Used Calibrating for sale (861)

Condition: used, Year of construction: 2023, operating hours: 1,000 h, functionality: fully functional, For sale are 12 ABB robots, year of manufacture between 2021 and 2023. Hfedpfxsx R Uz Rs Adwob Configuration includes: RobotWare 6.14.01.00; RobotWare Base; 888-3 PROFINET Device; 608-1 World Zones; 885-1 SoftMove; 613-1 Collision Detection; 996-1 Safety Module; 1125-1 SafeMove Basic; 735-7 Keyless Mode Switch; Motor Commutation; Service Info System; Pendulum Calibration; Drive System IRB 4600 (...) All technical specifications available upon request.

Condition: used, Year of construction: 2016, functionality: not functional, machine/vehicle number: 3752, Technical characteristics: Measurement Capabilities - Traversing length (X-axis): 0.2 mm to 120 mm - Measuring range (Z-axis): 50 mm - Resolution (Z-axis): * Relative to stylus tip: 0.38 µm (with 350 mm probe arm), 0.19 µm (with 175 mm probe arm) * Relative to measuring system: 0.04 µm - Guide deviation: < 1 µm over 120 mm - Measuring force (Z-axis): Adjustable from 1 mN to 120 mN - Tracing angle: Up to 88° trailing edges, 77° rising edges Performance & Speed - Measuring speed (X-axis): 0.2 to 4 mm/s - Contacting speed (Z-axis): 0.1 to 1 mm/s - Positioning speed: * X-axis: 0.2 to 8 mm/s * Z-axis: 0.2 to 10 mm/s Hfjdpfxexx R Tpj Adwsb Stylus & Probe - Probe arm lengths: 175 mm or 350 mm - Stylus tip radius: 25 µm - Stylus exchange: Magnetic mount for tool-free swapping - Calibration: Individual stylus data stored for rapid setup System & Software - Control unit: MidRange Standard PC with MarWin-based XC2 software - User interface: Touchscreen with intuitive icons and Quick & Easy programming - Evaluation features: * Regression lines, circles, points, radii, angles, coordinates * Nominal/actual comparison * DXF import (optional) * Tolerance monitoring * Automatic program runs Included Components: - CD 120 drive unit - ST 500 measuring stand with granite plate (700 × 550 mm) - MCP 23 manual control panel - CT 120 XY table with rotary adjustment - Calibration set - 17" TFT monitor Machine status: NOT WORKING – License key lost, requires new reboot with license key.

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 Belt sanding machine with combination unit with electronic segmented pressure beam for sanding of soft and hard veneers Calibrating and fine sanding of solid wood Calibrating workpiece carrier boards Sanding of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro, and polyester lacquers Sanding of blocking foils with graphical control terminal NC-controlled thickness adjustment from 3-150 mm Calibration roller can be switched on via terminal with patented CSD segmented pressure beam to compensate for workpiece tolerances up to 2 mm Sanding width: 1350 mm Abrasive belt length: 2150 mm Hedpfx Asx Rpghsdwsfb Abrasive belt speed, frequency controlled: approx. 2-18 m/sec Motor power (sanding unit): 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt cleaning air blast: 490 l/min Extraction port: 180 mm Air requirement sanding unit: 1800 m³/h Required air speed: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (WxDxH): 2090x1670x2020 mm Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2019, x-travel 800 mm y-travel 1020 mm z-travel 970 mm Control TNC640 B - axis 360 x 0,001 ° feed B-axis max. 50,00 U/min A - axis -185 / +45 x 0,001 ° feed A-axis max. 25,00 U/min Hedpjxn Amasfx Adwsfb feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206,00 / 159,00 Nm spindle diameter in front bearing 80 mm tool taper HSK-A63 tool magazin: 70 tool length - max. 500 mm tool diameter 118 mm tool diameter with 2 vacant positions 260 mm tool total weight 22,00 kg Chip to chip time 4,2 sec. size of pallet Ø 770 mm workpiece weight 800 kg interference diameter 900 mm total power requirement 35,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 7,00 x 3,50 x H3,50 m 5-axis machining center with Heidenhain TNC640 control, integrated KNOLL coolant system KF220, coolant high-pressure 23bar, coolant through the spindle, chip conveyor, measuring probe Heidenhain TS640, electromechanical tool length check, Swivel axis calibration GSC, collision monitoring "DCM Collision", BLUM-Laser, GROB Spindle-diagnosis (GSD), kinematics-set.

