Used Chambered Doctor Blade for sale (7,107)

Year of construction: 2021, condition: excellent (used), Weiss Type: TempEvent T/340/40/3/S Air-cooled temperature test chamber Gbodsycvd Nepfx Afpjh Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture: 2021 Description – Function & Application: For sale is a professional temperature test chamber: Weiss Technik TempEvent T/340/40/3/S. This unit is designed for the targeted heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and research & development to test the temperature behavior, functional reliability, and durability of products. Typical fields of application: - Temperature and function tests of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress testing - Research and industrial quality assurance The chamber is air-cooled and features a recirculating air system for uniform temperature distribution inside the chamber. Operation is via an integrated touch control panel with program and monitoring functions. The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX/tertiary explosion protection) is not specified. Suitability for specific tests—especially battery or safety testing— is the responsibility of the operator. The unit has been tested, serviced, and is fully functional. Technical data (excerpt) Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Key data for temperature tests: - Temperature range: -40°C to +180°C - Temperature change rate, cooling: 4.0 K/min - Temperature change rate, heating: 3.2 K/min - Cooling: air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical data: - Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Equipment: - Stainless steel interior - Recirculating air fan for homogeneous temperature distribution - Reinforced safety door with inspection window - Touch control panel - Status signal lamp Dimensions & weight (approx.): - Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm - Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, please note the following information! The following checks are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data! Specifications are subject to confirmation.) If you have any further questions, we will be happy to assist you by phone.

Year of construction: 2021, condition: excellent (used), Weiss Model: TempEvent T/340/40/3/S Air-Cooled Temperature Test Chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C, Year of manufacture: 2021 Description – Function & Applications: For sale is a professional temperature test chamber, Weiss Technik TempEvent T/340/40/3/S. The system is designed for targeted heating and cooling of test specimens under reproducible conditions. It is used in industrial, laboratory, and development environments to test the temperature behavior, functional safety, and durability of products. Typical application areas: - Temperature and functional testing of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress tests - Research and industrial quality assurance The chamber operates air-cooled and is equipped with a recirculation system to ensure uniform temperature distribution within the interior. Operation is via an integrated touch control panel with programming and monitoring functions. The chamber features a reinforced safety door with observation window. Certified explosion protection (e.g., ATEX / tertiary explosion protection) is not specified. Suitability for special tests—particularly battery or safety testing—is the responsibility of the operator. The unit has been inspected, maintained, and is fully functional. Technical Data (excerpt) Manufacturer: Weiss Technik Model: TempEvent T/340/40/3/S Year: 2021 Temperature: - Test temperature range: -40°C to +180°C - Cooling rate: 4.0 K/min - Heating rate: 3.2 K/min - Cooling method: Air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical Data: - Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Features: - Stainless steel internal chamber - Recirculation fan for homogeneous temperature distribution - Reinforced safety door with viewing window - Touch control panel - Status signal light Dimensions & Weight (approx.): - Test chamber interior: Height 750 mm x Width 580 mm x Depth 450 mm - Exterior dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg Gbodpfsycvdiox Afpoh For your safety as a buyer, the following procedures are carried out on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, all chambers undergo a documented test run Condition: Used Scope of delivery: (see photos) (Subject to technical changes and errors. All specifications are non-binding!) We are happy to answer further questions by phone.

Condition: like new (used), STARK Profile Cutter Set 119 pieces, New, partially in original packaging Article number: JA_G250801 Description / Itemized list 82451 8 94011 6 600130 10 62061 9 37911 6 108611 3 108511 3 108581 6 98671 4 108601 6 53421 2 600604 1 600601 2 600607 16 600608 4 600706 7 602029 4 602062 2 602063 3 8602034 2 8602035 2 8602036 2 8602037 2 8602038 2 8602039 2 6002.06 5 Note – Used Equipment: • Prices are listed as ex works (unless stated otherwise!) from our location in Ottendorf-Okrilla, Germany – free loaded (unless otherwise specified). • Subject to prior sale! • You will receive an invoice showing VAT (MwSt.). • All items are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect items at our location. • Our general terms and conditions apply. • Special agreements are only valid if confirmed in writing. • Any items visible in the background of images are not included in the offer. • Saw blades are shown for display purposes only and are not included in the delivery scope. Shipping options: • We are happy to provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla is free of charge by prior arrangement. (Assembly and product demonstration are available optionally upon request!) • Delivery may be partially disassembled. • Optionally, our qualified service staff can install the machine at your site and provide a brief introduction. Travel, transport, and service time charges apply. Gedpfxjw Tlrko Afpebh

Condition: used, functionality: unexamined, Ferwood Code: RU0010347 - Manufacturer Code: S446.030.9004 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer overhaul service, please contact us. 18KG - 36X26X21 Gedpfsycfd Ssx Afpebh

Condition: new, Chamber Pasteurizer, MultiPas, for 2 pallets, NEW, for processing Euro pallets with Euro and NRW crates, completely made of stainless steel, insulated and lined with stainless steel sheet, condensate drain, single-leaf hinged door, available immediately. We build chamber pasteurizers - for 1-8 pallets - for beverages with and without CO2 - with hinged door or lift door Gbjdpfewhx A Tex Afpeh - only approx. 2.75 kW per blower motor Please feel free to contact us!

