Used Bubble Wrap for sale (836)

Year of construction: 2012, condition: like new (used), We have a Buhrs 1000 poly wrapping system available. Year 2013. You could modify this system to paper wrapping if you like. This machine is later on completed with a extra base and two extra rotary feeders SYSTEM INFORMATION System brand: Buhrs Machine type: Buhrs 1000 Poly Wrapping System Bjdshid Adopfx Andodi (max.13.000 c/h) Year: 2013 CONFIGURATION 1 Buhrs 1000 main product feeder, type shuttle feeder 1 Buhrs 1000 master base station 4 Buhrs 1000 rotary feeder 1 Buhrs 1000 module for filmpackaging with double action sealbar, max 13.000

Condition: refurbished (used), Year of construction: 2004, functionality: unexamined, total width: 1,200 mm, total length: 5,000 mm, total height: 2,000 mm, product height (min.): 850 mm, film width: 420 mm, The machine can process both hard and soft film, is capable of tray forming, product gas flushing, and has forming tool cooling, or can perform only vacuum forming. Various forming tools included: 1:1; 1:2; 1:3; additionally, slice packs with peel corner are possible. Comes with a fully refurbished vacuum pump. Also included are approximately 50 rolls of film. The machine must be removed from the premises, hence special price for everything: €3,000 negotiable. Bodpsynnlcefx Andedi

Condition: used, Year of construction: 2015, Overview This Atlanta Giotto is a single-lane wrap-around case packer for end-of-line carton packaging of PET bottles, rated at more than 20 cartons per minute. It erects the wrap-around case around the bottle group from a flat blank held in an inclined magazine, and closes it with a hot-melt glue unit. Neutral and printed carton both run on the machine. The machine was built in 2015 and ran on a mineral water bottling line until early 2025, packing 1.5 l PET bottles in 4 x 3 cartons and 1.0 l PET bottles in 5 x 3 cartons. It was operated alternately with a shrink-film bundling process, so its operating hours are low. Control is a Siemens S7 PLC with a touchscreen HMI panel. Infeed and outfeed conveyors, motorisation and the CE control panel are part of the machine. Technical data - Manufacturer: Atlanta - Model: Giotto - Year of manufacture: 2015 - Machine type: single-lane wrap-around case packer - Capacity: more than 20 cartons/minute - Infeed: single lane, inclined carton magazine - Carton formats: 80 x H262 mm for 1.5 l PET bottles, 87.5 x H322 mm for 1.0 l PET bottles - Pack patterns: 4 x 3 bottles in 1.5 l PET, 5 x 3 bottles in 1.0 l PET - Carton: neutral or printed - Case closing: hot-melt glue unit - Control: Siemens S7 PLC with touchscreen HMI panel - Length: approx. 7,175 mm machine body, plus 1,300 mm infeed conveyor - Width: approx. 2,345 mm - Height: approx. 2,336 mm - Infeed height: min. 1,050 mm - Weight: approx. 800 kg magazine section, approx. 2,250 kg packer body - Power supply: 25 kW - Compressed air: approx. 400 Nl/min at 6 bar - Infeed belt: acetal, 685 mm wide Equipment - Infeed and outfeed conveyors - Inclined carton magazine - Hot-melt glue unit - Motorisation and CE control panel - Siemens S7 control with touchscreen panel Bdjdpfjzxtyrjx Andei - Electrical and mechanical drawings - Service and maintenance manuals - Spare parts books Condition Used, in very good condition with a low number of operating hours. The machine was in production until early 2025 and has since been dismantled and moved into storage. It can be inspected dismantled in the warehouse by appointment. Availability Immediately available. Location: Italy. Lifting, craning, loading and transport are available on request and are not included.

