Used C Frame for sale (58,340)

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Bdjdpey Hkd Hofx Airoi Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, mileage: 7,70,913 km, power: 324 kW (440.52 HP), first registration: 02/2015, fuel type: diesel, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, power assisted steering, traction control, = Additional options and accessories = - Autoradio - CD - Climate control - Double glazing - DVD - EBS - Electrically operated mirrors - GPS navigation - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - Refrigerator - Reverse camera - Sun visor - Tachograph - TV/Video Bodpfx Aioy Hwgnsrjdi = More information = Engine capacity: 12.419 cc Dimensions (LxBxH): 1326 x 255 x 384 cm Make of engine: MAN

Condition: used, CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal supports to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Bdodpfx Aiezh Htworoi Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2017, operating hours: 1,158 h, load capacity: 1,400 kg, lifting height: 2,930 mm, fuel type: electric, gearing type: automatic, overall weight: 1,100 kg, empty load weight: 853 kg, color: orange, mileage: 1,158 km, first registration: 04/2017, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, Still EXV 14 C – a reliable electric high-lift pallet truck with an automatic transmission. Are you looking for a reliable and practical high-lift pallet truck that is ideally suited for daily use in a warehouse? The Still EXV 14 C combines a compact design, comfortable operation, and the proven quality of STILL – a compelling solution for efficient material handling in confined spaces. The vehicle was first registered in April 2017 and currently has 1,158 operating hours. This makes the EXV 14 C an interesting combination of proven service life and manageable operating hours. The automatic transmission enables comfortable and intuitive operation, allowing work processes to be carried out quickly and efficiently. Visually, the high-lift pallet truck presents itself in the typical orange STILL color and immediately conveys a professional impression. In daily warehouse operations, reliable technology, ease of use, and efficient processes are essential – and this is exactly where the STILL EXV 14 C demonstrates its strengths. Bjdpfozw Rizox Airjdi Whether for internal material transport, storage, or daily work in the warehouse: this STILL EXV 14 C is an interesting opportunity for companies that want to make their logistics efficient and economical. Take advantage of this opportunity now and learn more about the STILL EXV 14 C – a reliable assistant for efficient warehouse processes. Sales only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sales excepted.

Condition: new, power: 154 kW (209.38 HP), fuel type: diesel, number of seats: 28, gearing type: automatic, color: white, brakes: retarder, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Iveco Daily City, new vehicle with COC; also available with CNG engine, Telma retarder Permissible total weight: 7,200 kg - Iveco Daily Urbano - City/Intercity bus built on Iveco C70 chassis - Air-suspended rear axle - Telma retarder - Length: 8.40 meters, Width: 2.40 meters, Height: 3.16 meters - Body made of fiberglass - Ribbed frame construction made of galvanized steel - Front air conditioning - Diavia air conditioning in passenger compartment 'Madrid' 15 kW (thus, dual A/C) - Double glazing - Twin-width rear doors in low-floor section (electric operation) - Front single electric door with recessed entrance - Entry height front and rear max. 300 mm (without kneeling function) - Total capacity: 34 persons (24 seats — sleeper seats or city bus seats possible — plus 10 standing spaces, including 4 folding seats) - Wheelchair/pram bay - Convector heating in passenger area - Iveco auxiliary heater with water and timer - Interior lighting white/orange or white/blue - Grab rails with hand straps - 2 side luggage compartments + spare wheel hatch - Exterior color: white - Optional: LED headlights, custom paintwork, destination signs, interior monitor, WiFi, etc. available - ... Vehicle is eligible for subsidies in most German states and complies with Section 30d (4) StVZO Bdodpfx Aozyvp Sjiroi This is an example vehicle. It is not in stock. Delivery time is approximately 6 months. Low-floor rear starting from €164,990.00. School bus variants available from €149,990.00.

