent (used), Year of construction: 2006, ENGEL DUO 7050/1100 Advanced Injection Moulding Machine Year of manufacture: 2006 Control system: ENGEL EC100 / CC100 (microprocessor-based) Key Technical Specifications Clamping force: 11,000 kN Platen dimensions: 1,850 × 1,810 mm (width × height) Tie bar spacing: 1,400 × 1,150 mm (horizontal × vertical) Mould height: 400 – 1,200 mm Variant A: Reduced minimum mould height to 400 mm (–200 mm) Maximum opening stroke: 1,800 mm Gjdpfow U Tcmox Akaekb Screw diameter: Ø105 mm L/D ratio: 22 (M3 barrel), optionally L/D = 24 (extended M3 barrel) Injection volume (max): 4,160 cm³ Injection weight (PS, max): 3,830 g Injection pressure (max): 2,090 bar Plasticising rate: 112 g/s (for PE-HD, L/D = 22) Injection nozzle: Herzog, needle type, pneumatically actuated shut-off, HP1.1 type, Ø12 mm orifice, M30×2 thread, adapter for ENGEL; no standard nozzle supplied Injection Unit Two injection cylinders with compact design M3 plasticising barrel, bimetallic, corrosion and wear resistant, operating temperature up to 350°C S4V screw Ø105 mm, heat-treated, nitrided, chrome plated, with hardfacing; R9 non-return valve 2D mixing head Ø105 mm TMR mixer Ø105 mm Material hopper with a capacity of 300 l and magnetic grid Clamping Unit Hydromechanical, two-platen system Four high-pressure short-stroke cylinders on nozzle side Four locking nuts on the ejector side Two rapid traverse cylinders (diagonal assembly) Special platen design – horizontal and vertical knockout holes Mould cooling: 10-fold rotameters (0-30 l/min), total of 20 circuits (10 per platen) Variant A: Reduced minimum mould height to 400 mm, maximum daylight maintained (2,400 mm), and increased opening stroke

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Gjdpfx Aey Iwlaskaskb Inspection under power possible at any time! Technical specifications as per the pictures! Machine is immediately available!

Condition: used, Speed: 8.000 bph with 0,5 liter bottle. Different formats are possible optionaly. Gedpfx Akez Abldeaskb Dismanteling is made by Seegräber GmbH on begining februar 2018. List of machines included: -SIDEL SBO 6 Blowing machine. Completly overhault by SIDEL in 2006. -Preform magazin and preform elevator Compressor, cooling, moulds not included

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 53 mm, clearance between the columns: 530 mm, displacement volume: 518 cm³, injection pressure: 1,830 bar, injection weight: 477 g, mold height (min.): 180 mm, ejector force: 62 N, ejector stroke: 150 mm, plate width: 700 mm, plate height: 700 mm, total length: 5,800 mm, total width: 1,450 mm, total height: 1,800 mm, overall weight: 5,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 201 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN160A6-IU945 D=53 Gsdpfx Akjzz Sw Ioaokb Servo-hydraulic with electric screw drive Clamping force 160T Tie bar spacing 530x530 Tool installation height 180 to 650 Robot interfaces Euromap 67, Euromap 18 Suitable 12kg linear robot available upon request. Basic standard equipment, see brochure. Optional equipment: 3 × 400 V + N + PE / 50 Hz Germany – CE standard KEBA 2985 control system Standard screw and cylinder unit PID control of the nozzle Thermal insulation cover for the cylinder Closed cooling circuit for the cylinder’s feed zone 1 air blow-off unit on the fixed mold plate EU67 robot interface Centering ring on the fixed mold plate EU2 ejector bore 1 additional 32-A socket Plasticizing interface Cooling circuit of the heat exchanger controlled via solenoid valve Tool thickness increased by 100 mm Moving mold plate with 2 hydraulic core pulls, each with pressure relief Fixed mold plate with 2 hydraulic core pulls, each with pressure relief EUROMAP-13 core pull interface on the fixed mold plate EUROMAP-13 core pull interface on the moving mold plate Oil preheating Additionally 6 DI/DO signals as reserve (KEBA) Free programming (KEBA)