Condition: good (used), Force measuring device, force measuring instrument, calibration, force measurement technology, load cell, tensile force measuring bearing, force sensor, tensile and compressive force sensor Hedeg Sxyvopfx Adwefb -Manufacturer: Lorenz, 4 pieces tension and compression force sensor with Durbal, rod end spherical bearing -Sensor: Lorenz Type K-12 -Measuring range: - 100 kN -Sensitivity: 1.000mV/V / 0.999mV/V / 1.001mV/V -Swivel bearing: Durbal EF 35-20-501 -Dimensions of the articulated rod: 445 to 530 x 81 x 65 mm -Fork head: Bore Ø 35 mm -Number: 3 boxes available, sensitivity as shown in photos -Price: per box -Box dimensions: 590/390/H200 mm -Weight: 30.2 kg/box

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area Hsdpfx Asg N Nlvsdwsfb 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: new, Year of construction: 2025, control type: CNC control, controller manufacturer: ESA veya LYNCA, laser type: fiber laser, sheet thickness (max.): 40 mm, travel distance X-axis: 8,030 mm, travel distance Y-axis: 2,030 mm, travel distance Z-axis: 120 mm, power: 15 kW (20.39 HP), Working Area: 8000 × 2000 mm (8020 Model) STANDARD FEATURES CNC-controlled fiber laser sheet metal cutting machine High rigidity, heavy-duty steel frame and bridge structure, FEM-analyzed Hfedjx Nqtmspfx Adwob Rack and pinion drive system Laser cutting head with automatic motorized focusing Automatic height control system with capacitive sensor Automatic focus distance adjustment during cutting High-precision linear guides and servo motor system Advanced touchscreen CNC control unit (Windows-based) User-friendly CNC interface with multi-language support EtherCAT communication infrastructure Monitoring of temperature, pressure, protective glass status, and back reflection at the cutting head Internal and external machine monitoring system with camera support LED status and warning indicators Fiber laser beam transmission via fiber cable (no optical mirror/lens loss) Automatic sheet recognition and alignment systems Fly-cut (continuous serial cutting) capability No Piercing mode for burr-free cutting of thin sheets Controlled piercing mode for thick sheet cutting Fully enclosed cabin design in accordance with CE standards Special safety glass resistant to laser beams CNC-controlled filtered ventilation system Automatic nozzle cleaning and cutting head calibration Conveyor slag and part discharge system Moveable table system Emergency stop buttons and safety interlocks OPTIONAL FEATURES Dual pallet automatic table exchange system Fiber laser resonator in various power options Automatic sheet loading system Automatic parts unloading system Advanced CNC-controlled filtration unit Camera-based automatic sheet recognition and nesting software Remote monitoring and reporting package Oil cooler / climate control system Additional LED lighting inside the cabin Special cutting head alternatives Additional gas control and pressure regulation systems TECHNICAL SPECIFICATIONS (8020 MODEL) Axes X Axis: 8030 mm Y Axis: 2030 mm Z Axis: 120 mm Motion Performance Acceleration: 2.0 G Max. axis speed: 140 m/min Synchronized speed: 200 m/min Positioning accuracy: ±0.05 mm Repeatability accuracy: ±0.03 mm Table and Loading Max. table loading capacity: 3,500 kg Table exchange time (optional): ~35 sec Laser Power Options 4 kW / 6 kW / 8 kW / 10 kW / 12 kW / 15 kW Cutting Capacities (max.) Mild steel: 25 – 40 mm (depending on power) Stainless steel: 10 – 30 mm Aluminum: 10 – 30 mm Gas Pressures Oxygen: 13 bar Nitrogen: 25 bar Air: 13 or 25 bar General Machine weight: ~32,000 kg Average power consumption: 30 – 110 kW/h (depending on laser power)

