Used Channel for sale (1,027)

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – wood-chip biomass boiler (2009) ⚙️ Technical data • 🔹 Model: Fröling Turbomat 500 • 📅 Year: 2009 • 🔥 Nominal output: 450 kW (W40) • ♨️ Maximum output: 495 kW • 💧 Water content: 750 litres • 🧱 Operating pressure: 6 bar • 🌡️ Max. temperature: 110 °C Kedpfx Asxmrwfeabenc • ⚖️ Weight: approx. 6 800 kg • 🏭 Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Main features • ♻️ Fully automatic ash removal and heat-exchanger cleaning • 🔥 Four-layer, fireclay-lined high-temperature combustion chamber • 💦 Water-cooled feed channel – ideal for moist fuels • ⚙️ Moving grate for continuous and efficient combustion • 🌬️ Lambda control with multi-zone air regulation and low emissions • 🌀 Automatic draught and suction fan control • 🧰 Robust industrial design, easy to maintain • 🌲 Fuels: wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • ⚡ High efficiency, fully automatic operation • 🔧 Low maintenance, long service life • 🌫️ Reliable performance even with higher-moisture fuel • 🏢 Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary

Year of construction: 2021, condition: excellent (used), Rigol MSO8204 Digital Oscilloscope The MSO8204 4CH, 2GHz, 10GSa/s Digital Oscilloscope adopts RIGOL’s self-developed chipset “Phoenix”, which can gain the data acquisition capability of up to 10GSa/s sample rate, realising the high integration of all the function modules required for the analogue front-end (AFE), and greatly improving the consistency and reliability of the digital oscilloscope. The innovative UltraVision II technical platform is equipped with higher waveform capture rate, full digital trigger technology, and full memory hardware measurement technology. The MSO8000 series digital oscilloscope also integrates multiple instrument modules, such as MSO, arbitrary waveform generator, digital voltmeter, 6-digit counter and totaliser, and protocol analyser, offering extraordinary user experience at an unprecedented price point. Features: Analogue bandwidth: 2GHz (Single-Channel and Half-Channel modes) 4 analogue channels, 1 EXT channel, and 16 standard configuration of digital channels (required to purchase the probe) Up to 10GSa/s real-time sample rate Up to 500Mpts memory depth (Standard) High waveform capture rate (Over 600,000 waveforms per second) Knedpfxowq Thce Aaboc Up to 450,000 frames of hardware real-time and ceaseless waveforms recording and playback functions Integrates 7 independent instruments into 1, including digital oscilloscope, 16-channel logic analyser, Spectrum analyser, arbitrary waveform generator (option), digital voltmeter, 6-digit frequency counter and totaliser, and protocol analyser (option) Auto measurement of 41 waveform parameters; full-memory hardware measurement function A variety of math operations, built-in enhanced FFT analysis, and peak search function Waveform histogram analysis (standard) Independent search, navigation keys, and event table Real-time eye diagram and jitter analysis software (option) Built-in advanced power analysis software (option) User-defined one-key quick operation 10.1-inch capacitive multi-touch screen, 256-level intensity grading display, with colour persistence Multiple interfaces available: USB HOST&DEVICE, LAN(LXI), HDMI, TRIG OUT, and USB-GPIB Web Control remote command Unique online version upgrade Sophisticated and convenient industrial design, easy to operate Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: K00447, Citizen K16 VIP – Swiss-Type CNC Sliding Headstock Lathe General Information: • Year of manufacture: 11/2006 • Serial number: K00447 • Manufacturer: Citizen Machinery Co., Ltd. (Miyota Nagano, Japan) • Machine weight: 1,950 kg Overall Dimensions: • Width: 1,610 mm • Depth: 1,850 mm • Height: 1,050 mm Technical Specifications: • Max. bar diameter: 16 mm • Max. turning length: 200 mm • Main spindle speed: 15,000 rpm (2.2 / 3.7 kW) • Sub-spindle speed: 10,000 rpm (0.55 / 1.1 kW) • Control: Fanuc Series 31i • Number of axes: X1, Y1, Z1, Z2, C1, C2 • Full C-axis on both spindles • 20 bar high-pressure pump, dual channel Tooling Configuration: Front Tool Post: Kedpfxsxl Tl Is Aabonc • T1–T5 – stationary tools • T11–T14 – driven tools (radial or axial) Tool Holder Block: • T21–T24 – stationary tools for main spindle operations • T31–T34 – stationary tools for sub-spindle operations Equipment Included: • IEMCA Genius 118 Type 37 LL bar feeder (year 2007, serial no. 020704BA02) • Set of guide bushings for machine and bar feeder • Turning tool holders and driven tool holders • Automatic fire extinguisher (fire protection system with activation sensor) • 20 bar high-pressure pump / 2 channels Technical Condition: The machine is in very good technical condition, fully operational and ready for immediate use. Regularly serviced and used in precision manufacturing. Additional Information: • Nameplate: model K16 VIP, serial no. K00447, year of manufacture 11/2006, weight 1,950 kg. • Machine can be demonstrated under power.