Year of construction: 2014, operating hours: 36,000 h, condition: used, functionality: fully functional, REFRIGERATION UNITS IN COLD ROOM "PLUS SISTEMA" TECNO REFRIGERATION S.R.L. – not operational 1st unit - Serial No.: 1. TR140227 2nd unit - Serial No.: 1. TR140227 + 4 pcs evaporators. Gbodpeyf Hbqjfx Afpjh All equipment was disassembled by a qualified technician. Used for 5 years, after which a substantially larger warehouse was built with EU funding.

Year of construction: 2011, condition: like new (used), functionality: fully functional, machine/vehicle number: 11-02/2011, We are offering this as-new GEBER Industrieofenbau GmbH KO/e/u/-3000 chamber circulation oven, year of manufacture 2011. Manufacturer: Geber Industrieofenbau GmbH Model: KO/e/u/-3000 Serial number: 11-02 Year of manufacture: 2011 Rated voltage: 230/400 V Rated current: 125 A Rated heating capacity: 45 kW Heating medium: Electric energy Current type / Frequency: 3-phase / 50/60 Hz Rated temperature: 300 °C Wiring diagram number: 2011 0054 Internal dimensions (WxDxH): 1300x1300x1800 mm Net weight: 2,000 kg Trolley included (see pictures) Documentation, CE declaration supplied We are happy to arrange installation and commissioning through the manufacturer upon request. Gbsdpjyg Nxbofx Afpjh Viewing by appointment possible. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1981, cutting height (max.): 200 mm, chain width: 340 mm, power: 45 kW (61.18 HP), shaft diameter: 65 mm, Double-shaft multiblade saw Manufacturer: Raimann Model: KD Gbjdpeyhlubjfx Afpsh Chain width: 340 mm Cutting height: 200 mm Saw motors: 2 x 45 kW Shaft diameter: 65 mm Electric height adjustment Transport chain with spikes Feed system modernised to stepless speed adjustment via potentiometer, approx. 0 to 40 m/min. Includes 3 saw sleeves with saw blades, some fitted with new saw blades.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 8293250, Multirip Saw PAUL K 4 G/1200 - Model: K4G/1200, Gbedpfx Asyfh I Sjfpoh - Year of manufacture: 1982, - Machine number: 8293250, - Working width: 1200 mm, - Variable feed speed: 2–48 m/min, - Max. saw blade diameter: 270 mm, - Installed power: 33 kW, - Machine in operation. Good condition. Additional shaft included.

Condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available Gbodpswg Axvsfx Afpjh -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant Gsdpfjya Ev Nsx Afpjbh 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climatic Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for temperature and humidity testing of multiple test specimens simultaneously. Device Description: This climatic test cell enables you to evaluate the function or material properties of test items under the influence of temperature and humidity. Efficient air circulation with a high recirculation rate ensures optimal environmental transfer to the test samples. The air treatment section is positioned at the rear of the chamber interior. The refrigeration units are accessible in a separate frame located behind the device. The control system is housed in a separate control cabinet, with the control panel integrated into the cabinet door. Gbedox Eabpopfx Afpjh For dehumidification, the test chamber features a self-regenerating compressed air dryer. A blower system allows the chamber to be purged with fresh air as needed. Technical Performance Data: Temperature Testing: - Temperature range: -60°C to +100°C - Temporal temperature deviation: ±0.5 to 1 K - Rate of temperature change (linear, with test item and thermal radiation, measured at supply air): - Heating: 2 K/min from -40°C to +85°C - Cooling: 2 K/min from +85°C to -40°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89°C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±1% to ±3% r.h. Technical data is based on an ambient temperature of +25°C, nominal voltage 400 V, without samples, without radiation, and without additional equipment. Dimensions: - Internal dimensions (test chamber/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm - External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Configuration: - Cooling unit: Water-cooled, low-noise, semi-hermetic, infinitely variable power regulation via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A Notes: - Inspection by appointment possible (46325 Borken) - Shipping via freight forwarder possible – costs and arrangements upon request - Scope of delivery: (See image) (Specifications subject to change and errors excepted!) We will be happy to answer additional questions by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climate test chamber allows you to evaluate the performance or material properties of a test item under the influence of temperature and humidity. Gsdex Eaxbopfx Afpebh Efficient air circulation with a high recirculation rate ensures optimal temperature and humidity transfer to the test specimen. The air treatment compartment is located at the rear of the interior chamber. The system units are housed in a separate frame behind the chamber and are easily accessible. The control system is installed in a separate control cabinet, with the operator panel integrated into the cabinet door. For humidity control, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be flushed with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point area: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3 % RH over time The technical data apply to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, radiant heat, or additional features. Dimensions: Interior (Test Chamber/Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm External dimensions: - Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, with stepless capacity adjustment via electronic monitoring and control system - Environmentally-friendly refrigerants: R 23 / R 404 A Notes: - Inspection available by appointment (46325 Borken) - Shipping by freight carrier possible – costs and arrangements upon request - Scope of delivery: (see picture) (Subject to technical modifications and errors in specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: Gbsdpfx Afex D Abpopoh - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: used, Year of construction: 2009, Saw blade diameter: max. 300 mm Flange diameter: 95 mm Torsional vibration: 4200 rpm Distance between column and widest saw blade: 220 mm Conveyor belt width: 300 mm Feed motor power: 1.1 kW Please refer to the machine PDF. Technical details Main motor: 18.5 kW Grinding width: 1000 mm Chain width: 300 mm Cutting height: 100 mm Gbjdpfxsygwb Re Afpoh Main motor: 8.5 kW Feed rate: 6–48 m/min Number of spindles: 1 piece

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) Gjdpfert U Nujx Afpjbh (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2016, condition: reconditioned (used), functionality: fully functional, overhauled, delivery time by end of January 2026, 12-month warranty - Max. temperature 200°C; temperature can be increased to 250°C upon request - Internal dimensions: W 1000 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Equipped with Jumo Dicon Touch controller - Loading rails for charging the oven - Heating capacity: 36 kW - Net weight: 780 kg - Exhaust nozzle; exhaust fan and electric damper can be retrofitted upon request - Charging trolley available on request (see photo) - Documentation, CE declaration We are happy to offer installation and commissioning as an additional service. Inspection by appointment in our warehouse. Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, tempering oven, pre-heating oven, tempering oven, drying cabinet, chamber kiln, curing oven, recirculating drying cabinet, recirculating oven Gbsdpfx Afsvk Navepsh

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SN48357, Chamber furnace with exhaust hood, in very good condition. 12-month warranty. - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch Gedpfetbq Eqox Afpsbh - 5-sided heating - Fresh air and exhaust air with dampers, electrically operated by Belimo actuators - Intake air fan controlled by frequency inverter and regulator - Stainless steel exhaust hood - Bentrup 507 control unit, thyristor control - Controller language: German only, switching to other languages not possible! - Additional drag element type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current consumption: 26 amperes - Connecting voltage: 3/N/PE 400VAC - Connection type: prepared for fixed installation, 32 A plug Supplied with a 12-month warranty. Viewing by appointment. Furnace, ovens, annealing furnace, industrial furnace, chamber furnace, kiln, enameling oven, tempering furnace, laboratory furnace, hardening furnace

Condition: new, Year of construction: 2026, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Maximum temperature: 250°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Volume: 8,820 liters - Control: Eurotherm Nanodac Controller/recorder with color touchscreen display - 2 pcs. recirculation fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - 2 pcs. fresh air fans - Automatic dampers - Electrical design: 400 V / 50 Hz / 3NPE Gjdpfx Afsv Hg Euopebh - Increased heating capacity approx. 70 kW - Temperature accuracy: +/- 6 K in an empty oven - Documentation, CE certificate of conformity - Electrical circuit diagram with spare parts list Note: The oven floor is not insulated but fitted with stainless steel sheet. This allows unrestricted entry for all track widths. Alternatively, an insulated floor can be offered (with customer-defined entry rails). We offer new and used industrial furnaces, which we can also retrofit and upgrade according to customer requirements. Furnace, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber furnace, heating oven, chamber recirculation oven, tempering oven, annealing oven, temper oven, annealing oven.

Condition: excellent (used), 31 kW motor Cutting height: 13 cm Godpfxoydltcj Afpjbh Guide width: 30 cm Stepless feed adjustment

Condition: good (used), Lillnord Combi room cold storage chamber – used – year of manufacture 2017 – freezer storage for 18 trolleys 60 x 80 (minus 18°C) – cold room for 4–5 trolleys 60 x 80 (plus 6–8°C) – disassembled in warehouse – good technical condition – outer cladding stainless steel – inner cladding painted – collection from warehouse. Price on request. Gbjdpfxjycq A Ho Afpsh

Condition: new, Gas heated furnace, make VEI type: KA_GB_TO Gbedpfxjcditns Afpoh external dimensions (w x h x d): 3000 x 3700 x 2300 mm interior dimensions (w x h x d): 1500 x 2200 x 1500 mm temperature: 300 ° C loading weight: max. 2500 kg circulation fans: 2 x 4,0 kW = 8 kW heating power: 120 kW

Condition: new, Double chamber furnace, make VEI-Engineering type: KA_GB 10.14.14/d max. temperature: 550°C fan power: 2 x 4 kW heating: natural gas Gbedpfx Aedyvipofpjh burners power: 2 x 100 kW useable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm

Condition: new, High temperature chamber furnace, make VEI max. temperature: 1.200°C Godpfjdyvkyjx Afpjbh useable dimensions (w x h x d): 2750 x 500 x 1.100 mm heating power: electrically, 42 kW

Condition: new, TECHNICAL DATA type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm Gbsdpfxsg Dgymo Afpeh number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7