Used C60 for sale (327)

Condition: used, Year of construction: 2014, operating hours: 80,000 h, functionality: fully functional, overall weight: 10,000 kg, power: 350 kW (475.87 HP), fuel type: electric, volume flow: 3,180 m³/h, operating pressure: 8 bar, pressure (max.): 8.5 bar, type of cooling: water, Equipment: documentation/manual, type plate available, Operational frequency-controlled turbo compressor up to 53,000 liters per minute Itsdpfx Aasw N Hdyoben

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2100x1250x1750 mm weight 700 kg Iodsv Dmq Sjpfx Aabstn total power requirement 8,5 kw

Condition: excellent (used), Here we offer a vacuum pump. Weight: 125kg Oerlikon Leybold SCROLLVAC SC 60 D Pumping speed (50 Hz): 60 m³/h Pumping speed (60 Hz): 72 m³/h Oil-free Iedpfxsqa Dbvo Aabstn High effective pumping speed Low final pressure Low-vibration operation Type: SC60D Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 2008, DMG DMC 60 T RS3 Universal 5-Axis Machining Center • Manufacturer: DMG • Model: DMC 60 T RS3 • Machine No.: 1143 000250 3 • Year of Manufacture: 2008 • Control: HEIDENHAIN MillPlus IT • Condition: o Power-On Hours: 42,603 o Spindle Hours: 20,137 Travel Range: • X: 780 mm • Y: 560 mm • Z: 560 mm Specifications: • Spindle Speed: 12,000 rpm • 60-Position Tool Changer – SK 40 • NC Rotary Table with Pallet Carrier • NC Swiveling Milling Head (B-axis) Itsdowp T Nwspfx Aabon • Rotary Pallet Changer • RS3 Pallet Carousel for 4 Pallets (630 x 500 mm) • Total of 5 Pallets • BLUM Laser • BA 4 • 3D Touch Probe TS641 • Air Blast • Chip Conveyor • Through-Spindle Coolant (IKZ) 40 bar • Coolant Tank: 900 Liters • ROTOclear

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, 5-axis machining center with rotary table (C) and tilting head (B) The machine comes from a large operation and was maintained preventively. TECHNICAL DETAILS Travel X: 760 mm Travel Y: 560 mm Travel Z: 560 mm Control: 840 D Powerline Siemens Tool holder: SK 40 Number of tool magazine positions: 60 Spindle speed: 0–12,000 rpm Pallet size: 630 x 500 mm Feed rate: 20–15,000 mm/min Rapid traverse: 50 m/min MACHINE DETAILS Total connected load: 64.2 kVA Total power requirement: 26 kW Machine weight: 12 t Space requirements: 5.2 x 4.5 x 2.45 m Spindle hours: 20,844 h Operating hours: 58,437 h Dimensions and Weight Machine body length: 3,450 x 2,400 x 2,650 mm Machine body weight: approx. 6.50 t Tool magazine length: 2,600 x 1,000 x 2,000 mm Tool magazine weight: approx. 0.50 t Cooling unit length: 1,850 x 1,750 x 1,500 mm Itsdpfx Aajwvitxobon Cooling unit weight: approx. 0.50 t Chip conveyor length: 3,200 x 1,000 x 1,700 mm Chip conveyor weight: approx. 0.50 t EQUIPMENT - Pallet changer with 2 pallets - Tool changer with 60 positions

Condition: used, Year of construction: 1999, Technical details: x-travel: 600 mm y-travel: 450 mm Itodpet Rmffjfx Aaben z-travel: 450 mm total power requirement: 35 kW weight of the machine ca.: 6,5 t table-size: 600 x 370 mm tool taper: ISO 40 tool diameter: 80 mm tool length - max.: 250 mm no. of tools in magazin: 30 speeds: 12.000 U/min feed power: 6000 N kp power capacity: 9,0 kW 5-Axis CNC Milling Machine Spindle: 15113h *