Year of construction: 2023, condition: new, functionality: fully functional, Rental system Hosokawa Alpine AS 100 Aeroplex The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with each other and break reducing their size. Once they are fine enough they are attracted to the central outlet, acting as a sort of static classifier but without a precise sharp top cut in comparison to the AFG (which is fitted with a rotating classifier wheel). Once the comminuted particles make it through, they exit the system either to a cyclone or directly to an air filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the gas pressure on the grinding nozzles or the feed injector, air volume, feeding rate, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Technical details Stainless steel construction, pharma design Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) Kodpfx Asq A T Ilsabjnc Batch operation, for a few grams normally (product dependent) Scope of supply Complete small system comprising dosing channel, spiral jet mill with manual pressure control and filter bag

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025/002, Finger jointing machines and Knodpfx Aocbyp Njabjc lines are a masterpiece of woodworking industry >wood entry lengths 900 to 6100 mm< >wood rests and tools drive< >Best tooth milling quality and optimized cutting speed< >Long service life of the milling tools / dovetail cutters< -MINDA - MACH I (patented) -High performance finger jointing line -for KVH / DUO / TRIO / BSH / GL / CLT -technical running meters capacity = approx. 150 m/min -vertical and horizontal joints possible max. 200 x 300 mm -extremely flexible; short set-up times; reliable operation The only package system in the world that can also process a single board or single beam. -finger jointing machine, for vertical and horizontal milling, zinc profiles, made in Germany, along with new developments in the clamping stations and the transfer channel on the router table, has the Joema MACH I include a groundbreaking benefits, fast pace. Together with 1200 mm milling channel at 40 mm Thickness technical power meter = approx 150 meters /min, very reliable material transport - No vulnerable conveyor rollers, flaps and cross conveyors - high availability - for all sections including square suitable - by fully automatic, continuous channel matching is possible in extreme cases single mill - thus the system is extremely flexible, vertically horizontally and zinc profiles possible performance with KVH 160 x 280 mm are 38 meters / min, with KVH 100 x 300 mm, 64 meters / min, at BSH 45 x 250 mm are 110 meters / min, >>cutting-edge technology simply kept

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: PNG2 2501HEX-special - 2200xxxxxx, cooling capacity: 270 kW (367.10 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,767 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 10 bar, temperature: 7 °C, volume flow: 46.3 m³/h, total width: 2,190 mm, total length: 3,465 mm, total height: 2,425 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / Air-cooled chiller unit Type: Phönix PNG2 2501 HEX Special Manufacturer: MTA S.p.A. The Phönix PNG2 2501 HE models are compact water chillers suitable for outdoor installation. The unit is Eurovent certified. Equipment features: - xDRIVE controller system - Microchannel condenser coil - Sound-insulated compressor housing - Oversized evaporator and coil; evaporator flow rate: 35 m³/h / 88 m³/h Cooling capacity (kW): 270 Chilled water outlet/inlet temperature (°C): 7 / 12 Flow rate (m³/h): 46.3 Available pump head (bar): 0 Ambient temperature (°C): 35 Refrigeration circuit: - Refrigerant: R513A, GWP 631, safety classification A1 - Refrigeration circuits (number): 1 - Compressors (number): 1 - Capacity control (%): stepless from 25 to 100 Electrical data: - Voltage (V): 400 - Frequency (Hz): 50 - Phases: 3 - Max. power input (kW): 122 - Max. current (A): 201 - Starting current (A): 314 - Protection class: IP54 Dimensions: - Length (mm): 3465 - Width (mm): 2190 - Height (mm): 2425 - Weight (kg): 3767 - Connection: Victaulic DN 100 Serial No.: 2200xxxxx Year of manufacture: 2023 Condition: visually excellent, technically good Stock unit, new Price: on request in EUR (plus VAT, ex works MTA Italy) – 12 months warranty (Technical modifications and prior sale reserved!) Knsdpfx Asxazidoaboc Location: MTA, Tribano

