Used Cam Milling Machine for sale (91,429)

Condition: good (used), Year of construction: 2016, BG Cam 1325 ATC, Year of manufacture 2016, Siemens 808 D control system, Travel X/Y/Z 1270/2540/150 mm, Nelouhzyqjhccqkswf High pressure vacuum table, Table with 4 zones, Yaskawa servo motor drive, rapid traverse X/Y 35 m/min, rapid traverse Z 15 m/min, Resolution 0.001 mm, repeat accuracy 0.01 mm, Spindle speed up to 24,000 rpm, new spindle 2024, ER 25, 6-station tool changer, linear guides, tool length measurement, vacuum pump, suction foot,

Year of construction: 2010, Condition: ready for operation (used), X-travel: 2520mm, y-travel: 3520mm, z-travel: 160mm, table dimensions: 2500x3500mm, control: CNC Microstep 980, length: 4320mm, width: 3100mm, height: 1820mm, weight: 900kg, including production computer with flat screen and Cenon CAM software, combination cutting/folding device, dust extraction device, industrial vacuum cleaner (1200W, 36l container volume), cooling and spraying device, automatic Z-adjustment, control cabinet, control and simultaneous interpolation of up to 5 axes, true 3D machining possible, continuous path with dynamic, pre-calculation, high machining speed exponential acceleration ramps, 4 digital outputs, 4 digital inputs, spindle interface (digital and analog), connection options are spindle controller, electronic workpiece leveling, automatic Z-adjustment, automatic tool change, automatic tool change, automatically switched tool cooling, safety device, control panel, on-site inspection is possible. Nwsljriwd Njhccqksf

Condition: excellent (used), Year of construction: 2018, CNC control: Fanuc Series Oi-MF New machine, only 150 spindle hours - Flat guideways - Gearbox - Internal cooling - Various tool holders and 1 vise Travel paths X-travel 850 mm Y-travel 530 mm Z-travel 530 mm Nelhccqswa Ip Hokewf Spindle nose (to table surface) 100-630 mm Spindle axis to column surface 590 mm Table Table size 530 x 950 mm Maximum table load 800 kg T-slots (W x NO. x P) 18 x (5) x 100 mm Spindle Spindle speed 8000 rpm Spindle mount BT-40 Spindle power 7.5/11 kW Feed rate Rapid positioning speed 20 / 20 / 20 m/min. Cutting feed rate: 1 – 10,000 m/min. Automatic tool changer Number of tools: 24 Tool taper: BT-40 MAS Tool holder bolt: P-40T (45°) Max. tool diameter: Ø 80 mm Max. tool diameter (no adjacent tool): Ø 150 mm Max. tool length: 250 mm Max. tool weight: 7 kg Tool change time (tool to tool): 2.5 sec Tool change time (chip to chip): 6 sec Machine dimensions: Floor area: 2450 x 2700 mm Machine weight: 6000 kg Max. machine height: 2900 mm Air supply connection: 7 kg/cm2

Condition: used, Year of construction: 1997, operating hours: 60,000 h, Functionality: fully functional, machine/vehicle number: 76, workpiece weight (max.): 20 kg, power: 70 kW (95.17 HP), total length: 6,000 mm, total height: 2,300 mm, air pressure: 6 bar, nominal voltage: 400 V, suction capacity: 12,000 m³/h, total depth: 3,500 mm, 1) Camam machine 1997y - 2x inside x 2x outside moulder (11kW motor) - 2x inside x 2x outside paper sanding (5kW motor) total power 74 kW 2) Camam machine 2002y - 2x inside x 2x outside moulder (11kW motor) Nwolhcjv Unhgscqkef - 1x inside x 1x outside paper sanding (5kW motor) total power 60kW Machine suitable for bended elements (ex backrests), narrow longitudinal elements (legs), pieces height 120 mm, depth 65mm, rotation speed 8m/min

