Used Chambered Doctor Blade for sale (7,674)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Vollmer sharpening machine for band saws in a robust design. Iedpfx Ajz Ad R Nob Sstl Blade width up to 360 mm. 2 switchable tooth profiles. Grinding wheel, CBN, 250 mm diameter.

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of information to provide, so I have posted several pictures with basic details to give you an overview of the saw's capabilities. It is a rare model with a feeder (single piece) of 0-2000mm, as well as repeat cutting of 2000-9999mm. Automatic zeroing before cutting. CNC saw head with automatic rotation of +/-60 degrees, 2 types of lubrication, emulsion, and direct spray. Option to direct the cut piece to an ejector for small pieces, as well as a chain ejector with a function for lowering longer and heavier pieces. I haven't included this in the pictures as it is not installed, but the saw also comes with a set of protective guards with safety barriers and a large number of spare parts. The complete documentation is original and is linked to the machine's serial number, making installation easy and straightforward. Problem explanation: the saw is connected to the electrical power supply, and each individual function (and there are many) is fully operational. The problem arises during automatic operation; the most likely cause is the program parameters themselves (it uses the Windows platform). I haven't been able to find a suitable programmer who can learn on my machine. Possible solution: I contacted the saw manufacturer, and they directed me to their authorized service provider, so I have their contact information, which I can provide to the future buyer. The estimated cost of repair in Serbia is between 3000-5000 EUR. If you are closer to Germany or the Czech Republic, this cost will be significantly lower. So, there are two price categories: if you buy the machine in its current condition, the price is as advertised. If I resolve the problem, the price will be considerably higher. The advertised price includes professional dismantling and loading onto a truck (a rather important, and not inexpensive, item). Transportation is at the buyer's expense. I hope I have clarified the current condition of the machine. Due to a change in business activities, the saw is surplus to production. Happy shopping! Iodpsyk Inpefx Ab Setl

Condition: used, Year of construction: 2004, Offset 5 color with coating Roland 705/3B LV Year: 2004 Isdpfx Abov Ewlve Sstl Number of impressions (mio): 258 Machine control - RCI - RCI JobCard Feeder - Suction feeder table - Anti static device - Steel plate in feeder Printing units - Number of printing unit(s): 5 - Straight machine - APL but used as PPL Semi Automatic Plate Change - RolandMatic - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening cooling and circulation system: Technotrans - AlcoSmart - Ink temperature control Coating - Number of coating unit(s): 1 - UV coating - Tresu chambered ductor blade system - Drying position possibilities: 3 positions( 1/2, 2/3 and after 5th) - Number of interdeck cassettes/lamps: 2 - UV interdeck dryer - UV dryer in delivery: 3 lamps - IR dryer in delivery: (Eltosch) Delivery - AirGlide - Extended delivery - Powder spray: Grafix Cantronic 3000 - Compressed air compressor, excluded

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Ijdpfezxxmksx Ab Sotl Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), Catalog number: 8110 TECHNICAL DATA - max. blade diameter: 350mm - spindle diameter: 30mm - blade adjustable up/down - spindle lock - blade guard - max. cutting height: 100mm - min. cutting width: 230mm - max. cutting width: 2250mm Ijdpfx Absz Dim Aj Sjtl - max. cutting length: 3000mm - with scoring saw - max. scoring saw diameter: 120mm - spindle diameter: 20mm - power of scoring saw motors: 2 x 0.75kW - power of main motors: 2 x 4kW - electric adjustment of cutting head - power of carriage feed motor: 0.37kW - 2 types of rotational speeds: 3000, 4500 - diameter of dust extraction nozzle: 2 x 130mm - overall dimensions (L/W/H): 4000 x 1300 x 1100mm - shipping dimensions (L/W/H): 4000 x 1300 x 1100mm - weight: approx. 1100kg ADVANTAGES – Polish production – Electric adjustment of cutting head – DTR documentation – with scoring saw – very good condition – used double-blade saw Net price: 12,900 PLN Net price: 3,071 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2003, functionality: unexamined, power: 400 kW (543.85 HP), temperature: 95 °C, number of chambers: 2, For sale are 2 dismantled drying chambers. Iodszyk D Dspfx Ab Sotl Designation: ZLSM-5x1.20-1x3.10-07.72-2-F The drying chamber was designed for drying wooden pallets. Internal length: 8x0.90m + 0.52m Stacking depth: 5x1.20m + 4x0.10m Stacking height: 1x3.10m + 1x0.10m + 0.40m Heating capacity per chamber: 400kW The parts shown in the photos are still available. - Various sheet metal and frame parts - Mühlböck MB4000 control system - 2 sliding doors, each approximately 3.6x7.7m; the buyer must arrange for transportation in advance - 4 heating coils with dimensions 1.30x3.65m - 8 fans, each with 3kW, internal diameter 0.8m, air flow 27500m³/h The insulation has already been removed. The drying chamber is sold as defective and incomplete. Inspection is absolutely necessary!

