Used Carriage Belt for sale (11,001)

Condition: used, onveyor belt 3 meters, belt conveyor, conveyor line, belt-type conveyor, used machine Overall dimensions: Width: 3010 mm Depth: 370 mm Height: 1000 mm Bledpfsyiai Tjx Agkjd Electrical data: 400V; 0.37 kW; 1.01 A Belt size: 2970 x 115 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 592 h, Calibration and fine sanding automatic machine, wide belt sander with electronic segmented sanding pad and lacquer sanding capability A video of the machine in operation can be provided upon request. Ideal sanding machine for interior finishing workshops, also suitable for intermediate lacquer sanding. Single-belt machine with combination unit and electronic segmented pressure beam; edge segments can be switched on and off. Segment width of the pressure beam: 35 mm Contact roller can be pneumatically adjusted, low wear thanks to grooved steel roller Abrasive grain compensation Drive motor 7.5 kW with automatic motor brake, infinitely variable belt speed, frequency controlled from 2 to 18 m/s Feed belt can be continuously adjusted via frequency inverter from 2.5 to 13 m/min Pneumatic, workpiece-controlled belt blow-off device Cleaning brush at the exit Constant working height of 900 mm by adjusting the machine upper section, allowing integration into sanding lines Feed belt still very grippy and in excellent condition Maximum sanding width approx. 1090 mm Workpiece height approx. 3 to 150 mm Common abrasive belt size: 1120 x 1900 mm 3 rubberized pressure rollers Infeed roller table and foldable outfeed table Prepared for vacuum blower. The conveyor is perforated and a plug for an optional blower is available. Alternatively, the conveyor can also be connected to the extraction system. Extraction connections: 1 x 180 mm, 1 x 140 mm, and 2 x 100 mm Terminal control with 50 programmable sanding programs for automated machine operation. Parameters: belt speed, feed speed, workpiece height, pressure beam engagement points front and rear, edge segments, belt blast nozzle, optional vacuum blower, pneumatic setting of the calibration roller. CE mark Operating manual without the power cable shown Original paint, only partial touch-ups Approx. 592 operating hours, i.e., around 40 minutes per week. Dimensions approx. 1800 (with table 2600) x 1800 x 2150 mm (LxWxH). Weight approx. 2200 kg. Bjdpfx Agsym Du Rskeld The machine can be demonstrated on our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this supplier."

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total height: 2,202 mm, total length: 3,900 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 4,200 kg, working height: 96 mm, conveyor belt speed: 250 mm/s, input current: 54 A, conveyor belt length: 6,800 mm, For sale: robust Houfek Final 1100 brush sanding machine in DBB configuration (rotary brushes + 2 rollers). The machine has seen very little use. Offered fully equipped (brushes, abrasive paper). Testing is possible—removal from the current location is planned for the end of March. Immediate sale possible. Bjdpfsyngcysx Agkjld

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, conveyor belt length: 1,000 mm, conveyor belt width: 600 mm, overall weight: 50 kg, Here we offer a fully functional counting conveyor belt (conveyor belt with infrared counting sensor – digital counter). Manufacturer: M-Fördersysteme Year: 2007 – lightly used 16A connection Bsdpfxjxz Rvvj Agkjld 6 units available

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Conveyor belt in top condition, immediately available at our warehouse in Hanover (we have 2 identical units available) Manufacturer: Frasch Inclined length: 1200 mm Flat length: 800 mm Width: 400 mm / approx. 350 mm usable Price: €1,000.00 net per unit Designation: Manufacturer Frasch FA-LH800/LA1200 x B400 Bodpfsxrv Ursx Agksld

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Technical Main Data - Grinding width: 1,350 mm - Working height: 900 mm (constant) - Workpiece thickness: max. 150 mm - Abrasive belt width: 1,370 mm - Segment grinding shoe - Weight: approx. 3,000 kg Drives 1st unit: 15–18.5 kW, belt speed 18 m/s 2nd unit: 11–15 kW, belt speed 18 m/s Contact roller diameter: 140 mm (combi unit) Bjdpoxmwn Aofx Agkold Feed: - Feed belt system: length 3,400 mm, width 1,350 mm - Feed drive: 0.7/0.9 kW (2 speeds) - Feed speed: infinitely variable, 2.5–13 m/min Extraction - Air velocity: min. 20 m/s - Machine resistance: approx. 800 Pa Compressed Air: - Operating pressure: 6–8 bar - Air consumption: approx. 28 l/min

Condition: ready for operation (used), working width 950 mm calibrating unit with metallic roller combination unit with rubber roller and automatically engaged shoe star-delta start pneumatic oscillation controlled by photocells two conveyor feed speeds motor power 11 kW year of manufacture 2000 power supply 400V weight 975 kg Blodpfx Agoynh Scjkod

Condition: used, Szállítószalag, futószalag, szállító pálya, Használt gép Befoglaló méretek: Szélesség: 1540 mm Bsdpoyh H U Tjfx Agksld Mélység: 720 mm Magasság: 1500 mm Elektromos adat: 400 V, Heveder méret: 440 x 290, 550 x 290, 460 x 290

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 3945, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries Bjdeyn Rgvspfx Agkjld

Condition: good (used), V-belt pulley, belt pulley, double wheel pulley, variable pitch roller, V-belt pulley with variable pitch -V-belt pulley: Roller V-belt pulley with variable pitch -Adjustment range: 17 - 35 mm -Hole: Ø 28 mm Bedpfx Aoymb Emegkeld -Dimensions: Ø153 x 72 mm -Weight: 5.1 kg

Condition: used, Year of construction: 2005, length 3400 mm width 710 mm Blodsylzwmopfx Agkod speed 20 m/min power capacity 0,75 kW weight 0,35 t dimensions (WxLxH) 0,95 x 3,4 x 1,6 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck width of magnet approx. 650 mm

Condition: used, Conveyor belt, belt conveyor, belt conveyor, belt conveyor MFP Fördertechnik Machine No: 20083 Year of manufacture: 2021 Usable length: 2800 mm Belt width: 360 mm Usable width: 300 mm Belt length: approx. 5800 mm Frame profile construction height: 70 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 48 m/min Conveyor belt height: approx. 1150 mm Motor power: 140 Watt Power supply: 230 Volt, 50 Hz - Stepless belt speed via potentiometer on ROFRE frequency converter, type 897 - Right-left run Bsdpfx Agswqg Enekold - Belt drive via INTERROLL tube motor - Stable steel sheet construction with closed steel plate under the conveyor belt - 1 piece height-adjustable substructure with hand crank, conveyor belt height approx. 1000 to 1200 mm - Substructure mounted on steel plate length 500 mm x width 500 mm x thickness 30 mm - 1 piece fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 2880 x 500 x 1150 mm Weight: 200 kg good condition

Condition: used, Conveyor belt, belt conveyor, small-part conveyor belt GURA Year of manufacture: approx. 1992 Conveyor length: 2200 mm Usable length: 2170 mm Belt length: approx. 4700 mm Belt width: 220 mm Return roller diameter: 32 mm Return roller diameter under the belt: 50 mm Blsdpfx Agow E Nwveksd Drive roller diameter: 80 mm Belt speed: approx. 20 meters/min. Overall height: approx. 1000 to 1100 mm Motor power: 0.18 kW Power supply: 400 Volt, 50 Hz - Driven by geared motor - Adjustable incline - Height-adjustable metal base frame - Rubber conveyor belt worn - Mobile on 4 fixed castors Overall dimensions L x W x H: 2200 x 550 x 1100 mm Weight: approx. 80 kg

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Bodpfx Agji Huzxskeld Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Bedpfephvl Tjx Agkeld Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: excellent (used), Vertongen M-300 Combi Throughfeed Sander Bedpsyhn S Ajfx Agkeld Working width: 300 mm Working height: up to 200 mm Combi unit with pad Pneumatic oscillation Manual raising and lowering of the work table Two feed speeds Main motor: 5.5 kW Abrasive belt: 300x1900 mm Weight: approx. 600 kg

Condition: good (used), Year of construction: 1996, Hema Profile Grinding Machine Type PSM 300, year 96, with base frame HEMA PSM 300 Universal Profile Grinder - Automatic belt tensioning Bljdpfx Ageyl Ilwokjd - Tool-free, fast belt change within seconds - Standard internal grinding with same belt length - Quick-change system for grinding bars - Cast iron table, 450x450 mm, tiltable up to 45°, zero stop and scale - Motor 1.1 kW, 2800 rpm - Very quiet operation - Maximum grinding height 300 mm, grinding bar height inside 200 mm, outside 250 mm - Switch with undervoltage release - Extraction port 60 mm - Connection for industrial vacuum cleaner

Condition: excellent (used), Through-feed sander Tornado Euro 300 Working width: 300 mm Working height: up to 180 mm Bsdjyhltkspfx Agkeld Combi unit with pad Main motor power: 4 kW