Condition: used, Year of construction: 2009, machine/vehicle number: FA71, Technical Specifications & Performance DataThe SMI SK450 T is a shrink wrapping machine for PET bottles, designed for secondary packaging applications within a used bottling line. Manufactured in 2009, this second hand unit includes a heating oven for controlled shrink-film processing and bundle formation. It is configured for industrial packaging operations requiring stable, transport-ready bottle packs.Manufacturer: SMIModel: SK450 TYear of production: 2009Capacity: 45 packs/minuteContainer type: PET bottlesIncluded equipment: Heating ovenPackage configurations: 0.5L in 3x3, 0.75L in 2x3, and 1.5L in 2x3Advanced Automation & Control SystemsThis shrink wrapping machine is intended for coordinated operation in an industrial packaging environment, where bottle infeed, film handling, heat shrinking, and discharge must remain synchronized. Its operating setup supports repeatable bundle production for the stated PET bottle formats. Installation and commissioning should include verification of the existing control interface, electrical connection, conveyor synchronization, and heating-oven operating parameters.Production Line Integration CapabilitiesThe SK450 T can be positioned downstream of filling, capping, labeling, or accumulation equipment to create multipacks for distribution. In a beverage production line, shrink wrapping provides a practical secondary-packaging stage between bottle handling and palletizing. The machine is suited to PET bottle bundles in 3x3 and 2x3 arrangements, allowing the line to handle the documented 0.5L, 0.75L, and 1.5L formats.For integration into a used bottling line, upstream and downstream conveyors should be matched to the machine's infeed and discharge flow. The heating oven forms part of the packaging process and should be assessed together with film transport components, bottle guides, and pack transfer arrangements during installation planning.Machine Condition & Maintenance HistoryThe machine is in production and remains operational until 30 September 2026. It is described as being in very good condition, with regular maintenance and extensive annual overhauls carried out by the manufacturer. This maintenance history is relevant for buyers seeking second hand bottling equipment with documented attention to operational continuity and packaging performance.Operational Performance & VersatilityWith a stated output of 45 packs per minute, the SMI SK450 T supports efficient shrink-film bundling of PET bottles for industrial packaging. The documented pack patterns provide flexibility for common beverage production formats, including compact 0.5L bundles and larger 0.75L and 1.5L bottle configurations. Shrink wrapping helps produce stable multipacks suitable for handling, storage, and onward palletizing.Installation Requirements & Site PreparationSite preparation should provide sufficient space for the shrink wrapper, heating oven, safe material flow, and access for operation and maintenance. The installation layout should account for bottle conveyors, film supply, bundle discharge, and connection to downstream packaging machinery. Electrical services and any required line utilities should be checked... Bedpfx Anoztwl Iodsdi

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, product height (max.): 450 mm, product height (min.): 90 mm, product length (min.): 230 mm, product length (max.): 800 mm, product width (max.): 500 mm, product width (min.): 120 mm, Equipment: documentation/manual, The production line is a complete system suitable for packaging all types of AFH tissue paper products. The line begins with a conveyor belt which serves as a buffer. The end of the conveyor belt can be lowered, enabling the machine to handle all types of hand towels. Following the conveyor belt is an Italian-made MAC DUE stacker, which is capable of stacking toilet roll in 1, 2 or 3 layers. This is followed by another conveyor belt, which connects the stacker to the packaging machine. Next comes the CB 150A universal, fully automatic packaging machine, designed in Italy for packaging AfH tissue products. The packaging machine is highly flexible, easy to set up and operates automatically. The maximum packaging speed is 5 packs per minute. Following the packaging machine is a shrink tunnel, which is integrated into the packaging machine. The MAC DUE HMI is a new DELTA model. The CB 050A packaging machine’s PLC (OMRON) comes with a new program; the electrical cabinet was rewired in 2022, and a diagram of this has also been drawn up, which I will provide with the machine. This packaging machine’s HMI is also a new Delta model. I will provide the source programs for both the HMI and the PLC with the machine. The production line was dismantled on 12 July 2026 due to the purchase of a new machine. Bsdpfx Anjzvym Tjdsdi The machine is packed and in storage, ready for delivery at any time. Commissioning can be arranged on request, but it is straightforward to install and I can also provide online support. Numerous videos have been made of the machine.

