Used Frame Assembly Machine for sale (70,034)

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Cpodpeh U Dtusfx Afpou Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: excellent (used), Year of construction: 2008, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 294144, Our SMD assembly line consists of top-tier brands. It's in mint condition, hasn't performed any work except for periodic on-off operations. You can Cjdpfx Afow H Tuaepjpu have it serviced as needed. It's a complete package, with not a single scratch. Our production line can assemble all electronic boards. This product is a perfect opportunity for those looking to start a new business.

Condition: new, Year of construction: 2026, functionality: fully functional, Retractor EV Pneumatico with Automatic Cable Retractor / Charging Cable Holder The Pneumatico Retractor EV is an innovative holder with automatic cable retraction, revolutionizing the charging process for electric vehicles. This device not only makes charging the vehicle easier but also tidies up cable management effortlessly. The retraction unit is available in four models with different load capacities: EV0, EV1, EV2, EV3. What is the Pneumatico Retractor EV used for? The Retractor EV is designed for the management of electric vehicle charging cables. The housing is made of galvanized steel, making it weather-resistant. It features a 180-degree rotating mount that facilitates easy and convenient cable handling. The modern design and powder coating provide a high-quality, aesthetic finish. The extended cable is up to 300 cm long and manufactured from special, high-strength Dyneema fibers that do not damage vehicle bodywork. At the end of the cable, there is a rotating handle to prevent cable twisting. The retraction force can be adjusted using a wrench. Installation of the retraction unit is simple and quick. The suspended cable remains clean, as do the operator's hands. Lifting capacities range from 1.00 kg to 8.00 kg depending on the selected version. Does the Pneumatico EV Retractor fit every charging cable? Yes. The basic clamping range for cable diameters is from 16.5 to 32 mm, and the load capacity of the retractor ranges from 1.00 to 8.00 kg. If the cable diameter differs, we supply a custom cable holder with the required diameter and use a retractor with a higher load capacity. The Pneumatico Retractor EV is the ideal device for both private and commercial use. Pneumatico Cable Retractors – EV Series (EV0 / EV1 / EV2 / EV3) We offer Pneumatico spring-cable retractors in various load capacity ranges – ideal for industrial applications such as cable management and tool balancing. Csdpfx Ajygv Dkofpopu Load capacities / Models: EV0: 1–2.5 kg EV1: 2–4 kg EV2: 4–6 kg EV3: 6–8 kg Cable diameters (available for all EV models): 16.5–18.5 mm 19–20 mm 21–22 mm 22.5–24 mm 24.5–26 mm 26.5–28 mm 28.5–30 mm 30.5–32 mm

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Especially designed for stair construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drillings, such as for balusters, can be easily accomplished with the swiveling drilling unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Equipped with Röhm two-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can swivel 65 degrees left and right Pneumatic adjustment of working height allows dowelling on two levels without repositioning. Desired drilling heights can be set for each drilling level via digital counter, switching between levels is pneumatic and operated from the front Cross adjustment 340 mm, infinitely variable or in 12 mm increments via indexing rail Pneumatic clamping possible at any point, operated from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swiveling workpiece supports Extraction funnel Cpsdpsxmatnefx Afpeu Central stop + 1 side stop Fixed mitre stop Length stop as round rod Assorted drill bits Operating manual CE mark Machine was partly repainted due to paint splashes. Pneumatic hoses replaced Dimensions: approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be viewed and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Codpfjk S Htxex Afpspu Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: like new (used), Year of construction: 2022, A Manz hot press is for sale. It is disassembled and stored in our warehouse, and can be inspected ready for connection. It was used in aircraft manufacturing. Cjdpfx Afjyhq Adepepu