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, clearance between the columns: 720 mm, displacement volume: 834 cm³, injection pressure: 2,310 bar, injection weight: 767 g, mold height (min.): 250 mm, ejector force: 55 N, ejector stroke: 150 mm, plate width: 970 mm, plate height: 970 mm, total length: 7,150 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 12,900 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF300 IU1930 D=60 Fully electric injection molding machine. Ejector, nozzle system, and core pulls are servo-hydraulically controlled. Clamping force: 300T Tie bar spacing: 720x720 Tool installation height: 250 to 650 Robot interfaces: Euromap 67, Euromap 18 Warranty can optionally be extended to 24 or 36 months. Gkedpfezz Stpsx Akaeb Suitable linear robot available upon request. Standard equipment: see brochure. Optional equipment: CE standard Hybrid machine KEBA 8000 control system PID control of the nozzle.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 92 mm, clearance between the columns: 830 mm, displacement volume: 2,458 cm³, injection pressure: 1,360 bar, injection weight: 2,262 g, mold height (min.): 260 mm, ejector force: 110 N, ejector stroke: 220 mm, plate width: 1,165 mm, plate height: 1,145 mm, total length: 8,750 mm, total width: 2,200 mm, total height: 2,200 mm, overall weight: 20,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 248 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN420A5-3330 D=92 Gksdpfx Ajzz Srrekasb Clamping force: 420T Tie bar spacing: 830x810 Mold height: 180 to 550 Robot interfaces: Euromap 67, Euromap 18 Suitable robot available upon request. Basic standard equipment: CS standard KEBA 1175 control system UK version Standard screw and cylinder unit Environmentally friendly insulating cover

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 530 mm, displacement volume: 159 cm³, injection pressure: 2,000 bar, injection weight: 146 g, mold height (min.): 175 mm, ejector force: 40 N, ejector stroke: 125 mm, plate width: 775 mm, plate height: 775 mm, total length: 5,450 mm, total width: 1,550 mm, total height: 1,950 mm, overall weight: 5,850 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF160 IU320 D=35 Gkedezz Sp Rjpfx Akajb Fully electric SGM – ejector, nozzle system, core pulls are servo-hydraulic Clamping force 160T Tie bar spacing 530x530 Tool installation height 175 to 620 Robot interfaces Euromap 18 and Euromap 67 Warranty can optionally be extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Basic standard equipment, see brochure. Optional equipment: CE standard Hybrid machine Maximum tool height increased by 100 mm Bimetal screw and cylinder unit, version B Interface for conveyor belt Quick-change version of the plasticizing unit with Harting interface 2 additional hydraulic core pulls with end switch monitoring 2 air blow-off units, permanently mounted on the fixed platen Dosing signal interface with HAN-3A connector, plus 1 additional 220 V / 10 A Schuko socket 20 mA interface for mold temperature controller 1 set of 4 × 2 water manifolds on the back of each platen with 3/8" connection 2 sets of water manifolds, each with 4 lines Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable inputs/outputs Centering rings on both platens according to Euromap 18/67

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 48 mm, clearance between the columns: 460 mm, displacement volume: 371 cm³, injection pressure: 1,630 bar, injection weight: 341 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,250 mm, total height: 1,800 mm, overall weight: 5,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN160A5-IU604 D=48 Gkodpfxszz Spdo Akasb Clamping force: 160T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Basic standard equipment Suitable 12 kg linear robot available upon request. Optional equipment: CE standard Quick-change version of the plasticizing unit with Harting interface 1 set of core pull Dosing signal interface with HAN-3A connector KEBA 1000 1 set with 6 glass flow meters EU67