Condition: used, mileage: 7,18,689 km, power: 368 kW (500.34 HP), first registration: 01/1996, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel-air, Year of construction: 1995, Equipment: air conditioning, differential lock, parking heater, = Additional options and accessories = - Electrically operated windows Knsdpsxp Utzofx Aaboc - Heated seat - Radio - Spotlights - Toolbox = Remarks = Axles Configuration: 4x2 Structure Dish height: 122 cm 27 MCJost sliding dishAir hornstop lightslarge light boxroof rackhose rackStanding exhaustsRoar pipeNato plug connection Due to a company reorganization, the sale is currently taking place via Troostwijk auctions. For bids, we would like to refer you to this site: ostwijkauctions... View more pictures and video's at Or visit our YouTube channel: Bart Spierings NL-DE-GB-FR) Govorim po ryccki Para información en Argentina llamar E-mail autobombas. We do our utmost to provide you with the correct information about the vehicle. Nevertheless, no rights can be derived from the information on our website. = More information = Technical information Number of cylinders: 8 Transmission Transmission: 12 gears, Manual gearbox Axle configuration Tyre size: 315/80 R22.5 Brakes: drum brakes Front axle: Steering; Tyre profile left: 95%; Tyre profile right: 95%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80%; Suspension: air suspension Measures Dimensions (LxBxH): 575 x 250 x 400 cm Weights Empty weight: 6.450 kg Carrying capacity: 11.550 kg GVW: 18.000 kg Max. towing weight: 40.000 kg Functional Extendable superstructure: Yes Interior Number of seats: 2 Condition Number of keys: 1

