Used Channel for sale (904)

Condition: used, Year of construction: 1987, faceplate diameter 2200 mm swing diameter 2500 mm turning height 1600 mm Control Siemens total power requirement 100 kW weight of the machine ca. 35 t vertical lathe with two RAM; faceplate Ø 2000 mm; SPS supported control for storable cycles; RAM/channel 1 two Capto recordings C8 with Internal tool cooling, RAM/channel 2, two Capto mounts C8 with internal tool cooling; Chip conveyor / spindle Z-axis as new The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Fpsdpoyqty Djfx Adaed We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, operating hours: 9,089 h, load capacity: 4,500 kg, lifting height: 3,000 mm, free lift: 150 mm, fuel type: diesel, mast type: telescopic, empty load weight: 6,295 kg, Equipment: cabin, fork extension, full service history, seat heater, Boost your material handling efficiency with this reliable and powerful Linde H45D diesel forklift. Designed for heavy-duty performance, this truck offers a load capacity of up to 4.5 tons and combines robust engineering with exceptional operator comfort and safety. Fpsdpfoyrcypox Adaod The truck has been used in a production facility. It is fully operational and all service procedures have been followed. The forklift is sold with an extra set of fork arms as shown in the video link. Other videos are available under the same channel. The user's manual is attached. For detailed technical data, please refer to page 224 in the manual.

Condition: reconditioned (used), Year of construction: 1990, Hot rolling mill for REBARS De-rebars - 8 - 32mm Capacity - 250.000 TPY Fpedpfx Adsvpv Drsasd - STANDS, GEARBOXES, MOTORS, SHEARS, QUENCHING, OIL LUB UNITS, - TWIN CHANNEL, APRON, COOLING BED, ROLLER WAYS, FULL ENGINEERING, - WORSKHOP, AIR COMPRESSORS, TESTING LAB, MOBILE CRANE ORIGIN OF GOODS: 100% ITALY / EU Please contact us for more details. Thank you!

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 12-25, A fully automatic cutting machine for Tissue paper rolls. High precision servo control system - "Control Techniques" Cutting large rolls Diam. up to 280mm - in single channel. Cutting rolls in two channels - up to max. Dia. of 140mm Automatic lubricant spraying system and air cooling for the blade. The machine complies with CE Safety standards. Specifications: - Product cutting dia.(Max)– 280 mm - Cutting speed Max – 160 cuts/min (x 2 lines = 320 Toilet rolls/min) - Computerized controlled functions: * Product and trim length * Cutting speed * Sharpening frequency and advance * Blade lubrication frequency * Fault display * Counter (coded) Fpedpfx Adoup U Rajaed * Inlet conveyor and hoper transferring logs automatically from the ewinder into the cutting channel. * Choice of program according to the various products. - Clamps – machine is supplied together with 4 rigid pneumatically operated clamps, according to customers products dia. - Blade dia. – 600 - 800 mm - Electric supply – 12 kw x 380 v - Air pressure – 1/4 hose 6 atm - Dimensions – 6.5 x 2,2 x 2.4 m - Weight – 3500 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Exhaust System Manufacturer: Hocker Polytechnik Fjdpfeyrpxljx Adaepd Model: MultiStar JP5 Year: 2012 Volume: 20,000 m³ Motor: 30 kW Includes briquetting press BrikStar c-3 18 Vacuum operation Filter surface area: 121.3 m² Filter bags: 100 pieces Bag length: 2,300 mm Bag diameter: 170 mm (externally pressurized) Compressed air connection: 6.0 bar, 1" Operating pressure: 4.5 bar Compressed air consumption: approx. 216 Nl per bag row, at a pulse duration of 200 ms Noise level - Jet operation: approx. 75 dB(A), depending on local conditions Base area, L x W: 2,540 x 2,420 mm Required space, L x W: 3,500 x 3,380 mm Connection, bottom: 2,300 x 2,300 mm (inside) Total height: 4,430 mm Weight, approx.: 1,960 kg Channel, 90° bend, 2 mm ⌀ 900 x 800 mm - 1 unit Bolted version, galvanized sheet steel, 2 mm Duct size 1: 900 x 800 mm Duct size 2: 900 x 650 mm Shape: asymmetrical 460406 Duct 2 mm, 750 mm long, 900 x 800 mm - 2 units Bolted version, galvanized sheet steel, 2 mm 1 blank cover 2 mm, 900 x 800 mm 1 piece T-piece for MS xP to BrikStar 1 piece 300 x 2,300 mm to existing briquetting press Manufacturer: Gross (approx. 1,100 x 1,100 mm / press height: 1,260 mm)