Year of construction: 2020, Condition: as good as new (ex-display), Machine data - Moving gantry with fixed table and moving gantry for minimum footprint Njlhcjhwd Eaecqkjwf - Substructure, bridge and bridge uprights made of steel and welded, stress-relieved and machined in one piece - Main machine assemblies consisting of ribbed welded structures, tuned for optimum stiffness/weight ratio as well as vibration damping and high acceleration - Each machine design is reviewed and optimized using finite element analysis (FEA) to ensure maximum quality, performance and safety - Easily accessible machine table for easy loading and unloading with a forklift or overhead crane - Ground precision guides with high preload and additional cover belt for optimum chip wiping on all axes - Brushless, digital A/C servo motors and controllers on all axes - Double-sided, synchronized drive on X-axis (gantry drive) - Rack and pinion drive on X and Y axes - Precision ball screws with double-sided plummer block units on Z-axis - Precision planetary gears with low backlash - Cable drag chains in closed design to protect the drag chain cables against chips and dust - High-quality shielded drag chain cables provide a high level of safety against malfunctions and failures - Working range X-axis 2,550 mm - Working range Y-axis 1.550 mm - Z-travel 200 mm - Z-travel 280 mm - Web speed Max. 80 m/min. - Network connection via Ethernet

Year of construction: 2005, Condition: ready for operation (used), Table dimensions: 4000x2000mm, connected load: 11kW. Nwolhccqofdr Iiskof

Condition: used, Year of construction: 1995, CAMAM GC6/6F-2L rotary milling machine Nolhccour Htleqkjwf Number of milling units 6, grinding units 2 Maximum width of material 250mm The maximum height of the material 150mm Maximum length of material 1200mm Feed speed adjustable 0-17m/min Machine in the cabin

Year of construction: 2003, Condition: used, SECOND-HAND HIGH SPEED VERTICAL MILLING MACHINE CAMAM MOD. FV/1T-1P - volt. 380/50 - S/N 76 Njlhccqsikz Snekewf - CE year 2003

Year of construction: 2020, Condition: as good as new (ex-display), Machine data - Moving gantry with fixed table and moving gantry for minimum footprint - Substructure, bridge and bridge uprights made of steel and welded, stress-relieved and machined in one piece - Main machine assemblies consisting of ribbed welded structures, tuned for optimum stiffness/weight ratio as well as vibration damping and high acceleration - Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance and safety - Easily accessible machine table for easy loading and unloading with a forklift or overhead crane Nwelhshwd Dnjccqksf - Ground precision guides with high preload and additional cover belt for optimum chip wiping on all axes - Brushless, digital A/C servo motors and controllers on all axes - Double-sided, synchronized drive on X-axis (gantry drive) - Rack and pinion drive on X and Y axes - Precision ball screws with double-sided plummer block units on Z-axis - Precision planetary gears with low backlash - Cable drag chains in closed design to protect the drag chain cables against chips and dust - High-quality shielded drag chain cables provide a high level of safety against malfunctions and failures - Working range X-axis 2,550 mm - Working range Y-axis 1.550 mm - Z-travel 200 mm - Z-travel 280 mm - Web speed Max. 80 m/min. - Network connection via Ethernet

Condition: used, Year of construction: 1999, machine/vehicle number: 99008, SECOND-HAND TRANSVERSAL MILLING MACHINE FOR CHAIR COMPONENTS CAMAM MOD. FS-S/1U - CE RULES - Max tools diam. 200 mm. - Rotation speed giri/1 500 - Motor 3 kw - Exaust hood diam. 100 mm. Nwolhccqoqpdtzekef - Exaust air cosumption m3/h 900 - Volt. 380/50 - S/N 99008 - Year 1999