Condition: used, functionality: fully functional, ShowRange SRFD2600 Digital Ultrasonic Flaw Detector Set. The rugged SRFD2600 is designed for the severe environment. Its domestically unique omniseal design enables it to resist the damp, sandstorm, dust, and pollution in all sorts of environmental extremes ranging from ocean to desert. The full screen function enables the echo wave displaying area to cover the entire screen so that the operator will have the maximal view. The solid waveform :add the waveform visual contrast and omission will hardly happen during the fast testing. The bulk memory can store up to 1000 data sets,including waveforms, curves,and parameters(including the traditional 1000 channels) Through echo wave-echo wave thickness measurement:the zero calibration can be avoided, and the net thickness of the base material can be directly measured through the coating. Wave Crest Memory: the real-time envelope can display the highest wave of the flaw and record the maximum value of the flaw to help the exact positioning and fast testing of the flaw as well as the qualitative analysis by the envelope waveform. Automatic Gain: automatically adjust the gain to the pre-set amplitude height. Warning Function: afferent echo/lost wave alarm Real-time Clock: automatically record the date and time of the stored waveform. Display Freeze: catching the waveform and the sound path data at any moment and removing the hatch after freezing to measure the echo wave parameters. Kjdpfxsttrc Ae Aabsnc Flaw Positioning: real time displaying sound path S, horizontal height X, depthY, and wave height H. Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: K00446, General data: • Year of manufacture: 11/2006 • Serial number: K00446 • Manufacturer: Citizen Machinery Co., Ltd. (Miyota Nagano, Japan) • Machine weight: 1,950 kg Overall dimensions: • Width: 1,610 mm • Depth: 1,850 mm • Height: 1,050 mm Technical specifications: • Max. bar diameter: 16 mm • Max. turning length: 200 mm • Main spindle speed: 15,000 rpm (2.2 / 3.7 kW) • Sub-spindle speed: 10,000 rpm (0.55 / 1.1 kW) • Control: Fanuc Series 31i • Number of axes: X1, Y1, Z1, Z2, C1, C2 • Full C axis on both spindles • High-pressure pump 20 bar, 2-channel Tool configuration: Front tool post: • T1–T5 – fixed tools • T11–T14 – driven tools (radial or axial) Tool holder: • T21–T24 – fixed tools for main spindle • T31–T34 – fixed tools for sub-spindle Equipment: • IEMCA Genius 118 Type 37 LL bar feeder (year of manufacture 2007, serial no. 020704BA04) • Guide bushings (complete set) • Fixed and driven tooling • High-pressure pump 20 bar / 2 channels Kedpfoxl Tkqsx Aabjnc Technical condition: The machine is in very good technical condition, fully functional and ready for operation. Regularly serviced and used in precision production. Additional information: • Nameplate: type K16 VIP, serial no. K00446, production date 11/2006, weight 1,950 kg. • Possibility of machine demonstration under power.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nitrogen of different products, to help in their grinding process (plastics for instance) or maintain their properties (food for instance). The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Knsdsq Rv Hhspfx Aabjc Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: excellent (used), Year of construction: 1994, pressing force: 12 t, bale length: 1,200 mm, bale width: 700 mm, bale height: 500 mm, bale weight: 450 kg, total length: 5,500 mm, The HSM AK 1200 automatic horizontal baler is equipped with an automatic binding system. The machine is in very good condition and regularly serviced. Manufactured in 1994, it was purchased from the original owner and is ready for use. The baler is started manually by a button or fully automatically using a photocell in the loading chute. Cutting blades mounted on the pressure plate cut the material and compress it in the baling channel. Once the desired length is reached (bale length adjustment is available), the bale is automatically tied after several baling cycles. The bale can be tied with wire, twine, or polypropylene tape. Ksdpfxoxmgm Uo Aabjnc Automatic baling system with a 12-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Baling pressure: 120 kN Bale size: 700 x 500 x 600 - 1200 mm Bale weight (depending on material): 280-450 kg Transport length: 5.5 m Weight: 3500 kg Drive power: 7.5 kW Transport costs depend on weight, volume, and, above all, distance. The following information is important for inquiries: Delivery address (postal code and city name), but further details require a phone call. Therefore, please inquire about transport costs and other delivery methods by calling us.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: PNG2 3201HE - 2200xxxxxx, cooling capacity: 354 kW (481.31 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,765 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 60.4 m³/h, pump pressure: 3.18 bar, total width: 2,190 mm, total length: 3,465 mm, total height: 2,425 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller Knjdpfx Aoxay H Ujabsc Type: Phönix PNG2 3201 HE Manufacturer: MTA S.p.A. The Phönix PNG2 3201 HE are compact water chillers suitable for outdoor installation. The unit is Eurovent certified. Equipment: - HE version, xDRIVE controller - Operating ambient temperature down to -20°C, EC brushless fans - Buffer tank and P3 pump - Compressor inlet/outlet valves - Filters at condenser coils - NO microchannels Cooling capacity (kW): 354 Chilled water temperature out/in (°C): 7 / 12 Flow rate (m³/h): 60.4 Available pump head (bar): 3.18 Ambient temperature (°C): 35 Refrigeration circuit: Refrigerant R513A, GWP 631, safety classification A1 Number of circuits: 1 Number of compressors: 1 Capacity control (%): infinitely variable from 25 to 100 Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption (kW): 170 Max. current (A): 277 Starting current circuit (A): 453 Protection class: IP54 Dimensions: Length (mm): 3465, Width (mm): 2190, Height (mm): 2425 Weight (kg): 3767 Connection: Victaulic DN 100 Serial no.: 2200xxxxx Year of manufacture: 2022 Condition: Visually excellent, technically ok Stock item, new Price: on request in EUR (plus VAT, ex works MTA Italy) – 12-month warranty (Subject to technical changes and prior sale!) Location: MTA, Tribano

Condition: used, Year of construction: 2023, HERBOLD zigzag classifier (gravity classifier) Type SZS 630/175 Sifting channel 630 mm wide Knsdjxgtqtepfx Aabsc With blower 7.5 kw Material: mild steel Condition: unused Year of construction 2023