Year of construction: 1994, condition: used, Used machine Year of manufacture: 1994 Equipment and technical specifications: Working width: 300 mm Sanding belt oscillation: mechanical Roller guide: rubber-coated Sanding unit: with sanding shoe Feed speed: 2-stage Feed direction: reversible (forward/reverse) Motor start: star-delta Power supply: 380 V Weight: approx. 450 kg Availability: short-term Location: Baden-Württemberg Cpsdpjxq Ua Rofx Afpju

Condition: used, New hose assembly machine DAEWOO model DA5100-HC Hydraulic hose crimper, workshop hose crimper For crimping hose fittings Serial number: 25DW05950ALE01 Year of manufacture: 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump delivery rate: 6 L/min Operating capacity: 200 units/hour Hydraulic pressure: 315 bar Motor power: 3 kW Power supply: 400 Volt, 50 Hz - 2 operating modes: manual and automatic - Operation via push button or foot switch - Crimp travel setting via knurled screw - Short changeover times for different hose diameters; jaws are simply slid into guides and held in place magnetically - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement (L x W x H): 700 x 500 x 1250 mm Csdox Srwfspfx Afpopu Weight: 270 kg New - unused

Year of construction: 1992, condition: used, Technical details: voltage: 380 V/Hz sizes from - to: Ø 6 bis Ø 50 mm total power requirement: 1,5 kW weight of the machine approx.: 293 kg Cpjdpfx Afsvc Atgopju dimensions of machine: 690 x 380 x 1150 mm Application: Assembly of hose lines Process: pressure-controlled pressing with assembly tools Hydraulics 240 bar overpressure, capacity/capacity for 20 liters Electro-hydraulic drive Operation ON/OFF switch and foot control Machine is currently equipped with jaw set DN 12 16 (code 220) Further jaw inserts available: DN 6 - 10 (code 215) DN 20 - 25 (code 230) DN 32 (code 240) DN 40 (code 245) DN 50 (code 260) without code: DN 21; DN 22; DN 33; DN 34; DN 35; DN 37; DN 39 *

Condition: used, Year of construction: 2010, The machine has recently undergone service. Cpsdpfxjx Tv Rxe Afpsu Machine may need following repairs: A damaged guide rail clamping the PCB was observed. Transport belts are in poor condition. Mirrors in the camera module need to be cleaned before calibration. Software version Si 8.60 may require an update. Otherwise it is operational.

Condition: used, Year of construction: 2000, input voltage: 400 V, * Manufacturer: LÖWER * Machine No.: 10068 * Year of manufacture: 2000 * Type: KFM (see manufacturer's brochure) * Weight: 220 kg Cpedeydm A Ejpfx Afpou * Full load current: 18 A * Connection: 3~ three-phase, 400 V, 50 Hz * Protection: on-site protection 25 A The machine was used in our production facility until the end of operations, always running reliably and without issues. The balls have been replaced. The machine is ready for use and shows minimal signs of wear. Technical specifications can be found in the attached PDF. Collection from 41334 Nettetal.

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, Wet sharpening machine for Frame Saws Cpjdpfxjx Uwzbe Afpju

Condition: like new (used), Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, input voltage: 220 V, control voltage: 220 V, Equipment: CE marking, High precision, adjustable full automatic oral bottle filling sealing machine . Cpodpjxl Edcjfx Afpeu

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Cjdpfx Afjxdttispopu - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: used, Year of construction: 1989, functionality: fully functional, Stegherr Type FD, a boring machine for dowel holes in window frames — designed for precise drilling of dowel holes in wooden window profiles. Professional FP machine for milling, drilling, and processing of wooden frames, windows, and doors. Very robust German quality Suitable for precision work (corner joints, dowel holes, etc.) Cpsdpfx Afeya Alzepsu Convenient stops and adjustment options Fully operational. Sturdy metal housing Ideal for joinery workshops or woodworkers seeking accurate results. In used condition.

Year of construction: 1977, condition: ready for operation (used), Two identical single wood belt sanding machines Löwer are available. Sanding belt length: 1600mm, sanding belt width: 160mm, working width: 150mm, feed rate: 16m/min, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 1400mm/1000mm/1600mm, weight: approx. 650kg. On-site inspection is possible. Cedpfox U Dw Aex Afpjpu

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Cpedpfx Afjpl D Hxjpju Tyop GA 250

Condition: used, Year of construction: 1959, functionality: fully functional, Sharpening machine for sharpening frame saw blades. Inspection possible. Cjdpfex Tak Nox Afpjpu

Condition: used, Frame sanding machine LÖWER RSM 280 SX -used- Frame sanding machine sanding pad, oscillation, frame sanding device, feed belt, Cpjdpfx Afeu R Tbhspju belt cleaning ----- Technical data ----- Sanding width: 190 mm, max. workpiece thickness: 120 mm, Speeds: 6,11,16 m/min, Motor: 5.5 kW, weight: 550 kg

Year of construction: 1997, condition: used, MACHINE FOR FRAME 45 GRADIUS WITH GLUE SYSTEM AUTOMAT Cpsdpfx Asdbycaefpou

Condition: excellent (used), Here we offer you a TOX press-in machine TOX-C-frame press. TOX Pressotechnik Press-in machine TOX-C-frame press Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type EMB 030.068.Α.001 Drive KWE3O.0O.17O.10H Pneumatic connection G3/4'' Compressed air preparation filtered and dried compressed air max. particle size 40 µm Air pressure working process Pmin. = 3,0 bar Рmах. = 6,0 bar Pressing force 170 kN Total stroke / scraper stroke 170 mm/ 10 mm Control STE 326-366-3/4"-90-230٧/АС special cpl. Electrical connection 90-230V/AC Ambient temperature operation Тmiп. = 10°C Tmax. = 60°C Tox press-in monitoring EPW 500FP Force / displacement measurement Holding-up device ZHE for Tox press Insertion dimensions: Width 1917.5 mm Height 2506 mm Depth 1917.5 mm Protective grid circuit Leuze B20/B21 Light curtain Press-in tool see (pictures 15 to 18) Press-in sleeve (Fig. 17) 24.5 ∅ mm Range of application, use Press-fit Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you. Cpodpfx Ajhhil Tsfpeu

Condition: used, Year of construction: 2015, operating hours: 35,052 h, Operational machine! Modular Type Multi - Purpose Automated Fabrication Machine sFAB50. Hours worked: 35052 The component feeders: Radial tape feeder pitch 12,7 mm - 3 pcs. Horizontal stacked stick feeder - 1 pc. The ball screw of X-axis may need to be replaced in the near future. Ask for specifications! Cpjdpfxjx Nh Rpj Afpsu

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 3,900 kg, total length: 6,200 mm, total width: 1,200 mm, total height: 2,300 mm, motor manufacturer: Bitzer, power: 240 kW (326.31 HP), New Advansor Cubig 2 4x4 installation. Central CO2 refrigeration and freezing system. Codpfx Afsw R U Nmopepu Equipped with Bitzer compressors and Alfa Laval plate heat exchanger for heat recovery. Cooling capacity: 105 kW at -8°C Freezing capacity: 90 kW at -48°C Complete set including condensers (gas coolers) and an additional plate heat exchanger for heat recovery. Fully pre-wired control panel with Danfoss control equipment. Eco gas cooler and Alfa Laval plate heat exchanger. Top brand – Danish quality. Including documentation, diagrams, and accessories.

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: - 2-jaw drill chuck for up to 20 mm shank diameter - Pneumatic position adjustment on 2 levels, 0-100 mm - Max. drilling depth 150 mm - Precision indexing rail 12 mm - Central locking and cross adjustment Cpedpfx Aowkba Hofpou - 2 pneumatic safety clamping cylinders - Motor 1.5 kW - Speed 2800 rpm Dimensions (without stop): 1100 x 1100 x 1500 mm Weight: approx. 310 kg Availability: short-term Storage location: Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Codsw I Uy Tepfx Afpopu Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach