Used Bsb 600 for sale (11,539)

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Dodoziywrspfx Ai Secn Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,151 h, load capacity: 5,000 kg, lifting height: 5,060 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,600 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Non-marking Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire condition: 40 - 60% Battery voltage: 80V Battery capacity: 930Ah Battery year of manufacture: 2022 Dedezuhgxopfx Ai Secn Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, load guard, full cabin, full free lift, joystick, LED.

Condition: new, CNC double-head mitre saw equipped with Ø 600 mm saw blades, designed for precise and automated cutting of profiles. The machine features a robust electro-welded steel base and consists of one fixed cutting unit and one mobile cutting unit with electronic positioning along the X-axis. Both cutting heads are equipped with controlled rotary axes (RF and RM), allowing automatic positioning of the cutting units at angles ranging from 45° inward to 20° outward. The saw blades are operated by hydro-pneumatic cylinders, with adjustable feed speed and rapid return. Main features: CNC double-head mitre saw Ø 600 mm saw blades One fixed and one mobile cutting unit Electronic positioning of the mobile unit – X-axis Controlled rotation of both cutting heads – RF and RM axes Cutting angle range: 45° inward to 20° outward Dedjztb Hpjpfx Ai Sjcn Hydro-pneumatic blade feed Adjustable blade feed speed Rapid blade return Horizontal clamping system with double cylinders Vertical profile clamping system Pneumatically operated safety guards for the cutting areas 15” touch-screen monitor Windows 10 platform Programming and management of cutting operations via touch-screen interface Provision for an industrial label printer for workpiece identification and association with the corresponding production order The machine is designed to provide precision, productivity and ease of operation, and can be easily integrated into the production process.

Condition: used, Year of construction: 2001, Manufacturer: CFS Model: BR6000/600 Year: 2001 Condition: Used Serial Number: 1381 Stock Number: 3317J Belt with: 600 mm Frying length: 6000 mm Heating: thermal oil, 388 kW Frying time: 25 - 250 sec Dedpfezwnb Iox Ai Socn Compressed air: 4 - 6 Bar Power: 3 x 415V, 50Hz, 8kW Dimensions: 8700 x 2300 x 3900 mm Weight: 4250 kg Teflon infeed, separate infeed conveyor, hold down belt, circulation pump, oil level control, sediment removal, electrical hoists, prepared for CO2 fire extinguisher

Condition: excellent (used), Year of construction: 2020, Pallmann PS-H 600/900 plastic shredding line. Mill chamber dimensions 600x900mm, power 75/90kW. Very good condition. Line components: Dedpszxup Iofx Ai Secn 1. Conveyor, Keiper product Drive power 1.1 kW Belt working width 600 mm Center distance 5500 mm 2. Surface metal detector, type FS 650, manufacturer Sesotec Detection width 640 mm Detection sensitivity for FE ball at detection height of 20 mm: 2.5 mm Detection sensitivity for FE nut at detection height of 100 mm: M6 3. Cutting mill, PS-H 600x900 F3/SD5, PALLMANN product 4. Volumetric feeder, type RVR 10, WAM product Drive power 0.75 kW 5. Screw conveyor, type TME219/0440, WAM product Drive power 2.2 kW 6. Sifter, type R25, Waltinger manufacturer Drive power 1.5 kW 7. Fan, type MXE063-008030-00, Reitz product Flow rate: 80 m3/min Total pressure increase 630 daPa Drive power 15 kW Rotational speed 3,000 rpm 8. Filter, type PA 7x8-2500, Tama product Residual dust content: < 20 mg/m3 Filter area 54 m2 Exhaust air 4800 m3/h 9. Filter, type PA 6x5-2000 CCD, Tama product Residual dust content: < 20 mg/m3 Filter area 23 m2 Exhaust air 2100 m3/h 10. Fan, type MXE031-003530-00, Reitz product Flow rate: 35 m3/min Total pressure increase 315 daPa Drive power 3 kW Rotational speed 3,000 rpm 11. Metal separator, type Rapid Vario FS 100, Sesotec product Removal duration (adjustable) 0.5-29 s Compressed air connection (hose) 6/8 mm Working pressure 5-8 bar 12. Screw conveyor, type TMS219/0540, WAM product Drive power 2.2 kW

Condition: new, Leuze Lumiflex safety light curtain CT 14-600 / 561106, compact transmitter / sender + CR 14-600 / 564106 receiver / receiver, serial number: 5044403, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Dsdpfx Aijzp Tpbj Socn

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kunzmann WF 600 M milling machine (2012) Manufacturer: Kunzmann Type: WF 600 M Year of manufacture: 2012 Condition: used, very good Control: Heidenhain TNC 124 X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Table length 650 mm Table width 350 mm Spindle speed 4500 rpm Vertical spindle and horizontal spindle - SK40 Hydraulic tightening system Main drive motor: 5.5 kW Dimensions approx.: 2 x 2 x 2 m Weight approx. 2000 kg Coolant system Scope of delivery: - Documentation Dcedpfxeztxnde Ai Sjn - Machine light - Machine feet - Machine vice