Condition: used, Used Xante Excelagraphix 4200 for sale. Mechanically functional. The printer is currently out of ink and has been idle for almost a year. Print method: 5 Memjet drop on demand thermal inkjet print heads Knodpfx Aoxhbw Rsabsc Print width: 1067 mm Ink colors: five channels per printhead: CMYKK Print resolution: 1600 dpi x 1600 dpi or 1600 dpi x 800 dpi Print speed: up to 416 pcs. (1067 mm x 609 mm sheets per hour) Sheet feed: manual Ink type: dye-based aqueous inks Ink cartridges: 5 ink cartridges (C, M, Y, K, K) - 2 liters Media thickness: corrugated material thickness up to 15.9 mm RIP: iQueue

Condition: used, Power: 1 kW (2 HP) Rotation speed: 37 rpm Tank pressure: 14 bar Mixing and coating / impregnation unit by liquid insertion under vacuum or atmospheric conditions and at controlled temperature. Mixer Capacity: 500 L Motor power : 1,5 KW Mixing speed : 37 rpm Type of agitation : elongated blades Maximum pressure : – 1 Barg Max temperature : 200°C Air connection Liquid insertion / spraying connection 3 nozzles free to use if required. Mounted on a tilting frame Mixer rotation: manual. Double jacket Type: heating channels Max pressure: 14 barg Max temperature: 200°C Other Kodevlyp Repfx Aabjnc Sold with platform + stairs + feed hopper.

Condition: used, Year of construction: 2011, - Doosan-Fanuc CNC control - Breuning-Irco ILS RBK 10012 bar feeder - Samchully MH-212 315 mm 3-jaw chuck - Samchully MH-206 175 mm 3-jaw chuck - Year of manufacture 2011 Technical specifications Capacity: - Swing over bed: 780 mm - Swing over carriage: 630 mm - Recommended turning diameter: 255 mm - Maximum turning diameter: 376 mm - Maximum turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed (belt type): 3500 rpm - Spindle nose: ASA A2#8 - Spindle bearing diameter: 140 mm - Spindle bore Ø: 86 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Counter spindle speed (integrated): 6000 rpm - Counter spindle nose: ASA A2-5 - Counter spindle bearing diameter (front): 90 mm - Counter spindle through hole diameter: 62 mm - Min. counter spindle indexing angle (C-axis): 0.001 ° Tool turret: - Number of tool stations: 12 - Tool outer diameter: 25 mm - Boring bar diameter: 50 mm - Indexing time (1st swivel time): 0.15 s - Spindle speed of the driven tools: 5000 rpm Feed rates: - X-axis: 260 (72+188) mm - Z-axis: 830 mm - Y-axis: 102 (± 51) mm - Rapid traverse X-axis: 30 m/min - Rapid traverse Z-axis: 30 m/min - Rapid traverse Y-axis: 10 m/min Motors: - Main spindle motor: 22 kW - Subspindle motor: 7.5 kW - Spindle for driven tools: 5.5 kW - Feed motors (X/Z/Y axes): 3.0 / 4.0 / 3.0 kW - Coolant pump: 0.4 kW Electrical connection: - Power supply: 54.55 kVA Dimensions: - Machine dimensions WxHxD: 3600 x 2163 x 1863 mm - Machine weight: 6450 kg Breuning bar loader: Knodpfx Asuxua Isabsc - Max. bar diameter: 5 - 100 mm - Max. bar length: 250 - 1250 mm - Table surface: 650/900 x 1250 mm - Guide channels: 10 / 20 mm - Motor power: 2.0 kW

Condition: like new (used), Year of construction: 2023, BODOR m3 – fiber laser metal tube cutting machine Function&parameter list Tube size range-Square tube 25 - 356mm, I-beam 10#-22# Option the special jaws, I-beam 100-320mm; Hea profiles 100-320mm Basic parameter (Metal Plate Cutting) Cutting Capacity (MaximumThickness): Carbon Steel 18 mm Basic parameter (Metal Plate Cutting) Cutting Capacity (MaximumThickness): Stainless Steel 18 mm Operation parameter Shortest remaining material - no waste of materials Max. length of machinable tubes 12000mm Maximum tube weight: 800kg Overall sizes: 27430mm×2710mm×3160mm Machine weight: 16000kg Positioning accuracy: 0.06mm/m Repeated positioning accuracy: 0.04mm Max. speed of chuck with no-load 75r/min Max. speed of chuck feed axis 80m/min Max. speed of laser head moving axis 60m/min Max. acceleration of chuck feeding axis 1G Maximum acceleration of laser head moving axis 0.6G Max. speed of Z-axis 60m/min Total power capacity/current with 12KW source Total power capacity/current with 6KW source 123KVA/156A Total power capacity/current with 3KW source 108KVA/137A Total power capacity/current with 1.5KW source Bodor's laser has a conversion rate of up to 35%, which is significantly higher than its domestic general counterparts' 25% and far higher than CO2 lasers' 5 10% electro-optical conversion rate. As a result, power consumption and operating costs can be significantly reduced, and the productivity will be improved. Unlike CO2 laser, fiber laser does not consume laser-generating CO2 gas and other auxiliary gases (such as helium, nitrogen, etc.) Adopting semiconductor modular and redundant design, fiber laser has compact structure with no optical lens in the resonant cavity. Simpler repair and maintenance, lower failure rate and lower operating cost The central wavelength of an optical fiber laser is 1080 nm, or one-tenth the wavelength of a CO2 laser. The processing costs are lowered to a minimum since the output beam has superior quality, a larger power density, and is easier to absorb by metal materials. Optical fibre laser transmitted through the whole machine with simple optical path, stable structure. External optical path is maintenance-free. Nesting software compatible with Tekla Bodor Nest supports direct NC1 files import. Bodor Nest Tube supports Tekla online import. Compatibility: compatible with various versions of Tekla software. Auxiliary loading device Integrated material table, material selection and loading function. After placing the raw materials at according workstation, it can complete the cyclic loading of round , square, rectangular pipe, channel steel and I-beam, which can significantly improve the processing efficiency and reduce labour cost. Fume filter for Laser Cutting Machine Video: Price: 209.700 Euro + VAT, negotiable, ExWorks Arad /Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Knodpfxswzxbcj Aabjc Subject to errors, changes and prior sale / We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana.

Condition: like new (used), Year of construction: 2024, operating hours: 150 h, functionality: fully functional, Under 150 spindle hours!!! Including HAIMER Power Clamp Economic Plus NG shrink fit device, year: 2024 Including tool holders, clamping devices, and tools Manufacturer: DMG MORI SEIKI Model: DMU 50 3rd Generation, Stealth Design Control: CELOS with HEIDENHAIN TNC640 Year: 2024 Operating hours (approx.): Spindle hours: 140 h, Power-on hours: 790 h EQUIPMENT: - Swivel rotary table, simultaneous - Direct measuring systems and plane transformation in B and C axes - Scraper belt chip conveyor with cleaned gap sieve - Internal coolant supply (IKZ) - Coolant/air blow-off switchable via M-function - Rotating inspection window - Rinsing gun for chip removal - Oil and emulsion mist extractor - Infrared probe, Renishaw Blue Power Probe Kit - Laser tool measurement Renishaw NC4 - Tool length and diameter measurement - Automatic cleaning of the measuring system by air blast - Calibration arbor for tool measurement Knedpsxgh H Nsfx Aabsc - 3D quickSET - Quick stop for machine protection, MPC – Machine Protection Control - Automation interface, Profibus M65 - Automatic loading door - Work table with 4-channel rotary feedthrough - Machine-side automation software interface - Electronic handwheel - RMS sensor, internal handling - Digital Manufacturing Package - Messenger V4 - Service Agent - Direct path measuring systems in all axes TECHNICAL DATA: Travel paths: X: 650 mm, Y: 520 mm, Z: 475 mm Clamping area: D630 x 500 Swivel range: -35 to +110° Rotary axis: 360° Rapid traverse: 42 m/min, direct drive Tool holder: HSK-A36, BIG-PLUS compatible, speedMASTER® motor spindle Spindle speed: 20 – 20,000 rpm Spindle power: 35 kW/25 kW (40/100% duty cycle) Spindle torque: 130 Nm/86 Nm (40/100% duty cycle) Tool magazine: 60 slots, incl. setup aid for loading This used machine can be inspected under production conditions. All information without guarantee – sale excludes any guarantees and warranties. Subject to prior sale. Our general terms and conditions of sale and contract apply.