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, ACTIVE TABLE SURFACE L x W = 6100x 2200 mm - DISTANCE BETWEEN COLUMNS = 2550 mm - DISTANCE BETWEEN CROSS-RAiL AND TABLE =1650 mm - RAM VERTICAL TRAVEL (Z axis) = 1000 mm - MILLING HEAD TRAVEL ON CROSS- RAIL (Y axis) Nolhccjuihttjqkewf a) WORKING TRAVEL =2200mm b) TOTAL TRAVEL = cca 4200mm - GANTRY PORTAL TRAVEL (X axis) = 8000 mm - MILLING PORT-TOOL = 150 50 - ACCESSORiES: a) UNIVERSAL HEAD. b) MILLING EXTENSION. - WEIGHT = cca 60 tons

Condition: used, Year of construction: 1991, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 7,500 kVA, table width: 450 mm, table length: 1,830 mm, rotational speed (max.): 1,800 rpm, Sajo BF 400 DM Milling Machine X 1200 MM Y 700 MM Z 600 MM TWO SPINDLES TILTING SPINDLE HEAD 1 800 RPM Nsljv E Dzkohccqkowf

Condition: used, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,100 mm, total height: 3,250 mm, total length: 4,000 mm, total width: 3,700 mm, table width: 1,000 mm, table height: 820 mm, table length: 1,800 mm, spindle speed (max.): 1,320 rpm, spindle motor power: 7,500 W, spindle mount: MK 5, Milling machine adapted to CNC. Used and in working order. Nolhev Ewm Heccqkewf

Condition: excellent (used), Year of construction: 2020, operating hours: 1,200 h, XYZ 750 LR Vertical Machining Centre (3 Axis) Siemens 828D Control Manufacture & Installed in 2020 Working Table: Working Area 830 x 410mm T Slot Size 3 x 16 x 100mm Maximum Table Load Capacity 500Kgs Nslhcervkn Uscqkowf Machine Stroke: X Axis Travel 750mm Y Axis Travel 440mm Z Axis Travel 500mm Distance from spindle nose to working surface table 100 – 600mm Distance from spindle centre to main column 500mm Spindle: Spindle Taper BT40 Bearing Dia’ Ø60mm Spindle Speeds to 8,000rev/min Feeds: Rapids 20m/min Cutting Feed Rates (XYZ) 1 – 20,000mm/min Linear Rail Slideways Tool Magazine: Capacity 20 Carousel Max’ Tool Weight 7Kgs Tool Change Time (T-T) 8 Secs Drive Motor: Spindle Drive Motor 10HP Coolant 1/4HP Chip Wash 1/4HP General: Door Opening Width: 880mm Overall Dims: 2100 x 2100 x 2655mm Gross Weight: 3500Kgs Supplied with: Siemens 828D Control Renishaw Tool Setting & Probing Remote Electronic Control Handwheel Optimised Digital Servos Rigid Tapping Flood Coolant Worklight 20 Station Carousel Easy Clean Swarf Tray Steel Concertina Guards on all Axis Power Coating Guarding USB Port Compact Flash Drive Card Slot Jet Machinery Stock No: #78752 Machine Serial Number: STP20168 Cost: £34,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10 500 mm Uitgebreid armbereik van de robot (links en rechts): 3045 mm maximale werkstuklengte als het een profiel is: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10 500 x 3045 mm max. werkstukhoogte: 3500 mm Gereedschapswisselaar met 13 posities: - 12 aangedreven gereedschappen - 1 meetsonde Freeskop: -SK40 - 12 kW op spindel / 16 000 tpm - automatische smering Nwelhccqov Sfk Hekof Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit aanpassen naar één werkgebied (voor een groot werkstuk) of opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken.

Condition: new, Functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 1,000 mm, SIX-AXIS CNC DEEP-HOLE DRILLING MACHINE TOOL System:FANUC0i -MF Diameter of the Hole for Gundrill:Φ 4~Φ 35mm Diameter of the Hole for Ejector:Φ 18~Φ 65mm Maximum Depthof the Hole for Gun Drill:1300+500mm MaximumDepth of the Hole for ejector:1000mm Processing Range(from Left to Right )of (X):2000mm Processing Rangeof Sliding Table (Y):1500mm Processing Range of column (Z):1000mm The Rotary Angle of Ram (A):The Spindle Turns upward 20 degrees ,and down to 30 degrees Fast Feed(S.Y.W.Z):10m/min Maximum speed of working table:2r/min Nwelhccqjuip Avekef Maximum speed of Ram:200°/min

Condition: excellent (used), Year of construction: 2014, XYZ SMX 4000 3-Axis CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2014 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 78806 Serial No: 12168 Price: £24,950.00 + VAT Nwslhccqjt R R Abskof Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,600 mm, spindle speed (max.): 4,000 rpm, table length: 6,000 mm, TECHNICAL DETAILS Control: HEIDENHAIN X travel: 4,500 mm Y travel: 1,200 mm Z travel: 1,600 mm Movement and feed rates Feed rate: 5,000 mm/min Rapid traverse X/Y/Z: 15 m/min Table Table clamping area (L x W): 6,000 x 1,000 mm Distance from table to spindle nose with vertical milling spindle: 870 mm Spindle and tool Tool holder: SK 50 Spindle speeds: 67 – 4,000 rpm EQUIPMENT Nslhccqowa Au Dskowf - Accessories - Tools - Holders

Condition: excellent (used), Year of construction: 2020, Functionality: not functional, machine/vehicle number: 222100410, milling height: 150 mm, spindle diameter: 280 mm, milling length: 400 mm, milling spindle speed (max.): 2,800 rpm, No reserve price - guaranteed sale at the highest bid! Nelhccowaa Sysqkewf For milling transom and door profiles made of aluminum and PVC TECHNICAL DETAILS Milling height: max. 150 mm Milling depth: max. 110 mm Milling length: max. 400 mm Profile height: max. 200 mm Milling cutter diameter: max. 280 mm Material stop swivel range: up to 60° to the right and left Drive Milling motor: 2.5 kW Speed: 2,800 rpm MACHINE DETAILS Maintenance has been performed by the manufacturer

Condition: good (used), Year of construction: 1997, Functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 24,000 rpm, controller model: Siemens CNC 840 D, TECHNICAL DETAILS X travel: 3,400 mm Y travel: 2,700 mm Z travel: 1,500 mm Control: Siemens CNC 840 D C-axis rotation range: +400° Nolhccqsv Uqyxokswf A-axis swivel range: +100° Clearance between posts: 2,200 mm Spindle Spindle speed: max. 24,000 rpm Spindle power: 15 kW Tool holder: HSK A63 Tools & Pallets Tool changer positions: 20 Number of pallets: 2 Pallet size: 2,500 × 1,400 mm EQUIPMENT - Gantry design with 5 axes

Condition: good (used), Year of construction: 2013, operating hours: 11,427 h, Functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS Type: Horizontal drilling and milling machine (T-table design) Control: CNC Heidenhain iTNC 530 Travel paths X-axis travel: 3,500 mm Y-axis travel: 2,000 mm Z-axis travel: 1,250 mm Table Table dimensions: 1,800 × 2,200 mm B-axis: 360° continuous rotary table Nslhccjwc Ryaoqkswf Spindle Spindle speed: 3,000 rpm Spindle diameter: 130 mm Table load: 12 t Feed rate Working and rapid traverse speed: 10 m/min Cooling system Internal cooling through spindle: 20 bar (CHOV 20) External cooling: available MACHINE DETAILS CNC system switched on: 41,414 h Total machine runtime: 40,471 Program runtime: 9,805 Spindle runtime: 11,428 Runtime with increased spindle speed: 70 h EQUIPMENT - Blum TC60 touch probe - Heidenhain DNC - Through-spindle cooling - Continuously rotating rotary table - No chip conveyor