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: SAA81E9S0112721, Technical characteristics: System Components - XR1 Evaluation Unit: PC-based system with MarWin software - SD26 Drive Unit: Skidless tracing system with motorized height adjustment - ST-G Measuring Stand: Granite base (500 × 300 mm) with manual column adjustment Measurement Capabilities Hfjdpexx R Rnofx Adwob - Tracing length: 1.75 mm, 5.6 mm, 17.5 mm (DIN/ISO); 1–16 mm (ISO 12085) - Tracing speed: 0.2 mm/s or 1 mm/s - Positioning speed (X-axis): 5 mm/s - Height adjustment (Z-axis): 7.5 mm motorized - Positioning speed (Z-axis): 2 mm/s - Measuring range: ±250 µm (±500 µm with extended probe arm) - Probe force: ~0.7 mN Probe System: BFW 250 (skidless, magnetic mount for fast change) Software & Evaluation - Supported parameters: R, P, W, Motif, D profiles - Standards: ISO, JIS, MOTIF (ISO 12085) - Features: - Over 80 surface parameters - Automatic cutoff and measuring path selection - Quick & easy measuring programs - PDF report generation - ASCII export and USB data transfer - Multi-user levels and calibration reminders Hardware & Interface - PC: All-in-one or industrial PC (optional) - Connectivity: USB and Bluetooth (for drive unit) - Display: Touchscreen interface with intuitive icons Accessories: - CT 120 cross table - Calibration set - Magnetic probe arm holder - Optional contour evaluation module Machine status: WORKING

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Adjustable pressure pump with handwheel to obtain the required power. Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Hedpfx Asfh R N Dsdwsfb Rapid rod feed : mm/min 1.400 Slow rod feed : mm/min : 130 Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Piston descent speed : mm/sec 23 Tank capacity : litres 30

Condition: refurbished (used), Year of construction: 2016, CLIPPER POLY CLIP FCA 80 2016 year After capital renovation Hodpfovbfiuox Adwsfb 3 months warranty for parts. For the 38 mm to 160 mm calibre range. All bearings, bushings and rollers new. New funnel with brake. Delivery time: 3 weeks. 15% prepayment.

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller Hedpfx Aoxwyhtjdwefb – Top section: 2 steel rollers, slip type Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, Rondo Doge Bread & Pastry Line. Year of production 2006. Total length 16.7m (Machine 11.55m + tables 5.15m) Width 1.80m (working width 0.7m) Height to hopper 3m. Total height 4.05m Efficiency: 600kg per hour - from 2500 pcs to 7500 pcs of products per hour for square, triangular and flat products Ability to produce a very thin continuous line of dough - from 1 mm to 24.5 mm. - Dough portioning hopper - 3 sprinklers - 2-roll dough extruder - calibrator - satellite sheeter Hodpfx Adown Hhqowsfb - flour sprinkler - cross roller - longitudinal plate assembly - dough folders - pneumatic guillotine Machine connected to the power supply and ready to work.

