Used Cabinets for sale (3,957)

Condition: used, Year of construction: 2020, Overview Compact bottling line for craft beer, built in 2020 by CDA (Chabot Delrieu Associés, France). The B-HOP monobloc labels, fills and caps glass bottles in one stainless-steel frame, fed by a rotary infeed table and discharging onto an outfeed table. Delivered with format parts for 75 cl bottles and additional tooling for 33 cl long-neck bottles; both formats are capped with 26 mm crown caps. Output up to 700 bottles/h. The line has been dismantled and is stored ready for transport. Technical data Bodpfo Afkq Ejx Aa Eslp - Year of manufacture: 2020 - Output: up to 700 bottles/h - Product: beer - Containers: glass bottles, 75 cl and 33 cl long neck - Functions: labelling, filling, capping - Capping: crown cap 26 mm, for both the 75 cl and the 33 cl format - Electrical supply: 220 V / 16 A, 2 kW - Compressed air: max. 28 m³/h at constant 6 bar, compressor tank 200 L - Product inlet: DN40 Macon male connection at the pump inlet - Footprint: approx. 4,118 x 2,427 mm, plus door and cabinet clearance (approx. 3,254 mm deep) - Height: approx. 2,450 mm; conveyor height approx. 925 mm - Control: touchscreen HMI Scope of Delivery - Labelling, filling and capping monobloc | CDA | B-HOP | 2020 - Rotary infeed table | CDA | diameter 1,000 mm, standalone | 2020 - Outfeed table | CDA | 2020 - Format parts for 75 cl bottles - Additional tooling for 33 cl long-neck bottles, including fixed-plate roller Condition Dismantled and stored. Inspection by appointment. Availability Available immediately. Location: France.

Condition: ready for operation (used), functionality: fully functional, A complete Bühler core wheat flour milling plant with a production capacity of 200 tonnes per day is offered for sale as a relocation project in Hungary. The mill remained in commercial production until 2025 and underwent a major refurbishment in 2020. The complete process line is available, including mechanical equipment, electrical systems, PLC automation and supporting steel structures. Includes the following: Wheat Cleaning Roller Mills Plansifters Purifiers Pneumatic Conveying Electrical Cabinets PLC Automation Motors & VFDs Steel Structures Process Piping Laboratory Equipment Dismantler capacity (Italpack) 3 t/hour Bagger capacity 12 t/hour DOCUMENTATION The offer includes the complete milling technology as shown on site, including all mechanical and electrical equipment, steel structures, piping and ancillary systems required for full operation. If this opportunity is of interest to your company, I would be pleased to provide: Complete equipment list Blodpfxs Afmlxe Aa Eep Additional photographs and videos Technical documentation Commercial proposal Information regarding dismantling and export logistics

Condition: used, mileage: 2,03,359 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, emission class: euro6, Year of manufacture: 2021 Field of application: Freight transport Engine capacity: 1.950 cc General condition: poor Technical condition: poor Visual appearance: poor Production country: DE Please contact Christian Theißen for more information Manufacturer: Mercedes Benz Model: Vito 4x4 Emergency doctor vehicle Year of build: 2021 Condition: Used Data: First registration: 07.12.2021 Mileage: 203.359 KM Fuel type: Diesel Gear type: Automatik Drive type: All-Wheel Drive Engine power/displacement: 140 kW / 1.950 cm³ Colour: Color: White with vinyl decals Bjdpj Ad Dzbsfx Aa Ejlp Seats: 3 Environment badge: Green / Euro 6 Total permissible weight: 3.200 kg Equipment: Airbag, ABS, ESP, power windows and side mirrors, automatic climate control, radio, power steering, daytime running lights, central locking. Information: In accordance with DIN 75059: pressure-chamber loudspeaker, Martin system, LED signaling system, accident data recorder, hands-free cell phone kit, doctor's seat, work table, heated compartment, refrigerated compartment, cabinet in the rear section. Additional Information: Transmission damage; defective tailgate; cannot be opened. Price on demand Location: 41468 Neuss: immediately available