Condition: used, Traysealer Multivac T350 These Multivac T-350 tray sealers are ideally suited for packaging food, medical, and pharmaceutical products. The automatic tray sealer achieves up to 6 cycles per minute, providing high production capacity. This sealing machine can process various types of trays, including plastic (PE, PP, PET), aluminum, and foam trays. The tray sealer can perform sealing, vacuum packaging, and MAP packaging (gas flushing). It is an ideal packaging machine for meat, fish, game, poultry, cheese, pet food, baby food, and other products. The machine is completely manufactured from stainless steel. Production capacity: 6 cycles/min Functions: sealing, vacuum, MAP gas flushing Equipped with: 2-compartment format: (2x) 158 x 125 mm Optional: Busch vacuum pump, 160 m³/h Bedpfxezulkhj Andedi Voltage: 400 V (3 + N, 50 Hz) Power: 7.5 kW Dimensions (W x D x H): 3870 x 1150 x 2050 mm

Year of construction: 2020, condition: like new (used), For sale: Certis Tendo 2000 arm wrapper – year of manufacture 2020 Certis Tendo 2000 pallet wrapper, manufactured by C&C Group in Italy. Suitable for wrapping palletized goods with stretch film. With this arm wrapper, the wrapping arm rotates around the pallet while the load remains on the ground. This makes the system particularly suitable for heavy or less stable pallet loads. Machine data: Brand: Certis / C&C Group Model: Tendo 2000 Bdsdj Adz H Iepfx Andji Year of manufacture: 2020 Serial number: C1901471M Power supply: 230 V Type: rotating arm wrapper Condition: little used Available documentation: Instruction and maintenance manual Operating manual Parameter list Electrical diagram Parts list arm wrapper, rotating arm wrapper, pallet wrapper, pallet wrapping machine, stretch wrapper, film wrapper, stretch film wrapper, rotary arm pallet wrapper, rotating arm stretch wrapper, pallet wrapping machine, Dreharmwickler, Palettenwickler, Stretchwickler, banderoleuse à bras tournant, filmeuse palette, avvolgipallet, owijarka ramieniowa, used, second-hand, used, gebraucht, occasion, 2020, 230 V rotary arm pallet wrapper, rotating arm stretch wrapper, rotary arm wrapping machine, pallet stretch wrapper, pallet wrapping machine, stretch wrapping machine, stretch film wrapper, semi-automatic pallet wrapper, used pallet wrapper, second hand stretch wrapper arm wrapper, rotating arm wrapper, arm wrapping machine, pallet wrapper, pallet wrapping machine, film wrapper, film wrapping machine, stretch wrapper, stretch film wrapper, stretch film wrapper, pallet sealing machine, pallet packaging machine, semi-automatic pallet wrapper, used pallet wrapper, second-hand arm wrapper

Condition: reconditioned (used), Year of construction: 2005, machine/vehicle number: 3069 / BM5132, BM5132 Professional wrapper with stretch film height adjustment Wrapping height approx. 2,500 mm Turntable diameter 1,600 mm max. load 1,600 kg Film roll width 500 mm Weight approx. 500 kg Supply voltage 400V - 50 Hz - 3 Ph Bdjdpfx Asqpgl Rendoi

Condition: good (used), Banding machine Willy Heckmann WHU 200E Bdodpjz Db Npofx Andsi The machine is like new, ready to work. Manufacturer: Willy Heckmann GmbH & Co. Simple controls. An indispensable device on expeditions, for packing heavy parcels, e.g. with leaflets or catalogues. A strip of PP tape strengthens the packaging and additionally creates a handle that allows us to easily grab and transport the package. Adjustable tension force. Goal size 850x600mm Strap width 12mm Power supply 230V Weight 200 kg Ask About The P

Year of construction: 2012, condition: excellent (used), Mobile pallet wrapper Inventory no. 3844 Manufacturer: Robopac Type: Robot Worker FRD Year of manufacture: 2012 Technical data (approx.): * Wrapping height max. 2200 mm Bedpfxezp R S Hj Andedi * Max. width unlimited * Min. width approx. 600 mm * Travel speed adjustable * Film width 500 mm * Core diameter max. 76 mm * Weight approx. 340 kg * Equipped with new batteries * In very good condition!

