Used Centerless Belt Grinder for sale (9,806)

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Dodpfx Aasitvkuj Nskl Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: new, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Sanding belt width/length mm: 1,370/2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" skew-grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (on/off) for automatic engagement/disengagement of the sanding roller sanding pad unit - Activation of segments via electronic control, which synchronizes their operation with feed speed and manages the number of active segments based on the workpiece geometry, allowing selection of more or fewer segments to the left or right of the workpiece. Dedpjhtuvrofx Aa Njkl Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar at infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4” display with ‘eye S’ software integration NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top CE Incl. special grinding shoe Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. Dkodpfx Aasv D H Sij Nel (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Belt sander LANGZAUNER Type LZG Sanding table dimensions approx.: 2500 x 800 mm Sanding belt dimensions approx.: 6800 x 150 mm Motor power approx. 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of the sanding belt Sanding belt cover on top Light bar for the work area CE Incl. special sanding pad Incl. extraction fan NEW GRAPHITE CLOTH Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! Djdpfx Aeuxnyusa Nskl - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, OTT MEGAtronic 11 Lacquer Wide-Belt Calibration and Fine Sanding Machine 1st sanding unit: calibration roller, diameter 150 mm, 90° Shore 2nd sanding unit: electronically controlled, segmented membrane sanding pad Working width: 1100 mm MEGA – Lacquer sanding package Feed speed steplessly adjustable: 3–15 m/min Motor power, 1st sanding unit: 11 kW Motor power, 2nd sanding unit: 11 kW, with 2nd belt speed of 4.5 m/sec Additional special equipment: Vacuum table Vacuum generator 3 kW Abrasive belt oscillation Rigid sanding shoe for solid wood and frame sanding Machine is WORKSHOP-OVERHAULED, in TOP CONDITION, from a crafts business Dodpfx Asy Nl Skea Nekl Available from stock in Lieboch

Year of construction: 1986, condition: excellent (used), I sell Profile Grinding Machine Reckmann LM 161. Grinder in very good condition, little used. Dkodpouyg Rnefx Aa Njl

Condition: good (used), I sell centering grinder strodkowa, in bdb condition. Dsdpfxjvbwvmo Aa Nokl

Condition: excellent (used), Precision grinder for cutting ejectors to size and grinding fronts Dkjdpfx Aajvyuw Ss Nel Grinder features: A precise device enabling semi-automatic cutting of ejectors to size and grinding fronts in one clamping The grinder can be adjusted during operation The belt tension can be adjusted and controlled automatically (the greater the resistance, the tighter the belt) Grinder for cutting ejectors and grinding fronts Grinder for cutting ejectors and grinding fronts Manufacturer code 100 Grinder parameters: Motor power - 0.735kW Max. speed - 3 600 rpm Diameter range - ⌀1-25 mm Maximum length - 300 mm (optionally 500 or 600 mm) Length tolerance for ⌀25x300 mm: +/- 0.01 mm Dimensions LxWxH: 430x360x500 mm Weight - 109 kg Link to the video on YouTube:

Condition: excellent (used), Knife grinder MVM model PX1000 with tilting magnet mm 1000 long, 5 KW grinding wheel motor Dksdpfx Aasy N Dt To Nsl

Condition: used, machine/vehicle number: 008012, Overall length: 6600 mm Overall width: 2150 mm Dsdpfxey Nkqlo Aa Njkl Loading compartment length: 2900 mm Loading compartment width: 1400 mm Cutting shaft power: 37 KW

Year of construction: 2026, condition: new, Mill for fine grinding of flour, coffee, dried vegetables, spices and more.. grinding range from 20-120mesh. capacity 100-400kg per hour. engine speed 3400 per min. machine weight 600kg. The power needed to operate the machine is 11kW. The machine has an additional dust filtration extraction. The whole machine is made of SUS304 stainless steel. PayPal payment available!!! Dodpfx Aaok S Rpuj Nokl

Condition: excellent (used), OMAB/Comec curved part grinder Working width 200mm Sanding belt oscillation Pneumatic material clamping Main motor 5.5kw Feed motor 0.25kw Extraction stubs 2x100mm Dimensions of the machine 210x80x150cmH Weight 450kg Dkodjtvfmhepfx Aa Nel

Condition: excellent (used), functionality: fully functional, Double-sided grinder Grützmacher GSP10 Working width: 200-1000 mm Working height: 230 mm Dedpexmgrqjfx Aa Njkl Number of units: 2 Mechanical oscillation of sanding belts Pneumatic head approach Grinding motor power: 2×7.5 kW Oscillation motor power: 2×0.15 kW Sanding belt: 2500x250 mm Exhaust ports: 2x140 mm

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 867721275, The HOBART PREMAX FTPi 2-S-AN-R-DS6 (Premium specification) is a high-performance industrial flight-type dishwasher designed for maximum capacity and efficiency in large-scale catering operations (e.g., commercial kitchens, canteens, catering services). Hobart dishwashers make use of various energy-efficient technologies, primarily employing heat pump technology (HP) for drying and energy savings. Heat Pump for Drying: Certain Hobart models feature heat pump technology that heats the drying zone and enhances energy efficiency. Waste Water Heat Recovery: Waste water heat recovery utilizes the energy from hot wastewater (60 °C) to preheat the incoming freshwater to up to 40 °C before it enters the boiler. Drying & Energy: By using heat pumps (HP), energy from the surrounding environment is used to heat the drying air, which significantly reduces energy consumption. Advantages: These technologies result in lower operating costs and improved energy efficiency. Thanks to its extensive equipment, this machine has a power rating of just 27.8 kW—a remarkable figure for a unit of this class. This guarantees continuous, long-term savings in operating costs. The unit was dismantled by Hobart factory service. The system comes from a renowned industrial operation in the elevator construction sector, and became available due to the reconstruction of the entire industrial complex. Projected availability: kW 23 Commissioning will also be carried out by factory service (subject to cost participation), which ensures warranty coverage. You will receive a fully refurbished, fully functional flight-type dishwasher, with commissioning and introduction service provided directly by Hobart factory service. Highlights of the PREMAX FTPi Series SENSOTRONIC Wash Intelligence: The machine automatically adjusts consumption (water, chemicals, energy) based on soil level and dishware volume. LOW-CHEM Detergent Saving System: Lowers detergent consumption by up to 80% by using a dedicated pre-wash zone and water regeneration. CLIMATE-PLUS Energy Saving System: The integrated heat recovery system lowers energy costs. Automated Processes: Includes a tray and cutlery lifting magnet for efficient washing. Model Designation Breakdown: FTPi: PREMAX flight-type dishwasher (Intelligent) 2: Number of wash zones (two) S: SENSOTRONIC (wash intelligence) A: Automatic Operation N: Standard entry zone R: Work direction right-to-left DS6: Below are the key technical specifications and features of this particular model, based on manufacturer information: Technical data: • Capacity: Designed for high plate throughput (over 5,000 plates/h in S configuration) • Water consumption: Approx. 130 – 160 l/h (depending on setting/load) • Orientation: R (right-to-left operation: entry right, exit left) • Machine type: Flight-type dishwasher • Model: Premax FTPi 2-S-AN-R-DS6, FHP • Heating: Electric • Voltage: 400 V Dsdpfx Aaoy N N Ice Njkl • Mains: 3-PE • Protection: 3 x 50 A • Power: 27.8 kW • Serial No.: 867721275 • Year of manufacture: 2019 • Wash zones: S Prewash/Wash/Rinse/S Drying • Overall length: 685 cm • Discharge: 100 cm • Conveyor width: 44 cm • Conveyor height: 61.2 cm • Height: 190 cm • Height with door open: 215 cm • Width: 68 cm • Exhaust: Climate TE-PRO Subject to changes and errors.

Condition: good (used), Year of construction: 2019, 1 used horizontal grinding machine Manufacturer: Granlund Model: 650 XB Year of manufacture: 2019 Operating hours: 2905 Control system: Fanuc Series 31i - B Technical Data Max. workpiece length (mm): 300 Ring groove diameter (mm): 120–650 Grinding wheel diameter (mm): 356 Grinding wheel width (mm): 75 Quill stroke tailstock (mm): 45 Equipment Automatic grinding wheel dressing device 2 x tailstock Paper band filtration system Oil mist extractor Control cabinet with cooler Grinding wheel balancing stand Dimensions: 3800 x 2800 x 2200 mm Weight: 4500 kg Special Features Deep grinding can be carried out on soft blanks. This means that there is no need to produce or purchase pre-milled can blanks, as the machine completes the entire process. The machine is equipped with an automatic grinding wheel dressing cycle, including automatic compensation for wheel diameter and cutting speed. Dsdpfx Aaoy Nxd To Njkl

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Dkjdpfjphupmsx Aa Nsl -Conveyor belt rollers: transport rollers diameter 56 mm -Transport width: 335 mm -Shaft: recording M8 -Quantity: 17x transport rollers available -Price per piece -Total dimensions: Ø 56 x 345 mm -Weight: 2.6kg/piece

Condition: used, GÜHRING Drill Bit Grinding Machine Type SS 15 Spiral Drill Bit Grinding Machine Serial No. 909 Year of manufacture: approx. 1977 Maximum drill diameter: 40 mm Grinding wheel diameter right: 300 mm Grinding wheel diameter left: 250 mm Grinding wheel width: 40 mm Grinding spindle speed: approx. 2800 rpm Motor power: approx. 2.2 kW Electrical connection: 380 Volt, 50 Hz - Point angle steplessly adjustable - Point thinning device Dksdpfx Aaodzp Tbs Njl - Gear motor for vertical oscillation in front of cup wheel - Diamond dresser holder - Various drill holders - Coolant system Required space (L x W x H): 1200 x 950 x 1550 mm Weight: approx. 1150 kg

Condition: good (used), V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley SPA 180-4 -V-belt width: 13 mm Dkedpfx Aaopid Dks Nol -Receiver: Taper bushing 2517-55 (Ø 55 can be changed) Quantity: 1 piece available -Dimensions: Ø 185 x 65 mm -Weight: 7.6 kg

Year of construction: 1994, condition: used, machine/vehicle number: 41094/30, Technical data: - Manufacturer: Cefla with cross axle - Type: TN/L - Length: 1740 mm - Belt width: 1.400 mm - Total width: 1.600 mm - Height: 950 mm - Year of manufacture: 1994 Dsdpfx Aaoya H Hie Nekl - Feed rate approx. 2 - 8 m/min. - FU control for feed rate 50 Hz - Frequency converter required on site - Location: in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: used, Technical data: - GBT-2000 - Working width 1.300 mm - Total width 1.470 mm - Length: 2000 mm - Used - Feed speed adjustable via frequency converter - Frequency converter not included - Motor power 0.37 kW - Max. load 50 kg/m Dsdpfoya H H Ajx Aa Nekl - Color: RAL 7035 light gray - Voltage fluctuations +/-5% - Location: in stock

Condition: used, Technical data: - GBT-2000 - Working width 1.300 mm - Total width 1.470 mm - Length: 2000 mm - Used - Feed speed adjustable via frequency converter - Frequency converter not included - Motor power 0.37 kW Dodpfx Aasya H H No Njkl - Max. load 50 kg/m - Color: RAL 7035 light gray - Voltage fluctuations +/-5% - Location: in stock

Condition: used, Year of construction: 1994, Max. pass-through height: 160 mm Abrasive belt length 1st unit: 1900 mm Max. working width: 1350 mm Number of belts: 2 1st unit: - Calibration roller, steel design Djdpfx Aasy Naq Ue Nskl - Steel, grooved Abrasive belt width 1st unit: 1350 mm 2nd unit: Combined sanding unit Design of 2nd unit: Roller/shoe Control: Manual control panel Elec./pneu. belt oscillation: pneumatic Infeed height: fixed (upper part moves) Table lift: electro-motorized Table display: mechanical numeric display Working or infeed table height: 900 mm Location: Nattheim

Condition: used, Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending on meat up to 200 kg) Worm, worm housing and closing are completely stainless Dedpfx Aajhzcg Ne Nekl Delivery time: 10 working days after advanced payment

Condition: used, Year of construction: 2013, operating hours: 26,721 h, functionality: unexamined, spindle speed (max.): 12,000 rpm, spindle speed (min.): 2,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 320 mm, table length: 245 mm, table width: 140 mm, SAACKE UW1F Center height: 155 mm Maximum tool diameter: 200 mm Dkjdpfeyma I Hex Aa Njl Maximum tool length: 270 mm X/Y/Z travels: 530/400/320 mm Feeds: 0 – 15 m/min Table size: 245 x 140 mm B-axis: Rotation range: 240° Rotational speed: 180°/s Grinding wheel interface: HSK-E50 Grinding spindle: Speed: 2,000 – 12,000 rpm Power: 16 kW Liquid-cooled A-axis: Rotational range: ± 15 minutes Maximum speed: 600 rpm Spindle bore: 32 mm Axis drives: X/Y: 2 kW Z: 3 kW B: 2 kW A: 3 kW Grinding wheel changer: 4 positions Three stations on the table (max. diameter 125 mm) One station on the tool carrier (max. diameter 175 mm) CNC control: NUM AXIUM POWER with PC and software for: End mills Profile cutters Clamping systems Drills and step drills Roundness regulation 3D collision control Zero point compensation Voltage: 400 V / 50 Hz Operating hours: 23,904 hours Spindle hours: 9,846 hours Scope of delivery: RENISHAW 3D measuring probe mounted on the grinding head Coolant unit Various tools and tool clamping accessories Coolant and filter unit GS Industrietechnik RBAFWT113 ND Coolant filter unit GS Industrietechnik RBAFWT113 ND, year of manufacture 2013 Coolant filter unit BÜCHELE 511006

Condition: used, functionality: fully functional, Tool Grinding Machine Djdpfxeyw N Tue Aa Nekl Manufacturer: DECKEL, Model: S 1 Technical Details Manufacturer: DECKEL Model: S 1 Speed: from 3750 to 7500 rpm Connection: 380 V Machine weight: approx. 400 kg Dimensions (L x W x H): 1.2 x 0.70 x 1.40 m All information provided without guarantee. A powered demonstration is possible at any time in our showroom.