Used Challenge for sale (278)

Condition: used, Year of construction: 2024, machine/vehicle number: 8109, functionality: unexamined, power: 3.5 kW (4.76 HP), input voltage: 400 V, cutting height (max.): 4,100 mm, cutting width (max.): 2,200 mm, rotational speed (max.): 5,800 rpm, total length: 5,000 mm, total width: 1,150 mm, total height: 2,980 mm, overall weight: 675 kg, Digital display for horizontal and vertical cuts, scoring unit, automatically adjusting slat bed, plate transport rollers, continuous small-part support, strip stop. Nwjdpfx Aezvngbsd Iek The condition can be seen in the attached expert report.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, pass-through height: 160 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Nwsdpfxswnr A Ho Ad Iok Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: used, Year of construction: 2013, operating hours: 17,000 h, functionality: fully functional, I am selling a Challenger LT-42 / Microcut LT-42 industrial CNC lathe, manufactured by Buffalo Machinery Co. Ltd. – Taiwan, recognized for its reliability, rigidity and precision in production. Model: Challenger LT-42 / Microcut LT-42 Manufacturer: Buffalo Machinery Company Limited (Taiwan) Year of manufacture: 2013 Power supply: 400V / 3 phases Installed power: 20 KVA Technical specifications: Nodpfx Ajzwgzaod Iowk Maximum turning diameter: 210 mm Maximum turning length: 460 mm Bar capacity: 42 mm Spindle speed: up to 6000 rpm Hydraulic chuck: 6” / 3 jaws X-axis travel: 215 mm Z-axis travel: 520 mm Rapid speed X/Z: 30 m/min Main motor: 11 / 15 kW Inclined bed: 30° heavy-duty Features: Automatic turret manual pulse generator Hydraulic chuck Adjustable hydraulic quill Automatic lubrication System cooling CE Robust construction, ideal for continuous production High precision and reliability Made in Taiwan Suitable for workshops and factories looking for a serious CNC lathe Well maintained machine Can be viewed and tested

Condition: used, Year of construction: 2002, machine/vehicle number: 4606221, SECOND-HAND WIDE BELT SANDER VIET CHALLENGE MOD. 211/B RR - CE RULES - Working widht mm. 1100 - 1st rubber roller diam. 180 mm. - 2nd rubber roller diam. 250 mm. Njdpjwrn N Dsfx Ad Iswk - Vacuum - Belt dimensions mm. 2620x1130 - Motor Kw 18 - S/N 4606221 - Year 2002

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, wire diameter (max.): 0.33 mm, overall weight: 3,600 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis AGIE Agiecut Challenge 2 wire EDM machine was manufactured in 2002. It has a weight of 3600 kg and operates at a power of 9 kVA. The machine includes additional equipment such as an ICS Cool Energy i-Chiller external cooling unit and a standalone operator console terminal with screen, keyboard, and mouse. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Agiecut Challenge 2 machine we have for sale. Contact us for further details. Nodpfozpa Abex Ad Iewk - Voltage: 3 x 400 V- Frequency: 50 Hz- Power: 9 kVA- Rated Current: 15.2 A- Additional Equipment: ICS Cool Energy i-Chiller external cooling unit mounted on wooden pallet- Additional Equipment: Standalone operator console terminal with screen, keyboard, and mouse

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Nedpozrd Tvefx Ad Iewk

Condition: ready for operation (used), Year of construction: 2014, operating hours: 25,915 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 650 mm, This 3-axis MICROCUT V-30 Challenger was manufactured in 2014. It features a Heidenhain 530 control system and a high spindle speed of 18,000 rpm. The machine offers extensive axis travels with X-Axis at 1,200 mm, Y-Axis at 730 mm, and Z-Axis at 650 mm. With 25,915 machining hours, consider the opportunity to buy this MICROCUT V-30 Challenger machining center. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Machining hours: 25915 h /power-on hours: 33381 h Nwedpfx Ajzvvm Ned Ijk • Spindle speed: 18000 rpm

Condition: used, Bimatic edge banding machine Njdpfx Aoy Uxv Hod Iowk Pre-milling cutters Roller glue application Pneumatic pre-trimming cutter Pressure rollers Final trimming cutters R1-R2 top-bottom milling unit Max. part height 50mm Max. edge band thickness in roll 3mm Feed rate 9m/min Power consumption 9kW Machine length 295cm Machine inspected, ready for testing

