Used Board Turning for sale (11,199)

Condition: not inspected (used), Year of construction: 2007, operating hours: 43,558 h, functionality: unexamined, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle speed (max.): 5,000 rpm, spindle bore: 118 mm, controller model: SIEMENS SINUMERIK 840 D POWERLINE, distance between spindles: 900 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item within the specified time frames: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 3,200 rpm Swing diameter: 270 mm Turning diameter: 120 mm Maximum bar diameter: 100/104 mm Spindle bore diameter: 118 mm Distance between spindles: 900 mm Travel X1-axis: 290 mm Travel Z1-axis: 650 mm Travel X2-axis: 180 mm Travel Z2-axis: 650 mm Travel Y1-axis: ±40 mm Travel Z3-axis: 670 mm Travel X3-axis: 175 mm Rapid traverse X/Z-axis: 30 m/min Rapid traverse Y-axis: 15 m/min Number of tool turrets: 2 Number of tools per turret: 12 All tool positions are driven MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D POWERLINE Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm Machine weight: 11,000 kg Ffedsym A S Ijpfx Adasw Operating hours: 88,040 h Spindle hours: 43,558 h EQUIPMENT Chip conveyor Foot switch Note: The machine has the following defects: - The B-axis is defective (located on turret 1) - The guideways and drives are worn in line with the machine’s age - The X2-axis (guide rails) runs slightly out of alignment in the range of 0.03 mm (re-measurement required) - Setting the reference values for the axes in the control system is not functioning - The hydraulic pump was replaced by a spare pump after failure and is now set up externally as a separate unit External reference: Bilstein - Lot 2

Condition: not inspected (used), Year of construction: 2008, operating hours: 39,361 h, functionality: unexamined, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, controller model: SIEMENS SINUMERIK 840 D, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item within the specified timeframe, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter: 640 mm Maximum turning diameter: 640 mm Fodpfx Adsym A D Rsaofw Maximum turning diameter (sub spindle): 400 mm Spindle distance: 1,500 mm Turning length: 1,185 mm Max. workpiece weight: 150 kg Slide travel X1: 550 mm Slide travel Y1: 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm Max. milling spindle speed: 12,000 rpm Max. main spindle speed: 4,000 rpm Max. sub spindle speed: 3,200 rpm Rapid traverse rate, Slide 1 (X/Y/Z): 40 / 24 / 70 m/min Rapid traverse rate, Slide 2 (X/Z): 24 / 36 m/min Rapid traverse rate, Slide 3 (Z): 36 m/min Tool holder: HSK 63 Number of tool positions in chain magazine: 40 MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 7,800 x 4,100 x 3,040 mm Machine weight: 16,500 kg Operating hours: 72,899 h Spindle hours: 39,361 h Bar feeder Model: COCCHE GIOVANNI CNC-DB 110 Year of manufacture: 2008 Serial number: CNCDB-08.306 Weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty and requires repair. - The Q2 axis (milling spindle tool changer) fails more frequently. - The X2 axis (guideways) moves slightly askew. - The guideways and drives show age-appropriate wear. External Reference: Bilstein – Lot 1

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, spindle speed (max.): 5,000 rpm, travel distance X-axis: 180 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 704 mm, controller model: FANUC SERIES 31 i-MODEL A, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS TRAVEL DISTANCES X1-axis: 180 mm X2-axis: 180 mm Y1-axis: ±45 mm Z1-axis: 704 mm Z2-axis: 620 mm E2-axis: 720 mm Rapid traverse X/Y/Z-axis: 30 m/min SPINDLE 1 Max. speed: 5,000 rpm Spindle nose: A6k Spindle bore: 65 mm Draw tube bore: 65 mm Chuck diameter: 210 mm Drive power: 24 kW SPINDLE 2 Max. speed: 7,000 rpm Spindle nose: Ø 110 mm Spindle bore: 42 mm Draw tube bore: 42 mm Chuck diameter: 140 mm Max. chuck jaw weight: 1.25 kg Output power: 16.5 kW Max. speed for driven tools: 8,000 rpm Number of tool turret stations 1: 12 Number of tool turret stations 2: 10 All tool positions are driven Ffodoym Ai Hopfx Adaow MACHINE DETAILS Control: FANUC SERIES 31 i-MODEL A Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 80 A Dimensions & Weight Installation dimensions (L x W x H): 4,500 x 2,400 x 2,400 mm Machine weight: 9,000 kg Read operating hours: 5,381 h EQUIPMENT Chip conveyor by KNOLL Tool holders (as shown in the photos are included) External reference: Dürr