Condition: new, functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, NS-6022HG Tube laser cutting machine 3kw 3 Chuck Professional Pipe Laser Cutting Machine Fjdpfx Adowu Rm Reaopd with automatic loading system with 6m automatic unloading with Chinese 3D bevel head-BLT tubes T CE Anti-radiation glass protective guards AVR KIT OF NOZZLE, LENS ETC(SPCS FOR EACH) Series: NS-HG Type: Three chucks Groove function: Standard Power: 3KW Maximum pipe length: 7000mm Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm~150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flatoval tube: Short axis≥15mm, long axis ≤ 210mm Channel steel: Max20# I-beam: Max18# H steel: Max175*90mm Maximum acceleration: 1.0G Chuck maximum speed: 100r/min Machine weight: 10t Power supply specification: 380VAC, 50Hz Standard: Support servo (groove), dust prevention (Y axis), dust prevention (X axis), dust prevention (Z axis), safety fence (light curtain), zero tail material, cutting area dust removal, rear card hollow dust removal

Condition: used, functionality: fully functional, first registration: 11/2024, Year of construction: 2024, We are offering this used LITHEC LithoFlash Inline HBDM XL75 Inpress Control Lithec Heidelberg XL75, year of manufacture 2024. The Lithec system is a suitable alternative to Heidelberg’s InpressControl. Type: LithoFlash® Inline HBDM XL75 Serial Number: GG 0326 Year of Manufacture: 10/2024 The system was removed because the press it was installed in has been sold to Asia, where there is no demand for this system. Inline measurement and control system for offset printing Reduced make-ready times increase job throughput. Significant waste reduction results in direct substrate cost savings. In addition, using a measurement and control system also ensures production quality. Application Areas • For sheet-fed and web offset printing presses with a production width of 52–205 cm • Measurement and control of process ink and special color densities • Monitoring of tone value increase, print contrast, and trapping parameters Customer Benefits • High savings thanks to LithoDyn dynamic control • Minimal energy costs due to flashing LED • Clearly structured, user-friendly interface • Definable print control strips • Effective protection against contamination thanks to innovative glass/visor system • Long service life and low operating costs Measurement Methods and Sensors • Wear-free sensor system with integrated dust and dirt protection • Density measurement in accordance with ISO standards • Parallel measurement of all density channels over the entire print width • Measurement of each sheet • 0/45° optics • Maintenance-free, long-life LED measuring light • Polarizing filter • Measuring range: 0.0 – 2.2 D • Use of existing print control strips possible • Selectable height, width, and configuration of measurement fields (minimum size 3×4 mm) • Strip library for optional use of various print control strips • Reproducibility: 0.01 D depending on measurement conditions • Line speed up to 15 m/s Scope of Delivery • Sensor crossbar • Control unit, industrial PC with 23” touchscreen Fpjdpfx Adoyrp Umeaod • For the operation of necessary electrical and mechanical assemblies • Advanced Dust Protection (enhanced contamination protection) • LithoDyn (dynamic control) • LithoJobChange (dynamically controlled job change) • LithoFlash One Shot (measurement and control with press at standstill) Naturally, the system can also be installed on machines other