Condition: excellent (used), Year of construction: 1999, I sell the widebelt sanding machine VIET CHALLENGE 211B 1100, year 1999. Configuration: Steel cylinder Hard rubber cylinder Working width 1100mm Pressure rollers for short elements. Air blow cleaning on both units Total weight 2240kg 1 motor Condition very good ! Available immediately. Nwedpfjt N Eyfsx Ad Iok

Year of construction: 2010, condition: used, Year: 2010 Condition: good Configuration: - concept with one knife - automatic feeder - automatic vertical unloader - fully automatic adjustment - machine without tooling required - two knives Technical parameters: - max. size (before trimming) - 330 x 241 mm - max. size (after trimming) - 305 x 229 mm - min. size (after trimming) - 148 x 102 mm - max. thickness - 51 mm - min. trimming on all sides - 2.5 mm - number of working programs - 99 - adjustment time - approximately 10 s - max. speed - 200 bindings / h - weight - 680 kg Nwjdpfsx H Su Tex Ad Ijk - dimensions - 1520 x 1320 x 1450 mm - connection - 230 V, 50/60 Hz, 3-phase, 20 A or 380/415VAC, 50 Hz 3-phase

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,500 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 670 mm, total height: 2,700 mm, overall weight: 5,350 kg, spindle speed (max.): 8,000 rpm, product length (max.): 5,440 mm, number of axes: 3, This 3-axis MICROCUT Challenger VM-1500 was manufactured in 2007. It features a table size of 1,500 x 660 mm, capable of handling a maximum weight of 1,000 Kg. The machine offers X, Y, and Z travels of 1,500 mm, 680 mm, and 670 mm respectively, with a rapid traverse rate of 20 m/min. It includes a BT 40 spindle taper and a spindle speed up to 8,000 rpm. Contact us for more information about this machine. • Table dimensions: 1.500 x 660 mm Nwsdpfoyg Hapex Ad Iok • Max. table weight: 1.000 kg • X/Y/Z rapid traverse: 20 m/min • Tools station: 24 positions • Max. tool diameter: 80 mm (150 mm) • Max. tool length: 300 mm Technical Specification Taper Size BT 40

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Nwedpfxeyr Aiws Ad Iek Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: repair required (used), functionality: limited functionality, operating hours: 27,000 h, Large-format 3D printer for hobbyists and mechanics – ideal as a project or for spare parts Important: The device is partially functional and is explicitly sold in this condition – no guarantee, no returns. Model: Hage 140L-B Type: 3D printer (large format) Printing area: 500 × 700 × 400 mm Condition: Partially functional Sold as: Hobby/spare parts item Operating hours: approx. 27,000 hours Price: €1,700 (negotiable) New price: approx. €75,000 Description: Offered for sale is the large-format 3D printer Hage 140L-B with a generous printing area of 500 × 700 × 400 mm. The device is currently partially functional and is therefore ideal for experienced hobbyists, mechanics, and tinkerers. Whether as a source of spare parts, as a basis for a custom modification, or as a challenge for skilled hands – this device contains a lot of technology and potential. The device has approximately 27,000 operating hours and is sold in its current, partially functional condition. Nodpfx Adjzudz Ej Iewk Who is this interesting for? • Hobbyists and makers who enjoy repairing and upgrading • Those looking for spare parts for an existing Hage device • Tinkerers who are looking for a large-format project at a low price Pick-up only. Private sale, no warranty. Loading the printer onto a trailer is possible using a forklift.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Nice Microcut Challenger lathe turning over bed 550 mm in gap 770 mm over slide 320 mm Center length 1500 mm Control Siemens 810D Chip conveyor Coolant equipment Nwedpfx Aey D Taljd Iok Multifix toolpost with 10 holders Fixed steady Travelling steady 3 jaw chuck manual All manuals present

Condition: used, Year of construction: 2021, functionality: fully functional, Save on liquidity – leasing and hire purchase options available! You are bidding on a Hobart basket conveyor dishwasher, type CN series, in top condition, energy-efficient, with exhaust and wastewater heat recovery. This will save you a significant amount on energy costs in the long term. The machine was first installed in June 2021 in a canteen and was used for lunchtime service. Due to the closure of the business, operations were discontinued. The dishwashing system was newly purchased by the operator and treated with care, and all necessary maintenance was carried out. HOBART presents the new generation of the proven CN series as a powerful PROFESSIONAL version – the new basket conveyor dishwasher stands for greater efficiency and economy, making commercial dishwashing even more sustainable. Professional, powerful, and reliable for the daily challenges in commercial kitchens. Optimal washing results with low energy consumption – even for plastics. The CN basket conveyor dishwasher series has a modular design and operates in a left-to-right configuration, starting with pre-washing, main washing, rinsing, drying, and unloading with a conveyor belt. The disassembly was carried out by the Hobart factory service team. Commissioning will also be carried out by the factory service team, with a contribution to costs, so that the warranty applies. Nwedpszu Rwmsfx Ad Iok This machine has a recommended retail price of approximately €58,000 net / €69,020 gross. You will receive an invoice with VAT shown. 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. A prerequisite for warranty claims is that the machine is installed and commissioned by an authorized Hobart service team. Technical data: External dimensions of the dishwasher: W: 4215 x D: 2336 x H: 2150 mm. Dimensions are shown in the photo sketch. Passage width: 510 mm Passage height: 440 mm Electrical connection: 400V 3NPE 50Hz; 26.5kW Model: CN-C-A-CDC Serial number: 866707054 Year of manufacture: 2021 Subject to change and errors.

Condition: used, Technical data: Working width: 1100 mm 1 Calibrating unit Roller diameter: 160 mm 2 Combination units Roller diameter: 160 mm Workpiece height: 160 mm Sanding belt dimensions: 2200x1130 mm Extraction port diameter: 2x140 mm Electric lifting Digital display Emergency stop switch Total power: 13 kW Nedpoyv Arzefx Ad Iewk Voltage: 380 V Overall dimensions: Length: 1900 mm Width: 1800 mm Height: 2400 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Sanding belt width: 1.350 mm Sanding belt length: 2.620 mm Nedpfowlg Rtjx Ad Ijwk Workpiece thickness: min. 3mm Passage height: max.160 mm Length x width x height 3500 × 1800 × 2400mm Weight: 3640kg

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Nwsdpexyxfpsfx Ad Ijk Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB port The machine will be cleaned, overhauled, and tested by us after receipt of the order. Commissioning and training can also be provided upon request.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, overall weight: 4,500 kg, number of axes: 3, This 3-axis AGIE Challenge 2 eCut wire EDM machine was manufactured in 2006. It offers precision electrical discharge machining capabilities, ideal for detailed and intricate metal work. Consider the opportunity to buy this AGIE Challenge 2 eCut wire EDM machine. Contact us for more information about this machine. Nwodjx D Sb Espfx Ad Ijk Additional equipment • Wire System: Wire diameter 0.1-0.33 mm, Wire speed 60-300 mm/s, Wire tension 0-25 N, Wire spool up to 25 kg, Threading system up to 250 mm height, nozzles 1 mm and 2 mm Machine Benefits Technical Machine Benefits • Max workpiece dimensions (wxdxh): 750 x 550 x 250 mm • Axis travels u/v: ±70 mm • Positioning speeds: manual (x/y) 30°/100 mm, programmable (x/y) exc “a” 0. 9 m/min, cha/exc “d” 3 m/min, u/v/z 0. 6 m/min • Compressed air: Ø 7 mm, 6-8 bar, 5 m³/h, filtered, dehumidified, unlubricated • Cooling water: ≤ tune level -7°c, 20 l/min, 1. 5-3 bar Extra Information Machine still under power

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Nedpfom Amf Djx Ad Ijwk Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge V2 Year of construction 2007 Travels (X/Y/Z): 350 x 250 x 256 mm Travels (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Nsdpjwqcm Ujfx Ad Iowk Incl. AGIE JOGGER handbox Incl. console with USB connection The machine will be cleaned, overhauled and tested by us upon receipt of order. We are also happy to offer commissioning and training.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, warranty duration: 12 months, type of input current: AC, overall weight: 1 kg, For sale: ZEISS T-Scan Hawk 2, a high-precision optical 3D scanner designed for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industrial and research applications, especially when components need to be measured in challenging environments. Fast application, easy operation. Condition: Lightly used, predominantly for trade shows, exhibitions, and training purposes only. Scope of delivery: · T-Scan Hawk 2 Lite · Class 2 blue laser, eye-safe (IEC 60825-1:2014) · Weight: < 1 kg · Calibration plate (DAkkS-calibrated) Nedpfsw Swplsx Ad Ijwk · Sensor cable · Transport case · Acceptance test in our facility with calibration bars in accordance with ISO 10360 · Acceptance certificate with traceability documentation · ZEISS INSPECT OPTICAL 3D Free · T-SCAN Hawk 2 sensor driver ZEISS INSPECT OPTICAL 3D Free · Open and edit new and existing projects · Import of point clouds, polygon meshes · Creation, editing, and processing of polygon meshes · Element construction: standard geometries, points, sections, curves, surfaces, dimensions · CAD import for standard formats: IGES, VDA, STEP, JT Open, STL, PLY · Application of common alignment methods · CAD comparison with colored deviation display · Dimensioning and geometric tolerancing analysis according to ISO GPS and ASME Y14.5 · Reporting module T-SCAN Hawk 2 Sensor Driver · Setup and calibration · Guided user calibration · Data acquisition and project management · Configurable workflow assistant · Switching measurement modes and setting exposure time directly on the sensor · Automatic sensor calibration monitoring · Pre-capture of reference points with graphic support · Real-time display of sensor position and acquired 3D scan data · Continuous transformation into a common coordinate system · Merging upper and lower surfaces · Removal of background points · Automatic calculation and export of non-overlapping polygon meshes · Export of scan data (e.g., G3D format, STL format) Note: The device was exclusively used for demonstration, training, and exhibition purposes, so some signs of use are visible. If required, we can provide a suitable laptop for an additional charge. 3D acceptance certificate available. We are also open to trade-in of older GOM systems upon purchase of the T-SCAN Hawk 2.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 30 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,500 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 2,800 mm, gearing type: automatic, battery capacity: 270 Ah, battery voltage: 24 V, fork carriage width: 815 mm, fork length: 1,010 mm, fork width: 100 mm, fork thickness: 30 mm, ground clearance: 30 mm, tire condition: 100 %, overall weight: 4,200 kg, empty load weight: 2,700 kg, total height: 2,800 mm, total length: 1,950 mm, total width: 1,512 mm, color: yellow, Equipment: pallet forks, 🔍 Looking for a Reliable Forklift? We Are Industry Experts! We specialize in selling high-quality forklifts, offering tested machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your business! 🚜💼 🔥 In this listing, we present: 🚀 COMBILIFT WR-4 - ELECTRIC ⚡ - DUPLEX 4500mm 📏 - Year 2017 🏷️ - ONLY 30 MTH ⏳ - FREE LIFT 🎯 - CONDITION 5/5 🌟 - LIKE NEW! 🏆 This forklift is in excellent technical condition, ready for immediate use. ⚙️🔧 📌 Key Features and Technical Data: 📍 Model: COMBILIFT WR-4 📍 Year of manufacture: 2017 🏗️ 📍 Lifting capacity: 1500 kg 🏋️‍♂️ 📍 Operating hours: 30 MTH ⏱️ 📍 Mast type: Duplex 🚜 📍 Lifting height: 4500 mm 📏 Nedszvl D Djpfx Ad Iswk 📍 Drive type: Electric ⚡ 📍 Load center: 600 mm 🎯 📍 Total weight: 2700 kg ⚖️ 📍 Tires: Solid, like new 🛞🔄 📍 Overall height (collapsed mast): 2800 mm 📐 📍 Technical condition: Fault-free, after a service inspection 🛠️ 📍 Visual condition: Very good 👌 📍 Fork length: 1010 mm 🔩 📍 Free lift: 1500 mm 📈 📍 Overall height: 2800 mm 📊 📍 Total length: 1950 mm 📏 📍 Total width: 1290 mm 📐 📍 Positioner width: 815 mm 🔧 🎯 Equipment Included: 🔋 Battery 🦾 Pallet forks This forklift is the perfect solution for industries that require efficient handling of long loads in narrow spaces, such as the wood 🪵, steel 🏗️, or pipe 🏭 industry. Thanks to its multi-directional movement function 🔄, the forklift ensures easy maneuverability and optimal warehouse space utilization 📦🚛. 🚀 Additional Features: ✔ Integrated multi-directional steering system 🔄 ✔ Comfortable operator cabin 🛋️ ✔ High reliability in intensive use 🔝 ✔ Suitable for both outdoor 🌞 and indoor 🏠 warehouse operations 🛠️ Condition: ✅ Fully functional ✅ Regularly serviced ✅ Ready for immediate work! 🚛💨 📦 We offer transport across Europe 🌍 and provide a FREE initial inspection 🆓! 💰 Pricing & Formalities: 💳 We provide full support for financing options, including quick leasing and credit approvals 💰, even for new businesses 🚀 or companies in challenging financial situations. ✔ Leasing decision in just 2 hours! ⏳ ✔ EUR/PLN invoicing available 💶 ✔ Leasing financing & start-up program for new businesses 🚀 ✔ We are an authorized supplier for most leasing companies 🏦 ⚡ FAST / SIMPLE / AFFORDABLE FINANCING 💼

Condition: used, Year of construction: 2001, operating hours: 6,023 h, total height: 2,500 mm, total length: 3,500 mm, total width: 2,000 mm, Empty weight: 5.000 kg Price: On request - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 00600169 - Operating hours: 6023 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Fanuc - Control system type: 18-M - Power [kW]: 15.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 1020 - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 510 - Table length [mm]: 1150 - Table width [mm]: 500 - Tool holder: BT40 - Main spindle power [kW]: 11 - Max. spindle speed [rpm]: 8000 - Options: Chip conveyor, External cooling, Tool magazine - Transport dimensions: 3500mm x 2000mm x 2500mm (l x w x h) Nedpfx Aozlxnbsd Iewk - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 30 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,500 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 2,800 mm, gearing type: automatic, battery capacity: 270 Ah, battery voltage: 24 V, fork carriage width: 815 mm, fork length: 1,010 mm, fork width: 100 mm, fork thickness: 30 mm, ground clearance: 30 mm, tire condition: 100 %, overall weight: 4,200 kg, empty load weight: 2,700 kg, total height: 2,800 mm, total length: 1,950 mm, total width: 1,512 mm, color: yellow, Equipment: pallet forks, 🔍 Looking for a Reliable Forklift? We Are Industry Experts! We specialize in selling high-quality forklifts, offering tested machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your business! 🚜💼 🔥 In this listing, we present: 🚀 COMBILIFT WR-4 - ELECTRIC ⚡ - DUPLEX 4500mm 📏 - Year 2017 🏷️ - ONLY 30 MTH ⏳ - FREE LIFT 🎯 - CONDITION 5/5 🌟 - LIKE NEW! 🏆 This forklift is in excellent technical condition, ready for immediate use. ⚙️🔧 📌 Key Features and Technical Data: 📍 Model: COMBILIFT WR-4 📍 Year of manufacture: 2017 🏗️ 📍 Lifting capacity: 1500 kg 🏋️‍♂️ 📍 Operating hours: 30 MTH ⏱️ 📍 Mast type: Duplex 🚜 📍 Lifting height: 4500 mm 📏 📍 Drive type: Electric ⚡ 📍 Load center: 600 mm 🎯 📍 Total weight: 2700 kg ⚖️ 📍 Tires: Solid, like new 🛞🔄 📍 Overall height (collapsed mast): 2800 mm 📐 📍 Technical condition: Fault-free, after a service inspection 🛠️ 📍 Visual condition: Very good 👌 📍 Fork length: 1010 mm 🔩 📍 Free lift: 1500 mm 📈 📍 Overall height: 2800 mm 📊 📍 Total length: 1950 mm 📏 📍 Total width: 1290 mm 📐 📍 Positioner width: 815 mm 🔧 🎯 Equipment Included: 🔋 Battery 🦾 Pallet forks This forklift is the perfect solution for industries that require efficient handling of long loads in narrow spaces, such as the wood 🪵, steel 🏗️, or pipe 🏭 industry. Thanks to its multi-directional movement function 🔄, the forklift ensures easy maneuverability and optimal warehouse space utilization 📦🚛. 🚀 Additional Features: ✔ Integrated multi-directional steering system 🔄 ✔ Comfortable operator cabin 🛋️ ✔ High reliability in intensive use 🔝 ✔ Suitable for both outdoor 🌞 and indoor 🏠 warehouse operations 🛠️ Condition: ✅ Fully functional ✅ Regularly serviced ✅ Ready for immediate work! 🚛💨 📦 We offer transport across Europe 🌍 and provide a FREE initial inspection 🆓! 💰 Pricing & Formalities: 💳 We provide full support for financing options, including quick leasing and credit approvals 💰, even for new businesses 🚀 or companies in challenging financial situations. ✔ Leasing decision in just 2 hours! ⏳ Nwedpsztkcyjfx Ad Ijk ✔ EUR/PLN invoicing available 💶 ✔ Leasing financing & start-up program for new businesses 🚀 ✔ We are an authorized supplier for most leasing companies 🏦 ⚡ FAST / SIMPLE / AFFORDABLE FINANCING 💼