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, clamping force: 500 kN, total length: 3,395 mm, total width: 1,000 mm, total height: 2,000 mm, overall weight: 2,510 kg, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine, fitted with the Procan Controller. Gedpfx Akjzx Ukfjaskb Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 50M which is very similar to the BOY 50M machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 43 mm, clearance between the columns: 460 mm, displacement volume: 452 cm³, injection pressure: 1,340 bar, injection weight: 416 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,400 mm, total height: 1,850 mm, overall weight: 4,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN120A5-IU604 D=43 Clamping force: 120T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Suitable 6kg or 12kg linear robot available upon request. Basic standard equipment: see brochure. Optional equipment: Water connections: 6 for fixed platens, 6 for movable platens 3 core pulls: 2 on movable platen and 1 on fixed platen 1x Harting connector for the core pull Ejector safety interface 6x cascade 1x valve connector 2x 16A sockets 1x 25A socket Gjdpfxjzz Smco Akaskb

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 180398, clamping force: 1,200 kN, screw diameter: 35 mm, injection weight: 186 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision Engel Victory VC 500/120 injection moulding machine. This tie bar-less machine is fitted with the Engel Microprocessor controller and 35mm diameter screw, which gives a shot weight of 186 (PS)g. Gedpfszx Uc Iox Akajkb Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 60 mm, clearance between the columns: 730 mm, displacement volume: 664 cm³, injection pressure: 151 bar, injection weight: 611 g, ejector force: 99 N, ejector stroke: 200 mm, plate width: 1,060 mm, plate height: 1,060 mm, total length: 8,100 mm, total width: 2,100 mm, total height: 2,100 mm, overall weight: 17,300 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 180 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: P350H IU1610 D=60 High-performance packaging machine for thin-walled packaging Clamping force: 350 tons Tie bar spacing: 730 x 730 Tool installation height: 350 to 750 Warranty can be optionally extended to 24 or 36 months. Standard options: see brochure Special options: Gkjdpfx Akezz Sikjasb Germany – CE standard 3 × 400 V + N + PE / 50 Hz Screw diameter: 60 mm, L/D ratio 24:1 Ejector stroke increased to 220 mm Ejector, as well as tool opening and closing, with high-performance proportional valve 1 set of hydraulically synchronized core pull head plate with high-speed proportional valve Linear guides for the clamping unit Servo injection up to 1,000 mm/s Electric plasticizing motor Ceramic heater OPC-UA interface KEBA 2985 control system 2 additional sockets: 1 × 16 A 1 × 32 A Water distributor with 10 inlet and 10 outlet connections for movable and fixed clamping plates Energy meter Electric dosing

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 60 mm, clearance between the columns: 610 mm, displacement volume: 749 cm³, injection pressure: 1,690 bar, injection weight: 689 g, mold height (min.): 195 mm, ejector force: 77 N, ejector stroke: 160 mm, plate width: 865 mm, plate height: 825 mm, total length: 6,500 mm, total width: 1,800 mm, total height: 2,050 mm, overall weight: 7,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 157 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN220A5-IU1269 D=60 Servo-hydraulic Clamping force 220T Tie bar spacing 610x570 Tool mounting height 195 to 610 Robot interfaces Euromap 67, Euromap 18 Suitable 12kg linear robot available upon request Standard options, see brochure Optional features: CE standard 400 V / 3 phases / 50 Hz Oil preheating Ceramic heating PID control of the nozzle Maximum tool height increased by 100 mm Bimetallic screw and cylinder unit, version B Interface for conveyor belt Quick-change version of the plasticizing unit with Harting interface 3 hydraulic core pulls on the moving platen 2 air blow units, permanently mounted on the fixed platen Metering signal interface with HAN-3A connector Additional 220 V / 10 A Schuko socket 20-mA interface for mold temperature controller KEBA 2985 EU67 1 set of hydraulic sequence valve for needle closing Quick-change version of the plasticizing unit with Harting interface Gksdpfx Aozz Rkaskaob Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 6 freely programmable input/output signals Centering rings on both platens

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 40 mm, clearance between the columns: 310 mm, displacement volume: 207 cm³, injection pressure: 142 bar, injection weight: 191 g, mold height (min.): 120 mm, ejector force: 22 N, ejector stroke: 60 mm, plate width: 470 mm, plate height: 470 mm, total length: 4,437 mm, total width: 1,418 mm, total height: 1,560 mm, overall weight: 2,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 95 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN60A5-IU295 D=40 Clamping force: 60T Gsdezzz N Tspfx Akajkb Tie bar spacing: 310x310 Tool installation height: 120 to 330 Robot interfaces: Euromap 18 and Euromap 67 Basic standard equipment A suitable 6 kg linear robot is available upon request.

Condition: used, Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, clamping force: 2,450 kN, screw diameter: 50 mm, clearance between the columns: 610 mm, total length: 6,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 12,000 kg, power: 48 kW (65.26 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 68 A, We offer this used WOOJIN PLAIMM TE250 injection molding machine, manufactured in 2020. Serial number: 2002501597 Model: TE250 Clamping force: 2450 kN Screw diameter: 50 mm Injection unit: IE780 Electrical power: 48 kW Motor rated current: 50 A Rated current at full load: 68 A Control voltage: 400 V Frequency: 50 Hz Dimensions (L×W×H): 6.7 × 1.7 × 2.0 m Weight: 12 t Date of manufacture: 2020.12.21 If you have any questions or require additional information, please send us a message or contact us by phone. Gsdpfx Ajzwupxokaekb

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY VC 650/150 Tech injection molding machine ENGEL ERC 13/1-F robot – SET 1 Year of manufacture: 2005 Clamping unit design: ENGEL tie-bar-less Clamping force: 1,500 kN / 150 t Control system: ENGEL CC200 – color touchscreen Injection unit: 650 Screw diameter: Ø45 mm Screw stroke: 200 mm Screw L/D ratio: 20 Injection volume: 318 cm³ Injection shot weight: approx. 290 g PS Maximum injection pressure: 2,040 bar Maximum screw speed: approx. 315 rpm Maximum injection flow rate: approx. 179 cm³/s Mold opening stroke: approx. 500 mm* Maximum distance between platens: approx. 700 mm* Nozzle stroke: 350 mm Nozzle clamping force: 67 kN Cylinder heating power: approx. 13.3 kW Number of heating zones including nozzle: 5 Godpjzxqycjfx Akajkb Hopper capacity: approx. 80 l Machine weight: 9,500 kg Robot: ENGEL ERC 13/1-F Robot manufacturer: ENGEL Robot year of manufacture: 2005