than the XL75, such as: KBA RMGT Komori Manroland If you have any questions or would like further information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, TECHNICAL SPECIFICATIONS ZOPO V10-B X-axis travel 1,000 mm Y-axis stroke 620 mm Z-axis travel 630 mm The distance spindle nose to table 120 ~ 750 mm T-channels 5 x 18 T channel distance 100 mm The size of the working area of the table 1,200 x 600 mm Maximum weight per table 800 kg Spindle taper type BT 40 Main axis motor power (30 min./continuous) 15/11 kW Main shaft motor torque S1 - 52,5 Nm / S2 - 95,5 Nm / S3 -118, Nm Main shaft transmission Direct drive Maximum speed of the main shaft 12,000 rpm SPECIFICATION OF X, Y, Z AXES Rapid feed on the X/Y axis 36 m/min Rapid feed on Z-axis 32 m/min Maximum feed X/Y/Z axes 10,000 mm/min X/Y axis motor power (Torque) 3 kW (20 Nm) Z axis motor power (Torque) 3 kW (36 Nm) ATC TOOL SHOP (automatic tool change) Tool magazine type With arm Tool magazine capacity 24 Tool holder type BT 40 Tool change time 2.5 sec. ACCURACY X/Y/Z positioning accuracy ± 0.008 mm X/Y/Z repeatability ± 0.005 mm MACHINE DIMENSIONS Length x width 2,850 x 2,450 mm Height 2,850 mm Weight 6,800 kg ACCESSORIES INCLUDED IN THE PRICE Fanuc 0i-MF controller with 10.4˝ color LCD monitor Main shaft with direct coupling (Direct Drive), motor 11/7.5 kW and maximum speed 12,000 rpm 3 axes controlled simultaneously Linear guides with rollers on the X, Y, Z axes 45mm Fpedoiyyypjpfx Adajd Tool magazine with arm with 24 positions Cooling unit with tank Oil spindle cooling system Spindle air blowing system Air gun System for separating oil from the coolant (Oil Skimmer) Chip conveyor with chain Closed electrical panel with air conditioning Communication interfaces for programs and data: RS 232 interface, CF card and USB M30 automatic shutdown Transformer Centralized automatic lubrication Rigid tapping Inside machine LED work lamp x2 LED warning lamp in 3 colors MPG (manual pulse generator) mobile remote control with cable Screws and soles for leveling the machine Tool box + tools Operating manuals and spare parts list Telescopic guards for all 3 axes Fully enclosed workspace with self-locking doors CE mark 2 year warranty on control 1 year on machine delivery is free on truck showroom CNC Top Ten bv Denekamp Holland

Condition: good (used), Year of construction: 2019, Strapping machine, Mosca, SoniXs-MP-6 B – used - : Price ex location: only €8,500 (net)! Fpedpjyhxn Eofx Adaod Manufacturer: Mosca Model: SoniXs-MP-6 B Year of manufacture: 2019 No. 117169 Channel size: approx. 60 cm × H 50 cm 1L+N+PE, 100-240V, 2.00 – 0.84A, max. 16A, Strap used – strap width can be changed with a conversion kit!: Strap length: approx. 4,500 m per roll Strap width: approx. 8 mm Strap thickness: approx. 0.45 mm Core: approx. 200 mm Material: polypropylene (PP) Colour: black Condition: good Available: immediately Location: Frankenberg / Saxony warehouse

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 521 S ÜÇLÜ SU TAHLİYE MAKİNESİ YÜKSEK FREKANS MOTORLU, - Possibility of opening water drainage channels for PVC and Aluminum Profiles - Possibility for three groups to work separately - Ability of the water drainage system to operate in an angled position Fjdpfxora Nrqe Adaopd - Pneumatic profile clamping system - Fully automated system operation - More efficient and long-term operation with high frequency motors (18000 rpm) - Vibration-free and better quality grooving due to high frequency motor