Condition: like new (used), Year of construction: 2021, operating hours: 600 h, functionality: fully functional, machine/vehicle number: MT 65 G2, The machine is like new. Fjdpfx Aeyttiqodaefw

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Ffsdou U R E Aepfx Adaew

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: P10243, Citizen CINCOM M12 – Swiss / Sliding Headstock automatic lathe Year of manufacture: 2000 Year of manufacture of the feeder: 2009 Technical data: • Max. bar diameter: 12 mm • Max. turning length: 200 mm • Main spindle speed: 12,000 rpm • Spindle power: 2.2 kW • Counter spindle speed: up to 10,000 rpm • Number of axes: 7 (C-axis on both spindles) • Machine weight: 2,580 kg • Control: CNC Cincom / Mitsubishi M6 • C-axis and driven tools – milling, drilling, threading possible Equipment: • LNS Express 332 bar feeder (2009) • Guide bushings • Live tools • Set of fixed holders • No chip ejector The set also includes a large set of guide bushings (GB) and bushings for the LNS feeder in various diameters – visible in the photos. The photos show the complete set of tools for two identical machines that we sell. • when purchasing both machines – we provide the entire set of bushings • when purchasing one machine – the tooling will be divided between the machines Ffsdpoyqvx Aofx Adaow Tool list: Gang tool post: T1-T5 fixed tools T6-T8 driven tools (holders included) Turret: T20-T29 fixed or live tools, possibility to install more than one tool per station. Backspindle tool post: T41-T43 fixed tools, no possibility of installing driven holders Technical condition: The machine is in very good condition, after technical inspection, ready for immediate operation. Application: Precision automatic lathe for serial production of small turned parts from Ø 1–12 mm bar stock. Additional information: • Nameplate: Citizen Watch Co., Ltd., type M-12, no. M212/0257, weight 2580 kg, S/N P10243. • Full documentation available and possibility of voltage testing. • Transport and loading at the buyer's request.

Condition: good (used), Year of construction: 2013, functionality: fully functional, CNC machining center DMG DECKEL MAHO DMF 260-11 with travelling column, suitable for machining large and heavy components in the energy, engineering, or automotive sectors. The machine is equipped with a modern DMG ERGOline control panel and a robust design for high precision and stability during machining. Technical specifications Axis travels X: 2600 mm Y: 1100 mm Z: 900 mm Table Table size: 3200 × 1100 mm Max. table load: approx. 4000 kg Spindle Fsdpfx Aoyrrcyjdaofw Max. speed: 10,000 rpm Taper: SK40 / SK50 (depending on configuration) Control system Siemens / Heidenhain (ERGOLINE panel) Tool magazine Up to 60 positions Machine weight Approx. 25,800 kg Power supply 400 V / 50 Hz Connected load approx. 77 kVA (according to nameplate) Equipment Fully enclosed working cabin Automatic tool magazine Cooling system Chip conveyor DMG ERGOline control panel Paper filtration of coolant

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC lathe with sub-spindle, two turrets with driven tools, upper turret Y-axis travel 50 mm. Year of manufacture (possibly with repairs, major overhaul): 2005. Upper turret ball screw on X-axis replaced in 2011. Clamping cylinder for spindle no. 1 replaced around 2018. Bearings on both spindles replaced in 2011. Both turrets have undergone continuous overhaul. Technical specifications: - Swing over bed: 700 mm - Maximum turning diameter: 520 mm - Distance between spindle faces: 1500 mm - Sub-spindle travel: 1100 mm Model: CNC lathe Emco Hyperturn 690MC TCMY plus with sub-spindle, two turrets with driven tools, upper turret Y-axis travel 50 mm. Control unit: Siemens Sinumerik 840D. Accessories: - Driven tools: 2 straight, 2 angular - Toolholders: 2 through-bore, 2 surface-mount Ffsdpfoyrqnuex Adaew - Chucks: 2x hard base jaws Complete documentation for the machine. Additional spare turret head available – fully overhauled.

Condition: used, Year of construction: 2019, max. workpiece diameter 400 mm max. workpiece length 300 mm control FANUC travel -x axis 995 mm travel -z axis 580 mm max. turning speeds 2.850 U/min no. of tools in turret 12 Stk./pcs. driven tools turning speeds 6.000 U/min Vertical Turning Machines | 2 x EMAG VL 8 equipped with driven tools and Track Motion TM loading system Both machines show the following operating hours: - Power-on hours: approx. 16,300 hrs Ffjdpeynnuwefx Adaow - Spindle hours: approx. 9,950 hrs An extensive package of tools and clamping equipment is included in the scope of delivery. The machines are in very good condition and can be inspected under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL8 | VL-8

Condition: used, Year of construction: 2003, Technical details: turning diameter: 270 mm weight of the machine ca.: 6,5 t Fedpex Dlhlofx Adaefw max. swing diameter: 590 mm with automatic loading and unloading system, chip conveyor G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools. *

Condition: good (used), Year of construction: 2026, feed length X-axis: 6,000 mm, feed length Y-axis: 500 mm, feed length Z-axis: 200 mm, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes Ffedsytb Dcspfx Adasw - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231494, FANUC, high-performance computer series 31i-B5, Well maintained, approx. 9,000 operating hours Technical Main Data Working Range Max. bar diameter: 38 mm Max. machining length (with guide bushing): approx. 320 mm Machining without guide bushing possible (for shorter workpieces) Max. collet diameter at sub spindle: 38 mm Main Spindle Spindle power: approx. 11–15 kW Max. speed: approx. 7,000 rpm Integrated C-axis (0.001° resolution) High-precision spindle bearings for heavy-duty machining Sub Spindle Power: approx. 5.5–7.5 kW Max. speed: approx. 7,000 rpm Full-function C-axis Part transfer and rear machining in one setup Axis Configuration X1 / Z1 (main system) X2 / Z2 (sub spindle system) Y-axis for off-center milling operations C-axis on main and sub spindle Fjdpfeymmkbsx Adasfw Optional B-axis type swivel functions (depending on equipment) Multi-channel control enables simultaneous machining on main and sub spindle for significantly reduced cycle times. Tooling Tool holder set (non-driven) Guide bushing unit (pull system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit), type Müller combistream CS 3 Coolant: oil Weight: 6.25 t Dimensions (LxWxH): 3477x1860x1865 mm The machine can be inspected under power by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: ready for operation (used), Schiess 32 DZ Type: 32DZ 300/350-325/160 De Schiess DZ-tafeldraaibank met twee staanders is geschikt voor alle soorten draaiwerk. Tafeldiameter: 3000 mm Maximale belasting: 44 ton Snelheid: 1 100 tpm Ffodpfx Aov Sfnxsdaow Maximaal overdraagbaar koppel op de tafel: 10.000 kpm Snijkracht op de wagen: 5000 kp Vermogen: 75 kW CNC-besturing: BOSCH (Kogelomloopspindel) Heidenhain lineaire schaal Horizontale verplaatsing van de gereedschapshouder vanaf het midden van de tafel: 2510 mm Verticale verplaatsing van de dwarsbalk: 1600 mm Verticale slag van de gereedschapshouder: 1600 mm Gereedschapshouder kan 30° naar links en rechts kantelen Maximale hoogte van het werkstuk: 3420 mm Maximale diameter van het werkstuk: 4020 mm Gereedschapswisselaar met 12 gereedschapsposities

Condition: ready for operation (used), chuck outer diameter: 6,000 mm, controller model: Siemens/Heidenhain, empty load weight: 2,20,000 kg, Type: SD 600/6500 4 assen gerichte, kogelomloopspindels tussen kolommen: 6500 mm maximaal hoogte onder dwarsbalk: 4270 mm verticale beweging van de dwarsbalk: 2500 mm maximaal gewicht op tafel: 160 ton koppel van de tafel: 30.000 MKP, 200 PK Verticale beweging van Z1 Z2: 1750 mm Twee onafhankelijke schaarliften aan elke kant van de draaibank, met bedieningseenheid Max turningdia -- passage: 6500 mm Power on the spindle: 200 HP Max hight of workpiece Z-axis: 4270 mm Ffodpjwaiuqofx Adajw Number of speeds: 1 > 40 rev/min Long: 20 500 mm Wide: 8500 mm Height: 6290 mm (above ground-level)

Condition: ready for operation (used), chuck outer diameter: 1,250 mm, controller model: E.C.S CNC 1402, empty load weight: 17,000 kg, 5000 kg maximaal op tafel KM 50 gereedschappen Max turningdia -- passage: 1400 mm Power on the spindle: 60 kW Fsdpfx Adexqh R Njaofw Max longitudinal travel X-axis: 2700 mm Max hight of workpiece Z-axis: 750 mm Number of speeds: 2-430 rpm - max 450 Nm Power needed: 3 x 380 V TOOLING: yes Turret: yes Qty Tools: 24 Coolant pump: yes Light: yes

Condition: ready for operation (used), controller model: Siemens Sinumerik 840C, total width: 2,850 mm, total height: 2,300 mm, swing diameter over cross slide: 1,500 mm, additional equipment features: yes, Uitgerust met Shunk chuck dia 500 mm VDI-tools Voor het voltooien van moeilijke bochten! CNC-hoogrendementsdraaibanken, waarvan de sterke punten vooral tot uiting komen bij harddraaien. Een belangrijk kenmerk van alle Monfort-draaibanken is de hydrostatische ronde geleiding, die slijtagevrij is en een geoptimaliseerde trillingsdemping heeft. Bovendien levert deze op lange termijn optimale oppervlakteresultaten bij draaien, frezen, boren en draadsnijden. • Hoge stijfheid tegen snijkrachten • Zeer goede demping van trillingen • Dit resulteert in een lange standtijd • Hoogste draainauwkeurigheid • Weerstand tegen continue spanning • Absolute vrijheid van slijtage • Droog bewerken is mogelijk Monfort-lagers maken gebruik van hydrostatische lagersystemen en geleidingen. De voordelen hiervan zijn: - Uitstekende loopnauwkeurigheid - Uitstekende dempingseigenschappen - Hoge stijfheid, onafhankelijk van de snelheid Ffjdpoyl A Efofx Adajw - Goede thermische stabiliteit - Geen slijtage en dus langdurige nauwkeurigheid - Langere standtijd van het gereedschap Vergelijkbaar met de Hembrug hydrostatische precisiedraaibank Swing over bed: 720 mm Max longitudinal travel Z-axis: 1500 mm Max cross travel X-axis: 320 mm Spindle cone: A2-11 Dia of spindle bore: 110 mm Power on the spindle: 62 kW Number of speeds: 4000 rpm Length: 5600 mm with scrap conveyor Weight: +-8500 kg Toolchanger: yes Number of tools: 12x