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, clearance between the columns: 480 mm, displacement volume: 247 cm³, injection pressure: 272 bar, injection weight: 107 g, mold height (min.): 150 mm, ejector force: 40 N, ejector stroke: 100 mm, plate width: 705 mm, plate height: 705 mm, total length: 5,037 mm, total width: 1,590 mm, total height: 1,850 mm, overall weight: 5,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF120 IU320 D=30 Fully electric IMM. Ejector, nozzle system, core pulls servo-hydraulically controlled. Clamping force 120T Tie bar spacing 480x480 Tool installation height 150 to 580 Robot interfaces Euromap 18 and Euromap 67 Warranty can be optionally extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Optional equipment: CE Maximum tool height increased to 580 mm Bimetallic plasticizing up to GF 30% Interface for conveyor belt Electric quick-change system for the cylinder with Harting interface 2 additional hydraulic core pulls with limit switches 2 air blow devices, permanently mounted on the stationary platen Dosing signal interface with HAN-3A connector Additional power supply: 220 V, 10 A, Schuko socket 20-mA interface for mold temperature controller One water distributor 4 × 2 on the rear of each platen with 3/8" connections 2 water distributor batteries with 4 lines each Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable input/output signals Centering rings on both platens according to Euromap 18 / 67 Standard equipment: Clamping unit · Clamping unit with automatic central lubrication · Clamping movements via proportional valve control · Hydraulically operated ejector plate · Tool protection · Variable adjustment of the clamping force possible · Ejector protection · Mechanical robot interface Euromap 18 · Footboard protection under the clamping unit from D1 1100 and larger · Precision leveling shims between machine frame and customer floor · Platens with threaded holes and T-slots, see technical data · Automatic central lubrication (with grease) · Ejector plate Gkodpfx Aozzn Hlskajb Injection unit · Hydraulic dual-cylinder injection · Thermally insulated plasticizing unit · 10-stage adjustment of the injection speed · (Control parameters: speed; pressure; position) · 10-stage adjustment of the holding force (Control parameters: speed; pressure; position) · 5-stage adjustment of the plasticizing speed · (Control parameters: speed; pressure; position) · Plasticization supported on linear guides · Hydraulic nozzle system · Cold start protection · Screw retraction function · Automatic shut-off · Measuring system for screw position Electrical system · Plasticizing heater via PID control · Manual, semi-automatic and fully automatic operation possible · Maintenance interface · Automatic alarm system with horn · Unlimited technical parameter memory · Automatic tool height adjustment · Emergency stop function · Online cycle analysis · 12" TFT touch operating panel · Visualized graphic program · PDP interface · Injection monitoring · Tool closing monitoring · SPC interface · IP54 standard · Screw speed measurement · 16-level password security · Euromap 12 · Automatic overheating protection Hydraulic system · Quiet servomotor hydraulic system · Energy-saving servomotor hydraulic system · High-performance servopump system · Back pressure control via proportional valves · Oil preheating · Injection and tool closing monitoring · Automatic pressure and flow calibration · Oil temperature and oil level alarm

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, clamping force: 500 kN, clearance between the columns: 305 mm, mold height (min.): 250 mm, plate length: 500 mm, plate height: 500 mm, total length: 3,450 mm, total width: 1,050 mm, total height: 2,000 mm, overall weight: 2,050 kg, Equipment: documentation/manual, Clamping force: 500 kN (50 tons) Column spacing (H x V): 305 x 305 mm Dimensions of the mounting plates: 500 x 500 mm Maximum mold opening stroke: 350 mm Minimum mold height: 250 mm Maximum distance between the plates: 600 mm Maximum screw stroke: 120 mm Injection pressure: up to approx. 1900 bar (depending on the screw diameter) Godpfx Aszx Agnskajkb Stroke of the hydraulic ejector: 80 mm Machine weight: approx. 2050 kg Overall dimensions: approx. 3450 x 1050 x 2000 mm Defective control system!!!

Condition: used, Year of construction: 1998, operating hours: 93,000 h, functionality: fully functional, machine/vehicle number: 174380, clamping force: 2,000 kN, screw diameter: 60 mm, clearance between the columns: 560 mm, mold height (min.): 1,050 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 222 A, Equipment: documentation/manual, For sale: 200-ton Krauss Maffei injection molding machine. The machine is currently in production and can be inspected while in operation. Distance between columns (H x V): 560 x 560 mm Platen size: 915 x 915 mm Gkodpfxszwwyaj Akaeb Max. open height: 1050 mm Min. mold height: 350 mm Opening stroke: 700 mm