Condition: new, Year of construction: 2025, control type: CNC control, controller manufacturer: ESA veya LYNCA, laser type: fiber laser, sheet thickness (max.): 35 mm, travel distance X-axis: 6,030 mm, travel distance Y-axis: 2,030 mm, travel distance Z-axis: 120 mm, power: 12 kW (16.32 HP), Working Area: 6000 × 2000 mm (Model 6020) STANDARD FEATURES CNC-controlled fiber laser sheet metal cutting machine Heavy-duty, high-rigidity, fully analyzed steel frame and gantry structure Rack and pinion drive system Laser cutting head with motorized automatic focusing Automatic height control system (capacitive sensor) Automatic focus adjustment during cutting High-precision linear guides and servo motor system Advanced Windows-based touch-screen CNC control unit Hodex Nqr Nepfx Adwsfb User-friendly CNC interface with multi-language support EtherCAT communication infrastructure Cutting head monitoring: temperature, pressure, protective glass status, and back reflection Internal and external camera-assisted monitoring system LED status and warning indicators Fiber-optic delivery of laser beam (no optical mirror/lens losses) Automatic sheet detection and alignment systems Fly-cut feature for uninterrupted serial cutting No Piercing mode for burr-free cutting of thin sheets Controlled piercing mode for thick plate cutting Fully enclosed CE-compliant cabinet design Special protective glass blocking laser radiation CNC-controlled filtered ventilation system Automatic nozzle cleaning and cutting head calibration Slag and part removal system with conveyor Movable table system Emergency stop buttons and safety interlocks OPTIONAL FEATURES Automatic shuttle table system (dual pallet) Fiber laser resonator options with various power ratings Automatic sheet loading system Automatic part unloading system Advanced CNC-controlled filtration unit Camera-based automatic sheet detection and nesting software Remote monitoring and reporting package Oil cooler / air conditioning system Additional LED lighting inside enclosure Special alternative cutting heads Additional gas control and pressure regulation systems TECHNICAL SPECIFICATIONS (MODEL 6020) Axes X Axis: 6030 mm Y Axis: 2030 mm Z Axis: 120 mm Motion Performance Acceleration: 2.5 G Maximum axis speed: 150 m/min Synchronized speed: 210 m/min Positioning accuracy: ±0.05 mm Repeatability: ±0.03 mm Table and Loading Maximum table load capacity: 3000 kg Table exchange time (optional): ~30 s Laser Power Options 3 kW / 4 kW / 6 kW / 8 kW / 10 kW / 12 kW Maximum Cutting Capacities Mild steel: 20 - 35 mm (depending on power) Stainless steel: 8 - 25 mm Aluminum: 8 - 25 mm Gas Pressures Oxygen: 13 bar Nitrogen: 25 bar Air: 13 or 25 bar General Machine weight: ~26,000 kg Average power consumption: 25 - 90 kW/h (depending on laser power)

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3286, Technical characteristics: Measurement Capabilities - Traversing length (X-axis): 0.2 mm to 120 mm - Measuring range (Z-axis): 50 mm - Resolution (Z-axis): - Relative to stylus tip: 0.38 µm (with 350 mm probe arm), 0.19 µm (with 175 mm probe arm) - Relative to measuring system: 0.04 µm - Guide deviation: < 1 µm over 120 mm - Measuring force (Z-axis): Adjustable from 1 mN to 120 mN - Tracing angle: Up to 88° trailing edges, 77° rising edges Performance & Speed - Measuring speed (X-axis): 0.2 to 4 mm/s - Contact speed (Z-axis): 0.1 to 1 mm/s - Positioning speed: - X-axis: 0.2 to 8 mm/s - Z-axis: 0.2 to 10 mm/s Stylus & Probe Hfsdpfsxx R I Hjx Adwjb - Probe arm lengths: 175 mm or 350 mm - Stylus tip radius: 25 µm - Stylus exchange: Magnetic mounting for tool-free changeover - Calibration: Stored stylus-specific data for quick setup System & Software - Control unit: MidRange Standard PC with MarWin-based XC2 software - User interface: Touchscreen with intuitive icon navigation and Quick & Easy programming - Evaluation capabilities: - Regression lines, circles, points, radii, angles, coordinates - Nominal/actual comparison - DXF import (optional) - Tolerance monitoring - Automatic program runs Included Components: - CD 120 drive unit - ST 500 measuring stand with granite plate (700 × 550 mm) - MCP 23 manual control panel - CT 120 XY table with rotary adjustment - Calibration kit - 17" TFT monitor Machine status: Operational