Condition: excellent (used), Year of construction: 2020, operating hours: 900 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 530 mm, workpiece weight (max.): 500 kg, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 130 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, MAZAK Variaxis C600 – Vertical Machining Center TECHNICAL CHARACTERISTICS: Number of simultaneous axes: 5 Stroke X axis: 650 [mm] Stroke Y axis: 550 [mm] Stroke Z axis: 530 [mm] Feed rate on X, Y and Z axes: 42000 [mm/min] Min. distance spindle nose / table: 50 [mm] Max. distance spindle nose / table: 580 [mm] Table dimensions: Ø600 x 500 [mm] Max. load on table: 500 [Kg] Stroke C axis : table revolution: 360 [°] B axis swivelling stroke: -30 [°] / +120 [°] Spindle type: BT40 Max. spindle speed: 12000 [rpm] Spindle power: 11 [kW] Tool changer magazin number of stations: 60 Max. tool length: 300 [mm] Max. weight of single tool: 8 [Kg] Max. tool diameter: 80 - 130 [mm] Total power required: 46.7 [kVA] Supply voltage : 400 [V] Machine dimensions : 2350 x 2962 x 3039 [mm] Layout dimensions : 5010 x 2470 [mm] Weight: 10000 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW part probe type RMP600 x1 RENISHAW tool probe type PRIMO LTS x1 RENISHAW calibration sphere Itodpfjwv T I Hex Aaben x1 electronic handwheel x1 chip conveyor x1 high-pressure pump 15 [bar] Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling machines, drill and tap machines, and CNC grinding machines.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2300x1250x1750 mm weight 800 kg Itodpfx Aov Dmrvoaben total power requirement 8,5 kw

Condition: excellent (used), Kärcher Type: PC 60/130 T / with oil separator (skimmer) attachment kit Kärcher parts cleaner Manufacturing, maintenance, workshops, metal processing - automatic parts cleaners have many applications. The parts cleaners work on the basis of aqueous solutions without solvents. The top loader PC 60/130 T is a fully automatic parts cleaner for parts up to 600 mm in diameter, 310 mm in height and 130 kg maximum weight. The items to be washed are cleaned using three-dimensionally arranged flat jet nozzles using solvent-free, heated Kärcher water-based cleaning agents. The items to be washed rotate on an electrically driven rotating basket during cleaning. The Parts Cleaner PC 60/130 T offers numerous practical details such as an integrated small parts drawer that reliably catches loose parts and coarse dirt particles. Equipment: Operating hour meter Holding ring (stainless steel for turntable) Swivel castors, 2 lockable Timer for cleaning cycle Water level control Itodpfx Asfu Ikweabon Oil separator (skimmer) attachment kit See Figure 7 The oil separator (skimmer) extends the service life of the cleaning solution considerably. If the cleaning solution has settled, for example overnight, the oil that has been added floats to the top. The skimmer can now be switched on to remove this oil from the cleaning solution. Specifications Technical data: Pressure (bar/MPa) 1.5 / 0.15 Flow rate (l/h) 4500 Connected load (kW) 5.5 Working diameter (mm) 600 Usable height (mm) 310 Housing / frame stainless steel (1.4301) Tested (by) according to CE Heating power (kW) 4.5 Max. temperature (°C) 80 Adjustable cleaning time (min) 1 / 30 Payload (kg) 130 Sound pressure level (dB(A)) 65 Tank capacity (l) 100 Number of current phases (Ph) 3 Frequency (Hz) 50 Voltage (V) 400 Dimensions (D x W x H) (mm) 1080 x 1000 x 1250 Very few operating hours as can be seen in the photo. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Ultrasonic cleaning device Glogar Ultrasonic 600H Tank capacity max.: 58 litres Basket dimensions (usable): 400 x 255 x 220h mm Internal tank dimensions: 500 x 330 x 350h mm Outer dimensions of the unit: 670 x 580 x 936h mm Ultrasonic frequency: 25 / 45 kHz (switchable) Ultrasonic power eff./max.: 900 / 3.600 Watt Heating power: 2.800 Watt Sweep: yes Pulse: yes Degas / Autodegas: yes Drain/diameter: 3/4 basket load: 25 kg Included in delivery is 1 stainless steel basket and 1 noise protection lid. Delivery ex works (FCA), AT-4490 St. Florian b. Linz Ijdpfx Aaofk Tt Isbjtn Device is produced in Germany! OTHER DEVICE DIMENSIONS AND DESIGNS ON REQUEST.

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of axis 5 Media Chip conveyor Yes This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information. Ijdjwmg T Dspfx Aabstn Application Types Milling

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 600 kg, swivel angle C-axis (max.): 360 °, Equipment: documentation/manual, TECHNICAL DETAILS X-axis: 600 mm Iodpfxswtq S Rj Aabotn Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° Control: Siemens Number of pallets: 2 Pallet size: 400x500 mm Permissible pallet load: 600 kg MACHINE DETAILS Weight: 10,500 kg

Condition: good (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, controller manufacturer: Heidenhain, controller model: Mill Plus, table length: 700 mm, spindle speed (max.): 12,000 rpm, 60 tool places. 2-fold pallet change. IKZ spindle with 12000 rpm, 40 bar Itedju S A Anopfx Aabjn Operating mode 4 for working with open door. Blum laser, with tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe is not included in the scope of delivery.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: Iedpjviwdmjfx Aabetn The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Here we offer station a Pfeiffer vacuum pumps. Pfeiffer vacuum pump WKP 500 A MOD PP W31 928 / X 2161 n: 2800 1/min oil: P 3 1.5 l S(N2): Theor 500 m³/h Weight: 125kg Engine type: EELQ-8T Oerlikon LEYBOLD SCROLLVAC SC 60 D Discharge pressure: 0.01 mbar Engine: 3-ph, 200/400 V, 50/60 Hz Pumping speed (50 Hz): 52 m ³/h Pumping speed (60 Hz): 62 m ³/h Itedjd H Anijpfx Aabon Oil-free High effective pumping capacity Low ultimate pressure Vibration low operating Type: WOD 410 B Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: used, Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 2.0122, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, However, it takes a certain amount of time after disconnecting the power before it works correctly again. Ijdou Iufpepfx Aabotn

Condition: new, Year of construction: 2025, Yanigav Circular Saw SC600E / SC600M • Drive: Electric single-phase motor 3.1kW / Gasoline engine • Saw blade diameter: 60cm / 60cm Isdpfx Aor D Nkpjabotn • Saw blade bore: 30mm • Tooth depth: 28cm / 28cm • Rotation: 1450 rpm • Weight: 90kg / 100kg Price: €1395 / €1615

Condition: used, Year of construction: 2011, Canon imagePRESS C6010VP Digital Press Due to the arrival of a new machine, we are offering Canon imagePRESS C6010VP for sale. The machine is in working condition. Iodpfx Aaowqxc Ejbjtn Regularly maintained by Canon service. Ideal for high-quality digital printing

Condition: excellent (used), Year of construction: 2018, Very well maintained Quinto 603. Multiple machines of this type are available. Itedjw Exytjpfx Aabjn

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, The machine was originally built in 1996. Originally overhauled by the manufacturer in 2011 for approximately €250,000: electrical and mechanical components completely renewed. TECHNICAL DETAILS Pipe diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Pipe length: 1,500 mm Bending angle: max. 180° + springback Pipe length: 400 - 1,500 mm Pipe outer diameter: 28 mm - 60 mm Material parameters Tensile strength of stainless steel: max. 750 N/mm² Tensile strength of mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Travel movements Bending direction: left Bending speed (forward travel): max. 22.0 rpm (infinitely adjustable) Bending speed (reverse travel): constant 22.0 1/min Twisting angle: max. 360° Twisting speed: 50 rpm Height adjustment for multiple radii: lowest tube center 55 mm Itsdswlpt Dspfx Aabsn Height travel: suitable for 3-groove bending tools MACHINE DETAILS Stop time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control panel (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic filling volume: 340 l Control system Bending levels: up to 6 (CNC-programmable) Positioning device: NTB version Control unit: Schwarze-Robitec operating and control panel EQUIPMENT - Automatic cold pipe bending machine - Pipe positioning device - Gripper - Schwarze-Robitec pipe magazine - Hydraulic operation for bending table, tool clamping, slide rail, mandrel retraction, reinforced slide rail feed and retraction - Various bending tools for Ø 60 mm pipe - Various auxiliary tools - Cooling unit for control cabinet - Foot control (2-way) - Schwarze-Robitec control panel - Cooling unit for control cabinet Rittal type SK 3361100 Note: Due to a lack of operating knowledge, the machine could only be tested in setup mode. No errors are known.