Condition: used, Year of construction: 2023, Bread slicing machine, circular blade, MHS Ideal L Year of manufacture: 2023 Condition: used Isdpfx Asz A St Nob Sotl Suitable for all types of bread Slice thickness can be freely selected in 1 mm increments 3 additional memory buttons, freely programmable Function for halving and half-slicing Bread passage (L x H x D): 45 x 16 x 36 cm Cutting thickness (in mm): 4 – 24 Connection value: 230V Cutting capacity (slices/min.): 100 Blade type: circular blade, 260 mm Tabletop machine including mobile base

Condition: good (used), Year of construction: 1989, power: 22 kW (29.91 HP), with electric saw blade adjustment chain width 230 mm Ijdpfezv Uyujx Ab Setl motor 22 kW max. cutting height without pressure comb with fixed blade guide 130 mm max. cutting height without pressure comb with movable blade 95 mm with pressure comb, the cutting height is reduced by 15 mm

Condition: good (used), Code: 0442 Brand: VALTORTA Model: FV/TR Roller coater machine REVERS for rollcoating of basecoats and U.V. top coats Conveyor feed system with auto-centering system to keep the belt in track Working width mm 1300 Working table height from the floor mm 900 Working thickness mm 1/180 Iedpfju T Hbwex Ab Sotl 1 Rubber covered spreading roll diameter mm 240 1 Steel dosing roll unit n° 1 diameter mm 165 1 Rubber covered spreading roll REVERS unit diameter mm 240 1 Steel dosing roll REVERS unit diameter mm 165 Rubber covered conveyor rolls diameter mm 190 Rubber covered conveyor rolls diameter mm 60 Rubber covered roll motor power Hp 2 Steel roll motor power Hp 1 Rubber covered roll REVERS unit motor power Hp 2 Steel roll REVERS unit motor power Hp 1 Doctor blade REVERS unit motor power Hp 0,5 Feed speed mt/min 6/30 Independent electrical cabinet with easy commands Machine installed on wheels and rails Overall dimensions mm 2700 x 2000 x 1550 h Weight kg 2700

Condition: excellent (used), Year of construction: 2024, 532 USED Koma RDV - REC Freezing, cooling-proofing chamber. EXTERNAL DIMENSIONS (in cm): - W: 316 - L: 361 - H: 256 INTERNAL DIMENSIONS (in cm): - W: 300 - L: 345 - H: 240 TECHNICAL DATA: - year of production: 2024 - temperature range: -20°C to +20°C - refrigerant: R449A The price is a net price. Paid options available: transport. Isdpfxoz Dbk To Ab Sotl Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 2000, functionality: fully functional, operating hours: 0 h, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 60 °C, inner dimension length: 12,500 mm, inner dimension width: 1,750 mm, inner dimension height: 2,000 mm, total length: 13,000 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Good convection drying chamber with axial airflow, fan, and heating coil at the top and rear. Can be inspected at any time. Functional. Iedpfxozz Saps Ab Sjtl

Condition: new, Year of construction: 2024, functionality: fully functional, Szárítórendszer - 1T 184 TPR Modell, (Mozgatható Szállítószalagos) Itedeua D U Iopfx Ab Sol Kiváló minőségű szárítórendszert kínálunk, mely ideális fafűrészpor, termény, újrahasznosítandó hulladék, ételipari alapanyagok szárítására. A szárítógép teljesen új állapotban van, eredeti csomagolásában.

Condition: like new (used), Year of construction: 2002, machine/vehicle number: M 3448, functionality: fully functional, operating hours: 2,000 h, input voltage: 380 V, input current: 100 A, input frequency: 50 Hz, cutting height (max.): 200 mm, cutting width (max.): 400 mm, total length: 4,000 mm, total width: 2,500 mm, overall weight: 4,800 kg, Equipment: CE marking, documentation/manual, saw blade guard, Industrial two-spindle multi-disc/multi-blade circular saw “COSMEC” – Italy. In very good technical condition. 0035888392103. Itedpfjzq Rw Sex Ab Sel

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox Itjdezixziopfx Ab Sel (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2017, mileage: 10,236 km, power: 24 kW (32.63 HP), first registration: 12/2017, overall weight: 2,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 09/2027, gearing type: automatic, number of seats: 1, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final confirmation, errors, typos, and prior sale: Hako CityMaster 600 with a new engine, sweeping brush with water and dirt tank, new engine, front-mounted mower, hopper spreader, snowplow (Vehicle 267) First registration: 14.12.2017 10,236 km Ijdpfx Aozxkf Ejb Sjtl 1,915 total operating hours, but now with a new engine! 971 brush operating hours Engine new in 2025, currently approx. 170 operating hours Engine: 1,642 ccm 24 kW / 33 hp 25 km/h approved Permissible total weight: 2,200 kg Unladen weight: 1,380 - 1,465 kg Overall length: 3,160 - 3,260 mm x overall width: 1,085 - 1,200 mm x overall height: 1,9985 - 2,202 mm Road approval Articulated steering 2 adjustable brush systems Turbine + water pump on/off Adjustable water quantity 3 speeds for operation Radio/CD Rotating beacon on driver's side, rear 2 headlights on top + 2 in the middle Rearview camera with monitor, additional camera for monitoring the suction nozzle, automatic switching during reversing Radio with Bluetooth for mobile phone and MP3 Repeating lights on cabin roof Distance sensor 7-pole control cable Universal tires 23.00x8.50-12 Trelleborg T539, front approx. 80%, rear approx. 90% Grammer comfort driver's seat with air suspension Universal suction container 600 L, hydraulically tilting, payload 500 kg, emptying height 142 cm, emptying width 865 mm Handheld suction hose for leaves, accumulated dirt, etc., foldable on the passenger side in the middle Universal quick-change roll container Vacuum gauge on container, for monitoring the suction power and indicating decreasing suction power when the maximum container filling level is reached, as well as a clogging indicator Sweeping unit: 2 brushes, hydraulically adjustable, sweeping width 110 to 180 cm, brush arms with 3-fold impact protection Disc brush made of plastic-steel Lightweight weed brush on the right Attachment: Suction nozzle, roll container sweeping unit Universal front-mounted mower 122 cm (hydraulically driven 3-blade special mower with rear discharge, working width 122 cm, integrated pendulum compensation, four-wheel drive with cutting height adjustment in 1 cm increments from 4 - 10 cm, transport safety device for road travel) Attachment: Suction nozzle mower Attachment: Suction system (transfer device for connecting the suction nozzle) Hopper spreader KIF SS200 (single-chamber spreader with fully hydraulic drive, auger discharge, mixing shaft, and foldable spreading disc, loading capacity 200 L, manual control for spreading quantity and width, working width 1.5 - 4.0 m spreading disc, protection, and discharge chute made of stainless steel) Filling sieve, foldable cover, additional protective cover for Citymaster 600. Quick-change base frame for Citymaster 6009, spreader RAL 2011 and 2-layer interior coating, container attachment 130 L, to increase the loading capacity to 330 L for light spreading materials such as salt and granules. Spreading control from the cabin, spreading quantity, spreading width with automatic start/stop function Snowplow 135 cm with breakaway function, rubber scraper blade Inspection + TÜV (technical inspection) valid until 09/2026 Price: €29,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of €10,000 is the district court of Ludwigsl

Year of construction: 2020, condition: like new (used), Our Dornow potato peeling line is for sale, consisting of: Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots Iedpfx Abew R T Dis Sotl For additional monies we can add it: (slicer, metal detector, Storage bunker with conveyor belt (capacity approx. 1t raw material).. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: used, Year of construction: 2019, functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 400 mm, saw blade diameter: 370 mm, height adjustment type: electric, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 3,800 rpm, total length: 2,500 mm, total width: 2,260 mm, total height: 2,000 mm, overall weight: 6,500 kg, table height: 700 mm, Equipment: CE marking, documentation/manual, The Multilama or multi-blade circular saw, model SQUALO 420, is a technologically advanced machine that is easy to use, precise, and extremely reliable. It is an essential tool for a modern sawmill, optimizing the production of sawn timber. Ijdpfx Ajzzad Nsb Sstl It is ideal for producing slats, squares, lumber, profiles, edged boards, prisms, boards, and pallet components.

Condition: new, Year of construction: 2026, The professional CORMAK BS912N metal bandsaw is a robust and precise machine designed for cutting tubes, profiles and solid elements. The model allows cutting materials with a diameter of up to 230mm and operation at angles from 0° to 45°. Automatic downfeed of the saw arm, lowering adjustment by means of a hydraulic cylinder, a cooling system and a stable cast iron construction make this machine ideal for metalworking shops, production workshops and craft workshops. CORMAK BS912N metal bandsaw – precise angled metal cutting The CORMAK BS912N metal bandsaw is a professional machine designed for precise cutting of tubes, profiles and solid elements. Its solid construction, automatic tool downfeed and hydraulic adjustment of the saw arm lowering ensure convenient operation, repeatability and high cutting quality. The BS912N model allows cutting of materials with a diameter of up to 230 mm and making angled cuts in the range from 0° to 45°. This makes the machine suitable for metalworking shops, production workshops and anywhere that accuracy, stability and machining speed matter. Main advantages of the machine Automatic tool downfeed increasing convenience and cutting repeatability Iodpfx Aboy En E Sj Sotl Hydraulic adjustment of saw arm lowering using a cylinder and an oil flow control valve Cutting at angles from 0° to 45° thanks to the swivelling vice Heavy cast iron vice ensuring stable clamping of the material Blade guides with carbide inserts and bearings affecting cutting accuracy and quality Cooling system supplying coolant to the blade and the cut element Wire brush cleaning the blade preventing the blade from clogging Automatic drive shut-off after completion of the cut by means of a limit switch Construction and technology The material to be cut can be fed manually or by means of any mechanical device. The tool feed is automatic, which makes the operator’s work easier and allows stable, repeatable results to be achieved. The lowering speed of the saw arm is adjusted by means of a hydraulic cylinder. The appropriate speed is obtained thanks to a valve regulating the oil flow between the cylinder chambers. This solution makes it possible to adapt the machine operation to the type of material being processed and the expected cutting precision. The required linear blade speed is obtained by changing the ratio on the belt pulleys between the worm gearbox and the drive motor. In the machine base there is a coolant tank with an electric pump, responsible for effective cooling of the blade and the workpiece. Equipment and functions Automatic tool downfeed Hydraulic adjustment of saw arm lowering Swivelling vice with angle scale Quick vice clamp Convenient handle for blade tensioning Blade tension indicator Table for selection of blade tooth pitch and cutting speed Cooling system for the blade and cut material Wire brush cleaning chips from the blade Blade guides with carbide inserts and bearings Automatic limit switch after cut completion Emergency stop of the “mushroom safety” type Technical data Motor 230 V, 50 Hz, 1100 W / 400 V, 50 Hz, 1100 W Blade dimensions 2655 x 27 x 0.9 mm Blade speeds 24 / 36 / 49 / 71 m/min Cutting angle range from 0° to +45° Machine package dimensions 1420 x 500 x 1150 mm Weight 151 / 202 kg Angle 0° Ø 229 191 x 305 max. 355 230 x 230 45° Ø 160 230 x 140 155 x 155

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Incl. transport pallet Incl. pre-freight to 65239 Hochheim Itsdpfsw Nabrsx Ab Sel Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Incl. transport pallet Incl. pre-freight to 65239 Hochheim Availability: short term Isdpsw Nablofx Ab Sotl Storage location: Flörsheim

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine Ijdpjz Ay Rrofx Ab Sstl PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MACH1097, For sale is a reliable and precise grinding machine from the leading French manufacturer, Forézienne (MFLS), designed for the automated and high-quality sharpening and profile restoration of band saw blades. Thanks to its precise CNC control, the machine ensures uniform geometry of the saw teeth, extends the service life of the cutting tools, and significantly reduces setup time. The machine is ready for industrial use, well-maintained, and suitable for both sharpening centers and the woodworking industry. Iodpfszxpkmjx Ab Sstl

Condition: used, Year of construction: 1989, power: 7.5 kW (10.20 HP), input voltage: 380 V, input current: 15 A, input frequency: 50 Hz, Equipment: documentation/manual, Sale of woodworking equipment: 3 sawing lines (in working condition) We offer for sale 3 complete sawing lines for a woodworking enterprise. The equipment is used but fully operational – the lines are running and actively working right now, so you can inspect them under real-world conditions. Each line is self-contained, equipped with its own dust extraction system, and is sold only as a complete set (without disassembling the machines). 🛠 LINE #1 Productivity: 30–35 m³ per shift. Log length: from 1200 mm to 2500 mm. Configuration: Loading ramp, edger, crosscut saw, 2-arbor multi-blade saw A.Costa, resaw, dust extraction system. Power consumption: Total power – 170 kW (of which, the multi-blade saw itself – 40 kW). 🛠 LINE #2 (High power) Productivity: 60 m³ per 10 hours of operation. Log length: specifically for 2500 mm (crosscut saw installed). Configuration: Loading ramp, edger, crosscut saw, multi-blade saw A.Costa, resaw, dust extraction system. Power consumption: Total peak power – 430 kW. 🛠 LINE #3 (For long logs) Iedszxzudspfx Ab Sotl Productivity: 35–40 m³ per shift. Log length: from 2500 mm to 4000 mm (4 meters). Configuration: Loading ramp, edger Walter, multi-blade saw Raimann, trimming saw, dust extraction system. Power consumption: Total power – 200 kW. 📍 Location and terms of sale: Terms of sale: Each line is sold separately and only as a complete set. Disassembling the machines within the lines is not considered. Purchase of the entire complex (all 3 lines) is possible. Price: Available upon request. Location: Volyn region, Kovel (20 km from the city). We invite you to inspect the lines in operation.

Condition: good (used), Year of construction: 1997, Max. cutting width: 310 mm Chain width: 340 mm with spikes Max. cutting height without rake: 90 mm Iodpfozzrckox Ab Setl Max. cutting height with rake: 75 mm Engine power: 30 kW

Year of construction: 2006, condition: used, functionality: fully functional, Multi-purpose chamber furnace line consisting of the following components: • Aichelin chamber tempering and stress-relief furnaces VKHLE 4/2-70/85/130 (2 units) • Aichelin chamber preheating furnace VKHLG 4/2-70/85/130 (1 unit) • Aichelin single-chamber continuous furnace DGKS 4/2-70/85/130 (3 units) • Aichelin chamber washing machine EKFG 4/2-70/85/130 (1 unit) • Aichelin loading/unloading trolleys (2 units) • Aichelin table loader storage station (1 unit) • Aichelin transfer table storage station (1 unit) • Aichelin cooling unit storage station (2 units) • Storage stations (30 units) • Charging racks • Spare parts for the line Useful load: Grate length: 1300 mm Grate width: 700 mm Loading height above grate: 800 mm Max. batch weight: gross max. 1000 kg/grate Aichelin chamber tempering and stress-relief furnace VKHLE 4/2-70/85/130: External dimensions: Width: approx. 1820 mm Height: approx. 4050 mm Length (incl. control cabinet): approx. 3300 mm Working height above floor: 1600 mm Ijdpfx Abjxwn R Ns Sotl General data: Maximum temperature: 350°C Operating temperature: 150-200°C Number of temperature control zones: 1 Chamber preheating furnace VKHLG 4/2-70/85/130: External dimensions: Width (incl. control cabinet): 3035 mm Height (overall): 4450 mm Length (overall): 3450 mm Loading height above floor: 1600 mm General data: Maximum temperature: 600°C Operating temperature: 400-500°C Number of temperature control zones: 1 Single-chamber continuous furnace DGKS 4/2-70/85/130: External dimensions: Width (incl. control cabinet): approx. 3400 mm Height (incl. maintenance platform): approx. 5300 mm Length (incl. exhaust hood): approx. 6850 mm Working height above floor: 1600 mm General data: Maximum temperature: 1050°C Operating temperature oven: 750-1000°C Temperature control range oil bath: 60-150°C Gross batch weight at 950°C (max.): 1000 kg Max. gross heating capacity from 25 to 850°C (max.): 800 kg/h Number of temperature control zones in oven and oil bath: 1 + 1 Oil bath volume: approx. 6.5 m³ Cooling capacity oil bath (at 90°C bath temperature): 80 kW Chamber washing machine: External dimensions: Width: 2900 mm Height (above hall level): 4000 mm Length: 3150 mm Loading height: 1600 mm General data: Washing fluid temperature: 50-80°C Spray fluid temperature: 50-80°C Bath volume, washing fluid: 4550 l Bath volume, spray fluid: 4700 l Gross weight incl. batch and washing fluid: 125 kN Loading table: Width: approx. 2200 mm Length: approx. 3200 mm Loading height: 1600 mm Weight (incl. batch): approx. 29 kN Batch cooling stations: Length: approx. 2100 mm Width: approx. 800 mm Height: approx. 4350 mm Loading height: 1600 mm Weight (incl. batch): approx. 20 kN Preparation table fixed: Length: approx. 2100 mm Width: approx. 800 mm Loading height: 1600 mm Weight (incl. batch): approx. 25 kN Preparation table, hydraulically height-adjustable: Length: approx. 2100 mm Width: approx. 800 mm Lift: 1000 mm Loading height: 1600 mm Lifting capacity: 2.0 T Weight (incl. batch): 25 kN The sale covers the entire multi-purpose chamber furnace line. Individual furnaces, systems, or components cannot be purchased separately. The complete chamber furnace line must be dismantled, loaded, and transported by the buyer at their own expense. Inspection appointments can be arranged on request.