Condition: used, Year of construction: 2008, functionality: fully functional, MEASURING ARM FARO FUSION Year of manufacture: 2008 Measuring range: 2400 mm Software: Polyworks (please download the current version from the Polyworks website, ours is for Win XP) Dongle for the software is present and included Accessories: measuring spheres, tools, spare battery, cables, charger, and original transport case Last calibration: 2020 REV 26.8 Single point: 0.0510 mm Volumetric: 0.710 mm Further details can be found in the pictures Hfjdpjxmrymjfx Adwob

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, ABERLINK Axiom too 600, coordinate measuring machine. Made in the UK, year 2013, resolution 0.5µm – optimal temperature 18-22°C. Win 10 PRO. Excellent condition. Regularly serviced and calibrated. Inspection possible by appointment. Hfedox Sykyspfx Adwob

Condition: excellent (used), Catalogue No.: 7810 TECHNICAL DATA max working width: 630 mm Hsdpsxwykbsfx Adwefb max working height: 110 mm 2 units: 1) grooved rubber roller for calibration 2) grooved rubber roller for calibration + pad + metal roller *from above: metal feed-in slip roller unit metal slip roller unit metal slip roller *from below: 2 metal slip rollers feed belt 2 metal slip rollers pneumatic belt oscillation 2 feed speeds motor: 2×7.5 kW electric table elevation operating pressure: 6-8 bar extraction port diameter: 2x160 mm overall dimensions (L/W/H): 1650x1060x1970 mm weight: 972 kg – Polish manufacture – 2 units – unpainted – very good condition – used sander Net price: 25,900 PLN Net price: 6,160 EUR (at exchange rate 4.2 EUR) (Prices may fluctuate with significant currency changes)

Condition: used, mileage: 48,904 km, power: 355 kW (482.67 HP), first registration: 02/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2025, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, navigation system, soot filter, STANDARD SPECIFICATION Mechanical cab suspension Adaptive Cruise Control with FCW and AEBS-3 Lane Departure Warning System Goodyear RR, not applicable Euro 6 emission class TraXon automated transmission, 12 gears Standard component layout Left-hand fuel tank DAF Connect Powertrain Plus Warranty - 3 years - 300,000 km Options Rear power take-off switch, version 2 Sleeper High Cab Front chassis version: no floor plate Exterior sun visor Signal horns, 1 set LED headlights and fog lights LED skylights Two LED headlights for rear cab wall Rear window: double-glazed No front mirror DAF Corner View Rear view camera, prepared Central locking, 3 keys, 2 remote controls Adjustable Short roof spoiler, Sleeper High Cab Roof spoiler color: Crystal White Leather steering wheel Dashboard finish: Plateau Cab interior trim: Argenta Door trim: Loosely woven fabric Driver's seat: Super Air Armrests on both sides of the driver's seat Passenger seat: Cinema andamp, table, fabric cover Refrigerator and drawer Extra Comfort mattress for lower bunk Upper bunk Protective net on both bunks Curtains with divider Automatic cab climate control Roof hatch with electric operation Accessory power supply: Standard 2x 40 A ECAS remote control with extended functions FMS connector, extended and prepared Toll preparation Digital tachograph, VDO 1C, version G2V2 Speed limit setting: 90 km/h Tachograph calibration DAF Infot. Exclusive pre-installed, luxury speakers Antennas: DAB-prepared, radio, 2x mobile antennas. GNSS Extra: CB Wireless Charger Rear View Alarm Turn Assist Ready Front: 8.00 t, Parabolic, 165 N Rear Axle 2, 8000 kg, Load Index 156 Axle Load Monitoring Leaf Spring Suspension, Front: Medium Front Axle(s): 385/65R22.5 Driven Rear Axle(s): 315/80 R22.5 2nd Driven Rear/Trailing Axle: 385/65R22.5 F1,385/65R22.5GO KMAXS2 160/000 K Steering BBA R1,315/80R22.5GO KMAXD2 156/150 L Traction DCA R2,385/65R22.5GO KMAXS2 160/000 K Steering BBA MX-13 engine, 355 kW/483 hp Cab emblem: 480 ECO performance No automatic idle shutdown Traction assist 15.0 t Rear axle ratio 2.64 Mechanical differential lock ZF Intarder Wheelbase 4.80 m / rear overhang 2.70 m Longitudinal member 310/7.0 mm, with internal adjustment front/rear Exhaust pipe right EAS unit right, horizontal 75 l exhaust tank left 620 l aluminum fuel tank left, height 620 mm Prepared for rear work lights Cross member D137 Rockinger coupling D130 Electrical connection for trailers, 24 V/15-pin Analog body signals and warnings Chassis with analog connection for engine speed control ECAS control CAN J1939 functions in the body connector Application connector product-market combination Application connector for the BB remote control Side marker lights Body mounting method BAM 1, console type B PTO engine rear, 1 o'clock, control without clutch, pump drive 130 A generator, 2 x 210 Ah AGM batteries Battery energy monitoring Dust shield Construction: S 21 with 210 mm frame, 50 mm support blocks (always specify when ordering) Additional container centering in the rear area, without support Hole pattern in the subframe for screw mounting (50 x 50 x 15) Hfedpeui Dycjfx Adwjb Screw-on underrun protection R58.03, hydraulically folds out 850 mm to the rear, final paint finish RAL 7021, including sensor and safety circuit, additional hydraulic section, 2 x 12 mm hydraulic lines to the rear

