Used Chimney for sale (113)

Condition: new, Year of construction: 2026, Heat output / nominal heat output: 16.5 kW For rooms up to approx. 300 to 400 m³ (according to DIN 4108) Flue pipe outlet: rear side (standard) Flue pipe: Ø 180 mm Filling chamber volume: 80 ltr Required chimney draught min. 12 Pa Dimensions of the filling opening (L x W) 300 x 340 mm Weight: 370 kg Nwsdpfx Aedlmn Heh Rjd Efficiency 85,88 Energy efficiency class: A+ The EWI-A 15 space heaters are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the 1st BImSchV (Federal Immission Control Ordinance) stage 2.

Condition: excellent (used), Hall heating system with Rlco gas burner. An oil/diesel burner can also be used if needed. Chimney is included—everything is complete. For further questions, please contact us. Nwodpfx Aod Tt Amsh Rjd In very good condition.

Condition: good (used), Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Top thread: M12 Njdpfed Nnhcsx Ah Rswd -Groove: 13 x 134 mm -Dimensions: 220/330/H280 mm -Weight: 28 kg

Condition: good (used), clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Clamping table: with T-slots -Groove width: 20 mm, groove spacing 69 mm -Guide rail: with rack -Dimensions: see photos / technical drawing -Dimensions: 3300/285/H185 mm -Weight: 397 kg Nwodpfx Ahsvmm Aaj Rjd

Condition: used, Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Surface: scraped Nododf U Syspfx Ah Rswd -Material: cast -Dimensions measuring chimney: 450 x 450 x 3005 mm -Wall thickness: 30/80 mm -Holes: Ø 52 mm -Dimensions base plate: 1080 x 1080 mm -Transport dimensions box one: 3310/645/H770 mm -Transport dimensions box two: 1160/1080/H350 mm -Weight: 1190 kg

Condition: excellent (used), Year of construction: 2007, For sale is a complete, containerized heating plant from the renowned manufacturer Kohlbach, with an output of 1500 kW. The system was in operation until recently and is in excellent technical condition. As part of a comprehensive overhaul, a completely new combustion chamber lining was installed and the air supply systems were renewed. Technical specifications: - Containerized design (no separate building required) - 19 m high chimney stack - Electrostatic precipitator for fine dust separation - Wood chip storage with moving floor - Hydraulic stoker for automatic fuel feeding - Complete piping system with central heating pumps Fuels: Suitable for various types of biomass such as bark, wood chips, and sawdust—ideal for efficient and environmentally friendly operation. Key benefits at a glance: - Ready for immediate operation - No building permit required (mobile) Nwodpjyha Szsfx Ah Rsd - TÜV certificate (Germany, valid, issued 2023) - Very good overall condition Price on request – please contact us for more information or to arrange an on-site inspection.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Nwsdpfefz I Rxsx Ah Rod Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ Nwodefzb Rcjpfx Ah Rjd 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2026, condition: new, machine/vehicle number: 1234, Mobile fruit and vegetable processor unit Specifications: -Performance: end product 300 L/h maximum -Input capacity: 300kg/h -Electric demands: 10 kW, 400 V -Heating performance: 30 kW -Fuel: propane, PB, natural gas -Flue gas outlet: 60/100mm concentric chimney -Material: WNr. 1.4301, AISI 304 stainless steel -Dimensions: 6100x2200x2800 mm -Weight: ~2,3 tons (depends on the accessories and options) -IP65 certified electronics -Heat exchanger: soft water -Connections: DN 25 BUILT-IN MACHINES: -Custom made washer with grinder (openable, tiltable) -MKSP 300 belt press (automatic) -MKT 100 juice collector tank with pump (automatic) Nedpfx Ahoiu Hz Hs Rswd -Puffer tanks -MKPAG 300 gas fuelled pasteurizer (automatic) -BB TOP 180 semi-automatic filler or Bottle filler with 2 heads -Air compressor -High pressure washer Galvanized steel chassis with aluminium anti-slip floor, and aluminium superstructure. The two sides and the rear side is openable in 90° angle. The openable washer recieves the fruits. After the grinding and pressing, the automatic juice collector towards the juice to the puffer tanks. Then the automatic pasteurizer does the heat treatment, and in the final step, the operator fills the end product in bags or bottles. The machine is as automatic as possible, it needs only 2 workers to operate. Very easy to clean. Requires minimal maintenance. Options: -Diesel generator (10kW) -3,2 tons trailer -300L freshwater tank -300L waste water tank -Filtration system -Tent system -Custom graphic design on the outer surface

