Used Channel for sale (933)

Condition: new, - Motor power 7.5 kW - Cutting force 20 tons Cutting channel designed for: - max. roll length 1100 mm - max. roll diameter 900 mm Bsdpfeftnt Nsx Afgsww - Machine weight approx. 2500 kg - Tank capacity approx. 100 liters - Hand protection guard in the area of the control panel and opposite - Color scheme: Housing RAL according to customer requirements Protective guard/knife bar RAL 1028 melon yellow Made to order Price and further information on request.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Bwjdpfx Afed Iipzogew Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, Year of construction: 2024, Cabin Type Parts Washer for precise cleaning of metal parts. INTERSONIK ROTAWASH is a cabin type parts washer which provides precise cleaning and perfect drying. Its effectiveness is proved on automative industry especially in engine block washing and cylinder head washing. Operation Principles: Effective washing of whole surfaces of the work piece with high volume spraying and rapid liquid feeding to cabin. With rotational motion, whole complicated surfaces, oil channels, blind holes, water jackets of work piece is provided completely clean and dry. Hermetic operation system prevents the diffusion of water vapour formed during whole operation. Whole operation is controlled via PLC Other Details Bodpfod I A Hrex Afgjww - The machine has sound and durable body construction. - Automatic water supply and chemical design system provide minimum system (maintenance) care and maximum operation performance. -The water contact surfaces are made of stainless stell. -Body covers and control panels are made of epoxy painted stell sheets,which are provided and guaranteed long and continious working life. -Ultrasonic system integration is also available as an option. engine block washing, power train washing, high presssure washing machine, rotational washing machine, cabin type washing machine, cabin type parts washer, parts washer, solvent washer Please feel free to contact with us for other details and options.

Condition: new, empty load weight: 780 kg, maximum load weight: 2,220 kg, overall weight: 3,000 kg, loading space length: 6,110 mm, loading space width: 2,030 mm, tire size: 185/60R12, High loader tandem from the manufacturer HULCO model MEDAX-2 3000.611x203. Bodpfx Aeq Nf Egsfgoww The standard equipment of the Hulco flatbed high loader with brake includes aluminum drop sides, all folding and removable, stable eccentric locks, lashing eyes inside, lashing hooks outside, profile channels for attaching accessories or load securing, very stable welded lattice steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. We also offer accessories for Hulco car trailers such as high tarpaulin, net hooks, ramp set with holder, rear support set, accessory box, straps and anti-theft device.

Condition: new, bore capacity in steel (diameter) 30 mm throat 254 mm bore stroke 120 mm 4 Motor output 9 speeds 120 - 1810 U/min column diameter 92 mm table surface area 475 x 425 mm total power requirement 1,1 kW dimensions 915 x 450 x 1705 mm weight ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors Bedpfx Afeq Nrmrogeww - Operating tool - BMP 160 machine vice

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron Bsdpek Egrpsfx Afgoww - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, Semi-automated nailing machine for production of complete pallets in two steps. How does it work? Blocks and leg boards are fed manually in the left fixture. The machine nails the parts together automatically. The ready-made legs are moved by hand to the right fixture, where deck boards are manually placed on top of the legs and nailed together automatically. Both fixtures run simultaneously. The machine starts by pushing a button and the finished pallets are manually pushed out in the back of the machine. Bwjdel Awy Dspfx Afgow Mychrome has various additional machinery that can easily be docked on to existing machines in order to build a longer line where more stages can be automated. The possibility to modify the design and the size of the pallets is still available with the additional machinery. Pallet size: Min / max length of deck & legs: 600 mm - 1 600 mm Min / max width of deck: 600 mm - 1 300 mm Specifications: Operators | 2 Length | 3,5 m Height | 3,6 m Power | 14 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 300L/min Should be filled and controlled | Container for lubricating oil Machine capacity | 500 pallets/8h Standard equipment: 1 channel for legs 1 channel for pallet assembly 1 pallet matrix interchangeable 1 leg matrix adjustable Operators terminal for production control Program for saving nail positioning Nailing System | Hydraulic beam nailing, 3 nail boxes, 30 nailing hammerheads

Condition: new, bore capacity in steel (diameter) 30 mm throat 270 mm bore stroke 125 mm 4 Motor output 9 speeds 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice Bjdpfxsun Um Eo Afgjww