Condition: used, Year of construction: 2013, Overview This Cermex F38741, built in 2013, is an automatic cardboard case erector that forms shipping cases from flat blanks for an end-of-line packaging setup. Blanks are taken from the magazine, erected, the bottom flaps are folded and closed, and the open case is discharged on the outfeed rails to the downstream packer. The machine comes from a wine packaging operation and has been dismantled and stored. Technical data - Manufacturer: Cermex - Model: F38741 - Year of manufacture: 2013 Bjdpfx Aaj Afdr Nj Eolp - Machine type: automatic cardboard case erector - Output: up to 40 cases per minute - Power supply: 400 V, 50 Hz, 3P+N+PE, 23 A full load - Control: Siemens SIMATIC S7-200 PLC (CPU 224) Equipment - Blank magazine with infeed chain and lugs - Erecting station with pick-up head on a cable-chain carriage - Bottom flap folding and closing section - Outfeed rails for the erected cases - Enclosure with transparent safety doors and signal tower - Separate control cabinet with Siemens operator panel, emergency stop and control transformer - CE marked Condition Dismantled and stored. An inspection is possible. Availability Available immediately. Location: France.

Condition: used, Year of construction: 2004, Overview Isobarometric filler built in 2004 by the Italian manufacturer CIMEC, with 8 filling valves. The machine filled carbonated lemonade into glass bottles: 1,300 bottles/h in 33 cl and 750 bottles/h in 75 cl. Last production in 2022. The filler has been dismantled and is stored ready for shipment. Technical data - Year of manufacture: 2004 - Filling system: isobarometric (counter-pressure), 8 filling valves - Output: 1,300 bottles/h (33 cl), 750 bottles/h (75 cl) - Product: carbonated soft drinks (lemonade) - Containers: glass bottles, 330 ml and 750 ml - Electrical supply: 400 V / 50 Hz, 3 kW - Compressed air: 6 to 7 bar, max. 120 Nl/min - Dimensions: approx. 1,600 x 1,400 x 2,400 mm (L x W x H) - Control: push-button panel with text display Equipment Bodpfo Afd Htox Aa Eslp - Stainless-steel frame with transparent safety guarding - Electrical cabinet - Enerfluid side-channel blower - Pall filter housings - Conveyor section Condition Dismantled and stored, ready for shipment. Inspection by appointment. Availability Available immediately. Location: France.

Condition: excellent (used), The BIBO TC84, a professional Italian edge coating machine, is designed for coating both sides of leather and finishing edges. This machine is used in the production of belts, straps, bags, wallets, and other leather goods that require aesthetically pleasing edge finishing. The device allows for the even application of coating to the edges of the material, significantly speeding up the production process and ensuring high consistency in the finished product. Technical data: Manufacturer: BIBO Model: TC84 Country of origin: Italy Power supply: 380 V 50 Hz Two-sided edge coating Adjustable operating parameters Adjustable material guide Stable steel construction Cabinet/base included Applications: Bsdpfez Sm Sujx Aa Eolp leather belts straps handbags wallets leather goods leather products Condition: Used machine. Visual condition as shown in the photos.

Condition: used, Year of construction: 2014, operating hours: 10,000 h, machine/vehicle number: LC696, Used TM INOX brewery line 70 hl - Year 2014Technical Specifications & Performance DataThis second hand brewery processing line is configured for beer production, covering key stages from brewhouse operations and yeast handling through fermentation, filtration, cooling, utilities and laboratory control. The equipment inventory combines components manufactured between 2004 and 2014, with a main electrical cabinet dated 2012 and fermentation control equipment dated 2013.Brewhouse vessels: two 3.5 m3 mash boiling tanks, a 7.8 m3 malt filter tank, a 7 m3 hop boiling tank, a 7.2 m3 buffer tank and a 7.5 m3 whirlpool tankYeast section: 2.1 m3 yeast tank and 1.5 m3 sterile tankUtility capacity: steam generator rated at 1,500 kg/hFiltration: kieselguhr filter, sterile filtration unit and beer flow meteringAdvanced Automation & Control SystemsThe brewery includes dedicated electrical and control infrastructure for coordinated process management. A main brewery electrical cabinet, brewhouse command panel with software, pneumatic valve control board, pump control cabinet and mixer motor cabinet support automated process functions. Fermentation is supported by a dedicated command cabinet with software, while K&P heat control electronics manage thermal process control.This arrangement is suitable for industrial packaging and beverage production environments where stable control of pumps, valves, heating and cooling functions is essential to repeatable beer processing.Production Line Integration CapabilitiesThe installation is arranged as an integrated brewery process plant rather than a bottle filling and packaging line. It supports the upstream preparation of beer prior to transfer to compatible downstream bottling, canning or kegging equipment. Process pumps, stainless steel piping, steam distribution and glycol installation provide the essential connections between brewing, fermentation, filtration and cooling stages.Machine TypeManufacturer / ModelYearVarious EquipmentVELO yeast mill2004TankTM INOX hot water tank, 10 m32014TankMash boiling tanks, 3.5 m32004FilterTM INOX malt filter tank, 7.8 m32014TankTM INOX hop boiling tank, 7 m32014TankTM INOX buffer tank, 7.2 m32014 Bjdpfxe Adtqfo Aa Ejlp

Condition: used, Year of construction: 2013, machine/vehicle number: ET238, Used KRONES labeller machine - 2013Technical Specifications & Performance DataThis Krones rotary labeling machine is engineered for high-speed wrap-around labeling with OPP film using hot melt adhesive. Built in 2013, it is suitable for modern beverage production and industrial packaging lines, offering dependable performance for second hand and used bottling line applications.Manufacturer: KronesModel: AC 3/N/PEYear: 2013Maximum speed: 25,000 bphMachine type: Rotary labeling machineLabel type: OPP roll-fed wrap-aroundAdhesive: Hot glueNumber of plates: 15Machine pitch: 111 mmLabel reels: 2 reels, max roll diameter Ø 500 mmLabel magazines: 2Container material: PETCurrent bottle format: 0.5LWorking height: 1200 mmElectrical data: 400 V, 3 PH + N, 50 Hz; full-load current 23 A; pre-fuse 35 A; enclosure rating IP54Compressed air: 7 barApprox. overall length: 3800 mmHMI: KronesPLC: SiemensAdvanced Automation & Control SystemsThe machine integrates a Krones HMI for intuitive operation and recipe management, coupled with a Siemens PLC for reliable, industry-standard control. The hot glue roll-fed system is optimized for consistent label feed, precise cutting, and accurate wrap-around application at high speeds. The rotary carousel with dedicated bottle plates supports stable container handling, while quick-access stations and repeatable settings facilitate efficient operation and changeovers.Operator-friendly Krones HMISiemens PLC-based automationRepeatable settings for label and container changesIP54 electrical cabinet protectionProduction Line Integration CapabilitiesDesigned for seamless integration into PET bottling equipment, this labeling machine can operate as a standalone unit or inline within a complete packaging machinery ecosystem. It fits beverage production lines handling wrap-around OPP labels on cylindrical PET containers.Standalone or inline integration with conveyorsCompatible with PET cylindrical bottlesSuited for high-speed industrial packaging linesApplicable in used bottling line and second hand equipment upgradesMachine Condition & Maintenance HistoryThe machine is ready for operation, overhauled, and supplied with compatible spare parts. It comes with a 6-month warranty, offering assurance of performance and reliability for immediate deployment in production.Ready for useOverhauled and testedIncludes compatible spare parts6-month warrantyOperational Performance & VersatilityEngineered for beverage applications that demand consistent wrap-around labeling quality a... Bledpfe Adt Iwjx Aa Eep

Condition: ready for operation (used), Year of construction: 2015, operating hours: 3,343 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, total height: 3,282 mm, total width: 4,039 mm, table width: 914 mm, table length: 1,626 mm, table load: 1,814 kg, overall weight: 11,250 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 40, tool weight: 5,400 g, product length (max.): 4,827 mm, number of axes: 3, This 3-axis Haas VF-8 vertical machining centre was manufactured in 2015. It features an impressive X-axis travel of 1626 mm, Y-axis travel of 1016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 1626 x 914 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the Haas VF-8 vertical machining centre we have for sale. Contact us for further details. • CNC control • Haas CNC control, Classic generation • 15-inch colour LCD • USB port • Program memory: 1 MB • Remote jog handle with colour display • Axis travels and feed rates • Spindle nose to table distance: 102–864 mm • Rapid traverse (X/Y/Z): 15.2 m/min • Maximum cutting feed rate: 12.7 m/min • Worktable • Table dimensions: 1626 × 914 mm • Max evenly distributed table load: 1814 kgSpindle • Spindle taper: 40 taper • Maximum spindle speed: 8,100 rpm • Spindle power: 15 kW • Two-speed gearbox • Spindle cooling system • Spindle taper air blast • Rigid tapping • Tool changer • Side-mounted tool changer: 40 positions • Coolant and chip removal • Through-spindle coolant: 20 bar, 22 L/min • ACF additional coolant filtration system: 25 µm Bedpfj Adz Ilsx Aa Ejlp • Programmable coolant nozzle position • Coolant system with pull-out coolant tank • Screw-type chip auger • Probing and machining options • WIPS-R wireless workpiece and tool probing system • Tool length and radius measurement • Workpiece measurement and setting cycles • PMDS probe interface, internal power supply and wiring • Spindle orientation, coordinate rotation and macros • VQC Visual Quick Code conversational programming • HSM High-Speed Machining with look-ahead for machining complex contours using three-axis interpolation • 4AXD fourth-axis preparation, including connections and wiring. Rotary table not included • APC-READY automatic pallet changer preparation, including eight additional functions, macro support and wiring. Pallet changer not specified as included Additional equipment • Ball screw thermal compensation • Fully enclosed machining area with sliding front doors and hinged side windows • Program memory lock • Compressed-air connection • EPFDM early power failure detection module • Automatic central lubrication • Machine lighting • CABCOOL CNC control cabinet cooling unit Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, laser type: diode laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 10 h, laser power: 24,000 W, warranty duration: 6 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, Standard Equipment Machine - Work area: 4000 x 2000 mm - Enclosed machine frame - Longitudinal conveyor belt - Motion unit for highly precise machining - Gantry drive in combination with linear direct drives - Cooling unit for machine and laser (water-air) - Work area lighting - Positioning laser diode - Spray device - Automatic nozzle cleaning - Integrated control cabinets - Integrated cabinet - Enclosed beam guidance via laser light cable (LLC) - Machine status indicator - Machine for ambient temperatures up to 45 °C - Transport and assembly device TRUMPF Laser - Excitation via pump diodes - Laser power control Cutting Head - Universal cutting head with fully adaptive lens system - Protective glass - Online condition monitoring of the protective glass - Dynamic Focus Control - Automatic nozzle centering Control System - Fast re-production - SINUMERIK control system - Ergonomic control panel with 21.5″ wide- screen multi-touch color display - Integrated technology data - Automatic shutdown - Programmable gas selection for pressure/cutting - Microweld - Remote support interface - Production plan - Multi-sheet processing - Condition Guide - Cutting Guide Functions - AdjustLine - BrightLine fiber - Smart Nozzle Automation - DetectLine - Drop&Cut - Integrated camera 1 for process monitoring - ControlLine - FlyLine - PierceLine - PlasmaLine - High-speed cutting package - High-speed cutting package Eco - Copper cutting package - Brass cutting package Data Transfer - USB interface - RJ-45 network interface - Online Update Manager Safety - CE marking and EC Machine Directive - Light barriers - Multi-chamber extraction system - Electric roll-up roof - Machine enclosure with certified viewing window door on the right and left Extended Standard Equipment - Compact dust collector - Support strips made of structural steel - Automatic pallet changer in longitudinal direction (standard/heavy-duty) Blodpo Afxu Sjfx Aa Eop - Nanojoints - Smart Rerun Extended Machine Equipment Extended Laser Equipment - External solid-state laser TruDisk 24001 with BrightLine fiber - Separate laser power supply Additional Cutting Packages - High-speed cutting package Eco - Sheet thickness extension cutting package Extended Machine Equipment - Machine for ambient temperatures up to 45 °C - Prefilter for gases N2 + O2

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 185300 € 3502.17 € 6 kW Wechseltisch 25 mm 15 mm 20 mm 10 mm 12 mm 3100 x 1525 mm 3100 mm 1525 mm 125 mm 3084 x 1524 mm 240 (für 3 - 12 kW) / 400 kg/m² 2200 (für 3 - 12kW) / 360 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 25 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 6 kW 12 kW 15 kW 20 kW Mild steelS235 25 30 35 40 Bjdpfx Aaex U Elbo Eolp Stainless steel(304) 15 25 35 40 Aluminium (5083) 20 30 35 40 Copper 10 15 15 15 Brass(CuZn39 Pb3) 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, 1 used steam boiler ----- Manufacturer: LOOS Gunzenhausen Type: U-HD 500 Heating surface approx.: 9 m² Boiler output max.: 500 kg/h Operating pressure: 10 bar Increased test pressure: 18 bar Bjdpo Afuubsfx Aa Eelp Water content when full approx.: 770 l Year of manufacture: 1997 Equipped with a Weishaupt oil burner, control cabinet, feedwater pump, and the existing coarse and fine fittings.

Condition: good (used), functionality: fully functional, FOR SALE: HURON MU4 Milling Machine Features and Capabilities (HURON MU4): • Machining travels: X = 1,100 mm | Y = 700 mm | Z = 500 mm • Table dimensions: 1,430 x 460 mm (with T-slots) • Milling head: Genuine HURON universal head with double rotation swivel (vertical, horizontal, and all-angle milling) • Feeds: Automatic and rapid on all 3 axes • Power supply: 400 V / Three-phase • Weight: Approximately 3,800 kg Included Equipment: • Industrial clamping vice (installed on the table) • Electronic control panel for displaying dimensions • Complete coolant system and floor-mounted electrical cabinet Bledpfx Ao Af Atfja Esp Condition: • Used equipment in working condition, sold as is.

Year of construction: 2004, condition: used, 2 units of PC-controlled tool dispensing cabinets, networked together. Spiral dispensing: 126 spiral slots, max. 63 per cabinet 2520 product capacity, max. 1260 per cabinet Electrical connection 230 V / 50 Hz, 16 A Dimensions L x W x H 990 x 980 x 1830 mm per cabinet Weight approx. 475 kg per cabinet Accessories / Special features: Ideal storage system for non-sensitive items with compact dimensions. A compact, stable outer packaging for each individual part is required. These parts fall into a cushioned dispensing chute. - Operation via large touchscreen - Hand scanner - Documentation New price: approx. 21,000.00 EUR net Siegfried Volz Werkzeugmaschinen Blodpfxodt El Hs Aa Ejp Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,000 h, This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Additional equipment • 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer • 2x ground temperature sensor with sword probe Machine Benefits Qualitative Machine Benefits • 13x anchoring for one fixing point installation tool • Pair of worms, compact version, made of highly tempered steel and bimetal design • Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar • Recirculating oil lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 d with atmospheric and vacuum degassing openings • Heating and air cooling divided into 5 zones, total output of 56400 w • Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit • Complete screw temperature control including cassette installation • Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages Technical Machine Benefits • Stationary for an extrusion height of 1000 mm Blsdpfxex D Ewmj Aa Eop • Complete control cabinet with all necessary control and regulation equipment attached • Microprocessor-controlled multi-channel controller for two and three-point zones • Adaptive and self-optimizing control behavior • Fault messages with collective alarm and storage • Siemens mp377 touch panel for setpoint specification and actual value display • Recipe management of up to 20 recipes • Drive with one ac motor, vector-controlled • Digital drive controller for ac motors, with full digital technology • Motor temperature monitoring with pre-warning and shutdown Extra Information Machine still under power

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00741, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2025.09. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.09 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Bjdpfx Aas Afzxys Ejlp Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.08 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Year of construction: 2015, condition: new, We have a MATICA Espresso card printer available. This printer is bought by us in 2015 and has been standing in the showroom. Price new ist € 1.599,-, price now is € 999,- We have come to the conlcusion that this type of machinery is not the type of machinery we are able to offer as a distributor in a correct manner. Therefore this printer is new and has just printed max 10 cards in its life. Single or double side edge-to-edge Optional Magstripe and Smart Card encoder Ethernet and optional WiFi Prints up to 850 cards per hour 100-card feeder The Matica Espresso II is a compact and powerful desktop ID card printer, that is a brainchild of Italian design & engineering and reflects German reliability in consistent performance. The Espresso II offers great value and versatility with extraordinary printing speed and outstanding print quality. With its robust and durable construction, the Espresso II looks and works great in any office or card production environment. The Espresso II is a single side desktop ID card printer for projects needing printing only on one side. The Espresso can be field-upgraded to easily double the printing capacity with the duplex printing feature. Any Espresso II printer can evolve to duplex anytime, anywhere without the need to install additional hardware components. Contact and contactless smart card encoding are also field-upgradable features. LED status indicators on the front of the printer allows you to monitor the card production process at a distance, and the blue LED light on the card hopper door keeps you aware of your card input availability in real time. You can also use optional single card manual insertion for individual card printing as needed. Each printer comes with a rear output hopper to catch full card runs as needed, which can improve the throughput speed in higher volume scenarios. In standard setup, having front-side input and output trays is also convenient for situations where space is limited, in a desktop environment, a cabinet or under a counter. Each Espresso II printer also has the option for inline magnetic stripe, contact chip or contactless smart card encoders, to maximize its functionality for a broader set of application uses, such as access control, time & attendance, payment services, and many more. Blsdpfxofnldqj Aa Eop The entire line offers Ethernet connectivity and optional WiFi making printing and encoding convenient and trouble-free. You can easily define your printer and choose the one that perfectly matches your current needs, as Espresso II offers a vast range of options. Whether or not your requirements evolve in the future, you have still the possibility of making an upgrade by adding functionalities to your existing configuration. The new printer line works perfectly for a wide variety of applications such as Employee and Membership ID Badges, Service and Benefits Cards, Gift and Loyalty Cards, Access Control Cards, Student IDs, and Transit Cards, just to name a few. The Espresso II is available with different specifications ​— modules, encoding, color, etc..

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 219400 € 6 kW Wechseltisch 25 mm 15 mm 20 mm 10 mm 12 mm 4100 x 2070 mm 4100 mm 2070 mm 125 mm 4064 x 2032 mm 240 (für 3 - 12 kW) / 400 kg/m² 3900 (für 3 - 12 kW) / 64 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 32 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 6 kW 12 kW 15 kW 20 kW Mild steelS235 25 30 35 40 Stainless steel(304) 15 25 35 40 Aluminium (5083) Bledpfex Urp Hox Aa Ejp 20 30 35 40 Copper 10 15 15 15 Brass(CuZn39 Pb3) 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00707, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2025.04. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Blodpfxj Afuy Re Aa Eep Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.04 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.03 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: repair required (used), Year of construction: 1985, functionality: limited functionality, machine/vehicle number: 11710519, spindle bore: 1,250 mm, spindle motor power: 56,000 W, quill travel distance: 1,000 mm, workpiece weight (max.): 1,600 kg, Equipment: documentation/manual, Machine type: CNC vertical lathe Manufacturer and model: Schiess AG - Schiess Moweg GmbH; Type 12DS100 Schiess Year of manufacture: 1985 Serial number: 11710519 Technical condition: Machine in working order; used, requires repair Technical specifications: Working range: Table dimensions - Pallet D=1000 [mm], max. turning height H=800 [mm], max. turning diameter D=1250 [mm] Tailstock stroke S=1000 [mm]; adjustable cross slide - positioning every P=500 [mm] Table load capacity: 1600 kg Control system type: Siemens - Sinumerik 840 D Main drive power - 56 kW; Maximum rotational speed: 500 rpm Axis positioning accuracy: 0.02 [mm] - axis measuring system: optical scales Axis feed rate - "rapid": 6000 mm/min Axis feed rate - "working": 0.1 - 2000 mm/min Cutting fluid - yes - through the tool Number of axes: 2-axis lathe Drive type: servo drives Additional equipment: Tool magazine: 12 positions Material feeding system: loading station at the pallet magazine Palletizing system - 2 pallet magazine; pallet loading station; machine table - a total of 2 pallets Chip transport system - yes Cooling system - control cabinet air conditioning - yes Operating manual - paper version in Polish and German, digital version in German Bledezvnbxspfx Aa Esp Currently, the machine has been disassembled from the hall and is ready for loading into a container. Arranging for the container and the company that will load the machine into the container is the responsibility of the buyer.

Condition: used, maximum load weight: 32,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2026, next inspection (TÜV): 03/2027, loading space volume: 28 m³, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2026, Equipment: ABS, KÄSSBOHRER stainless steel tank semi-trailer, 28,000 liters, for AdBlue. First registration 03/2026, from first owner. Mileage only 41,100 km. Tank saddle trailer made of V2A stainless steel, 100 mm insulation, Volume 28 cbm, with 2 baffle plates. The front baffle is closed in the lower area, so approximately 5,000 liters remain in the first compartment above the kingpin. Discharge takes place via an outlet with a disc valve, ending in the rear cabinet. 1 x filling dome/manhole DN 500. Aluminum short chassis, Wabco trailer EBS with RSS anti-roll protection, BPW axles with disc brakes, Tires 6 x 385/65 R 22.5, Shiny aluminum rims, 1st and 3rd axles are lift axles, Blodpfsz Hr U Usx Aa Eop Access ladder on the right side of the tank. Data acquisition via BARTEC PETRO 3003 Chem with compact controller, printer in a protected stainless steel display case, wireless remote control for hose reel, 20 m. Delivery hose DN 50, 1x Vogelsang rotary lobe pump GL186Q, self-priming, tank filling with its own pump, fast loading and unloading with up to 600 l/min. delivery rate, Overfill protection internal and external, 2" delivery device. Condition as new, immediately available. RENTING is the new BUYING; with us, it is also immediately available with a full-service rental agreement.

Condition: new, functionality: fully functional, Year of construction: 2026, oil tank capacity: 90 l, overall weight: 1,800 kg, total length: 1,900 mm, total width: 1,350 mm, total height: 1,850 mm, power: 4 kW (5.44 HP), input voltage: 400 V, pressing force: 40 t, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, CNC PRESS BRAKE 40 t × 1320 mm – NEW, 2026 – IN STOCK 2-axis (Y + X) hydraulic press brake with touchscreen CNC control Bsdpfsyr N E Eox Aa Eslp Compact, accurate hydraulic CNC press brake with 400 kN (40 t) pressing force and a 1320 mm working table. Built for sheet-metal workshops that need repeatable bends, a fast set-up and a small footprint. The machine has passed the manufacturer's final inspection (report dated 9 October 2026, result OK). KEY FEATURES • MTP-3212 touchscreen CNC controller with 2 controlled axes: Y (ram / bending depth) and X (motorised back gauge) • Back gauge with 500 mm travel, 0.1 mm positioning accuracy, driven by a ball screw (Taiwan SHAC) • Repeat positioning accuracy of the ram: 0.1 mm • Rexroth hydraulic system, American hydraulic pump and Parker seals • Siemens main motor, Schneider electrical components • Quick-clamp system for the upper tools, standard punch • Foot pedal with emergency stop SAFETY (CE) • Light curtain protection at the front • Full-size rear door with power-off when opened • Large protective guards on both sides • Emergency stop on the control panel and on the foot switch • Electrical cabinet wired to CE standard TECHNICAL DATA • Nominal force: 400 kN (40 t) • Working table length: 1320 mm • Distance between uprights: 950 mm • Throat depth: 200 mm • Ram stroke: 90 mm • Open height: 300 mm • Controlled axes: 2 (Y, X) • Back gauge stroke: 500 mm, accuracy 0.1 mm, max. speed 100 mm/s • Ram speed: rapid 60 mm/s, working 15 mm/s, return 60 mm/s • Main motor: 4 kW • Voltage: 400 V, 3 phase, 50 Hz • Dimensions (L × W × H): approx. 1900 × 1350 × 1850 mm • Weight: 1800 kg (per nameplate) • Year of manufacture: 2026, new machine TERMS Available immediately from stock in our warehouse in Sokołów Podlaski. Price 8 900 EUR net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and operating manual included. Transport to any European destination – delivery quote on request.

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 610 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 610 CNC was manufactured in 2024. It features a longitudinal travel of 610 mm, transverse travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with a 20-station tool changer and a maximum table load of 300 kg. If you are looking to get high-quality milling capabilities, consider the KUNZMANN WF 610 CNC vertical machining centre we have for sale. Contact us for further details. Blsdpfxo Af Nzue Aa Eop - Demonstration machine- Spindle Hours: 332 h- Program Run Hours: 310 h- Feed Rate (Rapid Traverse): X/Y/Z up to max. 30/30/15 m/min - Main Drive (Option Installed): SK 40 Motor Spindle, 1 - 12,000 rpm (Swiss made) - Spindle Power: 8.5 kW (S1-100% ED) / 11.5 kW (S6-40% ED) - Spindle Torque: 43 Nm (S1-100% ED at 1,880 rpm) / 58 Nm (S6-40% ED at 1,880 rpm) - Tool Interface: SK 40 DIN ISO 7388-1 Form AD (formerly DIN 69871 AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872) - Tool Clamping: Mechanical, clamping force 10,000 N, hydraulic release - Vertical Milling Head: Direct-driven, manually tiltable -5/+90°, extendable quill with turnstile (stroke 70 mm, clampable) - Rigid Angle Table Surface: 800 x 425 mm - Table T-Slots: 6 x 14 H7 (pitch 63 mm) - Max. Table Load: 300 kg - Tool Changer: 20-station disc magazine, SK 40 - Max. Tool Diameter: 75 mm (full magazine) / 150 mm (with adjacent empty pots) - Max. Tool Length: 250 mm - Max. Tool Weight: 8 kg - Tool Change Time: approx. 3 s (chip-to-chip approx. 15 s) - Positioning Accuracy (ISO 230-2): 0.008 mm (direct linear measuring systems) - Repeatability (ISO 230-2): 0.006 mm (direct linear measuring systems) - Measuring System: HEIDENHAIN absolute direct linear measuring system (resolution 0.001 mm) - Coolant Through Spindle (IKZ): 50 bar high-pressure pump (26 l/min), 4-stage pressure adjustment (15/25/40/50 bar), 25 µm double switch filter - Internal Air Cooling: Through-spindle air cooling, M-function programmable - External Air Cooling: Flexible articulated hose, M-function programmable - Paper Band Filter Unit: Trommel-mulden filter with 600 l external tank, type VDF150/50/50 (150 g/m²) filter fleece (dimensions: 1800 x 860 x 1620 mm) - Chip Conveyor: Hinge-belt conveyor integrated into 115 l coolant tank, 60° incline, lateral discharge left (height 870 / 1060 / 1200 mm) - Workpiece Probe: HEIDENHAIN TS 460 3D probe (infrared) with SE 661 transceiver - Additional Axes Preparation: 4th axis preparation (axis controller in electrical cabinet, pre-wired interface) - Automation Interface: Preparation kit for EDUCATION4.0 Cobot cell (Harting connector I/O interface, pneumatic connection, plus 2x pneumatic table connections max. 6 bar) - Enclosure Door: Automatic sliding front door driven by belt drive (manual push button & programmable) - Software Option: OCM (Optimized Contour Milling) for advanced trochoidal milling - Handwheel: HEIDENHAIN HR 510 FS electronic handwheel with axis selection and emergency stop - Operating Voltage: 400 V, 50 Hz - Power Consumption: approx. 21 kVA - Control Voltage: 24 V - Compressed Air Supply: 6.5 - 10 bar (min. 6.5 bar required at machine) - Machine Weight: approx. 2,900 kg (with tool changer)

Condition: excellent (used), Year of construction: 2012, control type: CNC control, controller manufacturer: Mazatrol, laser power: 4,000 W, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, overall weight: 12,700 kg, total length: 8,500 mm, total width: 4,500 mm, total height: 2,800 mm, Machinery manufacturing: Producing machine covers, brackets, panels and structural components. Automotive industry: Manufacturing brackets, components and prototype parts. Agricultural machinery: Producing parts for tractors, trailers and agricultural equipment. Construction and steel fabrication: Cutting connection plates, mounting brackets and structural parts. HVAC and ventilation: Manufacturing ventilation components, panels and ductwork. Automatic sheet loading and unloading system – Large overhead gantry with integrated sheet handling equipment, suitable for automated material transfer. Mazak CELL 510 VA automation system – Separate automation control cabinet, identified by its nameplate and operating panel. Automatic pallet changer / shuttle table – Two cutting pallets allow material preparation and unloading while the machine processes another sheet. Dust extraction equipment – Large extraction ducting and associated equipment visible, although the complete filtration installation cannot be verified. Safety enclosure – Perimeter safety fencing with access gates and emergency-stop controls around the automation system. Bodpfx Aao Agfxns Eolp Machinery manufacturing: Producing machine covers, brackets, panels and structural components. Automotive industry: Manufacturing brackets, components and prototype parts. Agricultural machinery: Producing parts for tractors, trailers and agricultural equipment. Construction and steel fabrication: Cutting connection plates, mounting brackets and structural parts. HVAC and ventilation: Manufacturing ventilation components, panels and ductwork. Electrical cabinet manufacturing: Cutting enclosures, control panels and mounting plates. Main technical specifications Working area: Approximately 3,050 × 1,525 mm Mild steel cutting capacity: Up to 25 mm Stainless steel cutting capacity: Approximately 12 mm Aluminium cutting capacity: Approximately 10 mm Working area X Axis: 3050mm Working area Y Axis: 1525mm Working area Z axis: 150mm Table Length: 3000mm Table Width: 1500mm Power resonator: 4000kW / Amp Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Sheet master loading arm:yes Dust collector: yes Length: 8500mm Width: 4500mm Height: 2800mm Weight: 12700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00743, load capacity: 150 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, ABB IRB 6700-150/3.20 manufactured in 2015.08. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6700-150/3.20 Model Number: IRB Blede Agm Tfjpfx Aa Eep Year of Manufacture Robot: 2015.08 Warranty term (months): 12   Payload (kg): 150 Reach (mm): 3200 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1260   Controller: IRC5 Year of Manufacture Cabinet: {year_of_manufacture_cabinet} RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15