Condition: used, functionality: fully functional, machine/vehicle number: 14955, Year of construction: 2010, operating hours: 2,340 h, load capacity: 4,500 kg, lifting height: 5,500 mm, fuel type: diesel, construction height: 3,600 mm, battery voltage: 12 V, fork length: 1,350 mm, tire condition: 50 %, front tire type: cushion tires (black), front tire size: 200/50, rear tire type: cushion tires (black), rear tire size: 27x10-12, overall weight: 6,400 kg, empty load weight: 6,400 kg, total length: 2,500 mm, total width: 2,200 mm, Equipment: cabin, fork extension, lighting, sideshift, Combilift C4500 4-way forklift | Year of manufacture 2010 | Only 2,340 operating hours | Wide Traverse Carriage For sale is a well-maintained Combilift C4500 4-way forklift from 2010 with only 2,340 operating hours. The Combilift is ideally suited for the flexible transport and storage of long goods, wood, steel, profiles and other bulky materials. Thanks to the 4-way technology, the vehicle can travel both forwards/backwards and sideways, making it particularly suitable for use in narrow aisles. Technical data / Equipment: Manufacturer: Combilift Model: C4500 Vehicle type: 4-way forklift Year of manufacture: 2010 Operating hours: approx. 2,340 h Load capacity: 4,500 kg Special equipment: Wide Traverse Carriage, rear work lights, front work lights, roof protection, windshield, full cab, CE certificate, interior mirror Bsdpfx Aezvcc Deirodi Versatile for long goods and bulky loads The forklift is particularly distinguished by its low operating hours. The Wide Traverse Carriage expands the possibilities for handling different loads and dimensions. Inspection and test drive possible by appointment. Subject to prior sale and errors.

Condition: good (used), functionality: fully functional, Year of construction: 2009, operating hours: 1,825 h, lifting height: 11,950 mm, empty load weight: 6,550 kg, Telescopic articulated boom lift MANITOU 120 AETJC Year of manufacture: 2009 According to the meter reading: 1,825 operating hours 11.95 meters working height 9.95 meters platform height 7 meters lateral reach 200 kg payload 6,650 kg weight - Telescopic arm - Articulated arm Bdedpfx Aez Dvdhjirsi - White tires - Integrated charger - 48V - Ready for immediate use - Well-maintained machine - On request: new Austrian inspection certificate provided before delivery! Selling price: €7,700 net Affordable delivery also possible!