Condition: excellent (used), Year of construction: 2009, clamping force: 3,000 kN, screw diameter: 65 mm, clearance between the columns: 710 mm, injection pressure: 2,070 bar, injection weight: 981 g, mold height (min.): 225 mm, Clamping Unit • Clamping force: 3000 kN (300 t) • Distance between columns: 710 x 710 mm – special design, increased distance compared to the standard version • Mold height: min. 225 mm / max. 1125 mm • Opening stroke: 900 mm • Maximum distance between mounting plates: 1125 mm • Mounting plate size: 1030 x 1020 mm (920 mm) • Special hole pattern in the clamping plate and nozzle plate – made to order • Manual device for removing the upper column, with a removable cover in the front guard and a wrench for the column nut Gjdpjzxfg Rjfx Akajkb Injection Unit • Injection unit 2250 • Screw diameter: 65 mm, L/D ratio 22.0 • Shot volume: 1078 cm3 • Maximum injection weight (PS): 981 g • Specific injection pressure: 2070 bar • Equipment package: wear and corrosion-resistant plasticizing unit, adapted for processing PP and PPSU, diameter 65 mm • Hart-PVC package: without internal screw cooling, with external cylinder cooling instead of standard design • High-temperature heating bands for a working temperature of 450 °C • 8 standard open nozzles, plus: 4 for the PVC cylinder and 4 for the PP cylinder, through holes 4, 8, 10, and 12 mm • Wrench for screw tip for a 65 mm diameter UNILOG B6S Control System - Upgrade package • Controller with increased computing power • APS and cycle time analysis • Four freely configurable network connections • Userpage and notepad • Real-value graphics with 16 curves • Event log depth: 10,000 events • Quality table memory depth: 10,000 events • Four envelope curves, foil function keys • SPC evaluation and trend charts • Injection, holding, and back pressure controlled by a servo valve Hydraulics and Hydraulic Cores • Core movement and parallel ejection are performed by an additional DFEE pump, size 71, flow rate 95 l/min • 4 x hydraulic core for the clamping plate NW 10 (on/off valve), interfaces according to EUROMAP 13, with active ejector plate protection • Cores mounted on the upper side of the clamping plates, each with connections for two consumers • 2 x core junction box in a special design: 25 3-pole Amphenol plugs, mounted on the clamping plate on the operator side and the rear side, connected in series • 4 x core pressure relief upon emergency shutdown, engine stop, and after pressing the button in setting mode – relief occurs simultaneously for cores on the clamping side and the nozzle side • 4 x twin check valve for NW 10 core • 2 x pneumatic valve for controlling one closing nozzle in the mold or several in parallel (1000 l/min), mounted in the center console at the rear of the machine Mold Heating, Electrical System, and Connections • 12 x temperature control circuit for hot runner or mold heating, power 2.3 kW, 10 A, interface according to HASCO standard (1 x HASCO 24-pole for max. 6 zones) • Mounting location for heating circuits: center console at the rear, near the control cabinet • 2 x Schuko 16 A socket: under the control system and on the clamping side from the rear, under a cover • 2 x CEE 16 A socket: on the injection side from the front and on the clamping side • Dual power supply: 1. power supply 3P+N, 400 V, rated current 140 A, preliminary protection gL-gG 160 A • 2. power supply 3P, 400 V, rated current 98 A, preliminary protection gL-gG 100 A

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Gkjdpfxevxh Iuo Akaeb Immediately available from stock

Condition: excellent (used), Year of construction: 2008, Min. tool mounting height: 200 mm Gsdezkfd Topfx Akaokb Max. tool mounting height: 350 mm Max. opening stroke: 380 mm Screw diameter: 22 mm Clamping force: 800 kN Tie bar spacing: 470 x 420 mm Delivery does not include attachments/accessories. The machine is in very good condition and is powered on.

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Weight: 3,200 kg Godpfx Asvygh Nekajkb Available immediately from stock

Condition: excellent (used), Year of construction: 1998, Min. tool mounting height: 200 mm Max. plate distance: 550 mm Column spacing: 270 x 270 mm Screw diameter: 15 mm Clamping force: 400 kN Includes temperature control unit Includes handling robot The machine is in very good condition and is operational. Gjdpfx Aozkfh Sekaokb