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box Dcsdpfezk D T Hex Ai Sen -Clamping cube: heavy version -Material: Cast iron -Dimensions: see photos / technical drawing -Number: 4x mounting cubes available - Price: per piece -Dimensions: 600/400/H400 mm -Weight: 165 kg/unit

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 16,144 h, load capacity: 2,000 kg, lifting height: 5,515 mm, free lift: 1,811 mm, fuel type: diesel, mast type: triplex, construction height: 2,454 mm, drive type: Diesel, Diesel forklift truck ISO class: ISO class 2 = 1,000 - 2,500 kg Dcsdpfx Asx N Aa Eoi Sen Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Good Description: Half cabin Sideshift, 3rd valve, 4th valve,

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 9,887 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: electric, mast type: simplex, construction height: 3,454 mm, drive type: Elektro, Electric 4-Wheel Forklift Mast Type: Standard Condition: Ready for use and fully functional Technical Condition: Good Battery Voltage: 80V Battery Year of Manufacture: 2017 Description: Camera Sideshift, 3rd valve, 4th valve, Heating, Full Cab, Air Conditioning, Dodpfswdk Ndox Ai Secn

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 450 h, load capacity: 2,000 kg, lifting height: 3,450 mm, fuel type: gas, mast type: simplex, construction height: 2,377 mm, drive type: Treibgas, LPG forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Dedszvi I Hepfx Ai Sscn Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Sideshift, 3rd valve,

Condition: used, functionality: limited functionality, Year of construction: 2014, operating hours: 12,150 h, load capacity: 3,000 kg, lifting height: 5,130 mm, free lift: 1,555 mm, fuel type: electric, mast type: triplex, construction height: 2,321 mm, drive type: Elektro, Electric four-wheel forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Not operational Technical condition: poor Battery voltage: 80V Dsdpfxszvtv Ij Ai Sscn Description: Half cabin Side shifter 3rd valve

Condition: ready for operation (used), Year of construction: 2007, overall weight: 27,000 kg, spindle speed (max.): 6,000 rpm, This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, it's ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine. • Axes: 4 • Maximum Machining Area X/Y/Z: 1000 mm x 900 mm x 1000 mm • 4th Axis: 360° x 1° • Rapid Feed Rate: 30 m/min – 12 m/min • 1° B-axis • Drive Power/Max. Torque: 37 kW 10 min, 26 kW continuous load / 606 Nm • Tool Positions: 150 • Tool Holder: MAS BT 50 • ConSep System Dsdpfszycdcox Ai Socn • Measuring Probe • Tool Breakage Monitoring • Pallet station with 6 pallets, pallet size 630 x 630 mm • External cooling/internal cooling 20 bar/internal air Dimensions Machine Depth 10500 mm

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,180 h, load capacity: 3,500 kg, lifting height: 4,400 mm, fuel type: electric, mast type: simplex, construction height: 3,054 mm, drive type: Elektro, Electric 4-wheel forklift Dedpfx Aieyw U Nhj Secn ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 80V Sideshift, fork positioner, 3rd valve, 4th valve, heater, full cab, air conditioning,

Condition: excellent (used), Year of construction: 2006, Arburg 370 S 600-290 (2006) Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Dcjdpfx Aiszrv Irs Sen Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door/ramp combination, side door Equipment: - Aero Poly body - Ramp/door combination - Supports Net price: €15,546.22 / Gross price: €18,500.00 Article number: BVB235401820.01 Dcjdpfxjzy Awce Ai Sjn Technical data: • Brand: Brian James • Model: Box Van 600 • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 419 x 178 x 201 cm • External dimensions (LxWxH): 589 x 228 x 259 cm • Loading height of the floor: 44 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,025 kg • Payload: 2,475 kg • Chassis: High-loader (wheels under the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Black body made of high-quality, glass fiber reinforced plastic. Light in weight, yet extremely stable. • Daylight roof extending the entire length of the trailer. • 12-inch aluminum rims - black/silver • Maneuvering handles at the front and rear • Side doors on the front left and right, lockable • Full-height and full-width rear tailgate, lockable • Innovative door/ramp combination with extremely simple operation via the door lock: Can be used as a hinged door, ramp, or a combination of both. • Both ramps at the rear can also be individually switched to function as a door. • Internal height 2010 mm - Entry height at the rear 1990 mm • Recessed lashing rails on the left, right, and in the middle in the floor • Numerous lashing points offer flexible lashing options • Lashing rails mounted on the left and right on the side wall • Very stable steel frame, welded • Frame completely hot-dip galvanized • Spare wheel with holder mounted • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Reversing assistance system • Steel casting coupling head with integrated high-security lock ALKO • Plastic mudguards • Rear supports at the rear on both sides with clamping bracket • 13-pole plug • Reversing lights • LED interior lights recessed in the roof with solar panel • Large LED safety lighting • Integrated rear fog light • Various marker lights at the front, side and rear • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired additions! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, 3000 mm Working width 600 mm Wheel width 600 mm roll diameter 90 mm number of rolls 12 Stck. work height max. 800 - 950 mm Colour blau / rot weight 200 kg - straight version - stable construction - high load-stable stability Dcjdpfx Aisuap S So Son - Height-adjustable feet