Condition: ready for operation (used), chuck outer diameter: 700 mm, total height: 3,415 mm, controller model: Siemens 840D Solution Line, empty load weight: 17,000 kg, Type: Ultrix 800 RT De Ultrix 800 RT is een multifunctioneel bewerkingscentrum met 5 geïnterpoleerde assen en een beweegbare portaalconstructie voor snel frezen, draaien, slijpen, boren, tappen, afwerken, ontbramen en voorbewerken van complexe onderdelen. Bij gebruik voor draaien verticale draaibank: - Draaibereik: 1100 mm - maximaal gewicht van het werkstuk: 700 kg - 40/30 kW op de tafel - Maximaal koppel op de tafel: 1500 Nm - Maximale snelheid van de tafel: 800 rpm!! - hydraulische klemming op tafel - gereedschapsconus voor draaien: KM63 - Gereedschapswisselaar met 150 posities, waarvan 24 voor draaien. Bij gebruik voor frezen, slijpen, boren, ... bewerkingscentrum: - X-as: 800 mm - Y-as: 900 mm - Z-as: 600 mm - A-as: -30° / 110° - C-as: continu - maximaal gewicht van het werkstuk: 700 kg - 55/40 kW op de spindel - maximaal koppel op de spindel: 18 / 16 Nm - maximaal 40.000 toeren per minuut - gereedschapsconus voor frezen: HSK-E40 - Gereedschapswisselaar met 150 posities en 126 gereedschapsposities voor frezen, slijpen en boren Lijst met opties die op de machine zijn gemonteerd: Ffsdpfx Adextgkaoaew 1 - Hogesnelheidsspindel met 40.000 tpm 2 - tafeldiameter 700 mm met hydraulische klemming 3-150-positie gereedschapswisselaar 4 - spanentransportband 5 - koelsysteem met terugwinning 6 - regeling van de koelvloeistoftemperatuur 7 - hogedrukkoeling (40 tot 70 bar) deurspindel 8 - rookafzuigsysteem 9 - doos voor het verzamelen van chips 10 - Voorinstelsysteem en gereedschapsintegriteit: laser- en mechanische meetsonde voor meetinstrumenten 11 - Renishaw-sonde Max turningdia -- passage: 1100 mm Power on the spindle: 40/30 kW Long: 4655 mm Wide: 5890 mm Turret: yes Qty Tools: 150 positions Coolant pump: yes

Condition: ready for operation (used), chuck outer diameter: 3,200 mm, total height: 7,155 mm, controller model: Siemens 840D, empty load weight: 65,000 kg, Type: SKD 32B Siemens 840D CNC-besturing 2017 Tafeldiameter: 3200 mm Maximale zwenkhoek: 3500 mm Maximale belasting op tafel: 50 ton Hydrostatische tafel!! Vermogen op tafel: 120 kW Torsiesterkte: 132 Kn 2 variabele snelheidsversnellingsbak: ,8 80 tpm Verticale verplaatsing van de dwarsbalk: 2100 mm Maximale werkstukhoogte: 2550 mm 2 gereedschapskoppen op dwarsbalk CNC gestuurd - horizontale beweging van gereedschapskop nr. 1: 1400 mm - verticale beweging van gereedschapskop nr. 1: 1500 mm - horizontale beweging van gereedschapskop nr. 2: 1980 mm - verticale beweging van gereedschapskop nr. 2: 1350 mm - rotatiehoek van de gereedschapskop: -/+ 30° Max turningdia -- passage: 3500 mm Power on the spindle: 120 kW Number of speeds: 1 > rpm / > 80 rpm Power needed: 195 kVa Long: 10045 mm Fsdpfx Adov Rwh Ijajfw Wide: 8120 mm

Condition: ready for operation (used), chuck outer diameter: 1,600 mm, controller model: E.C.S CNC 2600, Mario Carnaghi TG10/1600 - Ø 1700 mm CNC Max turningdia -- passage: 1700 mm Power on the spindle: 70 kW Fsdpfx Ajxqh R Ajdajfw Max longitudinal travel X-axis: 1965 mm Max hight of workpiece Z-axis: 750 mm Number of speeds: 3.5 - 300 rpm TOOLING: yes Turret: yes Qty Tools: 12 Coolant pump: yes Light: yes

Condition: ready for operation (used), self aligning set of welding rotators one driven unit Ffsdpsx Enhyofx Adaew one non-driven unit max load capacity: 300 ton max rolling capacity: 450 ton speed range: 60 1200 mm/min min diameter of workpiece: 1000 mm max diameter of workpiece: 7800 mm spare wheels included Max weight on both supports: 450 ton Number of wheels: 24 wheels Dia x width wheels: dia 580 x 140 mm Coating material on wheels: steel

Condition: ready for operation (used), chuck outer diameter: 1,620 mm, total height: 4,650 mm, empty load weight: 20,000 kg, + zijsteun Elektrisch vernieuwd in 2007!!! Max turningdia -- passage: 1700 mm Ffodpfxsyl A Hps Adaow Power on the spindle: 37 kW Max hight of workpiece Z-axis: 1290 mm Digital screen: Heidenhain 2 axes Number of speeds: 3,5 - 150 rpm Long: 4550 mm Wide: 2670 mm

Condition: ready for operation (used), empty load weight: 1,60,000 kg, total length: 12,000 mm, total width: 7,000 mm, total height: 10,000 mm, laadvermogen: 300 ton tafeldiameter: 9500 mm Ffsdpfxexpkh Ij Adajw variabel draaien en variabel kantelen 180°

Condition: ready for operation (used), Schiess 80 DF Type: 80 DF 700/900-550/280 Originele CNC-machine van Schiess (geen ombouw van conventioneel naar CNC) Volledig hydrostatische machine Gelaste kolom Siemens-motor Uitgerust met een controlelift om de bovenkant van het werkstuk te bekijken Machine met zeer hoge tolerantie Tafeldiameter: 7000 mm Maximale diameter van het werkstuk: 9000 mm Maximale belasting: 315 ton Snelheid: 0,25 25 tpm Maximaal rotatiekoppel: 63.000 kgm Maximale snijkracht met uitgeschoven ram tot 900 mm: 12.500 kg Gereedschapskop kan -40° tot +40° kantelen Vermogen: 125 kW gewicht van de tafel: 71 ton Ramsectie: 380 x 380 mm Ffsdpov Rwdpefx Adasw Horizontale verplaatsing van de ram vanaf het midden van de tafel: 5640 mm Verticale slag van de ram: 2800 mm Maximale hoogte onder dwarsbalk: 5547 mm Horizontale verplaatsing van de dwarsbalk: 4700 mm Uitgerust met 3-positie automatische gereedschapswisselaar Totaalgewicht van de machine: 260 ton! Unieke eigenschap er zijn 3 mogelijke configuraties van de hoofdkolom: 1 - voor maximale zwenking 9000 mm (zoals momenteel ingesteld) 2 - voor max. zwenkbereik 10.500 mm 3 - voor maximale swing 13 100 mm Dit kan worden bereikt door de hoofdkolom opnieuw op het fundament te positioneren.

Condition: ready for operation (used), chuck outer diameter: 3,000 mm, empty load weight: 48,000 kg, Type: SC 33 - Morando-licentie Tafeldiameter: 3000 mm Maximale zwenkhoek: 3300 mm Maximale werkstukhoogte: 2300 mm Maximale belasting op tafel: 18 ton Vermogen op tafel: 60 kW Tafelsnelheid: 1,02 92 tpm 1e VERTICALE STEUN Ramsectie: 236 x 230 mm Verticale beweging van de steun: 1500 mm 2d VERTICALE STEUN met torentje - 5 posities Ffedev Sfrqspfx Adaow Verticale beweging van de steun: 1000 mm Max turningdia -- passage: 3300 mm Power on the spindle: 60 kW Digital screen: Axom Evolution 3 Number of speeds: 1,02 > 92 rpm

Condition: ready for operation (used), BELANGRIJKSTE KENMERKEN: Tafelafmetingen: 3000 x 3500 mm Omgeschreven cirkel: 4300 mm Toelaatbare belasting (gelijkmatig verdeeld): 50 ton op 3000 x 3500 mm Totale tafelhoogte zonder cilinder: 1.250 m Aantal T-gleuven, breedte 36 H7: 13 T-sleufafstand: 250 mm Lengteverplaatsing: 2700 mm Longitudinale voedingen / bed: • positionering: 2 mm/min • werkend: 1 tot 3000 mm/min • snel: 3000 mm/min Fjdpfxsxpggys Adasfw Circulaire feeds: • werkend: 0,0006 tot 0,6 tpm • snel (50-tons belasting): 0,6 tpm Nominaal koppel van longitudinale motor/bed: 9,4 mkg Nominaal koppel van cirkelmotor/tafel: 22 mkg Totaal geïnstalleerd vermogen: 50 kVA Tafelgewicht (zonder elektrische apparatuur): 31.000 kg