Condition: used, Year of construction: 2023, HERBOLD zigzag classifier (gravity classifier) Ksdexgrzwopfx Aabsnc Type SZS 630/175 Sifting channel 630 mm wide With blower 7.5 kw Material: mild steel Condition: unused Year of construction 2023

Condition: ready for operation (used), Year of construction: 2018, A digital UV flatbed printer Fuji is available. Rigid material: max. dimensions X/Y: 1250mm/2500mm, max. material thickness: 50.8mm, max. printing dimensions X/Y: 1260mm/2510mm, max. material density: 34kg/m². Roll material: max. printing width: 2190mm, roll width range: 900mm-2200mm, max. roll weight: 50kg. Ink type: KN series/KV series, channels: 5, colors: CMYK/white. Droplet size range: 6pl-42pl, min. print resolution: 1200dpi, print modes: 6, max. printing speed standard/roll: 22.8m²/18.9m²/h. Machine dimensions X/Y/Z: approx. 4100mm/2000mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. The machine is ready for shipment and cannot be demonstrated. Knjdpfx Aaoxnz U Njboc

Condition: used, mileage: 41,000 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,190 kg, first registration: 05/2021, emission class: euro6, color: blue, number of seats: 6, Year of construction: 2021, total length: 6,156 mm, total width: 2,099 mm, total height: 2,303 mm, Equipment: air conditioning, had accident, * SALE IN PARTS – Mercedes Benz Sprinter 215 chassis available for dismantling and parts. * Chassis Number: W1V9072231N142266 * Color: Gentian Blue 5361 * Engine: 110 kW / 150 HP (A6540103104), 6-speed manual transmission (A9062603402) * Rear axle, wheels, body parts (passenger door, rear doors left and right, bonnet/hood with minor dent) * Interior trim: driver & passenger seat, rear bench, and all remaining interior equipment and much more * ...Just browse the pictures and inquire... * Mercedes Benz 215 double cab / chassis – accident vehicle – * NOT DRIVABLE – engine and gearbox are intact – * For 2.70 m dropside bed and towbar – 7 seats – AC – manual transmission – * Diesel – displacement: 1,950 cc – 110 kW / 150 HP – Euro 6 – green emissions sticker – * Vehicle immediately available and ready for collection – * Please arrange an appointment for viewing – * Contact person: Mr. Andreas Vogel * The information provided online is non-binding and for descriptive purposes only. * They do not constitute guaranteed features. * The seller is not liable for typing or data transmission errors. * Subject to change, error, and prior sale. * Special equipment: Passenger airbag, 13-pin trailer socket, MB audio system radio with USB and Bluetooth hands-free, DAB tuner (digital radio reception), chassis: stabilization level I, 250 A alternator, additional master key, comfort suspension, ladder carrier behind cab, fog lamps with cornering light, spare wheel with road tires, spare wheel holder under frame rear incl. jack, interior rear-view mirror, rear wall with window, rear mud flaps, front mud flaps, seat belt warning system (passenger), storage box left and right under bed/body, USB port in center of dashboard (charging only), jack, warm air channel to loading/passenger compartment, heat-insulating glazing (windscreen with top shade band), auxiliary heating (hot water) Other equipment: Overhead shelf above windscreen, storage compartment under front passenger side of dashboard, rear tow eye, adaptive brake light, driver airbag, hill start assist, exterior mirrors electrically adjustable and heated (both sides), outside temperature display, automatic light activation, assistance system: crosswind assist, exterior noise reduction, body/structure: double cab dropside, communication module (LTE) for digital services, main fuel tank: 71 liters, steering wheel (mechanically adjustable steering column), headlight range control, truck registration, side marker lights, Mercedes-Benz emergency call system, engine: 2.0 liter – 110 kW CDI CAT, wheelbase 3665 mm, low emissions per Euro 6d-TEMP, SCR system (AdBlue technology), seat belt warning system (driver), seat upholstery: fabric, seats in cab: adjustable passenger seat, seats in cab: adjustable driver’s seat, steel rims 6.5x16, start/stop system, AGM battery 92 Ah, permissible gross weight 3.19 t Knodpfx Ajxpb A Ajaboc