Condition: excellent (used), Year of construction: 2014, operating hours: 8,900 h, machine/vehicle number: LP50VH2, 1) Technical specifications Press with conveyor Technical data baler: Manufacturer Presona Typ LP 50 VH2 Year of construction 2014 Press power main press 50 tons Specific press force 63 N/cm2 Feed channel 1,500 x 1,100 mm Filling volume 2,7 m3 Theoretic throughput capacity 730 m3/hour Throughput capacity under operating conditions 340 m3/hour Bale size 1,100 x 720 mm, lenght variable Drive power 45 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a • bulk weight of 30 kg/cbm 8 up to 10 tons/hour • bulk weight of 50 kg/cbm 11 up to 13 tons/hour • bulk weight of 100 kg/cbm 15 up to 22 tons/hour Bale density (paper, newspaper) 400 up to 550 kg/m3 Filling volume hydraulic oil tank 600 l Weight baler 16 tons netto Fpedsyrhi Njpfx Adaod Scope of delivery: Press, electrical cabinet, control panel, chain conveyor The documentation (operating manual, CE declaration, electrical/hydraulic diagram) is complete. Visiting is possible by appointment. We are not responsible for technical information or any errors. Upon request, we can send video materials of the working press

Condition: excellent (used), Year of construction: 2021, Stacja pipetująca CyBi-FeliX z CHOICE Head, 8-channel Choice adapter 10-1000uL i 0,5-50 uL Rok produkcji: 2021 Marka: Analytik Jena Fsdpfx Adsumtkaeaopd Model: Cybio Felix Choice

Condition: good (used), Control unit, heating controller, osmosis control control box, heating controller, heating control device -Eurotherm: nanodac 4-channel curve recorder Fpodpfefd Iuajx Adasd -Heating control system for: 2 heating fields -Table control unit with: 380 V connector -Number: 3x available -Price: per piece -Dimensions: 560/540/H300 mm -Weight: 26 kg/piece

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, Image processing system consisting of 5 million pixel B/W camera ( model number CA-H500M) and image processing controller (model number XG-X1500). The set includes cables and a white backlight (model number CA-DSW30). Type: Camera*1 Image pickup element:2/3" B/W CCD image receiving element, 11x high-speed square pixel capture, 5,050,000 pixel Cell size 3, 45 x 3, 45 µm Valid pixel count:4,990,000 pixels 2432 (H) x 2050 (V) Pixel transmission speed: 130 MHz (65 MHz x 2 channels) Scanning system: Full frame (61.2 ms), interlaced (40.3 ms) Transmission system: Digital serial transmission Electronic shutter: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 ms to 9000 ms can be set with numerical values. Lens mount: C screw mount Fpodpfxjmza Ile Adaod

Condition: new, Year of construction: 2026, functionality: fully functional, The FM 230N transport fan is a professional solution for the local extraction of sawdust, wood chips, and dust generated during wood processing. Its compact design, durable motor, and high efficiency make this sawdust blower an ideal component of dust extraction systems in carpentry shops, workshops, and for single- or multi-spindle machines. Key Advantages Effective sawdust extraction – capacity of 1000 m³/h enables efficient removal of contaminants directly from the workplace 0.75 kW motor – provides adequate torque with low energy consumption High impeller speed – 2950 rpm ensures intensive airflow 100 mm inlet diameter – allows easy connection to commonly used machines and systems Low weight (15 kg) – facilitates easy transport and installation at various workstations Design and Technology The FM 230N fan features a closed, welded steel construction with the impeller mounted directly on the motor shaft. This design eliminates power losses associated with belt drives and minimizes vibration. The housing has been optimized for airflow, ensuring stable operation even during continuous use. The electric motor is powered by 230V at a standard frequency of 50 Hz, allowing universal application in most workshops without the need for three-phase power installation. Precision and Performance The FM 230N is designed for highly efficient transport of air containing lightweight wood particles. Thanks to its optimized impeller and airflow channel, the unit minimizes air resistance, enabling uninterrupted operation even with large volumes of chips and sawdust. It performs equally well as a transport fan for sawdust or as a local blower supporting woodworking machines. Applications The FM 230N is suitable for carpentry workshops, furniture manufacturing plants, and production facilities using machines that generate dust. It can operate independently or as part of a larger dust extraction system. Particularly recommended for use with: planers and jointers thickness planers spindle moulders edge banders circular saws Fsdovu Ad Ajpfx Adaspd Standard Equipment powder-coated steel housing 100 mm inlet port stable mounting base single-phase 230V motor Optional Equipment 100 mm flexible hoses dust collection bags Technical Specifications Parameter Value Motor power 0.75 kW Speed 2950 rpm Extraction capacity 1000 m³/h Inlet diameter 100 mm Outlet diameter 110 mm Voltage / Frequency 230 V / 50 Hz Dimensions (L × W × H) 430 × 400 × 340 mm Weight 15 kg