Condition: used, Year of construction: 2013, Used Wrap Around SGE year 2013 – 3000 boxes/hour General Technical Description Bdedpfxewbgzde Andsi The Used Wrap Around SGE year 2013 – 3000 boxes/hour delivers high-efficiency carton packaging for PET and glass containers. S.G.E. manufactured this machine in 2013, and since then, it has served as a reliable solution for secondary packaging in bottling lines. Not only does the structure support demanding industrial use, but it also ensures consistent and repeatable operation. Furthermore, the machine integrates seamlessly into most bottling layouts. Importantly, the Used Wrap Around SGE year 2013 – 3000 boxes/hour reaches this output capacity thanks to the integration of a divider insertion system, which places cardboard dividers (commonly known as alveare) between bottles. This feature stabilizes the packs during carton folding and gluing operations, and ensures safe handling, especially in multi-row configurations. The machine is configured to work with bottles of 0.75 L and supports multiple carton formats, including 3×2, 3×4, and 3×6. This format versatility enhances its adaptability across a wide range of packaging needs. Configuration and Performance of this Used Wrap Around SGE The Used Wrap Around SGE year 2013 processes up to 3000 cartons per hour, both in the 3×2 and 3×4 formats. Consequently, the 3×2 configuration yields 18,000 bottles per hour, while the 3×4 configuration handles 36,000 bottles per hour. The 3×6 configuration further extends the machine’s capacity, allowing even higher bottle output depending on the production layout. The machine uses a straight-line infeed system that guides bottles into the carton blank positioning area. Once the bottles are in place, the system folds a flat carton blank around them and seals it using hot-melt glue. The entire process—forming, folding, and gluing—is mechanically synchronized to ensure high packaging precision. Moreover, the modular design allows for fast format changes and simplified maintenance. Above all, the machine maintains stable output even during peak production. Electrical and Mechanical Specifications The machine operates on 400 Volts, 50 Hertz, and draws a maximum of 42 kW. This power supports key functions such as motorized feeding, carton forming, and gluing. Additionally, S.G.E. designed the wrap around with rugged components, which resist wear and ensure long-term reliability. In fact, engineers can easily access all mechanical areas, simplifying maintenance and diagnostics. For this reason, the machine suits production environments that require both uptime and durability. Safety and Operational Condition S.G.E. equipped this Used Wrap Around with a complete set of safety devices. Therefore, the machine complies fully with European safety regulations for operator protection. At present, it remains in storage; however, all its main systems are preserved under controlled environmental conditions.

Condition: used, Offered for sale is an automatic shrink-wrapping system with film feed and shrink tunnel. The system consists of a packaging machine with an enclosed working area and a downstream shrink tunnel. Control system: Control panel with display, membrane keypad, control buttons and emergency stop button. Equipped with film roll holder, film guide, motorized conveyor belts, transparent protective enclosure and signal light. Inspection possible by arrangement. Bdjdpfx Anoz N E Ubodoi

Condition: ready for operation (used), functionality: fully functional, total width: 1,030 mm, total length: 3,540 mm, total height: 1,560 mm, input voltage: 400 V, overall weight: 5,000 kg, type of input current: AC, input frequency: 50 Hz, input current: 25 A, temperature: 220 °C, Equipment: CE marking, Heidelberg SBG hot-foil stamping machine, suitable for high-quality decorative finishing of paper and board. Bjdpjz Hptnofx Andsdi The machine is in good condition, well maintained and has been carefully operated. It is suitable for hot-foil stamping. Machine Highlights Manufacturer: Heidelberg Model: SBG Machine type: Hot-foil stamping and embossing machine Maximum sheet size: approx. 560 × 770 mm Maximum stamping area: approx. 540 × 750 mm Hot-foil stamping Embossing Suitable for paper and board Good condition Well maintained Carefully operated Ready for continued professional use Inspection possible by appointment The Heidelberg SBG is a proven and robust machine for professional hot-foil stamping and finishing applications. Further technical specifications, photographs and additional information are available upon request