Condition: good (used), Code: 0303 Brand: BIESSE ARTECH - ITALY Model: LEVIA 330 - CE Standard Automatic 3-belt calibrating sanding machine for a perfect finish, for carpentry, furniture, custom-made furnishings, panels, wooden doors, wooden window frames and various - CE Standard Technical data: Sturdy structure Electronic belt tracking system Electronic height display Automatic feed belt tracking Automatic table lifting Automatic positioning of work table Infeed and outfeed roller conveyors Working width 1350 mm Min/max working thickness mm 3-200 Abrasive belt dimensions mm 1370 x 2150 Variable belt feed speed with inverter Composition: Bledpfxeylyrpo Agkod 1° Calibrating Roller Group 2° Sanding Roller Group 3° Finishing Roller/Pad Group - Oscillating blowers for belt cleaning Pneumatic on/off on operating units Electronic programming with Easypro 2000 C control N° 2 motors (main motor 11 Kw) Compressed air 6-7 bar Overall dimensions mm 1700 x 1880 x 2200 h Weight kg 2200

Condition: excellent (used), Catalogue number 7717 TECHNICAL DATA - Workpiece length: 2780mm - Workpiece width: 800mm - Main motor: 4.2kW - Grinding belt width: 150mm - Right/left rotation - Electric table height adjustment (up/down) - Extraction nozzle diameter: 180mm - Overall dimensions (L/W/H): 4000x1520x1540mm - Weight: 637kg ADVANTAGES – Not repainted – Electric table adjustment – Used sander, in very good condition Bjdeyh Upxjpfx Agksld Net price: 9500 PLN Net price: 2260 euros depending on the exchange rate, 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: repair required (used), functionality: not functional, total width: 2,000 mm, total height: 1,900 mm, total length: 1,900 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 2,000 kg, grinding height: 160 mm, height adjustment type: electric, type of input current: three-phase, grinding belt length: 1,900 mm, Specification: • Condition - used, requires repair • Manufacturer - Sandingmaster • Model - SCSB-2-1100 • Working width - 1100 mm • Sanding thickness range - 3-160 mm • 2 sanding units: - First: calibration roller, hard rubber, diameter 270 mm - Second: finishing sanding pad • Dust-removal brush at the outfeed • Main motors: 2 x 11 kW • Conveyor speed adjustable via variator • Analog thickness gauge for the sanded workpiece • Pneumatic anvil oscillation • Original paintwork • Abrasive belt size - 1100 x 1900 mm • Weight - approx. 2000 kg • Overall dimensions: 190 x 200 x 190 cm (L x W x H) Additional information: • Very good, factory-level technical and visual condition • Machine after complete seal replacement • Photos show the actual condition of the item for sale • Possibility to power on and inspect the machine on site • The auction price does not include VAT or transport costs Bsdpoyl I Rgofx Agkeld Financing and transport: • We arrange transport via MDD fleet, courier companies, or external carriers • Financial support available through leasing or lease loan

Condition: used, Conveyor belt, belt conveyor, timing belt conveyor, small parts conveyor presumably RÖWE type 2050 x120 Year of manufacture: approx. 2010 Usable length: 2050 mm Belt length: approx. 4450 mm Belt width: 120 mm Frame profile height: 50 mm Return roller diameter: 52 mm Belt speed: 3.3 m/min. Motor output: 0.09 kW Power supply: 400 Volt, 50 Hz - Driven by WEG geared motor - Belt body made of aluminium system profile with 10 mm profile slot, suitable for standard T-slot nuts Bsdpfoylma Tex Agksld Overall dimensions L x W x H: 2100 x 240 x 220 mm Weight: 37 kg in good condition

Condition: used, Conveyor belt, belt conveyor, timing belt conveyor, small goods conveyor belt MK MASCHINENBAU Type 2400 x 85 Year of manufacture: approx. 2010 Bsdpfx Asxtq D Rjgkeld Usable length: 2400 mm Belt length: approx. 5100 mm Belt width: 85 mm Frame profile height: 50 mm Return roller diameter: 30 mm Belt speed: 6.5 m/min. Motor power: 0.18 kW Main connection: 400 Volt, 50 Hz - Drive via ATB geared motor - Belt body made from aluminium system profile with approx. 7 mm profile groove, suitable for standard T-nuts Overall dimensions L x W x H: 2420 x 180 x 300 mm Weight: 21 kg Good condition

Condition: excellent (used), Wide belt sander SCM Sandya CLK + Vacuum Working width: 1100 mm Working height: 3–160 mm Number of sanding units: 2 Calibrating roller: rubber-coated Combi unit with sanding shoe Main dual-speed motor: 12/15 kW Optical oscillation Satin-finish brush at machine outlet Bsdeyhfnnjpfx Agkeld

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Motorized conveyor belts in widths of 400 mm and 800 mm, available as infeed belts, outfeed belts, and general conveyor belts for Minipack packaging machines of the Pratika series, Modular series, etc. Bjdpfxjyaqn Rs Agkeld