Temperature cabinet 335 liters

Weiss WT3-340/70 -72°C bis +180°C

Condition: excellent (used), Here we offer a Weiss climate test chamber. Designation: SB2/500/80 water cooled Cold-heat operation: -75°C ...+180°C Climatic operation: +10...+95°C Humidity range: 10...98 % r. h. Temperature constancy, temporally ± 0.2K Humidity constancy: ±1 r.F. Temperature rate of change: Cooling: approx. 1.4 K/min Heating up: approx. 2.5 K/min External dimensions: Height 1980 mm, width 1265 mm, depth 1365 mm Gsdpfxem Tvzcj Ah Douk Feedthroughs: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/ 50 Hz Power: 10,4 kVA Weight: approx. 720 kg Refrigerant R404a / R 23 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), CTS Type: C-40/60 CTS small climate chamber air-cooled Test volume: 60 liters Temperature range: -40 °C / +180 °C Humidity range 10% to 98% relative humidity +10 °C to +90 °C in the temperature range +5 °C to +89.5 °C in the dew point range Dimensions (WxDxH): Inside: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal voltage: 230V 1/N 50 Hz Output: 3.3 kW Rated current: 13 A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Guedou Hlb Eepfx Ah Dok Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), White Type: WK-340/70 Air-cooled Test chamber capacity: approx. 335 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1805 mm, Width 780 mm, Depth 1700 mm Characteristics for temperature tests: Temperature range -70 to +180°C Temperature fluctuation over time: ± 0.1 to ± 0.5 K Temperature fluctuation over space: ± 0.5 to ± 2.0 K Temperature change rate for heating: 3 K/min Temperature change rate for cooling: 2 K/min Characteristics for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Temperature fluctuation over time: ± 0.1 to ± 0.3 K spatial ± 0.5 to ± 1 K Guedpfx Aov Uap Neh Dek Humidity fluctuation in the center of the usable space ± 1 to ± 3% RH Electrical connection: 3/N/PE AC, 400 V ± 10%, 50 Hz Connected load: approx. 4.1 kW Rated current: 14.0 A Sound pressure level: approx. 60 dB(A) Weight: approx. 500 kg Refrigerant: R404A / R23 For your safety, please note the following information!   The following steps are carried out in advance on our chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful testing, the chambers are subjected to a test run monitored by calibrated devices. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Type: Weiss WT3-340/70 Very good condition Weiss temperature cabinet with S!MCON / 32 control, air-cooled (refrigerant (R-404A) (can be converted to R452A on request) Test room capacity: approx. 335 liters Test room dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Data for operation: Test room lighting halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Nominal current: 12.5 A Nominal power 4.1 kW Fuse provided by customer 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 58 dB(A) Data for temperature tests: Temperature range: -72 to +180 °C Temperature deviation over time in the middle of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerant: R-404A / R-23 Weight: 585 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components Guedpfx Ahjv Edd Se Dek 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run with calibrated measuring devices. Condition: used / used Very good condition

Year of construction: 2019, condition: good (used), Various climate chambers for testing a wide range of products. Example: Vötsch Type: VC 0018 Climate test chamber Air-cooled Guodpfxoxgrz Rs Ah Dok Test chamber dimensions: Width 580 x Depth 450 x Height 750 mm

Year of construction: 1993, operating hours: 1,04,599 h, condition: good (used), Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Machine hours 104,599 hours Screw Diameter 35mm Godpfx Asvl Hzgeh Deuk Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000kg

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm Guodpfxsxdi Eze Ah Dok External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Vötsch Type: VC 7018 Guodpfx Ahjwh Ttme Djk Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Rofin Type: PowerLine Pico 532 - 10 CombiLine Basic WT VLM - Visual Laser Marker VLM is an innovative, flexible marking software that is used on Rofin laser systems. laser systems. VLM follows the WYSIWYG concept and offers the flexibility of a the flexibility of powerful yet easy-to-use software. VLM can be used to apply markings of various types such as matrix codes, barcodes and serial numbers, barcodes and serial numbers. Depending on the material, even the smallest markings are possible. The innovative software ensures reliable marking of reliable marking of flat and curved surfaces, and οη-the-fly applications are also possible. Common formats such as DXF or optionally PDF are supported for importing layouts. Technical data of the laser: Laser head Wavelength: 532 nm Power: approx. 3W at 400 kHz Pulse frequency: 200-800 kHz, Beam quality: TEMoo Energy per pulse: 7.5 μJ at 400 kHz , 3.5 μJ at 800 kHz Peak power: 7.5 kW at 400 kHz Dimensions: approx. 450 mm X 168 mm X 235 mm (L X W X H) Weight: approx. 14 kg (with standard Galvo RM10) 19" supply unit Dimensions: 2HEx19''x350 mm(HxWxD) Weight: approx. 20 kg Cooling: integrated air cooling Supply voltage: 115 - 240 V +/-10%50 ا Hz / 60 Hz Power consumption: approx. 800 W Ambient temperature: 15°- 35°C, non-condensing Air flow rate: 80 m³/h PC Mini-ΙΤΧ SSD removable disk 250 GB Software at least VLM 5.2 Windows Embedded Standard 7 Other options 19" panel can be removed Positioning aid Adjustable 3-foot support The following components were additionally selected from the standard scope of delivery: Ρ255-532 lens ٢= 255 mm: 532 nm Labeling field 180 mm X 180 mm S10-532 Galvo head unit S10: 532 nm Galvo head S10 including selected objective, holding set for optics and protective Gusdpetz Rk Hjfx Ah Dek protective glass or protective glass slider. Size: approx. 165 mm X 118 mm X 147 mm (L X W X H) Weight: approx. 4.4 kg CombiLine Basic (V2): The CombiLine Basic is a user-friendly laser class 1 system (in accordance with EN 60825-1 ), which, thanks to the use of largely preconfigured functional preconfigured function modules, enabling optimum adaptation to customer-specific requirements. The frame contains all control components and functional elements. functional elements. An aluminum plate with standard or customer-specific workpiece holders, an aluminum plate with a standard drilling pattern serves as the basis. The fully automatic, electrically operated door enables workpieces to be loaded and unloaded. The machining area can be viewed at any time through the large observation window. A programmable z-axis, including control and motor, is included as standard, is used for vertical focus adjustment. This takes place in automatic mode according to the specifications of the marking program. Technical data: Dimensions: approx. 1200 mm X 1750 mm X 800 mm (W X H X D) Door opening: approx. 560 mm X 680 mm (W X H) Weight: max. 380 kg Connection: 230V+/-10%: 1/Ν/ΡΕ Power: max. power consumption 3 kVA Monitor: 15" TFT with touch function Z-axis: max. 300 mm stroke Workpiece: max. 20 kg Weight (incl. holder) max. 690x 490x 293 mm (W x L x H)

Condition: excellent (used), Here we offer a climate test chamber. Climate cabinet RS SIMULATORS KS600/70 AIR COOLED Climatic test chamber -70/180°C + humidity Last maintenance and leak test carried out 03/2024 by RS simulators Here we offer a climate test chamber. RS climate test chamber air-cooled Guodpfx Ahovu Ui Rs Dek Refrigerant: R404/R23 Temperature range -70°C to + 180°C Time deviations +/- 0.5 K with empty test chamber Average heating and cooling time approx. 2 K / min Humidity range 10% to 95 % External dimensions: width 1200 mm depth 1600 mm x height 1995 mm Test chamber dimensions width 840 mm x depth 840 mm x height 840 mm Nominal voltage: 3/N/PE AC, 400 V, 50 Hz Nominal power: 7.5 KVA Nominal current: 15 A Fuse, on-site: 16 A slow-blow Side feedthrough Cabinet is air-cooled Refrigerant R-404A/R23 Weight approx. 600 kg Type: KS 600/70