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw - Signal lamp for workpiece flow - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Fodpfx Adex S Hmzeajpd Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: good (used), functionality: fully functional, Year of construction: 2014, laser type: fiber laser, laser power: 4,000 W, CNC Laser Cutting System TruLaser Robot 5020 LW01 4000 Watt Max. working area (X x Y x Z) mm: 2000 x 1000 x 700 Laser power: 4000 watts Operating hours: 19,975 h Beam on hours: 10,353 h Standard equipment Machine: - KUKA Robot KR30 HA (High Accuracy) - Robot working area (according to layout) Fpedpfxjyifr Hs Adaed - Software bundle Laser Robot Tech - Documentation in hardcopy - Basic media supply equipment - Robot media guide - Robot elevation kit - KTL adjustment set - Mobile operator trolley for KCP - Compact dust extractor 3000 m³/h, plate filter, extinguishing device - Laser safety cabin - Extraction ducting - Laser protection window - Cable channels Robot: - Magnetic coupling Workpiece positioner: - Tilting rotary positioner DKP400.1 - Energy supply for DKP 400.1 - Actuator/sensor interface for DKP 400.1 - 3D clamping plate 800x100 mm Demmeler system - Two-station rotary table - Active safety for rotary table partition - Energy supply for rotary table - Actuator/sensor interface for rotary table - Flexible fixture mount rotary table - Modular clamping system - Stand for modular clamping system incl. counterholder Extended laser equipment: - TruDisk 4002 - Chiller for TruDisk 4002 - 30m fiber optic cable Technology package: - Laser welding technology package - Option: motorized focus adjustment - Option: TeachLine - Gas supply block for argon shielding gas Laser safety cabin: - Automatic sliding door - Video monitoring with camera

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3261, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, rotary table diameter: 1,600 mm, Equipment: rotational speed infinitely variable, Used Milling/Turning Center SHW UniSpeed 5T MC-No. 3261 – Year of manufacture: 2011 Travel paths: X = 2,000 mm | Y = 1,300 mm | Z = 1,300 mm Design: Self-rigid machine frame without elaborate foundations. Precision compact roller guides on all axes. Machine column in portal construction, spindle head and saddle made from GGG 60 cast iron with hydraulic weight compensation. Drive & Feed: Digital AC individual drives, stepless 2–30,000 mm/min, acceleration 2 m/s². Direct measuring system for high accuracy. Universal Milling Head (orthogonal): - GGG 60 cast iron, automatic 360°/180° swivel, 64,800 CNC-controlled positions - SK 50, tool pull-in force 20 kN - Power: 26 kW (100% duty cycle) / 36 kW (40% duty cycle), 22–6,000 rpm - Hydromechanical quick tool clamping CNC Rotary Table: - Ø 1,000 mm, planarity 0.015 mm - Turning: up to 250 rpm | Torque: 2,700 Nm - Table load: Milling 6,000 kg, Turning 3,000 kg - Max. swing diameter: 1,800 mm Balancing System: Integrated system for vibration monitoring & correction (DIN ISO 1940 G 6.3 to >G 3). Operation via Siemens 840D. Tool Changer: - Chain magazine for 90 tools - SK 50, max. Ø 125/250 mm, length 400 mm, weight 25 kg - Horizontal tool change, fixed-location coding, air-blow spindle protection Control: Siemens 840D, mounted swiveling on the machine. Electrics: Total connected load approx. 80 kVA. Control voltage 24 V, protection class IP 54, EN 60204. Control cabinet with integrated cabinet cooler (two-chamber system, airtight, with dehumidification). Cooling & Lubrication: - ICS & shower ring (switchable), 500 l tank, max. 40 bar - Minimum quantity lubrication (MQL, Lubrix 850) via spindle - Rinse gun, frame flushing, air/coolant changeover Fjdpjw Eb Itjfx Adajpd - Lubrication: central for guides, spindle grease-lubricated, milling head oil mist Chip Conveyor: Hinged belt, X-axis 2,000 mm, width 350 mm, discharge height 1,250 mm Additional Systems: - Single-channel collision monitoring - Protective air on glass scales - Wireless 3D probe - Extended milling head swivel range -90° to +110° - VisioPort for clear view - Rotary union in rotary table for clamping hydraulics incl. clamping monitoring - Zero-point clamping system with control panel buttons - Safety glass (18 mm) - Air cleaning unit ILT Unifil 1 MRV70-4.0 (4,200 m³/h) - External B-MPI handheld device with handwheel, override, emergency stop - Energy connections: compressed air 4–6 bar (G¼) Paintwork: Base color RAL 7004 signal grey, functional units RAL 7016 anthracite grey and RAL 9011 graphite black, silk matte, oil & soda resistant.