Year of construction: 2026, condition: new, Specifications: - Performance: 700 L/h (From 20°C to 80°C) - Electric demands: 1 kW, 230 V, 6 A, monophase - Heat performance: 80kW (diesel burner) - Fuel: diesel fuel - Fuel consumption: 7,5 L/h Nwjdpfefhb Itex Ah Red - Flue gas outlet: 110mm chimney - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 750x1700x1170 mm - Weight: 380 kg - IP65 certified electronics - Heat exchanger: soft water - Connections: DN 25 - Thermometers: 2 pcs - With automatic by-pass valve - Automatic heat control, very easy to clean - Automatic operation - flowthrough type - With 4pcs vibration-free feet - It requires minimal maintenance Available options: Two filler superstructure: BB top 180 semi-automatic BiB filler, 6 head bottle filler, puffer tank with level switches

Condition: like new (used), Year of construction: 2012, functionality: fully functional, power: 50 kW (67.98 HP), type of input current: AC, pressure: 3 bar, input voltage: 230 V, nominal heat output: 50 kW (67.98 HP), heating capacity: 50 kW (67.98 HP), temperature: 95 °C, tank capacity: 175 l, operating pressure: 3 bar, Equipment: type plate available, We are offering this used Guntamatic BMK 50 log wood gasification boiler, year of manufacture 2012. It is suitable for logs up to 50 cm in length. Included are 2 insulated buffer tanks from Guntamatic (1,600 liters each), pipework with mixing valve, and a Kroll heating blower. Nedjyf U R Hepfx Ah Rewd Type: BMK 50 with automatic ignition Article number: 066-100 Serial number: 315972 Year of manufacture: 2012 Rated output: 20-50 kW Boiler class: 3 Electrical connection: 230 V Electrical current: 13 A Permissible operating pressure: 3 bar Maximum operating temperature: 95 °C Chimney draught: 0.2 mbar Water volume: 175 l Fuel: log wood 1/2 m, natural The system has only been in operation for 4 weeks. Includes 2 insulated buffer storage tanks (1,600 l each) and one Kroll blower. The unit is in excellent, as-new condition and can be inspected in operation. Disassembly and transport are at the buyer's expense. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2005, Mawera FSB 700 – Fully automatic biomass boiler with moving grate (wood chips), year of manufacture 2005, for sale. Nsdpsya Ngxefx Ah Rewd The fuel feed is hydraulic, not by screw conveyor. Components: Boiler body, combustion chamber and heat exchanger, complete hydraulic feed unit, flue gas fan, multi-cyclone, ash separator, chimney piping, control system, electrical control cabinet, operating manual. The system can be inspected in operation on site. Dismantling is possible after the heating season. Condition: Excellent Manufacturer: Mawera Model: FSB 700 Year: 2005 Video available via Whatsapp

Condition: new, - NEW -Kanuk® OriginalHot air ovenNominal heat output: 15.4 kWDimensions: 80 x 58 x 95 cmheatable room volume: 450 m³Efficiency: 83.4%Log length: 48 cmFlue pipe connection: 160 mmTotal power (kW): 15.4Dimensions H x W x D (cm): 80/58/95Space heating capacity (m³): 450Flue pipe connection (mm): 160Flue pipe connection: top / rear viewing window (cm): 28 x 15Efficiency (%): 83.3Weight (kg): 148Exhaust temperature (° C): 216Log length (cm): 48Wood consumption (kg / h): 3.9Exhaust gas mass flow (g / s): 14.28Minimum chimney draft (Pa): 16Exhaust throttle valve: ing chamber H x W x D (cm): 40 x 44 x 49.5Ash box: e 1 (self-closing door): OptionalWindow flushing: YesBimSchV Level 2: YesLogs, wood briquettes: YesDIN EN number: 13240Brown coal briquette: No AT §15a B-VG Norm: YesPrimary, secondary, tertiary air: yesCE mark: YesOutside air connection (mm): 100LRVSwitzerland: yesNo. 2100102 Njdjvwf Rkjpfx Ah Rowd

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Ersa Hotflow 3/20 Year of manufacture: 04/2011 Refurbished in 2024 Dimensions: Length: 6,265 mm Width: 1,201 mm Height: 1,375 mm Weight approx. 1,900 kg Conveyor System: Working width: 45–516 mm, automatically and steplessly adjustable Clearance height: +35/-37 mm Center support, automatically and steplessly adjustable Conveyor speed: 20–200 cm/min Pin chain conveyor available with 3 / 4 / 5 mm pin length options Nwjdpfsyf N Uysx Ah Rjd Process Zone: Process length: 4,840 mm Heated length: 3,725 mm Cooling length: 1,115 mm Heating System: Up to 20 convection heating cassettes (Preheating zone up to 14 cassettes, reflow zone 6 cassettes) Airflow per module adjustable up to 500 m³/h Nominal power per module: 3.3 kW Nominal power last module: 4.5 kW Cooling: Up to 2-level cooling zone (ambient air) Electrical Data: 400 V, 3 phases, N, PE, 50/60 Hz Continuous operating power: approx. 12–16 kW Exhaust: Extraction capacity: Chimney at system inlet 300 m³/h; chimney at system outlet 400 m³/h, both with monitoring function

Condition: good (used), Year of construction: 2015, machine/vehicle number: AS4002/10, functionality: fully functional, This kiln is manufactured by the Italian company SITI and is suitable for firing sanitary ceramics. The guaranteed firing temperature is 1220-1230 degrees Celsius. It can also be used for corrective firing of sanitary ceramics. The kiln comes with 10 complete cars equipped with heat-resistant accessories. Additionally, it includes a manual shuttle for kiln cars and a hydraulic lifting table for loading pieces. Furthermore, there are 4 stainless steel exhaust chimneys included. The furnace was in operation for 3 years and was professionally dismantled in 2021. It is currently stored in Ludinovo, Kaluga Region, Russia. Nwsdpfeu S E Umsx Ah Rsd

Condition: used, Frame size: 4100 x 2520 mm Nwsdpfxoxctwls Ah Red Cabin size: 3000 x 2520 x 2500 mm high + chimney: 600 mm

Condition: used, Frame size: 4100 x 2520 mm Cabin size: 3000 x 2520 x 2500 mm high + chimney: 600 mm Nedpjxct Anefx Ah Rewd

Condition: used, Year of construction: 1996, Kohlbach SU 1200 chip-fired boiler complete system, stepped grate firing (suitable for low-quality fuel), hot water system with max. temperature 120°C, output 1200kW, year built 1996, including pneumatic cleaning system, flue gas dedusting with multicyclone separator, flue gas fan, flue gas piping, chimney system – height 26m, two-part bolted construction (2 x 13m), automatic ash removal downward into ash bin, hydraulic feeder, hydraulic cross-pusher rod, walking floor with 3 pusher rods, total length 11m, total width 5.7m, control system included. The system is fully operational and, for its year, in very well-maintained and good condition. Dismantling must be carried out by the purchaser. Dismantling scheduled for June 2026; the boiler house roof will be opened on site to lift out the heating unit using a crane. The crane can approach up to approx. 5m from the roof opening. Njdpfx Aevytfuoh Rewd

Year of construction: 2023, condition: new, APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry Nwjdpjht Uwpofx Ah Rod - foundation - posts - floor slabs - chimneys - scafa gutters - roadway gutter covers ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. COMPONENTS: - Press unit - Pallet space - Pallet feeding line - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pallet discharge line with freshly moulded products - Hydraulic unit - Electrical control panel with PLC. TECHNICAL FEATURES: - Pallet dimensions: 1240x750x45mm - Useful surface: 1100x630mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm - Cycle time: 35 - 60 seconds - Total Installed power: 30,00 kW MAIN DIMENSIONS : - Width: 2,10m (without hydraulic unit and control panel) - Length: 8,00m - Height: 3,10m - The hydraulic unit and control panel are placed at the side, at a distance of 1.00m from the chassis and occupy a surface area of 2m2. - Machine mass 6,000 kg

Year of construction: 2024, condition: new, ~ SPEED 700 , SEMI AUTOMATED ~ APPLICATIONS Production of: - paving - kurbs - concrete blocks for: -masonry -foundation blocks -posts, floor slabs -chimneys, -gutters -roadway gutter covers. ADVANTEGES : - Vigorous vibration coupled with hydraulic pressing of the concrete guarantees high quality concrete products. - Vibrators mounted on the counter mold play an important role in concrete compaction. - Chrome-plated pipe guide columns - Teflon-coated sliding bearings - Our wide range of molds can provide a diverse production. - Reliable mechanical and hydraulic systems. OPERATE : ~ Mostly manual: -Drawer(back/ fort -Mold (up/down) -Counter Mold (up/down) ~ Commands executed automatically: -start/ stop vibration when reaching height -start/ stop pallet feeding exhaust line stop) COMPONENTS: 1.) the press 2.) pallet stacking space 3.) pallet feeding line 4.) concrete bunker 5.) drawer (1) for concrete mold feeding 6.) pallet discharge line with fresh products 7.) hydraulic unit 8.) lever panel for the machine operator TEHNICAL FEATURES: - Pallet dimensions: 700x670x40mm - Active surface: 640x640mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm - Hydraulic pump flow: 40 l/min - Cycle time: 60 -100 sec (Semi-automatic version) - Cycle time: 30 – 50 sec (Fully automated version) Nodpfehufyhox Ah Rjwd - Installed power: 15.50 kW - Hydraulic power unit: 7.5 kW - Vibrating table vibrators: 6.00 kW + 0.28 kW - Counter mold vibrators: 0.80 kW - Discharge line: 0.55 kW - Supply voltage: 380V OVERALL DIMENSIONS: Width: 1.60m (without hydraulic unit and control panel) Length: 5.60m Height: 2.85m Machine mass (without mold): 4,000 kg Approx. mold mass: 250 - 300kg ADDITIONAL PRODUCTS / OPTIONAL: 1.) AUTOMATIC OPERATION : ( + 6.300 euro ) - PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation Reduces the time of a production cycle, higher productivity (30 -50sec) 2.) SECOND DRAWER (2) for finishing layer for paver and kurbs + BUNKER ( + 3.900 euro ) 3.) CONCRETE MINISTATION SEMIAUTOMATED ( + 18.800 euro) Component parts: a.) Sand bunker 2 m2 + Volumetric dosing with conveyor belt + Vibrator b.) Gravel bunker 2 m2 + Volumetric dosing with conveyor belt c.) Electric control panel d.) Concrete Mixer MX 300 ( Fluid concrete: 300 liters Semi-wet concrete: 200 liters, 2.4 cubic meters of semi-wet concrete/hour ) 4.) AUTOMATIC LIFT (elevator) ( + 4.000 euro) 5.) CONVEYOR 6M , for transporting the concrete to the machine bunker ( + 4.000 euro) - Band width: 500mm - 7mm smooth rubber mat with 3 inserts - Motor 1.5kW (380V) PLEASE FOR THE COMPLETE OFFER SEND US AN EMAIL.

Condition: new, Applications: Production of concrete blocks for wall, foundation, pillars, roofs, chimneys. Production of concrete pieces for water drainage Advantages: optimal distance between the mould and the over-mould ensures a comfortable position for the operator - Handling the steering wheel requires minimal effort thanks to a gear force reducer; - Simple operation and maintenance professional vibrator with low power consumption Automated stopping of the vibration once demolding occurs Wide variety of molds - there is the possibility of installing moulds for high concrete elements (maximum 370mm)* Nwsdpfxsiwut Te Ah Rsd Technical specifications: Maximum mold dimensions: 800x500mm Maximum height of end product: 370mm Cycle duration: 60 seconds Supply power: 0.28kW Supply voltage: 220V Overall dimensions: 1.35x 1.55 x 1.7 m Machine weight (including a mold): 400 kg Vibrator rotation speed: 3000rpm Concrete consumption: 2 m3/hour Recommended concrete mixer: MX300L

Condition: new, Motorised concrete block machine Production of concrete blocks for use in: masonry, foundation, pillars, floors and chimneys. Nwjdpfx Ahshx N Nmj Rjd Powerful hydraulic pressing Operator seat Concrete bunker – 500 liters Automated lift of the counter mold Mold maximum dimensions: 1200x400mm Maximum height of concrete product: 200mm Cycle duration: 45 seconds Installed power: 5.5kW Supply voltage: 380V Overall dimensions: 2.2 x 2.0 x 1.85m Mass (including mold): 2000kg Vibrator motor rotation frequency: 3000rpm Dry concrete consumption: 4 cubic meters/hour

Year of construction: 2023, condition: new, 1.) Applications: Production of concrete blocks for: masonry, foundation, pillars, floor, belt, chimneys; gutters and gutter covers; 2.) Advantages: Nwodpfsiwxrgox Ah Rod - High productivity - the active surface of the mold 1200 x 800mm (12 masonry blocks 400x200x200mm) - Hydraulic actuation - Teflon bushing of the sliding bearings on the guide columns - Reliable mechanical and hydraulic systems. - Operator seat - Concrete hopper – 700 liters - Drawer for concrete supply to the mold – hydraulically operated - 2 vibrators on the punch plate - 4 electric motovibrators - mold vibration - Automatic stop of vibration when unpacking - Polyurethane coated wheels + Hydraulically actuated wheel to change the direction of travel - Large variety of molds - Allows the installation of molds with a height of 370mm - can produce roadable ditches and open ditches 3.) Technical characteristics: - Maximum mold dimensions: 1200x800mm - Maximum finished product height: 370mm - Duration of a cycle: 60 seconds - Hopper capacity: 700 liters - Installed power: 15 kW - Supply voltage: 380V - Overall dimensions: 3.30 x 2.30 x 4.00m - Mass of the machine (with mold): 4000 kg - Vibration frequency: 3000rpm - Required amount of semi-dry concrete: 8 m3/hour - Recommended mixer: SAB6MC automated concrete station

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Superheated water boiler at 152°C, 1 Gcal/h, automatic feed, year of manufacture 2014 – manufacturer Sceat Italia - Heat output: 1,000,000 kcal/h - Pressure: 4 bar - Superheated water temperature: 152°C - Equipped with control thermostat, safety thermostat, thermometer - Working pressure: 4 atm Nsdpfxjw Ewafj Ah Rjwd - Fuel: wood waste, sawdust - Flue gas evacuation system: cyclone, forced draft fan, connection ducting - Furnace: lined with high alumina refractory bricks – prepared for wet materials from processing. Special refractory bricks laid with high alumina content cement, suitable for high humidity – optimized for the combustion of sawdust from log cutting Flue gas extraction system - Belt-driven fan - Multicyclone separator - Connecting ducts: boiler-multicyclone, multicyclone-fan, fan-chimney - Chimney Included accessories - 2 safety valves - Cast iron discharge valve - Operating thermostat - Safety thermostat - Thermometer - Safety pressure switch - Pressure switch guard - Manometer with 3-way valve - Alfa 10 diameter 50 discharge valve Flue gas removal system - Cyclone for collecting solid combustion particles before flue gases are released into the atmosphere - Smoke extractor/fan to improve combustion by increasing draft in the boiler, essential if a smoke treatment system is present or when significant flow losses occur - Painted carbon steel alloy connection ducts between boiler and multicyclone, and between multicyclone and fan - Electrical panel serving the feed electropump, static level, pressure switches, minimum level probe for the smoke extractor fan, and all devices serving the generator - Chimney made of carbon steel

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22100304, input voltage: 400 V, total length: 10,900 mm, total width: 2,840 mm, total height: 1,142 mm, overall weight: 4,000 kg, input current: 22 A, Equipment: documentation/manual, Tesoma Compact-Eight-G-18-HH-SR – Tunnel Dryer (Gas Connection) Nwedpfxsvxr D Ho Ah Rsd Designed not only for screen printing but also ideal for digital print products (DTF, transfers). The price includes the exhaust chimneys (each approx. 7.5 m) in double-walled stainless steel construction. The machine is assembled and connected. An on-site inspection is possible by appointment. The price refers only to the assembled system. The price does not include dismantling, (re)installation, or delivery costs. Upon request, contact can be made with a service provider who can arrange dismantling, transport, and installation if needed.