Condition: new, Year of construction: 2025, control type: CNC control, controller manufacturer: ESA veya LYNCA, laser type: fiber laser, sheet thickness (max.): 30 mm, travel distance X-axis: 4,030 mm, travel distance Y-axis: 2,030 mm, travel distance Z-axis: 120 mm, power: 10 kW (13.60 HP), Working Area: 4000 × 2000 mm (Model 4020) STANDARD FEATURES - CNC-controlled fiber laser sheet metal cutting machine - Stress-relieved, rigid and heavy-duty steel body and bridge structure - Rack and pinion drive system - Laser cutting head with automatic motorized focusing system - Automatic height control sensor - Auto focus distance adjustment during cutting - High precision linear guideways and servo motor system - Advanced touch-screen CNC control unit (Windows-based) - Multi-language supported, user-friendly CNC interface - EtherCAT communication infrastructure - Monitoring of cutting head temperature, pressure, protective glass status, and back reflection - Internal and external machine monitoring camera system - LED status indicators - Fiber laser beam transmission via fiber optic cable (no consumable optics) - Sheet detection and automatic alignment technologies - Fly-cut feature (serial cutting without changing cutting direction) - No Piercing technology for thin sheets - Piercing mode for thick sheets - Fully enclosed cabin design compliant with CE standards - Laser-proof special safety glass - Filtered ventilation system (CNC controlled) - Automatic nozzle cleaning and head calibration - Conveyor-based slag and part removal system - Movable table system Hjdpfox Nqrisx Adwefb - Emergency stop buttons and safety interlocks OPTIONAL FEATURES - Dual-pallet automatic table exchange system - Fiber laser resonator with different power options - Automatic sheet loading system - Automatic part unloading system - CNC-controlled filter unit - Advanced camera-based sheet recognition and nesting system - Additional camera and remote monitoring package - Oil cooler or climate control system - Additional LED illumination in cabin - Special cutting head options - Additional gas control and pressure regulation systems TECHNICAL SPECIFICATIONS (MODEL 4020) AXES - X Axis: 4030 mm - Y Axis: 2030 mm - Z Axis: 120 mm Performance - Acceleration: 2.5 G - Max. axis speed: 150 m/min - Synchronized speed: 210 m/min - Positioning accuracy: ±0.05 mm - Repeatability: ±0.03 mm Table & Loading - Max. table load capacity: 2500 kg - Table exchange time (optional): ~30 sec Laser Power Options - 2 kW / 3 kW / 4 kW / 6 kW / 8 kW / 10 kW Maximum Cutting Capacities - Mild steel: 16 – 30 mm (depending on power) - Stainless steel: 6 – 22 mm - Aluminum: 6 – 20 mm Gas Pressures - Oxygen: 13 bar - Nitrogen: 25 bar - Air: 13 or 25 bar General - Machine weight: ~22,200 kg - Average power consumption: 20 – 70 kW/h (depending on power)