Condition: new, Year of construction: 2026, The ERBA EVP-RA 550 vibratory finishing machine features a flat-bottom working tank with separation capabilities, designed for processing medium to large parts. It is equipped with an easily exchangeable screening unit. Discharge and separation are performed via the integrated flap (manual/pneumatic operation). Upon request, reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously regulated using a frequency inverter (optional). Thanks to the lateral discharge, the EVP-RA 550 can be linked with other machines for integrated operation. The system can optionally be equipped with a fully automatic PLC control unit. Fpjdpfxsyq Rh Se Adasd ERBA vibratory finishing systems are known for their durability and reliability, supported by a hot-cast polyurethane lining in the working tank. Technical data: - Gross volume: 550 L - Working channel width: 390 mm - Unbalanced motor power: 4.0 kW - Speed: 1,400 rpm - Tank inner diameter: 1,400 mm As an experienced partner, we provide comprehensive expertise in vibratory finishing technology. Together with you, we develop efficient solutions to achieve optimal process results. Prices are net plus statutory VAT and shipping costs. Images may show the system with accessories, which are optionally available and subject to additional charges. If interested, we look forward to your inquiry. We are happy to provide you with non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are concluded via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which also includes our general terms and conditions, legal notice, and information about your right of withdrawal, before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, The EVP-RA 550 vibratory finishing machine from ERBA features a rising process channel floor with integrated separation facility. It is equipped with an easily interchangeable screening unit and stands out for its high operational efficiency, thanks to the integrated drop step. Emptying or separation is performed via the integrated flap (manual/pneumatic). For higher load requirements, reinforced suspension and a heavy-duty motor can be fitted upon request. The motor speed can be steplessly adjusted using a frequency inverter (optional). Owing to its side discharge, the EVP-RA 550 can be linked with other machines to form a processing line. The system can also be supplied with a fully automated PLC control unit (optional). ERBA vibratory finishing systems are renowned for their durability and long service life, which is largely due to the hot cast polyurethane lining of the process chamber. Fjdpfjyq Rgujx Adaspd Technical specifications: - Gross volume: 550 liters - Channel width: 390 mm - Imbalance motor output: 4.0 kW - Speed: 1,400 rpm - Internal drum diameter: 1,400 mm As an experienced partner, we provide expert advice on all aspects of vibratory finishing. Together, we develop efficient solutions to achieve optimal process results for your application. Prices are net, excluding the currently applicable statutory VAT and shipping costs. Equipment shown in the images may include optional accessories that are available separately and subject to additional charges. If you are interested, please do not hesitate to contact us. We are happy to offer you free and non-binding consultation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. The contract negotiation takes place via telecommunication (e-mail, phone, messaging portal). As a first step, we will provide you with a non-binding offer, which will include our general terms and conditions, legal notice, and information on the right of withdrawal prior to any purchase or contract conclusion.