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Power: Laser 2000 W Maximum sheet thickness 8mm Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Itjdpem Ak Huofx Aabsn Speeds: X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), - Bundle packer for shrink films - Dimensions 1780 x 1480 x 2105 mm (L x W x H) - Working width 500 mm, good condition ready for use - Wide range of use, comes from current production - Connected loads 380V, 10A, 50Hz, 5kW Iedpsr Ndi Iofx Aabstn - Price 1.500,00 €

Condition: used, Year of construction: 2012, x-travel 630 mm y-travel 800 mm z-travel 750 mm control SIN 840D sl Siemens B - axis 360 x 0,001 ° A - axis -200 -- +25 x 0,001 ° spindle turning speed - stepless 20 - 18.000 U/min power capacity at 100 % load 28,00 kW power capacity at 40 % load 34,00 KW max. torque at 40% / 100% load 110 / 84 Nm tool taper HSK 63 feed X/Y/Z/-axis 1 - 100.000 mm/min rapid traverse X/Y/Z 100,00 m/min feed capacity X/Y/Z 9 / 6 / 9 kN feed B-axis 1 - 14.400 °/min Itsdpfovxwxvsx Aabon feed A-axis 1 - 7.200 °/min size of pallet 2x 500 x 500 mm workpiece weight max. 400 kg max. workpiece diameter 800 mm workpiece height max. 800 mm tool magacine with 63 diameter of tools max. 280 mm tool length - max. 550 mm weight of tools max. 15,00 kg total power requirement 65,00 kW weight of the machine ca. 14,00 t dimensions of the machine ca. 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage control, emulsion mist separator, without chip conveyor and without coolant system.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, bending angle (max.): 75 °, input voltage: 380 V, overall weight: 1,000 kg, rotational speed (min.): 15 rpm, working height: 850 mm, TECHNICAL DETAILS Max. bending angle: 75° Bending angle options: 40° / 60° / 75° Single and double bending of reinforcing steel: possible Number of bending forms: 2 pieces Bar size Angle form: Ø 12 - 50 mm Double angle: Ø 12 - 35 mm Bending plate Diameter: Ø 480 mm Speed: 7.5 / 15 rpm Bending pin hole: Ø 48 mm (16 pieces) Center pin: Ø 50 x 94 mm Itodpfx Aovyhihsabsn Counterholding strips Number: 2 pieces Length: 840 mm Displacement: per handrail 100 mm Holes: 13 pieces, Ø 48 mm MACHINE DETAILS Dimensions (L x W x H): approx. 1.9 x 2.6 x 1.0 m Transport dimensions (L x W x H): 2.6 x 1.8 x 1.0 m Working height: 850 mm Operating voltage: 380 V Machine weight: approx. 1.0 t EQUIPMENT - Control panel with touch screen - Bending attachments: 2x Ø 60 mm 2x Ø 78 mm 1x Ø 96 mm 1x Ø 122 mm 1x Ø 160 mm 1x Ø 200 mm - 1x pin for plate - 8x counterholders of various shapes - Bending tray

Condition: good (used), Julabo Type: FC 600 Technical data for FC 600 Dimensions (W × D × H) 36 x 54 x 49 cm Weight 48 kg Temperature values: Working temperature range -20 ... +80°C Temperature stability ±0.2°C Mains voltage 230V/50Hz 7 A Power values: Heating output 1.2 kW Cooling capacity 20°C 0.6 kW, 0°C 0.34 kW, -10°C 0.21 kW Refrigerant R134a Global warming potential 1430 Filling weight 290 g Pump capacity Flow rate 20 l/min Iodpfxsry Uifs Aabetn Pump capacity Delivery pressure 0.5 bar Filling volume 6 to 8 l Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.