Condition: ready for operation (used), Year of construction: 2012, Offered is a horizontal flow wrap packaging machine (HFFS). Material types: heat-sealable films (BOPP, PET/PE, Alu/PE), cold-seal films, film width max.: 500mm, roll diameter max.: 350mm, core holder: 75mm, product dimensions X/Y/Z: 40mm-350mm/10mm-220mm/0mm-100mm, production output: 120-150bags/min. Viewing possible by appointment. Bdedpfx Asy Ax Ulsndsi

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, input voltage: 400 V, DGUV certified until: 06/2027, working width: 550 mm, conveyor belt width: 650 mm, type of input current: three-phase, total width: 840 mm, total length: 1,300 mm, total height: 1,250 mm, input frequency: 50 Hz, TOP Croissant Rolling Machine Gio 4 CF with long roller with infeed conveyor Bdedpfx Aew Tub Iendsi Weight range approx.: 50-2000g depending on the product for the production of sticks, loaves, and croissants Rolling width max.: 550 mm Long roller adjustable up to 650 mm width Stainless steel design, mobile Dimensions approx.: 840 x 1300 x 1250 mm, WxDxH Used machine with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Delivery Maintenance contract Service package Training & commissioning We have more long rollers in stock!

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 2550, Pallet wrapper, wrapping machine with turntable, pallet packaging machine with table Bdedeznb Snepfx Andoi Manufacturer: Boehl Model: BLZ 2020 Year: 2004 Machine No.: 2550 Turntable size: 2000 mm Wrapping height: H-2618 mm

Condition: used, Offered for sale is an automatic shrink-wrapping system with film feed and shrink tunnel. Control system: Siemens SIMATIC HMI operator panel with display and emergency stop button. Equipped with film roll holder, film guide, protected packaging area, material support table, conveyor section, side safety guards with access doors, separate shrink tunnel with roller conveyor and extraction unit. Inspection possible by arrangement. Bdedpfxsz N E U Io Andoi

Year of construction: 2016, condition: like new (used), functionality: fully functional, BÖHL JUNIOR S 450 VA fully automatic packaging machine / wrapping machine for spirally wrapping long goods with packaging material (typically stretch film) Product dimensions • Width: 15 – 220 mm • Height: 15 – 120 mm • Length: approx. 600* / 800 mm to 6,000 mm • Weight: approx. max. 3,000 kg / 6 meters including carriage - maximum cross-sectional diagonal of the product: 220 mm (customer-specific) Note: max. weight only possible if transferred with a powered, in-house conveyor system. (A) 600 mm* without carriage (B) 800 mm with carriage or distance between carriages min. 600 mm Packaging materials Bdsdpezn Ipyjfx Andji • PE stretch film, thickness approx. 17 – 50 μm (recommended 23 μm) • Roll diameter max. 400 mm • Roll width max. 125 mm • Core diameter 76 mm Specifications • Wrapping ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency-controlled) Technical data • PLC control Siemens S7 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 7 kW • Pre-fuse 35 A • Noise level 75 db (A) • Operating pressure 6 bar • Air consumption approx. 20 standard liters per cycle Technical section • Packaging material feed and mechanical pre-stretch system for 125 mm • Automatic clean-cut cutting unit for the packaging material • Electromotoric height adjustment of the wrapping ring • Automatic height detection of the product via light barriers • Packaging material tear and end detection • Pneumatic pressure rollers on the infeed and outfeed sides • Powered transport rollers on the infeed and outfeed sides in the machine • Quick-change device for packaging material rolls • Manually adjustable side guide plates as side centering in the infeed • SIEMENS frequency inverters for wrapping ring drive and feed • Complete electrical control, SIEMENS PLC S7 with touch panel • 2 m powered conveyor system with PU-coated rollers in the infeed area • 2 m powered conveyor system with PU-coated rollers in the outfeed area Packaging program - the following packaging programs are included: Wrapping - the product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product (edge protection). The overlap of the film during wrapping can be adjusted using a frequency inverter. Wrapping with intermediate bandages - the bundling points are activated by means of a timer. The product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product. In addition, stability bandages are wrapped. The transport is stopped after adjustable distances, and layers are wrapped in place for an adjustable time. The overlap of the film during wrapping can be adjusted using a frequency inverter. This program may eliminate the need for strapping bands in some cases. Bundling - the bundling points are activated by means of a timer. The product is not wrapped along its entire length. Film bandages are wrapped, and the number of layers per bundling point is adjustable. The distance between the bundling points can be preset via the timer. Continuous transport without wrapping Machine dimensions (without safety fence): • Length: 1,930 mm • Width: 1,500 mm • Height: 2,200 mm • Conveyor height: 900 mm • Machine weight approx. 1,600 kg Operating side: on the right in the direction of transport Paint: machine RAL 7032, gray The system is in VERY GOOD technical and optical condition.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Manufacturer: REMUND AG (Switzerland) Type: Vacuum packaging machine Capacity: 1–4 bags/cycle Year of manufacture: 2002 Bedpfsz Hdbtsx Andodi Workstations: 2 Products: Cheese, meat, and other large-format food products Equipped with modified atmosphere packaging (MAP) PLC: Siemens S7 Condition: very good and fully functional