Condition: new, Year of construction: 2026, The ERBA EVP-RA 350 vibratory finishing machine features a rising work chamber floor with integrated separation system. It is equipped with an easily replaceable screening unit and delivers high operational efficiency thanks to its integrated drop step. Discharge and separation are managed via the built-in hatch (manual/pneumatic operation). On request, a reinforced suspension and a more powerful motor can be installed for higher load requirements. The motor speed can be infinitely adjusted via frequency converter (optional). Side discharge allows the EVP-RA 350 to be linked with other machines. The unit can be optionally equipped with fully automated PLC control. ERBA vibratory finishing systems are characterized by their robustness and long service life, largely attributed to the hot-cast polyurethane lining of the work chamber. Technical Data: - Gross volume: 385 L - Working channel width: 340 mm - Unbalance motor power: 2.2 kW - Speed: 1,400 rpm - Internal drum diameter: 1,200 mm As an experienced partner, we offer expertise in vibratory finishing processes and cooperate with you to develop efficient solutions for optimal processing results. Fpjdpfx Adoyq Rc Aoajd All prices are net plus the current statutory VAT and shipping costs. Images may show the machine with optional accessories, which are available separately and may incur additional charges. If you are interested, we look forward to hearing from you. We are happy to provide you with expert and non-binding consultation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This listing is intended solely as an online presentation of our product. Contracts are negotiated via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which will also include our general terms and conditions, imprint, and information on your right of withdrawal, before any purchase/contract is concluded.

Condition: used, mileage: 1,71,770 km, power: 92 kW (125.09 HP), first registration: 06/2004, fuel type: diesel, axle configuration: 2 axles, color: black, gearing type: mechanical, emission class: euro3, Year of construction: 2004, TARGA: GS717AP TITLE: MITSUBISHI CANTER 3.0 HOOK LIFT, LEAF SPRUNG FRONT AND REAR REF: 24C32 YEAR: 06/2004 HORSEPOWER: 125 DISPLACEMENT: 2977 cc EMISSIONS CLASS: Euro 3 KILOMETRES: 171,770 GEARBOX: manual DIFFERENTIAL LOCK: no RETARDER/INTARDER: no AXLES: 2 WHEELBASE: 2500 mm TOWING CAPACITY: yes ORIGIN: imported CAB: short, low SEATS: 3 PAYLOAD: 1,300 kg - GVW (Tractor): 3,500 kg fully loaded - GVW (Tractor + Trailer): 7,000 kg fully loaded BODY TYPE: hook lift HOOK LIFT MODEL: PRISMAG 3 TON TELESCOPIC (extendable): no SWIVEL: no ROLLER: no ADR: no ACCESSORIES: - Hook height: 90/92 cm - Channel width: 88 cm - Body ref. 24-U-30 BODYWORK CAPACITY MAX: 3.15 m + 0.14 m OVERALL LENGTH: 4.60 m OVERALL LENGTH WITH CONTAINER: 5.00 m REFURBISHED: yes INSPECTED: 10/04/2024 TYRES: 100% NEW PRICE: €24,500.00 + VAT – including body 24-U-30 Displayed prices do not include VAT. Please contact our sales team for an up-to-date quote and terms. For more information: Loris: 3484773001‬ Fedpouznrvofx Adaepd URL: #hookliftspecialists AURORA HOOK LIFTS operates in the purchase and sale of industrial and commercial vehicles, specializing mainly in the waste management sector. Experts in trucks, trailers, and hook lift equipment. With a stock of over 50 trucks and more than 150 bodies and containers, available for immediate delivery, with and without hook lift cranes. E.&O.E. (Errors and omissions excepted) Due to the high volume of listings and details provided, Aurora advises verifying the accuracy of the data with our sales team.