Condition: used, mileage: 13,13,000 km, power: 375 kW (509.86 HP), first registration: 02/2018, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, total length: 10,600 mm, total width: 2,600 mm, loading space length: 8,100 mm, loading space width: 2,500 mm, loading space height: 2,660 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, VOLVO FH 500 I-PARK COOL TRS COOLING VAN BEURDEN BOX WITH TAIL LIFT, EXCELLENT CONDITION Box: Cool / Freeze / Flowers Frigo Van Beurden 28 Refrigeration: Carrier TRS Iceland, temperatures from -30 to +30 degrees Tail lift: Dhollandia 2,000 kg First registration: 02/28 TÜV (technical inspection): 11/2026 Mileage: 1,313,000 km Engine power: 375 kW (500 hp) Transmission: Automatic Box dimensions (L x W x H): 810 x 250 x 266 cm (internal) Truck dimensions (L x W x H): 1060 x 260 x 400 cm (external) Tare weight: 13,960 kg Payload capacity: 14,040 kg Permissible total weight: 28,000 kg GCW: 50,000 kg Color: Red and Beige Suspension: Leaf suspension at the front, air suspension on axles 2 and 3 Emissions class: Euro 6 C Axle configuration: 6x2 Tire Axle 1: 385/65 R22.5 L60% R60% Tire Axle 2: 315/70R22.5 L30% R30% Tire Axle 3: 385/65 R22.5 L40% R40% Extras: Automatic transmission, engine brake, auxiliary air conditioning, auxiliary heater, refrigeration system, 2 beds, radio/CD player, TRS Carrier Iceland refrigeration system, temperature control between -30 and +30 degrees Celsius, fully insulated body (year of construction 28), extremely robust and in perfect condition, 3x stainless steel cargo securing rails in the floor and ceiling (including 3 bars), 1x horizontal cargo securing rail, numerous additional lights, pneumatic Rockinger trailer coupling, lift axle, ABS, EBS, complete service history available, directly from the first owner, immediately available and ready for use. Can be delivered with the following trailer: 2-AXLE BURG TRAILER VAN BEURDEN INSULATED BOX TRAILER TRS ICELAND Box: Cooling / Freezing / Flowers Frigo Van Beurden Chassis manufacturer and type: BURG BPM 00-20 TCZXX Refrigeration: Carrier TRS Iceland First registration: TÜV: 11/2026 Internal dimensions (L x W x H): 712 x 250 x 285 cm Tare weight: 5,660 kg Payload capacity: 14,340 kg Permissible total weight: 20,000 kg Suspension: Air suspension Axles: BPW axles with drum brakes Tire size: 265/70 R19.5 Tire tread depth Axle 1: L30%, R30% Tire tread depth Axle 2: L30% R30% Extras: Carrier TRS Iceland refrigeration unit, ABS, EBS, BPW axles with drum brakes, spare wheel, fully insulated box body from Van Beurden, 3x stainless steel rails in the floor and ceiling, 1x horizontal cargo securing rail, additional spotlights, rear doors, rear bumper, complete service history available, immediately available and ready for use. Further information: * Payload: 18140 kg * Type | First Axle: Michelin R * Tire Size | First Axle: 385/65 R22.5 * Tire Tread Depth Inside Left | First Axle: 60% * Tire Tread Depth Inside Right | First Axle: 60% * Maximum Axle Load | First Axle: 9000 kg * Type | Second Axle: Michelin R * Type | Third Axle: Michelin R * Tire Size | Second Axle: 315/80 R22.5 * Tire Size | Third Axle: 385/65 R22.5 * Tire Tread Depth Outside Left | Second Axle: 26% * Tire Tread Depth Inside Left | Second Axle: 30% * Tire Tread Depth Inside Left | Third Axle: 40% * Tire Tread Depth Outside Right | Second Axle: 30% * Tire Tread Depth Inside Right | Second Axle: 30% * Tire Tread Depth Inside Right | Third Axle: 38% Bjdoz Ddunjpfx Airodi * Maximum Axle Load | Second Axle: 11500 kg * Maximum Axle Load | Third Axle: 7500 kg * Wheelbase: 677 cm * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Load capacity: 2000 kg * Price on request: Yes * Position | First Axle: Front * Brand | First Axle: Other * Brake Type | First Axle: Disc brakes * Suspension

Condition: used, planer with 300 mm width and thickness router miter saw Bodjz Dp Hcspfx Airedi

Condition: used, Year of construction: 2005, operating hours: 61,407 h, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, For sale is an injection molding machine from Arburg, model 470 C 1600-800. The pump and one circuit board have been removed from the machine; therefore, the machine is being sold as defective. Otherwise, it is in very good condition. Technical specifications: Pump operating hours: 61,400 Clamping force: 1600 kN Distance between tie bars: 470 x 470 Ejection stroke: 225 mm Screw diameter: 50 mm Displacement: 398 cm³ Dimensions: 4335 x 1635 x 1950 mm Weight: 6950 kg The machine is offered without any peripherals. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices are plus VAT. Inspection is possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machine buying and selling WE BUY / SELL PRODUCTION & METALWORKING MACHINES, AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Bedpfoz Etu Hex Airedi For further information or contact options, please visit our website.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 207646, high-pressure hose length: 10,000 mm, pressure: 150 bar, input voltage: 230 V, The Kärcher HD 5/15 C Plus cold water high-pressure cleaner is a display unit in near-new condition. The compact, lightweight, and versatile HD 5/15 C Plus cold water high-pressure cleaner stands out with excellent mobility and is suitable for both upright and horizontal operation. The unit features ingenious accessory storage, and its brass cylinder head and automatic pressure relief ensure a long service life. At the same time, it impresses with innovative new developments that sustainably increase user comfort by allowing fatigue-free operation and quick setup and packing. The EASY!Force high-pressure gun makes use of the recoil force from the high-pressure jet to reduce holding force to zero, while the EASY!Lock quick-release fasteners provide handling up to five times faster compared to conventional screw connections, without compromising robustness and durability. Overall, a well-designed package that ensures outstanding cleaning results with high convenience and long service life. Bdsdpfx Aoyzni Neirei Technical data: Voltage: 230V Connection power: 2.8 kW Working pressure: 150 bar Power cable: 5 meters

Condition: used, Heraeus Type: HT 7012 S2 Heraeus Shock Test Chamber Temperature Shock Test Cabinet, Water-Cooled Two-Chamber Design Warm Chamber: The temperature control for the warm chamber ranges from +50°C to +220°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 11 K/min. Cold Chamber: The temperature control for the cold chamber ranges from -65°C to +70°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Temperature range, warm chamber: +50°C to +220°C. Temperature range, cold chamber: -80°C to +70°C. Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm. External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm. Rated power: 10 kW. Rated current: 25 A. Voltage: 3/N/PE AC 400 V +6/-10% 50 Hz. Refrigerant: R404A / R23. Weight: 1000 kg. For your safety as a buyer, please note the following information: Bdsdpfx Aiezd R Azorji The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. Refilling with refrigerants that comply with legal regulations. 3. Leak test with certificate. 4. After successful inspection, the chambers will undergo a test run, which is monitored with calibrated devices. Condition: used. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: CW-40/16 CTS Climate Chamber, Climate Testing Cell, Water-Cooled Height-adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 Test chamber approx. (W x D x H): 2500 x 2720 x 2200 Test chamber volume: 14960 liters Temperature range: -40°C to +140°C Temperature deviation 1 K over time Average temperature change rate without heat radiation, measured in the supply air Bdjdpfxjzd R A Uj Airsi Heating: 2 K/min Cooling: 1 K/min from +110 °C to -35 °C Climate tests: Temperature range: +10 °C to +90 °C Humidity range: +30% to +95% RH in the dew point range: +5°C to 89°C Temperature deviation 0.5 K over time Humidity deviation ±1 - ±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Rated power: 53.5 KW Rated current: 92.3 A Compressor: S6J-16.2 Refrigerant: R404A Weight: 5500 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Testing Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Bdjdjzd R Tgspfx Airoi Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R 452A and R 23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with refrigerants that comply with legal requirements 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Type: HT 7012 S2 Temperature shock test chamber, water-cooled Two-chamber design Warm chamber: Temperature control in the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 11 K/min Cold chamber: Temperature control in the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Temperature range, warm chamber: +50°C to +220°C Temperature range, cold chamber: -80°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power 10 kW Bodpfx Aiezd R Uwersdi Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 hours Weight: 1000 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Feutron Type: 3702/06 Water-cooled climate testing chamber Technical data: Test chamber nominal volume: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Bodpfxszd Sdme Airodi Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, RS Simulators Type: TS 150/75 Temperature test cabinet, water-cooled Temperature range: -70°C to +180°C Time deviation: ±1 K according to DIN 50011 with an empty test chamber Average heating time: approx. 3 K/min (according to DIN 50011 Part 12) Average cooling time: approx. 3 K/min (according to DIN 50011 Part 12) Test chamber dimensions: Width 530 mm x Height 530 mm x Depth 530 mm External dimensions: Width approx. 900 mm x Height approx. 1800 mm x Depth approx. 1400 mm Total power: approx. 6 kVA Current consumption: 12 A Main fuse: 3 x 16 A, slow-blow Connection voltage: 3x400V/N/PE 50Hz Bdodpfx Aiezd Sfqorsi Weight: approx. 600 kg Refrigerant: R404A / R23 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Thermotron Type: SM-8-8200 Thermotron environmental test chamber, water-cooled Working area volume: 227 liters Temperature uniformity: All models 0.7°C Temperature range: -70°C to +180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx. 400 kg Internal dimensions: Width 610 mm x Depth 610 mm x Height 610 mm External dimensions: Width 890 mm x Depth 1240 mm x Height 1850 mm Bdodpfjzd Snrex Airoi Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Heating time in minutes -65°C to 71°C: 17 Heating time in minutes -65°C to 180°C: 43 Heating time in minutes -40°C to 85°C: 16 Electrical requirements in full-load amps 230/3/60: 19 Electrical requirements in full-load amps 230/1/60: 25 Electrical requirements in full-load amps 220/1/50: 27 Cooling time in minutes 85°C to -40°C: 32 Cooling time in minutes 71°C to -65°C: 54 Cooling time in minutes 180°C to -65°C: 72 Compressor size: (2) -2 Hp Operating voltage: 400V 16.7 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, mileage: 90,000 km, power: 103 kW (140.04 HP), first registration: 03/2023, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 03/2027, color: white, emission class: euro6, loading space length: 3,600 mm, loading space width: 1,700 mm, loading space height: 1,800 mm, Equipment: ABS, air conditioning, soot filter, Used vehicle * Vehicle No.: - 22 * Euro 6, green environmental badge * Refrigerated compartment, fresh produce setting 0°C * Refrigeration unit * Reversing camera Bsdpfozk S Acjx Airjdi * Rear parking sensors * Air conditioning * Gross vehicle weight 3500 kg * Multifunction steering wheel * 3 seats * Electric windows * Central locking * Airbag * ABS * ASR * German vehicle * Original mileage ---- -> Please note: * Viewings are only possible by prior appointment. Thank you for your understanding. -> Sale is only to commercial businesses or for export. The above-mentioned data * photos and the equipment list serve only to generally identify the vehicle and do not constitute a guaranteed characteristic in the legal sense! All information / accessories are provided WITHOUT GUARANTEE. Changes * Subject to prior sale and errors! The equipment list does not form part of the contract and must be checked in detail by each interested party on site at the vehicle before the purchase is finalized. Subsequent complaints will not be accepted.