Condition: used, Semi-Automatic & Fully Automatic Pallet Wrapping Machine Manufacturer: Cousins Model: LPSWA-CE (“The Switch Semi2Auto”) Operating Type: Semi-automatic & Fully automatic Year of Manufacture: 2021/2022 Features and Specifications of the LP-SWA SERIES Production Speed: Up to 35 loads per hour. Load Capacity: Maximum load weight: 4,500 lbs dynamic – 10,000 lbs static Maximum load size to safely pass through the tower: 67" x 67" (96" load diagonal) x 80" H Maximum load size to remain within the turntable: 46" W x 46" L (65" load diagonal) x 80" H Low-profile turntable: 65-inch diameter, laser-cut steel plate with all-around deck protection. Maintenance-free 54-roller bearing support system. Turntable height 2.813 inches from the ground. Bjdpswb A N Rofx Andedi ANSI No. 50 direct chain drive with chain tensioner. Rotational speed between 3 and 12 RPM with smooth start acceleration. 1/2 HP AC motor with variable speed. End-of-cycle deceleration and positive stop alignment. Robust all-around deck to protect the turntable, 3-sided loading, and pit mounting. Forklift openings front and rear for easy movement. Accu-Count precise turntable positioning system for additional film savings! Film carriage lift: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and anti-drop protection Automation Features: All-electric – No pneumatics required Patent-pending A-arm film cutting and holding device starts and ends the wrapping process at the top of the load. Cousins Smart Engineering has developed an advanced cutting and holding device with the A-arm. It offers significant productivity improvements and safety benefits. This technology is only available on Cousins machines. This unique method of applying and cutting the stretch film offers the following advantages: • Selectable top wrapping function • Stabilizes the load early in the wrapping cycle • Places the film end at the top of the load instead of at the bottom • No film clamp on the turntable that can be damaged by dirt or operator error – also, no slip rings are needed to power the turntable, reducing maintenance • The placement of the load on the turntable is not critical • No air connections or noisy compressors • New automatic load detection safety feature during the first rotation detects uneven or partially stacked top layers and automatically adjusts the A-arm height to avoid obstacles • A-arm anti-drop protection Control Functions: Electronic control with LED user interface Wireless start/stop remote control with one transmitter (additional transmitters available) On/Off/Reset switch and operating indicator Automatic wrapping cycle start/pause with a single button Cycle pause for applying top sheets Reinforce wrapping control for the wrapping center Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Control of film tension (force-to-load) Separate speed controllers for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height sensor for dark or glossy loads Separate control for 1 to 12 wraps for upper and lower wrapping Selectable parameters for reduced film tension for top wrapping

