Used C Frame for sale (59,237)

Condition: good (used), C-frame press Capacity unknown, estimated pressing force 40 tons Maximum workpiece height: 250 mm Throat depth: 510 mm Stroke: 250 mm Itsdjx A Tygepfx Abcsd Weight: 3000 kg Stroke up and down adjustable via limit switches Note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we advise you to verify all relevant details. Financial information VAT/margin: VAT: The shown price is excluding VAT (VAT deductible for businesses)

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Table size 650x650mm Ram size round 140mm Stroke 130mm requested power 4 KW Weight 2000Kg height 2100mm width 1100mm Iodpfofcw Apjx Abcetd depth 1500mm

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions Iedpfx Abjcmat Ujcstd

Condition: used, Year of construction: 2017, functionality: unexamined, Used HEGLA Glass Packlifter & Sheet lifter with frame – Sold as Seen Offered for sale is a used HEGLA glass transport and handling system, comprising steel support frames, vertical transport racks, safety guarding, and an integrated access platform with stairway. Manufactured by HEGLA Maschinenbau GmbH & Co. KG (Germany), this robust industrial system is designed for the safe unloading of packs, and handling of large glass sheets within a production environment. Key details  Manufacturer: HEGLA Maschinenbau GmbH & Co. KG Type: Transporteinrichtung (Transport System) Year of manufacture: 2017 Load capacity: 3,000 kg Max load height: 2,550 mm Approx. machine weight: 940 kg CE marked Construction & features: Heavy-duty steel frame construction Multiple vertical glass support racks with rubber contact pads Integrated safety fencing and guarding Access platform with industrial steel staircase and handrails Overhead beam structure suitable for handling integration Floor-mounted and free-standing sections Condition: Used, with visible cosmetic wear including paint chips and surface marks consistent with normal industrial use Structurally complete and previously operational at time of decommissioning No testing carried out since removal Sale terms: Iodpfex Tpg Hsx Abcjtd Sold as seen No warranty given or implied Buyer responsible for inspection, loading, and transport Power, controls, and ancillary equipment only included where visible in photos

Condition: new, For sale: professional pump from the Italian manufacturer LOWARA (Xylem). Model BGM11/C E2 – the pump is new, unused, and has only been in warehouse storage. The set includes the original packaging and instruction manual. The pump is ideal for water systems in domestic and industrial applications. Technical specifications: Manufacturer: LOWARA Model: BGM11/C E2 Power P1: 1.34 kW Power supply: 230 V (single phase) Frequency: 50 Hz Capacity: 20–70 l/min Max head: 30–45.5 m Max pressure: approx. 8 bar Protection class: IPX5 Liquid temperature: up to 40°C Material: stainless steel (inox) Iodpfoyvambjx Abcjtd Weight: approx. 14 kg

Condition: new, For sale: industrial twin screw pump (twin spindle) by the renowned manufacturer Leistritz Nürnberg. The pump is new / stock item, unused – in excellent condition, as pictured. Itjdpfoyga U Hox Abcod Identification data (from nameplate): • Manufacturer: Leistritz Nürnberg • Type / Series: LN • Model: 48/80-F-C • Serial number: 6812.129 • Design: twin screw pump (twin screw / twin spindle) Features and advantages: • Two intermeshing screws (no metal-to-metal contact) • Very low flow pulsation • Suitable for various media viscosities • High operational reliability and durability • Bidirectional operation possible • Industrial-grade continuous operation Applications: • Oils and lubricating media • Industrial and process installations • Hydraulics, power industry • Cooling / lubrication systems • Process applications Condition: • New • No damage • Ports sealed with caps • Price listed is for 1 piece.

Year of construction: 2007, condition: used, Empty weight: 430 kg Iodpfx Absyr Rr Hjcetd Dimensions (LxBxH): 280 x 180 x 247 cm - Year: 2007 - Documentation available: No - CE certificate present: No - Serial number: 070118M - Transport dimensions: 2800mm x 1800mm x 2470mm (l x w x h) - Transport weight [kg]: 430kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 1993, 5 fermentation and storage tanks (104 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap and central outlet. 1 white beer fermentation tank (81 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap, yeast chute and central outlet. 1 batching/flotation tank (122 hl) with flat conical base, frame and cone cooling zone, manhole, sampling tap and central outlet. The tanks are also available individually or in partial quantities. Itodpfx Aovcq D Tobcod Additional title: 7 pcs. of vertical, coolable stainless steel tanks Volume fermentation- and storage tanks: 10474 l per piece Volume wheat beer tank: 8071 l Volume flotation tank: 12242 l Material: stainless steel 1.4301 Position: standing on feet Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, central spout, yeast chute

Condition: ready for operation (used), sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, power: 17 kW (23.11 HP), total length: 4,400 mm, total width: 2,200 mm, total height: 2,205 mm, empty load weight: 10,500 kg, workpiece length (max.): 3,100 mm, cnc backgauge cnc cutting angle cnc knife play Isdpfx Abjx Immgscetd CNC ELGO Strokes/min: 11 > 40 str/min Adjustable cuttingedge: 0,5° > 2,5°

Condition: ready for operation (used), sheet thickness steel (max.): 6 mm, power: 9.5 kW (12.92 HP), total length: 4,800 mm, total width: 2,500 mm, total height: 2,300 mm, empty load weight: 12,000 kg, workpiece length (max.): 4,100 mm, throat depth: 150 mm, CNC-hoekregeling volgens materiaalsoort en dikte CNC-messpeling volgens materiaalsoort en dikte CNC-achteraanslag (ook opvouwbare achteraanslag) met pneumatisch plaatondersteuningssysteem met transportband met schrootbak met stapeleenheid Ijdpoyldq Nefx Abcjtd Strokes/min: 10 > 30 str/min Adjustable cutting device: 0,05 > 0,8 ° Backgauge: 1000 mm - MNC 10

Condition: excellent (used), Year of construction: 2011, CNC profiling center Weinig Conturex 2 for milling, drilling, and sawing in cross and longitudinal processing Model: C 124 Year of manufacture: 2011 Isdpoypb Adefx Abcstd Very good condition Working width: 40-260 mm Working height: 25-150 mm PowerGrip clamp table, table support length: 2 x 2280 mm Workpiece length without repositioning cycle: 220 - 2700 mm Workpiece length with one repositioning cycle: 2700 - 4500 mm Workpiece length with multiple repositioning cycles: 4500 - 6000 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, conveyor belt length: 3,400 mm, conveyor belt width: 400 mm, total length: 3,400 mm, total width: 500 mm, overall weight: 80 kg, power: 0.37 kW (0.50 HP), input frequency: 50 Hz, Equipment: type plate available, Aluminum frame conveyor belt 540x3400mm with new belt for sale Length: 3400 mm Belt width: 440 mm Full frame width: 540 mm Belt top plane (height): 1060mm geared electric motor 0.25kw 230/400v Belt speed: 4m/min Iedpfx Asyaquqsbcetd Used conveyor belt, conveyor belt with new belt for sale from stock.

Year of construction: 2023, condition: as good as new (ex-display), functionality: fully functional, 2 units in stock, new machine warranty, warehouse stock, original packaging, immediately available With safety system for solvent-based substances according to DIN 1539. Matching charge trolleys in stock (see picture). Please contact us! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters Ijdsl Dw T Aopfx Abcjtd - Tmax: 260°C - Controller P570 / 50 programs with up to 40 freely programmable segments each - NtLog for controller: Data recording via USB stick - Air circulation: 3600 m³/h - Exhaust air volume: 390 m³/h - Additional equipment: Drive-in rails - Connected load: 39 kW - Net weight: 1150 kg - Incl. documentation, CE declaration We are happy to offer installation and commissioning. Viewing in our warehouse is possible by appointment. We supply new and used industrial ovens. Contact us! Oven, ovens, drying oven, kiln, heating oven, heated cabinet, industrial oven, tempering oven, preheating oven, annealing oven, temperature oven, drying cabinet, chamber oven, enameling oven, recirculating air drying cabinet, recirculating air oven, solvent oven, chamber dryer.

Condition: like new (used), Year of construction: 2007, functionality: fully functional, total height: 860 mm, pressing force: 1 t, overall weight: 105 kg, total width: 400 mm, table width: 200 mm, table length: 230 mm, type of input current: AC, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Rotation stop lever Iodpfxov E Sazs Abcetd height: 880mm length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. • Very low noise level (closed ventilation system). • Ventilation with the RHP® system to optimize the combustion process. • Cubic design with transverse fan. Iedpfxed Aqqzo Abcotd • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven manufacturer HERAEUS Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Internal volume: 180 liters temperature controller and timer air mixing voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: width 800 mm, length 890mm, Itjdsvzqyfjpfx Abcod height 810 mm. Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg

Condition: new, For sale: Robust, precision industrial coupling from the renowned Japanese brand C-max / Fuji Seiko Co., Ltd. Model: 51288015900 Production date: 17.01.2006 The coupling is intended for use in CNC machinery, drive systems, industrial automation, spindles, and rotary axes. Equipped with a four-point mounting flange and sleeve mounting with locating balls. ⸻ Technical data: Itjdpew Rdviefx Abcod • Outer diameter: 81.03 mm • Flange diameter (bolt hole spacing): 63.04 mm • Total length: 52.96 mm • Inner sleeve diameter: 31.46 mm • Locating element with groove: 50.75 mm ⸻ Manufactured from high-grade steel, stored as warehouse stock – condition very good, minimal storage marks. Original manufacturer's packaging with Japanese label. /////Price per piece/////

Year of construction: 2011, condition: good (used), Drying oven, tempering oven Caltherm 200 C Isdpfxovu Hvps Abcstd For sale in excellent condition, CALTHERM manufactured air-mixed multi-purpose Convection oven heat treatment oven electrically heated oven with one chamber, with air mixing manufacturer: Caltherm J7172 year of manufacture: 2011 internal dimensions: width: 300cm height: 200cm length: 185cm over design temperature:200 °C Test Temperature: 200 °C Time to get to set point: 45 min number of elements: 12x 3,6kw fan motor: 15kw Total recommended Power supply of plant : 100A Type of temperature control: West 6400 external dimensions: width: 430cm length: 330cm height: 300cm weight: ca 4800kg

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Itsdpfjdvad Eox Abced Mr: Marcel Brahms Mr: Simon Blank Here we offer you a used load distributor of the manufacturer Dexion for purchase. These can also be used for other manufacturers. The load distributors are designed for a shelf life of 800 mm suitable. Included in the scope of delivery: 01x load distributor, used Material colour: completely galvanized Total length: approx. 980 mm C-profile dimension: approx. 185 x 35 mm Opening for shelf feet: approx. 115 mm Weight / piece: approx. 10,074 Kg To distribute the field loads over a larger area. Our services at a glance: (prices on request) Mounting, construction our general terms of assembly are to be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out in accordance with the Requirements of BGR 234 visual inspection for all rack systems Delivery with our own vehicle fleet (without unloading)

Condition: good (used), The scope of delivery includes: 01x C-profile, used profile dim.: C: 50 x 50 x 15 mm Material color: sendzimir galvanized total length: approx. 2.775 mm Ijdpsnfvbpofx Abcetd material thickness: approx. 2,00 mm weight / pcs.: 7,080 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm material color: sendzimir galvanized total length: approx. 1.865 mm center-center-hole: approx. 1.825 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Itodpfsnbd Ursx Abced Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), Scope of delivery includes: 01x C-profile, used Material color: Sendzimir galvanized Overall length: 7,200 mm Itsdsw Hgwcopfx Abcod Profile dimensions: C 360 x 100 x 35 x 10 mm Material thickness: approx. 4 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be inquired about with us separately depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm Material color: sendzimir galvanized total length: approx. 1.015 mm center-center-hole: approx. 975 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional Isdpfxenbfapo Abcetd additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: excellent (used), Mr: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery: 01x C-profile, II. choice Manufacturer: SSI Schäfer Material color: sendzimir galvanized total length: approx. 1.510mm profile dim.: C 100x60x10 mm material thickness: approx. 3,0 mm Remark: - Since this is a used product may be damaged, holes, welds or other rust approaches may be present. General information about the item: This item is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Itjdpfxsh T Avxj Abcsd Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Year of construction: 1976, condition: ready for operation (used), Output: 20t/h, with Burner Weishaupt WM-GL 20 3-A, fuel: oil, natural gas, year of construction: 2018, various elements were renewed in 2018. Itjdonn Aaiepfx Abcod