Condition: used, Year of construction: 2011, The BAADER 600 Meat Separator is a compact, efficient, and reliable machine designed for the gentle separation of soft tissue from harder components such as bone, cartilage, tendons, or skin. Manufactured in Germany in 2014, this model is ideal for food processors looking to maximize yield while maintaining product quality and texture. Technical Specifications: Manufacturer: BAADER Type: 600-501 Year: 2011 Mesh size: 3 mm Power rating: 400V / 3Ph / 50Hz / 2.0 hp / 1.5 kW / 4.0 A Wiring diagram: 600.70.00.854 Weight: 290 kg Dimensions: L: 102 cm, H: 123 cm W: 95 cm Country of origin: Germany ✅ Key Features: Dedpfxszx Dx So Ai Sscn Gentle product handling – preserves the structure of meat, poultry, or fish High-precision 3 mm mesh – perfect for fine separation Compact and lightweight – easy to install in any production line Low energy consumption – only 1.5 kW Easy to clean and maintain – made from food-grade stainless steel Ideal for fish, poultry, and red meat applications Built with high-quality German engineering for long-term reliability BAADER 600 Meat Separator is a proven solution for processors aiming to improve product recovery, reduce waste, and optimize efficiency in soft tissue separation.

Condition: used, Year of construction: 2018, type of input current: three-phase, input current: 15 A, input voltage: 400 V, We offer this used Chiossi & Cavazzuti Asso 600 digital print machine dryer, year of construction 2018, PERFECTLY functional + extra motor (never had to use, just have it for backup) Power: 9.5 kW Phases: 3+PE Dodjzzd Nvepfx Ai Sscn Current: 15 A Voltage: 400 V Frequency: 50/60 Hz Serial number: 1908 Product code: 1390047 Year of manufacture: 2018 Weight: 440 kg Location: HUNGARY, Szolnok 5000 ZIP If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 725 h, load capacity: 5,000 kg, lifting height: 4,030 mm, free lift: 1,230 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, fork length: 2,000 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 Dodpfszwacwjx Ai Secn ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Automatic Condition: As new Technical condition: very good Front tire type: Non-marking Front tire condition: New Rear tire type: Non-marking Rear tire condition: New Battery voltage: 80V Battery capacity: 930Ah Battery type: PzS Battery year of manufacture: 2016 Description: Price includes a new UVV inspection, 4x SE non-marking tires NEW, lighting according to STVZO, paintwork in as-new condition (original), the 2016 battery will be regenerated with a power cycler including Kappa test (a new or recently refurbished battery can be purchased for an extra charge), charger included with plug, ex-rental unit from Still Germany. We will gladly arrange cost-effective transport for you. A lease-purchase option is generally possible. We are an official Jungheinrich partner. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, STVZO compliance, full cabin, full free lift, CE certificate, scale, rotating beacon, Mini lever, Bluespot

Condition: used, Year of construction: 2022, machine/vehicle number: 102003026, overall weight: 341 kg, load capacity: 600 kg, protection type (IP code): IP52, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 600 kg Max. speed: 2 m/s Protection rating: IP52 MACHINE DETAILS Dimensions & Weight Dodezwn S Tjpfx Ai Sscn Transport dimensions (L × W × H): approx. 1,380 × 1,000 × 1,180 mm Weight: approx. 341 kg The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: new, Year of construction: 2024, 600 kg load capacity Welding rotary table, height-adjustable Dodsg Tdpgjpfx Ai Sscn with through-hole, 100 mm Plate diameter 700 mm Height in horizontal position, min. 0.65 m, max. 1.25 m Height in tilted position, min. 0.45 m, max. 0.95 m Speed range from 0.01 - 1.3 RPM Tilting angle up to 135° Hand and foot remote control with speed indicator very robust

Condition: new, Year of construction: 2025, load capacity: 600 kg, 600 kg load capacity Welding turntable height adjustable with through hole 100 mm Plate diameter 700mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.3 rpm Tilt up to 135° Hand and foot remote control with speed display Dsdpfjr Tr Axsx Ai Sjcn Very robust Chuck at extra charge depending on version and size

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding turntable with a plate diameter of 1000 mm. Dcjdpfx Aisd D D Hls Ssn Height: min. 0.65 m, max. 1.530 m. Speed: 0.01 - 1.1 rpm. Tilting angle: up to 135°. Hand and foot remote control with speed display. Very robust.

Condition: new, Year of construction: 2026, machine/vehicle number: 93934631, fuel type: diesel, motor manufacturer: QSZ13-G10, General information Field of application: Construction Weights Empty weight: 5.255 kg Functional Djdsy T D Daepfx Ai Sjcn Generator capacity: 600 kVA Dimensions of cargo space: 451 x 160 x 250 cm CE mark: yes Other information Fuel consumption: 80 Liter per Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 875 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Including Coolant Heater and Battery Charger