Condition: used, Year of construction: 2002, An automatic Pfankuch collating and OPP film wrapping machine for flat products is offered. Max. film roll width: 600mm, max. film roll diameter: 250mm, film core diameter: 76mm, film thickness range: 15µm-40µm, max. production output: 100packs/min, product-dependent, top film material: polypropylene OPP/COEX/Cast, bottom film: polypropylene OPP/COEX. Dimensions: approx. 6000mm/1000mm. Documentation available. Inspection possible by arrangement. Bdedpfx Ajzvgh Rondji

Condition: used, Year of construction: 2011, Supply voltage: 400V, Frequency: 50Hz, Current consumption: 60A, Power: 38kW, Auxiliary voltage: 110V AC. The system was in operation from 2012 to 2017 and is currently dismantled. The machine is in very good used condition. An on-site inspection is possible by appointment. Bodpj Aalnnefx Andjdi

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS21, Exhibition unit ATLANTA NEOS stretch wrapper with articulated arm 99 individually storable programs Start/stop at the same position (corner counter) Wrapping height 2000 mm Mast height approx. 1500 mm (fits through almost any door and in almost any van) Powerstretch PRS 200% film (more available as an option) Motorized pre-stretch system with stepless adjustment Electronically controlled film tension via control unit IEF quick-loading system for easy film roll changes Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit (available as an option) Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series Minimum 160 pallets per Charging – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (pallet included) 2,150 mm Height measurement via light sensor or dimension input on the display Protective bar for emergency stop of the drive Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push buttons for start & stop Machine function compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Upward and downward carriage speeds independently adjustable - Upward carriage speed from 1.3 to 5.4 m/min - Downward carriage speed from 1.3 to 5.4 m/min - Number of wraps at the pallet base (1-10 wraps) - Number of wraps at the pallet head (1-10 wraps) - Pallet wrapping height adjustment - Film application tension for foot and head wrapping / ascending and descending, independently adjustable - Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable Bsdpfxez Iq Trj Andsdi - Ergonomic height for film changes ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable wrapping programs for the NEOS arm - Cross wrapping (upward/downward) - Simple wrapping (upward only or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a preset height (with the height sensor deactivated) - Wrapping cycle for large pallets - Wrapping cycle for top sheet film - Soft start cycle for applying edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp edges Pallet edge wrapping Wrapping cycle with manual or motorized cord formation (optional) Further systems available immediately from our Ludwigsburg warehouse Also available with the ARYA system – automatic film application possible

Condition: like new (used), Year of construction: 2003, functionality: fully functional, 30 packs/min – Siemens Simatic OP7 Shrink wrapping and bundling machine suitable for cosmetics and small packaged products. The machine forms bundles and wraps them in film, followed by a shrink tunnel for tight packaging. Equipped with upper and lower film reels and a manual film splicing system. The shrink tunnel features a cooling section at the exit and adjustable speed control. The machine accommodates different product and bundle formats and is supplied with documentation. Maximum output: 30 packs/min Hinge chain conveyor width: 80 mm Shrink tunnel conveyor width: 480 mm Bjdpfxjyt Hiqo Andedi Control panel: Siemens Simatic OP7 Film system: Upper and lower film reels with manual splicing Shrink tunnel: With cooling section at the exit Speed control: Adjustable Product size (min / max) Length: 50 – 100 mm Height: 100 – 300 mm Width: 25 – 60 mm Bundle size (min / max) Length: 75 – 330 mm Height: 100 – 300 mm Width: 50 – 100 mm Additional information Overfeed system included Upper and lower film roll holders Documentation available

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: VD 07.08.469, type of input current: DC, We are selling our Kallfass shrink tunnel. The display is defective, but the rest of the machine is fully functional. Bdedpfx Aoy Snw Iondji Feel free to call if you have any questions.