Used Chiron Fz22L for sale (97)

Condition: ready for operation (used), Year of construction: 1997, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: 179-49, travel distance X-axis: 2,000 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc OMC, total height: 3,040 mm, total length: 3,920 mm, total width: 2,400 mm, table width: 550 mm, table length: 2,700 mm, overall weight: 7,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,500 rpm, coolant supply: 30 bar, number of slots in tool magazine: 40, tool length: 250 mm, tool diameter: 75 mm, input voltage: 400 V, FZ 22 long-bed, fully functional and still in daily operation. The machine is being replaced and can be inspected at any time during regular opening hours. Godpfoy R D Dusx Anxsit

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M Gjdpfequhbgox Anxjit serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, Equipment: chip conveyor, Long-bed pendulum machining Control: 3-axis CNC path control, Siemens 840 D (E305-1) TECHNICAL DATA Working area X-axis 2600 mm Y-axis 520 mm Z-axis 630 mm Pendulum operation 2 x 860 mm Table clamping surface 3440 x 570 mm Gjdpfx Anoxwwc Uexsit Automatic tool changer Number of tools 40 Tool holder (DIN 69871) SK 40 Tool change time 2.0 sec Max. drive power 18.5 kW Speed range up to 10,500 rpm EQUIPMENT/ACCESSORIES - Automatic tool changer ATC 40 - Long part machining/pendulum machining (center partition not included) - Splash guard enclosure with sliding doors, electrically secured, incl. machine light - Coolant unit with high-pressure pump and paper band filter Tank capacity 500 l, normal pump 200 l/min at 1.5 bar High-pressure pump 50 l/min at 20 bar, incl. double switch filter - Through-spindle coolant supply (IKZ) - Chip conveyor with ejection height 1050 mm - Rinsing gun - 1 NC rotary table with chuck - 1 hydraulic tailstock - 1 clamping bridge - Electronic handwheel - Mounting elements - Documentation

Year of construction: 1988, condition: ready for operation (used), Verfahrweg X/Y/Z: ca. 1600mm/400mm/425mm, Tischdimensionen X/Y: 1500mm/400mm, Werkzeugaufnahme: SK40, Werkzeugplätze: 20, Spindeldrehzahl: 5000U/min, Maschinendimensionen X/Y/Z: ca. 4000mm/2500mm/2900mm, Gewicht: ca. 7000kg, Steuerung: Siemens Sinumerik System 3, Betriebsstunden: ca. 19855h. Inklusive ca. 12 Werkzeughalter. Documentation available. Eine Besichtigung vor Ort ist möglich. Giodpfxswaa Ins Anxjt

Condition: defective spare-parts repository (used), functionality: not functional, controller manufacturer: Siemens, table width: 470 mm, table length: 990 mm, overall weight: 5,500 kg, spindle speed (max.): 10,500 rpm, No reserve price – guaranteed sale to the highest bidder! Gedpoy Ni Agofx Anxjit Note: The machine is defective. The control system does not power up, so it requires repair or can be used as a source of spare parts. Otherwise, the machine is in good mechanical condition. TECHNICAL DETAILS Spindle speed: 10,500 rpm Table length: 990 mm Table width: 470 mm MACHINE DETAILS Control manufacturer: Siemens Machine weight: 5,500 kg

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 332-22, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller model: SIEMENS 840D, rotational speed (max.): 17,500 rpm, spindle nose: HSK63, General Manufacturer: CHIRON-WERKE GmbH & Co. KG, Tuttlingen Model: DZ15WM HS Type: 5-Axis Horizontal CNC Machining Center Configuration: Dual spindle, two work stations Year of manufacture: 2014 Serial number: 332-22 CNC control: Siemens Sinumerik 840D/DE Powerline Spindle & Performance Spindle interface: HSK-A63 (DIN 69893), dual spindle Max. spindle speed: 17,500 rpm Simultaneous axes: 5 Rapid traverse (X/Y/Z): 60 / 60 / 60 m/min Positioning tolerance: ±0.01 mm Travel & Work Envelope X-axis travel: 630 mm Y-axis travel: 400 mm Z-axis travel: 360 mm Tool System Tool magazine: 2 × 32 chain positions (64 total) Max. tool weight: 5 kg (10 kg at reinforced positions) Max. tool diameter: 125 mm (140 mm with full magazine) Max. tool length: 300 mm Gisdpfey R Eywjx Anxjt Electrical & Hydraulic Systems Installed power: 58 kVA Operating voltage: 400 V / 84 A / 50–60 Hz Hydraulic system: FMB Blickle – Rexroth Bosch / Moog Hydraulic pressure: 250 bar Hydraulic spec: ISO VG 46, 160 L/min, 4 L tank Cabinet cooling: Rittal TopTherm SK 3305542 Dimensions & Weight Length: 2,500 mm Width: 2,900 mm Height: 2,800 mm Machine weight: 10,800 kg Transport: Standard flatbed truck

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, Vertical milling center Chiron FZ08W Fanuc 21i-M Max RPM: 15,000 rpm Gsdpexd T Rzsfx Anxsit High-pressure spindle through-cooling X = 300 mm Y = 250 mm Z = 250 mm The machine was originally supplied with 2 x 4th axis Peiseler RT 100, but the 4th axes have now been removed. Tool interface: HSK 32 ATC: 24 positions Serial: Yrzzng Machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I offer a 3-month startup warranty.

Condition: excellent (used), Year of construction: 2002, CHIRON FZ 15S with 4 axis in Perfect Condition Machine can be inspected any time under power Gijdpfxsrgqu Hj Anxet

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-89, Technical characteristics: - Machining workspace: X 550 mm; Y 400 mm; Z 360 mm - Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary divider head axes B, equipped with direct angular measuring system, max rotation speed 50 rpm, accuracy +/- 5" - Axis A swivel range: +/- 110° Gisdpfx Anexxi Rmexst - Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg - Rapid traverse rate: X/Y/Z 40/40/40 m/min - Distance between divider heads B1/B2: 250 mm - Spindle speed: 1–10,000 rpm - Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) - Automatic tool changer: 1x48 positions / chip-to-chip average 2.5 sec - Max. tool diameter: 82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Electrical specifications: - Supply voltage: 3x400V/50Hz - Installed power: approx. 45 kVA / 80A Dimensions: - Installation space: approx. 4.4 x 2.3 x 3.1 m - Weight: approx. 8,500 kg Equipment includes: - CNC control: Siemens 840D Power Line - Chip conveyor: Spring Knoll - Oil cooling system - High-pressure oil filtration system (max. 80 bar): Knoll HL 450/1200 - Shaft cooling system, guideways and control cabinet - 2 oil lubrication units - Oil mist extraction/recovery: LTA - Fire protection: Kraft & Bauer - Part presence P/Y detection: with low-pressure air sensors - In-process inspection: Marposs T25 - Tool holder presence detection in spindle - Documentation: incomplete Machine status: NOT OPERATIONAL: Hydraulic power unit motor burned out.

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-06, Technical Specifications: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + 1 rotary axis (rotary table A) and 2 rotary axes (B, indexer head) with direct angular measuring system, maximum 50 rpm, accuracy +/- 5 seconds # A axis swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min Giodpfx Anjxxivcoxet # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1–10,000 rpm # Spindle taper: DIN69893-HSK-A63 (with internal coolant) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max tool diameter: Ø82 mm / max. length 250 mm / 5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation area: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Powerline # Chip conveyor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, max. 80 bar: Knoll HL 450/1200 # Shaft, guideways, and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery: LTA AC3002 # Fire protection: Kraft & Bauer # Presence detection: with low pressure air sensors (part present) # In-process control: Marposs T25 # Tool breakage monitoring: Blum Novotech # Tool presence detection system in spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Cover for tool magazine # Tool magazine presence sensor (BERU)

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-88, Technical specifications: # Working area: X 550 mm; Y 400 mm; Z 360 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexing head, direct angular measuring system, max. speed 50 rpm, accuracy +/- 5" # A-axis swivel: +/-110˚ # Max. clamping/part size: Ø247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between dividing heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools, tool-to-tool average 2.5 sec # Max. tool diameter: Ø82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Electrical system: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Power Line # Chip conveyor: Spring Knoll # Oil cooling unit # Oil filtration system up to 80 bar: Knoll HL 450/1200 # Shaft, linear guide and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery unit: LTA AC3002 # Fire suppression: Kraft & Bauer # Part presence check with low-pressure air sensors Gisdpfoxw Uplex Anxot # In-process control: Marposs T25 # Tool support monitoring system at spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Operator protection screen damaged – operator panel functional # Tool magazine chain # Ballbar X # Ballbar Y # Pullbar spindle # Axis drive power supply X # Axis drive power supply Y # Main drive power supply # Complete hydraulic unit defective

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-09, Technical Characteristics: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + rotary table axis A and 2 rotary axes B, equipped with an index divider head with direct angular measuring system, max. rotation speed 50 min⁻¹, accuracy +/- 5" # Axis A swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max. tool diameter: Ø 82 mm / max. length 250 mm / max. weight 5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Total installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment Includes: # CNC control: Siemens 840D Power Line # Chip extractor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, up to 80 Bar: Knoll HL 450/1200 # Cooling system for spindle, linear guides, and control cabinet # 2 independent oil lubrication systems # Oil vapor extraction/recovery system: LTA AC3002 # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process measurement: Marposs T25 # Tool breakage detection: Blum Novotech # Tool holder detection system in spindle # Documentation: incomplete Gjdpfoxwmvkex Anxeit Machine Condition: NOT OPERATIONAL # Hydraulic oil leakage at Peiseler rotary table # New hydraulic pump available in stock

Condition: new, Chiron 1122242 / 562 006 HSK-A63 coupling gripper SN: H308, unused, 100% functional, scope of delivery as per photos. Gisdpfx Aoy Np Iponxst

Condition: new, Chiron 1122242 / 562 006 HSK-A63 clamping gripper SN: 9F08 with 5721028100 / 95281 tool arm 1088539/00 CW49/15, unused, 100% functional, scope of delivery as per photos. Gisdpfx Aney Np Ivsxjt

Condition: excellent (used), Year of construction: 2015, operating hours: 14,000 h, Chiron Mill FX 800 machining center with 148-position background magazine TECHNICAL DATA Travel, X-axis: 800 mm Travel, Y-axis: 630 mm Travel, Z-axis: 550 mm Swivel axis: +- 120 ° Rotary axis: 360° Rapid traverse speed, X-axis: 60 m/min Gsdpfxotvz Azj Anxeit Rapid traverse speed, Y-axis: 60 m/min Rapid traverse speed, Z-axis: 60 m/min Spindle, max. torque: 180 Nm Spindle power: 17.0 - 47.2 kW Spindle, speed: 12`000 rpm Tool holder: HSK-A 63 Rotary table, diameter: 280 mm Thread and fitting hole pattern M16 x 15 H7 X 50 Load capacity: 320 kg SCOPE OF OFFER U.A: (list not exhaustive): Chiron machining center, Year of construction: 2015 Knoll chip conveyor 750 K-1/150 BMF TPF 350S high-pressure pump Renishaw RLP40Q touch probe Receiver: Renishaw RMI-Q Mechatronic flow sensor SB0500 Background magazine, 148-fold Operating documentation Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 464-61, controller manufacturer: Siemens, controller model: Sinumerik, workpiece length (max.): 300 mm, workpiece diameter (max.): 200 mm, total height: 2,400 mm, total length: 3,200 mm, total width: 2,000 mm, overall weight: 22,000 kg, spindle nose: HSK-A32, number of slots in tool magazine: 12, mount diameter: 32 mm, tool length: 160 mm, tool diameter: 63 mm, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained machine from training workshop and demonstration. Fully functional and immediately ready for use. Equipped with NC indexing device, manufacturer: PEISELER, type: AWUP 100. Includes comprehensive machine documentation as well as 2 spare filters. Giedoy Sghlepfx Anxjt

Condition: repair required (used), Year of construction: 1991, operating hours: 40,000 h, functionality: limited functionality, machine/vehicle number: 109-43, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 4,000 m/min, feed rate Y-axis: 4,000 m/min, feed rate Z-axis: 4,000 m/min, nominal power (apparent): 13 kVA, torque: 35 Nm, controller manufacturer: Fanuc OMB, controller model: 9030556, workpiece length (max.): 220 mm, workpiece diameter (max.): 65 mm, total height: 2,600 mm, total length: 2,800 mm, total width: 1,800 mm, table width: 370 mm, table height: 900 mm, table length: 950 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 615 mm, number of slots in tool magazine: 12, input voltage: 380 V, Equipment: chip conveyor, rotational speed infinitely variable, Chiron Fz 12 S, year of manufacture 1991. Additional indexing device. Currently with a measurement system error on the B-axis. The machine can be inspected at any time during regular opening hours. Gsdpfx Aey R Dqhjnxoit

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: FANUC, controller model: Series 21i-M, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis CHIRON FZ 08 W was manufactured in 2001. It features a maximum spindle speed of 18,000 rpm and a robust tool interface with HSK-A40. The machine includes integrated pallet changer for efficient workpiece handling. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 08 W vertical machining centre we have for sale. Contact us for further details regarding this machine. • Condition: Machine is no longer functional and can only be used as a supplier of spare partsElectrical data • Kind of current: 3/N/PE ~ 50/60 Hz • Working voltage: 400 V • Control voltage: 230/24 V • Rating: 12 kVA • Rated current: 17 A • Fuse: 20 ASpindle • Spindle type: Water-cooled motor spindle • Max. torque: approx. 15 NmOther machine details • Workpiece changing system: Integrated pallet changer (W-type) • Maintenance intervals noted: 8h, 50h, 200h, 500h, 2000h, 6000h Gsdpfx Ansy Ex H Hsxoit • Lubrication requirements: INSK K11 / ALKANIA 2 (Shell)

Condition: good (used), Year of construction: 2013, If some parts shown by hand, that parts not come with machine. Technical data shown on picture. Gisdpfx Asy Awxpsnxot

Condition: good (used), Year of construction: 2006, Spindle 12000 TR:MN CN SIEMENS SINUMERIK 258-38. Number of hours on the counter: 85 642 hours total machine power 30 KVA stroke X 300 mm, stroke Y 400 mm, stroke Z 425 mm spindle speed 12000 rpm travel speed 60m/min Gijden D D Nhepfx Anxst tool attachment SA40 2 UNITS AVAILABLE

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Gisdpfxsgmi Uno Anxot Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ...

Condition: used, 5 axis: yes Milling and turning: yes 5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Gijdpfx Ansgph Rnexet Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle 20-12.000 min.’ – 140 Nm.12.000 RPM 12,5 KW/Max 34kW Swivelling head (CNC controlled) ± 100° Low hours This machine can be inspected under power in our Warehouse Mimu Machine Tools (Italy)

Condition: used, Chiron FZ18W Magnum rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm Gedpfehkkwbox Anxsit 20 tools ISO 40 / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor 6 ton 3,6 x 2,25 x 2,85 machine can be inspected under power in our warehouse Mimu Machine Tools (Italy)

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Gijdpfxsgqg Sgj Anxet Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ...

Condition: used, Vertical machining center CHIRON FZ08W 2 pallets 12 HSK32 tools Spindle 15000 rpm HSK-32 rotopallet (2 pallets) CNC Fanuc 21iM chip conveyor The machine is under power in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy CNC type: Fanuc 21iM 2 pallets: Yes Number of pallets: 2 Giedpfx Ajlaga Ejnxot Spindle speed RPM: 15000