Used Chain Drive for sale (21,866)

Condition: new, A-Drive Technology M644-1340-1208-06MPZ SN:2003004, unused in opened original packaging, 100% functional, scope of delivery as per photos Lhedpfxoi D Ewds Abcsd

Condition: used, Year of construction: 1984, Horizontal stainless steel pressure tanks with cooling jackets, sight glasses, outlet pipes and pressure gauges. Additional title: horizontal, coolable stainless steel pressure tanks Volume: 1050 l Max. working overpressure: 3 bar Length: 2300 mm Width: 860 mm Height: 860 mm Material: stainless steel Position: horizontal Features: cooling jacket, outlet pipe, sight glasses, pressure gauge Lhodpfexykyfjx Abcod

Condition: used, Year of construction: 1985, 2 horizontal stainless steel pressure tanks, each equipped with outlet pipe, pressure gauge and sight glasses. The tanks come with a saddle frame for installation. Additional title: horizontal stainless steel tanks mounted on scaffolding Volume: 1050 l Max. overpressure: 3 bar Length: 2200 mm Width: 800 mm Height: 800 mm Material: stainless steel Ledpfxexykw De Abcjhd Position: horizontal Base construction: with scaffolding for installing the tanks one above the other Features: outlet pipe, pressure gauge, sight glasses

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Lsdpfxstp S E Es Abcshd Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Year of construction: 2011, condition: excellent (used), Lift&Drive 225P electric trolley. Powder coated steel and aluminium construction. Table dimensions: 100 cm x 40 cm. Ledpfx Abof T R Nxecehd Minimum height of the roller table from the base - 67 cm Maximum height of the roller table from the base - 193 cm Nominal load capacity 225 kg. Rear-wheel brake. In addition to the central brake, the trolley also has a directional lock on the rear wheels, making it easier for the operator to guide the trolley in a straight line. P (Professional) trolleys are the largest, most stable, strong and flexible trolleys.

Condition: used, Chain conveyor IDC000113 - total length: 30 m - width: 1 m - height: 850 mm - electric motor: 11 kW Lhedpfsvlc Ngsx Abcsd

Condition: used, Length: 7 m, external width 1030 mm, height 530 mm, 4 chain paths. Lhsdpsv Eagvefx Abcsd

Condition: used, Chain conveyor - IDL000773 - length: 6,1 m - working width: 600 mm - electric motor: 1,1 kW - Chain conveyor with pushers after moulder or resaw. Lodpfx Abjufib Rscohd

Condition: used, Segment length: 5450 mm Length: 5450 mm web width: 2020 mm frame width: 2200 mm Ledpfx Abed Rhgpocjhd Roll diameter: 105 mm roller pitch: 200 mm Type: Zware rollenbaan

Condition: used, Roller conveyor with chain cross conveyor Can be used after resaw. - Electric motor: 1,1 kW - Electric motor: 0,75 kW - Electric motor: 1,1 kW Lhedpei Sdk Sjfx Abced

Condition: used, Length: 7,5 m Electric motor: 1,1 kW each rail Chain conveyor for board packs Lhodpfx Aomrzthjbced - Length: 7,5 m, - Electric motor: 1,1 kW (each rail).

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 23-07-12-045, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 550 mm, table height: 910 mm, cutting width at rip fence: 1,000 mm, The machine is in very good condition with minimal signs of use! The machine was used for processing aluminum. Ledpfxjytpxno Abcohd TECHNICAL DETAILS Maximum blade diameter: 550 mm Cutting width at CNC parallel fence: 1,000 mm MACHINE DETAILS Machine height: 910 mm Motor power: 7.5 kW EQUIPMENT Table extension: (length: 840 mm) Double roller carriage (length: 3,000 mm) 2 pneumatic quick clamps (application range: 0–90 mm) Eye-level control panel Template holder directly at the control unit Increased cutting height including saw blade tilting TIP-SERVO DRIVE CNC angle fence UNO 90 Additional cross slide incl. connection Front support roller Air cushion table Spray device Note: The machine comes from a business liquidation, has been professionally dismantled and placed in storage.

Condition: used, Year of construction: 2018, operating hours: 625 h, 2018 | Genie TZ-50 DC w/Drive (17m) | Used Trailer-Mounted Boom Lift | 625 hours 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 22000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Lhedpfx Ajycy Dgobcsd 34 inspection points 34 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Rust on trailer , all functions operate 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38155 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2017, operating hours: 921 h, 2017 | Genie TZ-50 DC w/ Drive 17.09 m | Used Trailer-Mounted Boom Lift | 921 hours 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Lodpfx Abeyf Dxyscjhd 💰 Buy Now for EUR 17900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 23 inspection points 23 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Considering the age of the machin everything works as it should 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38151 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2017, operating hours: 821 h, 2017 | Genie TZ-50 Hybrid w/Drive (17m) | Used Trailer-Mounted Boom Lift | 821 hours 📍Location: Latvia, Rīga 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 18500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Ledpex Ndgajfx Abcjhd 👷‍♂️ Inspected by an independent expert 27 inspection points 27 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is in overall good condition. The engine was not operational at the time of inspection; however, repairs will be completed prior to sale. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38150 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), functionality: fully functional, power: 85 kW (115.57 HP), Year of construction: 2021, operating hours: 1,033 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, Schaeff TC125 / Adjustable Boom / 1,033 hrs / Power-Tilt Rotator • Manufacturer: Schaeff Terex • Model: TC 125 • Year: 2021 • Operating hours: 1,033 hrs • Power: 85 kW / 115 hp • Engine: Deutz TD 3.6 L4 • Dozer blade • High and low speed settings • Reversing camera • Power-Tilt • Air conditioning • Radio • Central lubrication system • Swing arm • Hydraulic lines for hammer, grab, and shear • Track undercarriage 90% Lhedpfxsywlhue Abcjd • Digging bucket: Lenhoff universal bucket CB10M/SW08 • Total weight: 12,100 kg • Quick coupler • German machine • Immediately ready for use • Top condition, like new • This offer is non-binding and subject to prior sale. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale subject to our terms and conditions.

Condition: good (used), Spur gear block hoist, spur gear chain hoist, manual chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Load capacity: 1000 kg -Max. Stroke: 4800 mm Ljdpfx Aec Rwc Dsbcohd -Dimensions: 280/600/H190 mm -Weight: 38 kg

Year of construction: 1978, condition: good (used), machine/vehicle number: 2252928, load bearing: 500 kg Lhodpfx Aebpgvwebcod number of burden strings: 1 stroe speed: 10 m/min electrical connection: 380 V, 1/0,25 kW weight: 69 kg

Year of construction: 1969, condition: used, machine/vehicle number: 3527849, Load capacity (two-legged): 600 kg Lsdpfx Abob H Iq Hecohd lifting speed: 6 m/min Lifting height: 4 m electr. connection: 380 V, 0,88 kW weight approx.: 40 kg

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Lhjdpfx Abjxwaz Hecsd

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: Standard configuration: - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Lhjdpfx Abjwx Aadjcsd Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Condition: used, power: 36 kW (48.95 HP), fuel type: diesel, Year of construction: 2018, operating hours: 2,306 h, Technical information Steering: skid steer Empty weight: 6.882 kg Make of engine: Deutz Top speed: 7 km/h Functional Lifting capacity: 454 kg Identification Serial number: Z4525XCM-460 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Outrigger Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 6.65x2.29x2.25 Additional information Please contact PFEIFER GROUP for more information Lhjdeyv U N Sjpfx Abcsd

Condition: used, Year of construction: 2023, operating hours: 182 h, power: 35 kW (47.59 HP), fuel type: hybrid, Technical information Steering: skid steer Empty weight: 14.445 kg Make of engine: Kubota Top speed: 5 km/h Functional Lifting capacity: 280 kg Working height: 2.800 cm Identification Serial number: 19/56217 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: Outrigger Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 9.28x2.49x2.7 Ljdpfxoyv Uy Rj Abcehd Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 450 h, machine/vehicle number: Z62M-1621, fuel type: diesel, Weights Empty weight: 10.619 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 2.100 cm Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: Outrigger Max. horizontal reach: 1250 m Transport dimensions (LxWxH): 7.58x2.49x2.9 Additional information Lhedpfxeyv Uy Do Abced Please contact PFEIFER GROUP for more information

Condition: used, side transfer chain conveyor Lhodpfx Abjywb N Ijced