Condition: used, Vötsch Type: VTS 7011-5 Bodpfx Aiszg Tpcsrsdi Heraeus Vötsch temperature control chamber, water-cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.3 to 1 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate (cooling): 6 K/min Temperature change rate (heating): 10 K/min Refrigerant: R-404A / R 23 Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 7.5 kW Rated current: 13 A Weight: 360 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm Bdsdpfx Aiezg Tpijrji The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Vötsch Bdsdpozg Tp Nofx Airei Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, TIRA Type: Walk-in climate simulation chamber TTZ 4008 S(m) Technical data: Temperature range: -40 to +120 °C Temperature tolerance: +/- 1.0 °C Temperature change rate: 1 K/min Humidity range: 10 to approx. 95% RH Humidity tolerance: +/- 5.0% RH Dimensions: Test chamber volume: 8 m³ External dimensions (W x D x H): approx. 2410 mm x 3920 mm x 2530 mm Test chamber (W x D x H): approx. 2002 mm x 2148 mm x 2005 mm Door opening (W x H): approx. 2002 mm x 2005 mm Condition: used Scope of delivery: (See image) Bjdpezg Twmofx Airedi (Subject to change and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, RS Simulators Type: Walk-in climate simulation chamber KKC 22/45 Water-cooled Technical data: Temperature range: -40 to +120 °C Temperature tolerance: +/- 1.5 °C Temperature change rate: 1 K/min Humidity range: 10 to approx. 95% RH Humidity tolerance: +/- 5.0% RH Dimensions: Bdjdpfx Aijzg Txdjrji Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, CTS Type: T-70/600/S Water-cooled temperature testing chamber Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for external control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Bdsdpfx Ajzg Ty Ijirji Heat radiation approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Refrigerant: R404A / R23 Weight approx. 700 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.