Condition: used, Year of construction: 2012, - Doosan-Fanuc CNC control - Extended spindle bore 102 mm - Breuning-Irco ILS RBK 10012 bar feeder - Samchully MH-212 315 mm 3-jaw chuck - Samchully MH-206 175 mm 3-jaw chuck - Year of manufacture 2012 Technical specifications Capacity: - Swing over bed: 780 mm - Swing over carriage: 630 mm - Recommended turning diameter: 255 mm - Max. turning diameter: 376 mm - Max. turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed (integrated): 4000 rpm - Spindle nose: ASA A2#8 - Spindle bearing diameter: 140 mm - Spindle bore diameter: 102 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Counter spindle speed (integrated): 6000 rpm - Counter spindle nose: ASA A2-5 - Counter spindle bearing diameter (front): 90 mm - Counter spindle bore diameter: 62 mm - Min. counter spindle indexing angle (C-axis): 0.001 ° Tool turret: - Number of tool stations: 12 - Tool outer diameter: 25 mm - Boring bar diameter: 50 mm - Indexing time (1st swivel time): 0.15 s - Spindle speed of the driven tools: 5000 rpm Feed rates: - X-axis: 260 (72+188) mm - Z-axis: 830 mm - Y-axis: 102 (± 51) mm - Rapid traverse X-axis: 30 m/min - Rapid traverse Z-axis: 30 m/min - Rapid traverse Y-axis: 10 m/min Motors: - Main spindle motor: 22 kW - Counter spindle motor: 7.5 kW - Spindle for driven tools: 5.5 kW - Feed motors (X/Z/Y axes): 3.0 / 4.0 / 3.0 kW - Coolant pump: 0.4 kW Electrical connection: - Power supply: 54.55 kVA Dimensions: - Machine dimensions WxHxD: 3600 x 2163 x 1863 mm - Machine weight: 6450 kg Kodpfeuxt Rxsx Aabsnc Breuning bar loader: - Max. bar diameter: 5 - 100 mm - Max. bar length: 250 - 1250 mm - Table surface: 650/900 x 1250 mm - Guide channels: 10 / 20 mm - Motor power: 2.0 kW

Condition: excellent (used), Year of construction: 2008, For sale complete PVC carpentry production line, brand URBAN, composed of: *1. Welding machine at 2 ends; URBAN brand, model: AKS 5305-FF, serial number: 53372, year of manufacture: 2007, perfect working condition; *2. Channel milling machine; URBAN brand, model: WS 103, serial number: 790, year of manufacture 2007, perfect working condition; *3. 2-headed saw: brand RAPID, model DGS 100, serial number: 004606128, year of manufacture 2010, sold together with vacuum cleaner with bags, perfect working condition; *4. MACC rebar cutting saw, model NEW 275, serial number: 88266, year of manufacture 2008, perfect working condition; *5. Pantograph brand URBAN, model MLA A23 – 100466321S, serial number: 528-0, year of manufacture: 2008, perfect working condition; 6. Upright milling machine: URBAN brand, model M7CRH-100149891, serial number 559, year of manufacture 2008, perfect working condition; *7. De burring machine with 2 groups of cutters; brand URBAN, model SV 280, serial number: 29342, year of manufacture 2008, perfect working condition; *8. Saw for cutting sticks: brand URBAN, model GLS 102; serial number: 102015; year of manufacture 2010, perfect working condition; The production capacity of the line is 30-50 units/8h (depending on the number of people serving the line). The line was used very little from 2010 to 2014, and not at maximum capacity. We can also sell individual machines on request from the line. Knedpfx Asucl Dcjabsc Net price complete line 33.500 Euro + VAT, negotiable, FCA Oradea.

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Kjdoucgr Ispfx Aabsnc Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, bore capacity in steel (diameter) 30 mm throat 270 mm bore stroke 125 mm 4 Motor output 9 speeds 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display Kodpfxeun Um Es Aabenc * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice