Used Can Seamer for sale (26,925)

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data Rcjdpfx Aez Dv Uysirjh - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: used, Year of construction: 2003, machine/vehicle number: M338, Used Crown Bevcorp 40 valve filling monoblockTechnical Specifications & Performance DataThis used can filling monoblock combines a Bevcorp UB40 rotary can filler with an Angelus 61H seamer, delivering dependable performance for industrial packaging and beverage production. The system is configured for aluminum cans and is supplied with tooling for multiple can body styles. It is an excellent option for a second hand solution within a used bottling line where reliability and ease of integration are essential.Filler model: UB40 rotary can fillerFiller valves: 40Seamer model: 61HOverhauled in 2019Containers: Aluminum cans (standard and sleek)Ends: 202 can endsSpeed: 20.000 BPHConfigured can sizes: 12 oz (approx. 0.355L) and 16 oz (approx. 0.473L)Included components: Can transfer conveyor, electrical panel, lubrication panel system, stainless steel mechanical safety guarding, handling parts, operator manualElectrical: 480 V, 3 Ph, 60 HzNitrogen dosing: Vacuum barrier nitrogen dosing systemCondition: Used – good; regularly maintainedAdvanced Automation & Control SystemsThe monoblock includes an integrated electrical panel to manage coordinated operation of the filler and seamer. Safety interlocks and stainless steel safety guarding support operator protection during beverage production. Variable speed drive elements are supported by a dedicated lubrication approach for reliable operation under continuous duty. Quick access to guarding and panels facilitates routine adjustments and preventive maintenance in industrial packaging environments.Production Line Integration CapabilitiesDesigned to operate inline with upstream and downstream equipment, this filler–seamer block integrates smoothly into a used bottling line or a new beverage production layout. The included can transfer conveyor simplifies synchronization between the 40-valve filler and the 61H seamer. Existing handling parts and tooling accommodate both standard and sleek aluminum cans with 202 ends, supporting efficient format changes between 12 oz and 16 oz. The monoblock can operate as part of a complete packaging machinery setup alongside depalletizing, rinsing, coding, and case packing systems.Machine Condition & Maintenance HistoryThe equipment is described as used – good and has been regularly maintained. Mechanical safety guarding, lubrication panel, and operator manual are included, indicating a machine that has been cared for and kept in service-ready condition. This makes it a strong second hand choice for plants seeking to expand or refresh beverage production capacity with minimal downtime.Operational Performance & VersatilityEngineered for flexibility, the monoblock is capable of running carbonated and non-carbonated beverages. The 40-valve filler supports steady throughput and consistent fill accuracy, while the Angelus 61H seamer is recognized for robust end application and seam integrity. The vacuum barrier nitrogen dosing system enhances product quali... Rcjdpfx Aozcf Idsireh

Year of construction: 2008, condition: used, functionality: fully functional, suction capacity: 4,000 m³/h, Oil mist extraction unit for CNC machines, ScandMist MA 400D filter separator. Rcodsz R Rlvepfx Airoh Fan with a power of 7.5 kW. Inlet diameter: 315 mm. Capacity: 4000 m3/h. The unit is equipped with a frequency converter. Several units of this device are available (the price stated is for 1 unit). The ScandMist filter is one of the most efficient oil mist and oil fume filters in the world. It has very low maintenance requirements and can operate for several years without filter replacement, which results in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency and can operate continuously without interruptions. The liquid collects at the bottom of the filter and can be reused for operation. These units use a 3-stage mechanical filtration process. Stock number: 1176 (3/3)

Condition: used, Can filler for beverages, manufacturer: KHS, model: 4 SVF 120 / D, for 80,000 cans/hour with 0.33 l cans for carbonated soft drinks, with can seamer, manufacturer: Angelus, model: 121 L (202), year of manufacture: 1991 Rcedpfeyzhl Rjx Airjh

Condition: used, Year of construction: 2018, Overview This compact automated can filling line was manufactured with main equipment from KHS, Ferrum, Ska Fabricating and Atlanta. The line is designed for beverage can production and includes depalletizing, can transport, ionized air rinsing, filling, seaming and downstream film / shrink packaging. The core of the line consists of a KHS Innofill Can C filling system combined with a Ferrum FC03 can seamer. The system is integrated with overhead and floor-mounted can conveyors and is arranged in a compact production layout. Rjdpfx Aoy Tt H Dsiroch Technical Data - Manufacturer / main equipment: KHS / Ferrum / Ska Fabricating / Atlanta - Line type: Automated can filling line - capacity: 15.000/h - Number of filling valves: 21 - Number of seaming heads: 3 - Container type: 330ml, 440ml, 500ml standard can - Packaging type: loose cans into 12 & 24 trays and WA boxes - Year: 2018 - Operating hours: 3,446 h - Layout: compact canning line layout with overhead and floor-mounted conveyor sections Scope of Delivery - Can Depalletizer | Ska Fabricating Co. | – | Enclosed depalletizing system with safety guarding | 2018 - Can Conveyor System | KHS / AE | – | Overhead and floor-mounted conveyor network for empty cans and line transfer | 2018 - Ionized Air Rinser | Ska Fabricating Co. | AV-C500 | Empty can rinsing / cleaning module before filling | 2018 - Can Filler | KHS | Innofill Can C | Automated can filling system | 2018 - Fill level detection | Heuft | - - Can Seamer | Ferrum | FC03 | Rotary can seaming unit | 2018 - Can dryer | Air control industries | 2018 - Labeller | Pack Leader Advanced Dynamics | Pro-516 | Labelling machine incl. roller feed | 2018 - Case Packer | Atlanta | Rafaello 726 | packaging system | 2018 - Case Packer Printer | SATO | S86-EX | 2018

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H34008-HW, Welding System for Frame Welding of Tinplate Cans with Comprehensive Peripheral Equipment! The new price of the machine was CHF 800,000! The system comprises the following components: - Can Man X7-300 WeldCenter (Serial no.: H34008-HW) - Sheet Transfer and Storage System PowerFEED (Serial no.: H31723) & PowerSTORE (Serial no.: H31503) - Induction Oven PowerCURE (Serial no.: H33620-HS) - Goudsmit Magnetics Palletising Magnet TPLC12804 - BASCO Leak Tester PRE 1024 GLX - Hyfra SIGMA 28-S Chiller Further configuration details can be found in the attached document. Can Man X7-300 WeldCenter TECHNICAL DETAILS (according to manufacturer) - Production output: 100 – 600 pcs/min - Strip speed: 10 – 100 m/min - Sheet thickness: 0.10 mm – 0.28 mm Can body dimensions: - Min. can body dimensions: Ø 52 x 50 (height) mm - Max. can body dimensions: Ø 153 x 320 (height) mm Goudsmit Magnetics Palletising Magnet TPLC12804 TECHNICAL DETAILS - Product diameter: 65 mm – 230 mm - Product weight: max. 5 kg - Pallet size: 1,200 x 800 mm MACHINE DETAILS - Magnet dimensions: 1,226 x 826 mm Pneumatics: - Working pressure: 6 – 8 bar - Air consumption: 8 L/stroke Ambient temperature: -20°C to 40°C Robot interface: Available Vacuum system: Integrated EQUIPMENT - Interface for robotic arm - Integrated vacuum system for handling sheets between can layers - Perforation pattern for robotic arm - Magnet plate (2x) - Vacuum connection (1x) - Pneumatic tubing (3x) - Sensor connection box Hyfra SIGMA 28-S Chiller MACHINE DETAILS Dimensions & Weight: - Dimensions (L x W x H): 715 x 715 x 1,554 mm - Weight: 210 kg Rcsdpfx Aisymxlqerjh EQUIPMENT - Tank volume: 120L - Scroll compressor - Stainless steel frame construction - Automatic water make-up - Bypass valve - Water level indicator - Pressure gauge in water supply - Dry-running protection pump - Ball valve for tank drainage - Fault indication with digital display - High-efficiency condenser - Metal filter cells

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Rcedpfszlqu Tsx Aireh Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: used, Year of construction: 2019, Overview  Rcodpoyudacefx Airsh This isobaric can filling monoblock was manufactured in 2019 by Italy GAI. The GAI MLE 6661 CAN is designed for filling beverages into cans. The machine is already dismantled and stored and is available immediately. Technical data  - Capacity: up to 1,600 cph (33 cl); output up to 650 L/h - Formats: 33 cl standard, 33 cl sleek, 50 cl standard - Application: Can filling - Configuration: Linear monoblock with 6 rinsing valves, 6 filling valves, 1 single-head lid seamer, weight control with expeller, cans washing tunnel, lids storing columns - Lid format: CDL202 - Can diameter: 50 mm – 85 mm

Condition: used, Manufacturer : Indosa Origin : Suisse Year: 1990 (completely upgraded in 2006 with Siemens PLC)   Main machine: Indosa Matic 100 automatic seamer Filling / dosing: AW7/500 module Vacuum / dust collector: CK-V09 system Accumulation table: ZT800 Transport: 12-station star wheel Product feed: pneumatic transfer   Machine type: Automatic filling and sealing line for cans Box type: metal or composite Applications : Dry and granular products Examples: Tobacco, powder, granules, dry foods, solid products Rcsdsx R Dypopfx Aireh   Capacity: up to 40-50 units/min (integrated speed control) Can diameter Ø 80 mm standard (other sizes available on request) Box heights from 20 to 320 mm Dosing type : Weight (vibrator + bucket) Product supply : Pneumatic transfer Metal cover seaming, integrated seaming module Vacuum Integrated dust collection module CK-V09 Lid storage feeder : Yes Automatic control   Documents available in digital format.   Status / Additional information: video available in operation

Condition: used, Year of construction: 2007, Overview This complete can filling line was manufactured mainly in 2007 and is designed for the filling of beer, carbonated soft drinks and other carbonated beverages in aluminium cans. The line has a capacity of approx. 6,000 cans per hour and is suitable for several can formats, including 250 ml slim, 330 ml sleek, 330 ml standard and 500 ml standard cans. The line includes depalletizing, carbonation, filling and seaming, tunnel pasteurization, tray packing / shrink wrapping, conveyors and control system. The equipment is still installed, currently out of production and available for inspection in Northern Europe. The layout shows a compact line arrangement with depalletizer, filler / seamer, tunnel pasteurizer and downstream packaging area. Technical Data - Line type: Complete can filling line - Capacity: approx. 6,000 cans/hour - Main year of manufacture: 2007 - Application: Beer, CSD and carbonated beverages - Can formats: 250 ml slim, 330 ml sleek, 330 ml standard, 500 ml standard - Packaging: 3x4 or 4x6 trays with shrink foil - Filling / seaming: Monoblock 16/4 - Control system: Siemens SIMATIC S7-300 - Condition: excellent condition - Status: still installed, currently out of production - Location: Northern Europe Inspection: possible anytime Rcodpfx Aezh Ifusiroh Scope of Delivery - Can Depalletizer | TMG Impianti | – | Included with conveyors | 2007 - Carbonator | Comac | Carbonator 1 Column | - | 2007 - Filling & Seaming Monoblock | MCD Bottling Solution / Comac | Can Filler 16-4 P.164.85 | 16 filling valves / 4 seaming heads | 2007 - Tunnel Pasteurizer | Comac | Tunnel Pasteurizer | 2007 - Tray Packer / Shrink Wrapper | Dimac | Star One | For 3x4 and 4x6 trays with shrink foil | 2007 - Can Conveyors | Various | – | Complete conveyor system included | 2007

Condition: used, Year of construction: 2018, machine/vehicle number: LC592, Used complete CSD canning line 2018 - 24.000 bphTechnical Specifications & Performance DataThis complete CSD canning line is a second hand, used bottling line configured for aluminum cans and engineered for reliable beverage production. Manufactured by ZhongChen, the line is designed to deliver consistent quality for carbonated soft drinks at industrial packaging scales. It features a comprehensive equipment set from mixing through downstream wrapping, enabling smooth, continuous operations.Production Speed: 24,000 bphContainer Type: Aluminum cansAvailable Volume Range: 0.33LProduct: CSD (carbonated soft drinks)Build Year: 2018 (major equipment)Main Equipment: Mixer, Filling Machine, Can Seamer, Can Rinser, Can Warmer, Shrink Wrapper, Depalletizer, Conveyor System, COP SystemManufacturer: ZhongChenAdvanced Automation & Control SystemsThe line is arranged for synchronized operation across the primary processing and packaging stages. A centralized control approach ensures coordinated start/stop, accumulation management, and fault handling, providing stable throughput at rated speed. Operator interfaces are designed for straightforward format adjustments and routine production tasks. Safety interlocks and guarding support secure operation while enabling efficient maintenance access.Production Line Integration CapabilitiesThis production line is configured for inline operation, from primary product mixing through filling, seaming, rinsing, and secondary packaging. Conveyor systems provide smooth transfers and buffering between machines to maintain optimal flow. The 0.33L can format is supported across the entire line, with provision for standard format changeover procedures. The layout is compatible with typical upstream syrup preparation and downstream palletizing solutions to form a complete beverage production and industrial packaging system.Machine Condition & Maintenance HistoryThe line is reported as still on line, indicating it remains installed and in use at the time of documentation. The 2018 build year across key machines suggests modern engineering and contemporary safety design. Routine maintenance and serviceability are facilitated by straightforward access points and standard components common to ZhongChen packaging machinery. Operating hours are not specified.Operational Performance & VersatilityOptimized for CSD processing, this used bottling line supports consistent carbonation retention and gentle product handling through filling and seaming. The can rinser and warmer modules help ensure product quality and downstream pack integrity, while the shrink wrapper forms stable packs ready for palletizing. Quality control is supported by stable handling and synchronized transfers to minimize scuffing and deformation, contributing to dependable second hand beverage production results.Installation Requirements & Site PreparationThe line is arranged as a modular set of machines connected by conveyors, allowing flexible placement within a suitable production hall. Standard utilities expected for beverage lines apply, including electrical power, compressed air,... Redpfxjydc Tto Airsch

Condition: good (used), functionality: fully functional, power: 75 kW (101.97 HP), gearing type: automatic, fuel type: gasoline, first registration: 04/2025, next inspection (TÜV): 04/2027, color: grey, front tire size: 205/75 R 14, rear tire size: 255/60 R 14, machine/vehicle number: 3JB3PA768SJ001247, Equipment: lighting, trailer coupling, our vehicle number #31076 ATTENTION: Sale only to commercial customers!!! Euro V 102 hp 4x4 Tire sizes A1 205/75 R 14 and A2 255/60 R 14 Permissible total weight 788 kg Payload 225 kg Unladen weight 563 kg Tank capacity 19 liters Color: Mineral Grey/Orange Aluminum rims Differential lock CVT transmission with pDrive primary clutch Disc brake HD3500 winch Passenger seat Skid plate full set CanAm Integrated heated grips LED light bar Footrest kit G3 LinQ front luggage rack SP Connect cell phone holder incl. charging cable Digital onboard computer Front/rear bumper guards Trailer hitch ball head Three-stage dynamic power steering (DPS) Modes: Work / Standard / Sport Intelligent engine braking (iEB) 7.6-inch wide digital display Financing possible upon request!!! Rodoz I Rpaopfx Airjch

Condition: used, Year of construction: 2017, Overview Complete automatic canning line for beer by American Beer Equipment (ABE), built around the LINCAN 35 inline can filler and seamer. The line runs from the can depalletizer through the twister rinser, atmospheric filling and lid seaming to the air knife dryer. It is fully operational, with maintenance up to date and the latest software installed. Technical data - Year of manufacture: 2017 (LINCAN 35) - Capacity: rated 35 cans/min on 0.33 L cans; about 1,500 cans/h in production - Can formats: 0.33 L and 0.44 L in use; compatible with 0.355, 0.375, 0.5 and 0.568 L cans - Filling: atmospheric, for beer at about 3 °C, CO2 purge of each can before filling - Utilities: compressed air at 100 psi (approx. 7 bar), CO2 at 60 psi (approx. 4 bar) - Cleaning: CIP function started from the HMI - Control: touchscreen HMI with daily, weekly, monthly and lifetime can counters - Construction: stainless steel Scope of Delivery - Can depalletizer | Norland | YELLOW JACKET | for aluminium cans up to 24 oz, pallets 56 x 44 in with tier sheets, approx. 340 kg, footprint approx. 2.7 x 2.7 m with conveyor, height approx. 3.5 m - Twister rinser | inclined can twister with rinsing - Atmospheric can filler | LINCAN 35 | 7 inline filling nozzles with level probes, CO2 purge - Can seamer | LINCAN 35 | seaming unit upgraded, retaining bar added on the lid feed - Drying unit | air knife on the discharge conveyor - Documentation | operator manuals, printed and PDF Condition Fully operational and in very good condition, inspected in production. Maintenance up to date, software updated, seaming and lid feed improved. Rcjdpfez Hziuox Airsh Availability Immediately. Location: Spain.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 0990200191, For sale is a professional Canon Colorado 1650 UVgel large-format printer for industrial roll-to-roll printing. The machine is in good used condition with typical signs of wear and tear. It can be switched on and displays the status "Ready" on the control panel. IMPORTANT: A test print could not be performed as no printing material is currently available. Therefore, the actual printing function and print quality, as well as the condition of the print heads, could not be fully verified. Technical data * Manufacturer: Canon * Model: Colorado 1650 * Printing technology: UVgel * Maximum material width: 1,625 mm * Printing inks: CMYK (Canon UVgel 460) * Print resolution: up to 1,800 dpi * Matte and gloss printing via FLXfinish+ Redpfx As Agu Hkeirsch * Automatic material feed with dual roll system * Professional roll-to-roll large-format printer Operating hours according to display * Material consumed: 29,559.7 m² * Material length: 20,835.9 m * Actually printed area: 22,664.1 m² * Total ink consumption: 247.554 liters The counter readings are documented in the pictures. Condition and features The machine is in good external condition. The mechanics, roll guide, control panel, and ink supply can be seen in the photos. Four Canon UVgel-460 ink containers (CMYK) are included. No definitive statement can be made about the current fill levels. A complete functional test was not possible due to the lack of printing material. Therefore, the machine is sold expressly as a used device, with the printing function unverified, in its current condition. The machine is of particular interest to advertising technicians, printing companies, large-format printing businesses, or as a source of spare parts. Collection and transport Due to its size and weight of approximately 740 kg, professional collection and suitable transport are required.

Condition: used, mileage: 4,81,117 km, power: 368 kW (500.34 HP), first registration: 01/2022, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 3,950 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,160 mm, total width: 2,550 mm, Equipment: AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, navigation system, parking heater, retarder, seat heater, traction control, = Additional Options and Accessories = - Distance control cruise control - Remote central locking - Air suspension - Engine brake - PTO - Radio - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater = Notes = COC document. Scania R500 4x2 Full air suspension. Retarder. Adaptive cruise control. 2 x fridge. 2 x diesel tank: 700 liters + 500 liters. Adjustable fifth wheel. HMF 1920 K4 4 x hydraulic extension. Scanreco radio remote control. 4.50 m - 3,740 kg. 6.40 m - 2,500 kg. 8.40 m - 1,840 kg. 10.50 m - 1,430 kg. 12.70 m - 1,170 kg. = Further Information = Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steered; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 75%; Tire tread depth left outer: 75%; Tire tread depth right inner: 75%; Tire tread depth right outer: 75% Weights Rjde Agg Dvopfx Airech Unladen weight: 8,633 kg Payload: 11,867 kg GVW: 20,500 kg Functional Crane: HMF Identification Model number: Scania R500 4x2 HMF 19 tm CRANE = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2161, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, input current: 12 A, operating pressure: 10 bar, Equipment: documentation/manual, The machine has seen little use and is in very good condition. It is a 6-station inline machine that tests the entire can. Therefore, it is suitable for 3-piece cans. Aerosol can format sets: 35mm, 45mm, 50mm, 53mm diameter. Documentation and instructions from Bonfiglioli are available. I also still have some spare parts and various valves. However, I am open to price offers. Rcedpfj Abaurjx Aireh

Condition: like new (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, type of input current: AC, total length: 3,000 mm, total height: 1,80,01,500 mm, input voltage: 220 V, overall weight: 300 kg, compressed air connection: 6 bar, year of last overhaul: 2022, air pressure: 6 bar, product height (max.): 150 mm, For sale: a lightly used can sealing machine for composite cans / cardboard-wrapped cans, set to a can diameter of 72 mm; the height is adjustable. Sheet metal lids are fed onto the cans via a magazine and crimped. The clamping jaws are new and can be finely adjusted as required. The conveyor belt speed and sealing speed can be set automatically via the control panel. Average Rcedpfxszh Ebtj Airjh cycle time is 30–40 cans per minute. The machine is made entirely of stainless steel and is ready for use. Rated voltage 220 volts.

Condition: good (used), Year of construction: 2017, functionality: fully functional, total width: 850 mm, total length: 1,320 mm, total height: 2,165 mm, For hazardous waste press into drum Rcjdpfx Ajz Tg Droirsh

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Frey CLB CAN Portioning Machine for Minced Meat Manufacturer: Frey Maschinenbau GmbH Model: CLB CAN Rjdpfx Aisyah U Usrech Machine number: CLB 1471527 Year of manufacture: 2017 Power supply: 230 V, 50/60 Hz Power: 0.50 kW Conveyor belt: plastic Belt width: (2×) 300 mm Working clearance: 300 × 70 mm Overall dimensions of main unit: 2050 × 700 × 1750 mm Included in the set: 2 portioning devices plastic conveyor belt belt width: 300 mm knife width: 235 mm dimensions: 680 × 550 × 1730 mm 680 × 550 × 1470 mm The Frey CLB CAN portioning machine for minced meat is a modern and precise device designed for portioning various types of meat masses. Thanks to its compact design, it can be flexibly integrated into a production line and easily relocated between workstations. The machine ensures even and accurate portioning of products with differing consistencies, maintaining high portion repeatability. The plastic conveyor belt is easy to clean and meets the hygiene requirements of the food industry. The Frey CLB CAN portioning machine is ideal for the production of minced meat portions, burgers, or other formed meat products.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: DV 800, type of input current: three-phase, input voltage: 400 V, operating pressure: 6 bar, input current: 16 A, We offer this used Stiller DV 800 semi-automatic can seaming machine with a work table, manufactured in 2020. According to production records, approximately 30,000 cans have been sealed. Serial number: 20089 Cans: Diameter 40-99 mm, height 20 - 150 mm (seaming unit included) Year of manufacture: 2020 Weight: 140 kg Voltage: 230/400 V Current: 16 A Frequency: 50 Hz Power: 0.6 kW Compressed air: 3.4 m3/hour at 6 bar. Cans in 2 different heights, including lids (approximately 6,000 pieces each), are available for the installed seaming unit. Installed seaming head (replaceable) up to 99 mm, chuck (replaceable) exactly 60 mm. Compressed air, including air dehumidifier, is required for operation. The option to purchase an air compressor and air dehumidifier, including couplings and connecting hoses, is available. Redpfx Aiez I Ty Isrsch Forklift/ramp for loading is available. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2016, condition: used, machine/vehicle number: AT65, Technical Specifications & Performance Data The PakTech CCA 120 is a compact, high-reliability can holder applicator designed to apply plastic carriers to beverage cans with consistent accuracy. As part of a used bottling line or canning line, this second hand unit brings proven PakTech engineering to industrial packaging environments seeking dependable multipack presentation. Manufacturer: PakTech Model: CCA 120 Year: 2016 Machine type: Can Holder Applicator Nominal speed: up to 120 cans per minute (format and line conditions dependent) Container types: Aluminum beverage cans Formats: Compatible with common PakTech carrier styles and multipack configurations (subject to tooling and kit; verify in manuals) Dimensions: Width 2440 mm, Length 1230 mm, Height 1500 mm Electrical: 220V Safety features: Integrated guarding and protections Documentation: Manuals available Advanced Automation & Control Systems Engineered for continuous, reliable operation in beverage production, the CCA 120 delivers automatic carrier application synchronized with upstream and downstream conveyors. An operator-friendly control interface and robust logic control typical of PakTech systems support straightforward setup, monitoring, and troubleshooting. The 220V electrical configuration simplifies integration into existing packaging halls, while comprehensive safety guarding and interlocks protect operators during operation and changeover. Emergency stop circuitry, safety shields, and clear access points are designed to meet modern industrial packaging practices. The included manuals support parameter configuration, maintenance, and format adjustments. Production Line Integration Capabilities Rcede Adyxcspfx Airoh This applicator is ideal for positioning downstream of can rinsing and filling, after seaming/capping and labeling/coding, and before case packing, palletizing, or tray loading. It integrates seamlessly with conveyors and control signals on a used bottling line and is suitable for second hand systems handling a variety of beverage SKUs. Changeovers between carrier formats are supported with appropriate tooling, enabling agile response to production needs for beer, cider, soft drinks, energy drinks, water, juice-based RTDs, and similar products. While optimized for aluminum cans, the applicator complements broader lines that may also process PET and glass containers upstream in filling, labeling, capping, and rinsing stages. Machine Condition & Maintenance History Condition is in storage, with the machine currently disassembled. Safety features are included, and manuals are available to facilitate re-commissioning. Assorted spare parts are noted as available. As with any second hand equipment, inspection and verification of specific format kits, wear parts, and controls are recommended prior to integration into your industrial packaging environment. Operational Performance & Versatility The CCA 120 is designed to apply PakTech-style carriers accurately and gently, promoting product stability and consistent pack appearance. Its compact footprint makes it ...

Condition: repair required (used), functionality: not functional, mileage: 7,53,555 km, power: 353 kW (479.95 HP), first registration: 11/2007, fuel type: diesel, empty load weight: 14,240 kg, maximum load weight: 18,260 kg, overall weight: 32,500 kg, tire size: 385/65 R 22.5, axle configuration: 8x4, wheelbase: 3,750 mm, axle spacing: 3,750 mm, next inspection (TÜV): 04/2027, fuel: diesel, fuel tank capacity: 500 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro4, suspension: air, number of seats: 2, total length: 9,000 mm, total width: 2,550 mm, total height: 3,200 mm, loading space length: 6,500 mm, Year of construction: 2007, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, compressor, cruise control, differential lock, electric window regulation, fog lights, onboard computer, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, spoiler, tachograph, trailer coupling, truck registration, Model: SCANIA R480LB 8X4*4HHA ENGINE FAILURE! 3-Pedal JOAB L24 Steering + Lifting Axle ENGINE FAILURE, the engine is defective, mechanical failure. First registration: 30.11.2007 Mileage: 753,555 km (original) Engine power: 353kW Engine displacement: 15,928cm³ Hydraulics (PTO) Auxiliary heater Antennas Radio/CD/MP3/USB Automatic climate control 1x air-suspended seat with seat heating and fully adjustable Electric windows Electrically adjustable exterior mirrors Multi-function steering wheel Speed limiter (89 km/h) Sun visor Work lights Fog lights High beam Hazard warning lights Toolbox Aluminum fuel tank Tank capacity: 500L diesel Pollutant class: EURO 4 Retarder/Intarder/Engine brake Transmission: Opticruise (automated) Vehicle overall dimensions (length x height x width): 900cm x 320cm x 255cm Body: 650cm Unladen weight: 14,240kg Payload: 18,260kg Permissible total weight: 32,500 kg Differential lock Wheel formula: 8x4 Wheelbase axle 1 and 2: 3,750mm Wheelbase axle 2 and 3: 1,360mm Wheelbase axle 3 and 4: 1,310mm Tire size axle 1 (front): 385/65 R 22.5 Tire size axle 2 (rear): 315/80 R 22.5 Tire size axle 3 (rear): 315/80 R 22.5 Tire size axle 4 (rear): 385/65 R 22.5 Air suspension / Air suspension Wheel arch Our vehicles are generally listed with a valid TÜV (technical inspection) and emissions test certificate. As a rule, these are foreign test certificates, but they are sufficient for issuing export license plates. For a valid TÜV and emissions test according to German standards, please contact us in individual cases. You can also reach us via WhatsApp, Telegram, Viber, and Signal for more information and pictures. We ask that you call or send a message via WhatsApp directly! German (Deutsch): We speak German and English, but feel free to send us a message in your language! English (English): We speak German and English, but feel free to send us a message in your language! Español (Spanish): Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Português (Portuguese): Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! Français (French): Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue ! Italiano (Italian): Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Русский (Russian): Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! Trade-in possible! Price is final price, VAT not shown. We can transport your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can arrange worldwide shipping for you! Export license plates on request! We support you with the export, original data confirmation for country homologation, supplier declaration, preparation of export documents and customs license plate production, if required. An inspection and test drive can be arranged at any time, even on weekends, by telephone appointment. Rcjde Agpiwspfx Airjh Disclaimer: The buyer is obliged to independently verify the condition, dimensions and equipment of the goods/vehicles. All information is without guarantee. Subject to change, prior sale and errors.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, We are offering this ready-to-use Cask 3 Head Fill Station filling technology, manufactured in 2023. Number of filling heads: 3 Filling capacity: 25 cans/minute Redpfxjzzmfao Airoch Hourly capacity: 63 cases/hour Dissolved oxygen level: 15 - 20 ppb Footprint dimensions: 7’ x 2.5’ Footprint area: 17.5 ft² If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, mileage: 4,16,437 km, power: 368 kW (500.34 HP), first registration: 05/2022, fuel type: diesel, empty load weight: 8,720 kg, maximum load weight: 35,280 kg, overall weight: 44,000 kg, tire size: 355/50 22,5, tire condition: 60 %, axle configuration: 6x2, wheelbase: 2,800 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2022, operating hours: 4,16,437 h, front tire size: 355/50 22,5, rear tire size: 355/50 22,5, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, onboard computer, parking heater, sliding door, soot filter, truck registration, Vehicle number for inquiries: 41739 Scania, R 500 * Year of manufacture: 2022 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Automatic climate control * Air suspension * Navigation system * Lift axle * Particle filter * Retarder / ZF-Intarder * Power steering * Auxiliary heater * Stationary air conditioning * Cruise control * On-board computer * Differential lock * Low noise * Long-haul transport > 7.5 tons * Steerable front axle * 2 x diesel tanks * Lane change warning system * Transmission type: Automatic * Suspension: Air / Air * Gross vehicle weight: 44,000 kg * Tare weight: 8,720 kg * Payload: 35,280 kg * Permissible gross vehicle weight: 44,000 kg * Tire condition 1st axle: 60% - 60% - Tire size: 355/50 R22.5 * Tire condition 2nd axle: 60% - 60% - Tire size: 355/50 R22.5 * Tire condition spare tire: 60% * Wheelbase: 2800 mm * Tire sizes: 355/50 R22.5 * Scania R 500 6x2 * Cab: CR 20H * Technical GVW: 70,000 kg * Leading and lift axles * Air-suspended front axle * Fifth wheel height: 1050 mm * Retarder * Scania stationary air conditioning * Rain sensor * 2 x 300-liter tanks * LED daytime running lights * LED taillights * Exclusive instrument panel * Navigation * Night lock * Tire pressure monitoring system * 220V voltage converter * Blind-spot camera Redpfs Af Hbyex Airoch Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists; we will be happy to advise you.

Condition: used, mileage: 3,30,450 km, power: 279 kW (379.33 HP), first registration: 12/2006, fuel type: diesel, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2006, TITLE: USED SCANIA P380, SKIP LOADER, FULL PNEUMATIC, 6X2 REF: 26C60 YEAR: 12/2006 HORSEPOWER: 380 ENGINE CAPACITY: 11705 EURO STANDARD: 5 KILOMETERS: 330450 TRANSMISSION: Allison automatic DIFFERENTIAL LOCK: yes RETARDER/INTARDER: yes (Allison) AXLES: 3, 6x2 WHEELBASE: 4100 TOWING CAPACITY: yes ORIGIN: foreign CABIN: short and low NUMBER OF SEATS: 2 PAYLOAD: 14,750 kg - TRACTOR UNIT: 26,000 kg at full load - TRACTOR UNIT + TRAILER: 44,000 kg BODY TYPE: skip loader SKIP LOADER MODEL: PALIFT 26.52 EXTENSION: yes SWIVEL: yes ROLLER: no ADR: no BODY DIMENSIONS: FROM: 3.40 m + 0.20 m TO: 6.00 m + 0.20 m OVERALL LENGTH: 7.90 m OVERALL LENGTH WITH CONTAINER: 8.00 m + 0.80 m extendable bar ACCESSORIES: - 0.80 m extendable bar - rear clamps - hydraulic lines for crane - rear-view camera - electronic weighing system - without bell - tires 315/70 REFURBISHED: no INSPECTED: yes Rsdpe Agxlfefx Airjch TIRE CONDITION: 30% PRICE: 39,500.00 € + VAT. Subject to errors and/or omissions. The prices listed do not include VAT. Please contact the sales representative for an updated price and conditions comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA SKIP LOADERS operates in the sector of sales and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers, and skip loader equipment. With a readily available fleet of over 50 trucks and over 150 bodies, containers with and without cranes. S.E.&O Given the quantity of advertisements and details included, Aurora invites you to verify the accuracy of the data with the sales staff.