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, total length: 1,330 mm, year of last overhaul: 2026, total width: 1,500 mm, total height: 1,600 mm, DGUV certified until: 03/2027, empty load weight: 540 kg, input frequency: 50 Hz, type of input current: three-phase, Conical rounder WP Kemper Fpjdpfx Ajwmwlkedaod Stainless steel design with oiling system & blower Cone and rounding channels newly Teflon-coated Approx. 5m working path Movable machine Connection: 400V, 16A CEE plug Dimensions: 1500 x 1330 x 1600 mm (W x D x H) Refurbished used machine With warranty & spare parts service Option: Delivery service Maintenance contract Service package Training & commissioning More top bread rounding machines in stock!

Condition: not inspected (used), Year of construction: 1998, machine/vehicle number: 13189, functionality: limited functionality, VERTICAL PANEL SAW WITH ELECTRIC MOVEMENTS & DIGITAL DISPLAYS FOR CUTS Brand: GMC MACCHINE SRL Model Type: KGS 660S Serial No.: 13189 Year: 1998 (Photos taken prior to any potential refurbishment, machine offered as-is) MACHINING CAPACITIES: - Max. horizontal cutting length: 5300 mm - Max. horizontal cutting height: 2100 mm - Max. vertical cutting height: 2200 mm - Max. cutting depth: 80 mm OTHER FEATURES: - Power supply: 380V Three-phase+T - Installed power: 7.5 kW Fpjdpfx Adeu R Ulheajd - Main motor power: 4.4 kW (6 hp) - Saw blade speed: 5,200 rpm Pneumatic blade feed - Carbide-tipped saw blade: Ø 300 mm, bore Ø 30 mm - Welded steel frame, PVC slat frame with automatic retraction via pneumatic cylinders - Fully lengthwise pneumatic retractable intermediate support with 2 adjustable and retractable stops - Retractable rollers for panel handling - Pneumatic locking of the saw carriage - 8 bar pneumatic feed - Digital display for cuts - Complete extraction system DPS Back cover spans the entire rear of the machine Lower longitudinal channel for sawdust collection Multiple extraction points in the lower section Extraction port: Ø100 mm - Support for floor-mounted installation - CE Marked Total space required when mounted on supports: 6300 x 1600 x 3040 mm (includes operator and maintenance area) Transport dimensions, 2 packages: . 1 frame 6300 x 860 x h.2620 mm . 1 pallet 3150 x 1000 x 1000 mm Total weight: 1250 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Offered as a lot, without refurbishment or warranty. Ex works price, excluding VAT. Transport and services on request.

Condition: new, Bernardo Vario pillar drill SB 40 professional Technical specifications Drilling capacity of max 40 mm Drill Chuck 1-16 mm / B 18 Dome MK 4 Spindle speed, RPM continuously 90-1455 Throat depth 320 mm Drill table swivel - 50 ° up to + 50 ° Distance from spindle / table 590 mm Distance from spindle / base plate 1155 mm Quill stroke 160 mm Quill feed 0.1 / 0.2 / 0.3 mm / Rev Column diameter 120 mm Table size / T - slot size 505 x 425 mm / 14 mm Desktop 360 x 370 mm base plate Engine capacity 1,0 / 1,5 kW Machine dimensions (W x D x H) 500 x 930 x 1870 mm Weight 380 kg Properties Varioantrieb for exact setting of the speed Quill delivery either by hand or with mechanical feed Easy change of the tool through automatic tool ejector Set speed by means of digital display can be read quickly and easily Massive, swivel cast-iron table with T-slots and coolant channel Coolant system and lighting in the scope of delivery included Adjustable drill depth stop, drilling depth using the scale can be read Right link run Setup to thread cutting Scope of delivery Fodsd Hxk Njpfx Adaspd Chuck Dorn MK 4 / B-18 Coolant system Digital speed display Keyless drill Chuck 1-16 mm / B 18 Reduction sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 LED machine luminaires Automatic tool ejector Height-adjustable guard