Year of construction: 2014, Condition: ready for operation (used), General Data Measurements width 11484 mm Nslhccqswctz Hjkowf Measurements depth 36500 mm Measurements height 9100 mm Machine weight 172000 kg Control Unit Brand FANUC Model 31i B Main Drive Spindle speed range 2500 RPM Spindle motor power 37 kW Tool taper BT-50 Media Chip conveyor Yes Additional Equipment Auto Tool Changer (ATC): 90 Tools / Auto Angle-Head Changer (AAC): 2 Units (2) AAC Units: (1) Extension Head (L = 600 mm)/ (1) 90° Right Angle Head (L = 350 mm, Index = 5°) Hydraulic Pump & Coolant System / Coolant Through Spindle (30 BAR) External Coolant Unit 4-Axis Linear Scales This 5-axis HNK HPM 30M gantry milling machine was manufactured in 2014. Ideal for complex and precise milling tasks, it offers enhanced flexibility and accuracy. Consider the opportunity to buy this HNK HPM 30M gantry milling machine. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Manufacturer: Prvomajska Model: AG-400 CNC Control system: Siemens Sinumerik 840D Spindle power: 9 kW Table size: 800 × 500 mm Travel ranges: Nslhcjwfrriscqkjwf X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm

Condition: good (used), Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS Control: HEIDENHAIN iTNC 530 X travel: 6,000 mm Y travel: 1,200 mm Z travel: 2,000 mm C-axis: 0.001° (preparation) Movement and Dynamics Rapid traverse X/Y/Z: 30 m/min Table Table clamping area (L x W): 7,500 x 1,100 mm Table load: max. 5,000 kg Spindle and Tool Spindle drive power: 60 kW Spindle speeds: 6,000 rpm Tool holder: SK 50 Tool changer: 60 Accuracy Positioning accuracy: ±0.030 mm Repeatability: ±0.010 mm Head and axis options Automatic Universal swivel head: 1° × 1° Nslhccowakxqsqkewf 4th axis preparation: rotary table EQUIPMENT - Automatic universal swivel head - Accessories - Tools - Mounting fixtures - Preparation for rotary table (4th axis)

Year of construction: 2019, Condition: ready for operation (used), General Data Measurements width 1600 Measurements depth 7550 Measurements height 1450 Machine weight 5500 Main Drive Main motor power 4000 W / 5.5 PS Additional Equipment 2 carbide saw blades for aluminum and plastic Diameter: 420 mm, number of teeth: 96 Saw blade cooling equipment Small stop for the stationary head Profile lifting bars for the stationary and moving head Work piece support that can be moved on the machine bed Two cutting and oversize cutting software solution Software connection to production preparation program Nslhccsubfk Hsqkowf Pneumatic clamping unit, horizontal Roller track mounted on a moving head 1.5 meters, 300 mm wide General Data Measurements width 1600 Measurements depth 7550 Measurements height 1450 Machine weight 5500 Main Drive Main motor power 4000 W / 5.5 PS Additional Equipment 2 carbide saw blades for aluminum and plastic Diameter: 420 mm, number of teeth: 96 Saw blade cooling equipment Small stop for the stationary head Profile lifting bars for the stationary and moving head Work piece support that can be moved on the machine bed Two cutting and oversize cutting software solution Software connection to production preparation program Pneumatic clamping unit, horizontal Roller track mounted on a moving head 1.5 meters, 300 mm wide This 3-axis Elumatec SBZ 131 pipe saw was manufactured in 2019. It features a 7.2-meter cutting length, 4-axis control for precise aluminum and steel processing, and a revolver head with storage for 8 tools. The machine ensures operator safety with a light barrier and protective grid. It's ideal for complete profile processing without moving the raw material. Buy this Elumatec SBZ 131 pipe saw for efficient and accurate work. Contact us for further details regarding this pipe saw. Application Types Milling