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm Bwjdpfx Afjucgr Iegjw - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, Material testing station / final inspection consisting of the following main components Keyence XG-H500M Digital 5-million-pixel B/W camera Keyence XG-7701P Multi-camera image processing system / controller Keyence CA-DC21E Lighting controller Opto Engineering TC23096 Bi-telecentric lens Keyence XG-H500M Digital 5-million-pixel B/W camera CCD: 2/3-inch monochrome CCD, square elements, all pixels have 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), Line skip (40.3 ms) Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Lighting controller Type: Lighting controller, only for XG/CV-5000/CV-X200/CV-X100 series Input: Forced shutdown of lighting: Input voltage max. 26.4 V, min. 2 mA Bedpfx Ajg Sxmfjfgeww Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse width modulation method (Emission frequency: 100 kHz) [Change controller settings] Brightness levels 255 levels digital [Change controller settings] Number of connections: 2 channels (available for LED connection and terminal block connection) Voltage: 12 VDC/24 VDC [Setting via DIP switch] Power: Max. 40 W (30 W per channel) Synchronization: Synchronization via FLASH output/continuous lighting [Change controller settings] Response time (1) Constant voltage control: Max. 10 ms at 12 V output, Max. 20 ms at 24 V output (2) Pulse width modulation method: Max. 1 ms at 12/24 V output Display: LED display Supply voltage: 24 VDC ±10 % Power consumption: 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence XG-7701P Multi-camera image processing system / controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×): 0.093 Image circle Ø (mm): 11.0 Max. detector size: 2/3" Working distance (1) (mm): 278.6 wF/# (2): 8 Typical telecentricity (max) (3) (deg): < 0.06 (0.08) Typical distortion (max) (4) (%): < 0.04 (0.08) Depth of field (5) (mm): 77 CTF @ 70 lp/mm (%): > 40 Image area of the object (6) with 1/3" detector (4.8 x 3.6 mm) (mm × mm): 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm): 61.29 x 46.02 with 1/2" detector (6.4 x 4.8 mm) (mm × mm): 68.82 x 51.61 with 1/1.8" detector (7.13 x 5.33 mm) (mm × mm): 76.67 x 57.31 with 2/3" - 5 MP detector (8.50 x 7.09 mm) (mm × mm): 91.40 x 76.24 Dimensions Mount: C Phase setting (7) Length (8) (mm): 336.6 Diameter (mm): 143 Weight (g): 2500 Complete warehouse liquidation, large selection of storage shelves, pallet racking, shelving systems, vertical lift. High-quality industrial machines, lathes, grinding machines, hand tools. More items - new and used - can be found in our shop! International shipping costs on request!

Condition: new, empty load weight: 580 kg, maximum load weight: 1,920 kg, overall weight: 2,500 kg, axle configuration: 1 axle, loading space length: 3,001 mm, loading space width: 151 mm, loading space height: 153 mm, loading space volume: 7 m³, suspension: other, tire size: 185/70r13, Covered trailer, braked low-loader tandem from the manufacturer ANSSEMS, model GTT2500, 301x151 VT3. As standard equipment, the Anssems box trailer with brakes features a lockable cover with railing, aluminum side panels, a ramp, internal latches, adjustable lashing eyes, profile channels for attaching accessories or securing the load, a support wheel, and a V-drawbar. Financing: Available with NO down payment!!! Other sizes, configurations, and more affordable models can be found in our shop: ----- All our cost-effective offers can also be found on our website. Bodpfx Afof Nt D Rogjww Delivery throughout Germany (except to the islands) is possible! Please ask us for prices. ----- PKW-Anhänger-Center Ahrens, Moordeicher Landstraße 37, 28816 Stuhr near Bremen, Tel: 0, Fax: Pick-up times: Monday - Friday – [Time] Pick-up is not possible on Saturdays!

Condition: used, empty load weight: 300 kg, maximum load weight: 1,050 kg, overall weight: 1,350 kg, loading space length: 2,510 mm, loading space width: 1,300 mm, loading space height: 1,500 mm, tire size: 195/70r14c, Sturdy, braked low-loader with a high cover, manufactured by ANSSEMS, model BSX1350 251x130. As standard equipment, the Anssems covered trailer with brakes features aluminum sideboards, a cover and frame, internal locking mechanisms, external lashing points, profile channels for mounting accessories or securing the load, a very stable welded steel frame, side rails, a front headboard, a front flap, pull-out supports for the tailgate, a support wheel, and a V-drawbar. We also offer accessories for Anssems car trailers, such as a flat cover, net hooks, a corrugated grid attachment, a sideboard attachment, a rear support set, a toolbox, lashing points, lashing straps, and a lock. --- You can find all our cost-effective offers on our website. Germany-wide delivery is possible (except for the islands)! Please ask us for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday – hours Pick-up is not possible on Saturdays! Bsdpogf Nxzjfx Afgoww

Condition: used, Roche MagNA Pure LC Nucleic Acid Preparation Station Manufacturer's description, all information without guarantee. Features - Save time with the fast, fully automated isolation of high-quality DNA, RNA, and mRNA. - Obtain reliable, reproducible results. - Benefit from high flexibility in terms of sample type and volume, as well as elution volume and post-elution processes. - Benefit from software-assisted setup of reagents and disposable items. Bodpeh Dpxhjfx Afgsww - Automated pipetting of PCRs into LightCycler® capillaries (LightCycler® sample carousels), LightCycler® 480 multiwell plates (96-well), PCR plates or strips, or tubes. Product description The MagNA Pure LC instrument is a benchtop device for the rapid, cross-contamination-free preparation of nucleic acids and PCR setup. A completely closed housing, automatic clot and tip detection, and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument. Filtration, centrifugation, and other manual steps are completely eliminated. No vacuum pumps or hoses are required. The piston-driven 8-channel nozzle head and the direct displacement liquid handling system minimize the risk of cross-contamination to an absolute minimum. UV decontamination and the HEPA filter system ensure maximum safety for samples and the environment. Item condition: used, untested Scope of delivery as shown in the picture You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Bedpfx Ashwrhuofgeww Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Fiege 8-channel hot runner controller, including connection cable and Harting connector. This unit comes from a toolmaking facility and was used exclusively for sampling purposes. As a result, it has very few operating hours. Bedsyr Eitspfx Afgsww The controller is supplied complete with cable. Before use, an electrician should adapt the connector configuration to your tooling.

Condition: used, This listing is for a Zeiss Axioskop EL-Einsatz 5 Objectives Microscope. The unit is in full working condition and is ready for immediate release. Objective Lenses supplied: Plan 100/1.25 Plan 40X/0.66 Plan 20x/0.40 Achroplan 10x/0.25 SPL10/0.25 Zeiss Axioskop EL-Einsatz 5 Microscope Overview The Zeiss Axioskop EL-Einsatz 5 microscope is a sophisticated instrument designed for advanced microscopy tasks, particularly in research and clinical settings. Its range of objective lenses and features supports high-quality imaging and user-friendly operation. Key Features: Bjdpfxoxxzlio Afgjww Water Immersion: These objective lenses are designed for application in physiological salt solutions, making them perfect for examining thick biological specimens, such as brain sections. High Numerical Aperture (NA): The lenses feature high NA values (e.g., 0.80 for the 50x lens), enhancing light-gathering capability and image resolution, especially beneficial for fluorescence microscopy. Fluorescence Capabilities: The Axioskop EL-Einsatz 5 can capture fluorescent images across four channels. The system automatically adjusts brightness and white balance, simplifying the imaging process. Ergonomic Design: With an adjustable ergotube, users can comfortably position the eyepieces for extended use. Essential controls are conveniently located for ease of access. Smart Microscopy: The microscope is built for efficiency, featuring automatic adjustments that minimize the need for manual intervention, streamlining workflow. Applications: The Zeiss Axioskop EL-Einsatz 5 is suitable for a variety of applications, including: Materials Science and Metallography: Ideal for examining the microstructure of materials and conducting failure analysis. Physiology and Electrophysiology: Great for observing living cells and tissues, understanding physiological processes in real-time. Biomedical Research and Clinical Diagnostics: Useful for analysing biological samples, including histological sections and cultured cells, contributing to disease research and diagnostics. Microscopy Tasks Requiring Advanced Imaging Capabilities: Perfect for researchers needing high-resolution images and automation in their microscopy tasks.

Condition: used, Year of construction: 2004, Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP plate exposer - Quantity: 1 - Manufacturer: Fujitsu Bjdpfx Afewv D T Tegjww - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output capacity: approx. 20–30 plates/hour (depending on resolution) - Compatible with various workflow systems - Robust construction for prepress department

Condition: used, SynenTec Cellavista V 3.1 Cell Imager Manufacturer: SynenTec Model: Cellavista V 3.1 Resolution: Up to 0.35 µm at 40x magnification Magnification options: 2x, 4x, 10x, 20x, 40x Illumination: Brightfield and up to 6 fluorescence channels Bsdpfx Afowv Rayegoww Camera: 8-bit progressive scan CMOS with a pixel density of 5440 x 5440 (29.6 MP) Sample types: Supports SBS standard plate formats (6, 12, 24, 48, 96, 384 wells), culture dishes, and microscope slides Throughput: Can image up to 250 plates per day Automation: Fully automated with options for integration into robotic systems Voltage (U): 100 – 240 V AC 50/60 Hz Power (P): 295 VA max Manufactured: More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, This listing is for the Thermo Scientific™ F1-ClipTip™ 12-Channel Pipette The unit is in full working condition and is ready for immediate use The Thermo Scientific™ F1-ClipTip™ 12-Channel Pipette is a high-precision manual pipette designed for efficient and reproducible liquid handling in laboratory settings. It features Thermo Fisher's innovative ClipTip™ technology, ensuring secure tip attachment and ejection without the need for forceful insertion or removal. Key Features Number of Channels: 12 Volume (Metric): 30 to 850 μL Increments: 1 μL Compatible Tips: ClipTip 1000 Color: Blue Model: Bluetooth* (see description section below for more details) Programmability: Yes Type: 96 format (designed for 96-well plate applications) Volume Range: 30 to 850 μL (with the ClipTip 1000) Tip Attachment: Tips lock securely in place with a light touch and remain sealed until intentionally ejected Ergonomic Design: Lightweight handle with a 120° adjustable finger rest for both right- and left-handed users Volume Adjustment: Secure volume lock to prevent drift during operation Warranty: Industry-leading lifetime warranty with convenient online registration Certifications: CE-marked in accordance with IVD Directive in Europe; manufactured according to ISO 9001, ISO 14001, and ISO 13485 standards Bwodpfx Afexv Di Esgew Applications Ideal for applications requiring high precision and reproducibility, such as: Genomics and proteomics Microplate assays Cell culture and drug discovery High-throughput screening

Condition: used, mileage: 29,100 km, power: 90 kW (122.37 HP), first registration: 05/2012, overall weight: 5,400 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, loading space width: 1,500 mm, loading space length: 2,000 mm, loading space height: 400 mm, total length: 4,705 mm, total width: 1,710 mm, total height: 2,210 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar Fumo M30 C C 4x4 completely overhauled * 3L Turbo diesel 90kW / 122 hp Iveco engine, Euro 5 Bwodpfx Afsz Nt Tfogew * 29,100 km, 2,390 operating hours * Switchable all-wheel drive * Wheelbase: 2450mm (short) * Automatic transmission * 4-channel ABS, 4-wheel disc brakes, internally ventilated * High-pressure comfort hydraulics * Swivel function, 2 front * Leak oil line, front * Rear hydraulics * Front lift, SWV 500 * Ball head - trailer coupling * Light bar with 2 work lights * 4-pin socket, front * Power steering * Electrically adjustable, heated mirrors * Electric windows * Air conditioning * Auxiliary heater * Driver's suspension seat * 3-way tilting body (sandblasted, primed, and newly painted in RAL 2011) * Tires 285/65 R16c M&S, new * Workshop-checked, new inspection/service, various wear parts replaced, all filters and oils new, new TÜV/emission test - Leasing/financing/vehicle rental/trade-in/delivery possible. Various attachments and implements in stock. You can find other vehicles of the Fuso Canter and Multicar brands, as well as various attachments and implements, at: - Errors and prior sale excepted. - Our general terms and conditions apply.

Condition: good (used), functionality: fully functional, machine/vehicle number: WSM00000005299374, empty load weight: 8,559 kg, maximum load weight: 27,441 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2022, next inspection (TÜV): 07/2027, loading space length: 13,320 mm, loading space width: 2,490 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65 R 22.5, color: white, Year of construction: 2022, operating hours: 1,406 h, Equipment: ABS, cooling unit, our vehicle number #30992 3 Schmitz axles Tire size 385/65 R 22.5 Permissible total weight 36,000 kg Payload 27,441 kg Unladen weight 8,559 kg Body dimensions (internal, L x W x H): 13,320 mm x 2,490 mm x 2,650 mm, volume: 87 m³ Color: white Double-deck Refrigeration unit S.CU V2.0 with 1,406 diesel operating hours Lift axle Bedpfez Ip Saex Afgoww Pallet box Portal doors Disc brakes Diesel/electric cooling Temperature recorder Schmitz Flower rack Multi-function floor V7 3 air guide channels 1 row of lashing bars Raise/lower function ABS/EBS Simple external steering rods Interior lighting Work lights Jost fifth wheel Forklift accessible Aluminum rims Load securing certificate EN 14642 Financing available upon request!!!

Condition: good (used), functionality: fully functional, 6 PSG hot runner controllers for sale 3 individual units: €880 each 1 station with 3 units on a mobile frame: €2,400 for the complete station Bjdpfsz Ndhljx Afgsww The three units of the station can be used together as a 24-channel control system or individually.

Condition: ready for operation (used), Year of construction: 1978, Höfer veneer saw incl. joining milling unit Cutting and milling length 3550 mm Cutting height 45 mm Saw motor power 2.2 kW Milling motor power 1.1 kW Extraction channel Workpiece clamping by handwheel Year of manufacture 1978 Bsdpewq D Tpefx Afgsww Price 2800.-

Condition: new, Year of construction: 2026, CORMAK WL2000 Laser Welder 3-in-1 is an advanced industrial device using fiber laser technology for precise welding, cutting, and cleaning. Thanks to its compact design and integrated control systems, the machine is an ideal solution for production plants requiring high efficiency, repeatability, and minimal thermal impact on the material. Main advantages of the machine Efficient water cooling system – ensures stable operating temperature and extends the service life of components. Ergonomic welding head – adjustable spot size from 0–5 mm, interchangeable nozzles, 7 m fiber optic cable, and full mobility. Automatic wire feeder – synchronized with the welding machine software, ensuring continuous operation. Welding with or without wire – flexibility in choosing the appropriate welding method. Processing of thin materials – e.g. stainless steel from 0.5 mm thickness. High weld repeatability – durable and aesthetic welds without the need for additional finishing. Bodpsizr Rlsfx Afgsww Optional laser cleaning function – expands the functionality of the device. Faster welding process – up to 3–10 times faster compared to traditional methods. Low indirect radiation level – proper protective glasses are sufficient for safe operation. Design and technology The handheld laser welder WL2000 is equipped with a 2000 W laser source, a water cooling system, and a modern welding head. The control system allows convenient switching between welding, cutting, and cleaning functions. The design enables operation in hard-to-reach areas, while interchangeable nozzles allow welding at various angles. Precision and work efficiency Thanks to the focused laser beam and minimal heat-affected zone, the CORMAK laser welder enables precise and durable welds without the risk of material deformation. High penetration depth and working speed make it an ideal tool for industrial applications where quality, speed, and repeatability are essential. Applications Processing of stainless steel, mild steel, galvanized steel, aluminium, and brass. Industrial plants, metalworking workshops, and production lines. Precision welding of lightweight and thin-walled structures. Removal of coatings and cleaning of metal surfaces. Standard equipment Laser welder with integrated water cooling system. Welding gun with focal length adjustment and accessory set. MaxPhotonics laser source. Automatic wire feeder. Complete set of connection cables. Starter kit of nozzles and protective lenses. Optional equipment Optical set for laser cleaning – PLN 1500 net. Training materials and support CORMAK provides instructional videos on its YouTube channel to help with machine commissioning and operation. This is valuable support for operators, especially during the initial period of using the device. Technical specifications Parameter Value Maximum laser power 2000 W Laser wavelength 1080 nm Penetration depth (stainless steel at 1 m/min) 4.60 mm Penetration depth (mild steel at 1 m/min) 3.60 mm Penetration depth (aluminium at 1 m/min) 4.10 mm Penetration depth (brass at 1 m/min) 4.10 mm Welding speed 0–120 mm/s Automatic wire feeder Ø 0.8–1.6 mm Maximum power consumption ≤6.05 kW Cooling system Water cooling Operating voltage 230 V Shielding gas consumption Approx. 10–12 L/min depending on wire diameter Dimensions 600 × 1100 × 1100 mm Weight 185 kg

Condition: used, Year of construction: 2003, Overview  This rinser-filler-capper bloc was manufactured in 2003 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in PET bottles. It includes a rinsing machine with 2 channel and an isobaric filler with integrated capper for plastic screw caps. The machine is currently available promptly, and further information is available upon request. Technical data  - Capacity: - 10,000 bottles per hour - Formats: - 1,0 l PET bottles - 0,5 l PET bottles - 0,33 l PET bottles - Working direction: - Clockwise - Rinsing system: - 36 rinsing nozzles - 2 channel rinser - With stainless steel pipes - Filling system: - Isobaric system - 36 filling valves - Capping system - Manufacturer: Arol - 9 capping heads - With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sport caps - Dimension - Approx. 4.100 x 3.000 x 4.000 mm Scope of Delivery  Bwsdpewiy Tvjfx Afgjw - Rinser, filler, capper in triblock construction - Vacuum barrier system - Stainless steel CIP cups - Cap feeding system