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required Hfedpfxstw S Awo Adweb The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, working width: 2,000 mm, travel distance X-axis: 4,020 mm, travel distance Z-axis: 150 mm, Machine was overhauled in 2024. TECHNICAL DETAILS Working area: 4,020 mm Processing area: approx. 4,000 x 2,000 mm Maximum sheet thickness: 30 mm Maximum steel thickness: 30 mm Laser cutting head: EX-TRABEAM® Pro Laser source: IPG YLS 10000 U fiber laser source Laser power: 10,000 W Power: 10 kW (13.60 hp) Traverse speed: up to 100,000 mm/min Z-axis positioning speed: 18 m/min Z-axis travel: 150 mm Hfodpfx Adewyaxmjwsb Z-axis acceleration: 0.75 G Drilling Drilling range: Ø4 mm – Ø30 mm Holder: HSK-63 Thread cutting range: M5 – M20 Max. material thickness: up to 25 mm Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Drilling tool measurement: automatic MACHINE DETAILS Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Filter system: Donaldson DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Volume flow: 4,500 m³/h Mechanics and Control Drives: maintenance-free Panasonic AC servo motors Measuring system: IRC 2500 (incremental encoder) Hold-down device: pneumatic Chip brush: available Laser hours: 6,900 h EQUIPMENT Documentation/manual Cooling unit Safety light barrier Fully automatic shuttle table Fully automatic HSK 63 drilling spindle Cleaning and calibration station LU3K Automatic nozzle changer with 8 nozzles Donaldson® filter unit DFPRO 6 Cyclopeel Asper Nesting® automatic nesting software Witt gas mixer Maintenance and support contract

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, laser wavelength: 1,080 nm, table length: 600 mm, table width: 600 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, workpiece weight (max.): 500 kg, input voltage: 400 V, type of cooling: water, overall weight: 2,500 kg, total length: 3,500 mm, total width: 3,500 mm, total height: 2,300 mm, warranty duration: 12 months, door opening width: 600 mm, door opening height: 800 mm, height adjustment type: electric, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Laser Cutting Machine with 1.5kW Fiber Laser (New Machine) Our aim is to offer highly precise, long-term stable, yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library and first-class service are included as standard. - Highest precision - Machine bed made of natural stone - Linear motor drives - Axes measured and calibrated with Renishaw measuring system (with certificate) - Pneumatic sheet metal clamping - High-precision cutting machine - 1.5 kW laser source from MaxPhotonic - Finest beam diameter (20µm) Hfsdpfx Adsxbb Ipowjb - Travel range approx. 600 x 600mm - Machine control in German - Incl. nesting module - Very easy to operate - Powerful laser chiller - Table support Leasing or hire purchase possible through our financing partner Sale exclusively to commercial customers. Machine dimensions approx.: Width: 190cm Height: 190cm Depth: 145cm Weight: approx. 2500kg

Condition: used, Year of construction: 2001, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Hodpfx Asxzi S Nodwsfb Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Working height / feed table height: 880 mm Location: Supplier

Year of construction: 2003, condition: used, Manufacturer: Zanchetta Model: Piraña Year: 2003   Type : Calibrator for granulated or wet products Applications: pharmaceutical, food, chemical, cosmetics …   Installed electrical power: 3 kW Power supply : 380V – 3 phases – 50 Hz Motor speed : 1440 rpm Dry air consumption: 15 L/min at 2.5 bars Available basket diameters: min Ø 800µ – max 4500µ Treated product moisture content: max. 10 %. 10 % Noise level: < 85 dBA Hfodpfx Adsx R Dk Isweb Dimensions: 700 x 1500 x 1400 mm Height to drum axis: 900 mm Product infeed diameter : 150 mm Product outlet diameter : 150 mm Control panel with speed variation Paper documentation available

Condition: new, Year of construction: 2025, control type: CNC control, controller manufacturer: ESA veya LYNCA, laser type: fiber laser, sheet thickness (max.): 30 mm, travel distance X-axis: 3,040 mm, travel distance Y-axis: 1,535 mm, travel distance Z-axis: 120 mm, cutting speed: 150 mm/min, positioning accuracy: 0.05 mm, power: 6 kW (8.16 HP), STANDARD FEATURES - Robust frame and bridge structure designed according to high precision criteria - Rigid machine construction verified by analysis - Rack and pinion drive system - Fiber laser resonator (compatible with IPG / Nlight / Raycus) - Fiber laser beam delivered via fiber cable (zero optical consumable cost) - Precitec ProCutter auto-focus laser cutting head - Automated motorized focusing system - Automatic capacitive height control sensor - Lower protective glass (protection against back-reflection and particulates) - CNC-controlled dual-pallet (shuttle table) system - Rigid and high-speed CNC-controlled table exchange - Advanced touch-screen CNC control unit - Windows-based CNC operating system - Multi-language support - EtherCAT communication infrastructure - Program management based on part, job, and material - Fly-cut technology (continuous cutting without changing direction) - No-piercing thin sheet cutting technology - Pierce + cut combination for thick plate cutting - Sheet recognition and alignment technologies - Referencing options - Multi-level password protection system for operator and maintenance personnel - Program upload and network connectivity via CNC - High-resolution in-machine camera system - Remote monitoring via computer and mobile devices - LED status indicators - Laser safety windows (impermeable to fiber laser wavelength) - Automatic nozzle cleaning system - Automatic head calibration - Filtered ventilation and fume extraction system - CNC-controlled filter unit (manual/automatic operation) - Conveyor system (for part and slag removal) OPTIONAL FEATURES - Laser power options: 1 kW – 10 kW - Automated sheet recognition and nesting with camera - CAD/CAM software (Libellula or Lantek) - Automatic/semi-automatic part nesting - Remnant sheet re-nesting capability - Advanced cutting simulation - Time and cost analysis module - Remote service and technical support infrastructure - High-capacity filter unit options Hsdpfx Asx Npl Uodwofb - Automated loading and unloading systems - Additional safety and monitoring packages TECHNICAL SPECIFICATIONS – 1530 MODEL X Axis: 3040 mm Y Axis: 1535 mm Z Axis: 120 mm Acceleration: 2.5 g Max. Axis Speed: 150 m/min Synchronized Speed: 210 m/min Positioning Accuracy: ±0.05 mm Repeatability Accuracy: ±0.03 mm Machine Weight: 16,500 kg Max. Table Loading Capacity: 1,500 kg Table Exchange Time: 24 sec Cutting Capacities (Depending on Laser Power) Mild Steel: Max. 30 mm Stainless Steel: Max. 22 mm Aluminum: Max. 20 mm Gas Pressure Values Oxygen: 13 bar Nitrogen: 25 bar Air: 13 or 25 bar Average Electrical Consumption 15 kW – 70 kW / hour (depending on selected laser power)