Used Chocolate Molding Machine for sale (65,426)

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 9,64,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Hfodpjzqbk Nofx Aflok

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 General description Modern injection molding machine equipped with a fully hydraulic clamping unit. The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Hfjdpfozrgfhsx Aflok Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Version with wear-resistant (abrasion-resistant) protection Check valve Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Main motor power: 160 kW Installed heater power: 93 kW Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, screw diameter: 32 mm, This Dr Boy injection moulding machine is currently in storage at Plastima Used Machinery. The machine is from 2007 and has relatively few operating hours for its age. Hfodszuk E Depfx Aflsk - Brand: Dr Boy - Model: 55M - Year of manufacture: 2007 - Screw diameter: 32 mm - Shot volume: 96.5 cm³ - Clamping force: 55T - Operating hours: 24,210

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Hfsdey Iwlajpfx Aflok Inspection under power possible at any time! Technical specifications as per the pictures! Machine is immediately available!

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42.503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 4,000 kN Platen size: 1,300 × 1,080 mm Minimum tool height: 350 mm Maximum opening stroke: 1,300 mm Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Electro-hydraulic system Rated power of pump motor: 45 kW Hedszncmtspfx Aflsfk Dimensions & Weight Dimensions (L × W × H): approx. 8,000 × 2,250 × 2,200 mm Weight: approx. 5,600 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Hfjdjzncmaepfx Aflsk Maximum opening width: 1,800 mm Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of pump motor: 55 kW Heating capacity: 62 kW DIMENSIONS & WEIGHT Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Technical data: Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 cc Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Max. distance between mounting platens: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight: Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values: Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Condition The machine is generally functional but requires repair or maintenance. An inspection of the machine is strongly recommended. Further information on the condition can be provided upon request. Sale Location: [Insert location] Inspection possible by appointment Sale from the location Please contact us for further information, images, or to arrange an inspection. Hfjdpezrngysfx Aflek

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM300-1900CX Baujahr: 2011 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Max. Hubvolumen: 769 cm³ Spritzteilgewicht: 692 g/PS Steuerung: MC5 Ausstattung: 3 St. Kernzug Hfjdpfx Afjx Tbfuslok Djbr Rvoxyrc Isf Nysu Roboter Hersteller: WITTMANN 45- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 51.000 Betriebsstunden

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Hsdsyhbt Hepfx Aflofk Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 244136, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 720 mm, displacement volume: 570 cm³, injection pressure: 2,000 bar, injection weight: 521 g, mold height (min.): 300 mm, total length: 7,460 mm, total width: 1,848 mm, total height: 2,267 mm, overall weight: 20,000 kg, For sale is an injection molding machine from the manufacturer Arburg, type 720 H 3200 - 1300, from 2018. The machine is in very good condition. Clamping force: max. 3,200 kN Mold opening force: max. 110 kN Opening stroke: max. 600 mm Mold height (variable): 300 mm to 800 mm Platen distance (variable): max. 900 mm to 1,400 mm Distance between tie bars (H x V): 720 mm × 720 mm Size of the mounting platens (H x V): 1,040 mm × 1,040 mm Max. weight of the moving mold half: 2,900 kg Ejector force | Stroke: max. 86 kN | 250 mm Screw diameter: 55 mm Effective screw length (L/D): 22 Maximum screw stroke: 240 mm Calculated stroke volume: 570 cm³ Maximum shot weight (in polystyrene/PS): 521 g Maximum injection pressure (holding pressure): 2,000 bar Hjdpfx Aezl Tc Tofljfk Maximum material throughput (PS): 86 kg/h Maximum injection flow rate: 713 cm³/s Specific injection pressure (max.): 2,000 bar Nozzle closing force | Stroke (max.): 90 kN | 550 mm Heating power / Heating zones: 22.9 kW | 8 zones 3. Connection values & machine weights Net weight of the machine (without oil): 18,550 kg Oil capacity (hydraulics): 410 liters Cooling water connection: max. 30 °C | min. 1.5 bar differential pressure (Δp) | Nominal size DN 25 Drive power (pump motor): max. 60 kW Total connection power (electrical at 400V/50Hz): 84 kW Max. current / Fuse rating: Machine total: 125 A Heater: 40 A Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Beschreibung: 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2001 Schließkraft: 200 Tonnen Holmabstand Holmlos Einbauhöhe min.: 550 mm Öffnungsweg: 700 mm Hfjdpfx Aszl T Snsflek Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC200 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E -4 Stück Kernzüge -Drehtischsteuerung

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM500-4300CX Baujahr: 2010 Schließkraft: 500 Tonnen Holmabstand 900 x 900 mm Schnecken DN: 90 mm Max. Hubvolumen: 2.290 cm³ Spritzteilgewicht: 1.777 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Schnittstelle Roboter Hsdpfx Afozl Svroljfk 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: good (used), Year of construction: 2006, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM420-1900C2 Baujahr: 2006 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Hsdpezl Sfmefx Aflofk Schnecken DN: 70 mm Max. Hubvolumen: 1.047 cm³ Spritzteilgewicht: 853 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Roboter SEPRO, Typ: SR4030 S3 VISUAL, Baujahr: 2006 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: excellent (used), Year of construction: 2015, KRAUSS MAFFEI KM 1300-12000 MX injection molding machine Year of manufacture: 2015 Equipment: Krauss Maffei LRX 350 linear robot Clamping unit Clamping force: 13,000 kN (1300 tons) Hydraulic-mechanical two-platen clamping system 4 pressure pads 4 adjustment units on the moving platen Fully hydraulic clamping system Technical data Mounting plate dimensions: 2210 × 1910 mm Distance between columns: 1570 × 1270 mm Mold opening stroke: 2350 mm Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Hfsdpfx Ajzqdibjflsk Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection unit Complete plasticizing unit for thermoplastics, designed in an abrasion-resistant version. Technical data Screw diameter: 105 mm Injection pressure: 2296 bar Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plasticizing rate (PS): 130 g/s Control system The machine is equipped with a modern Krauss Maffei MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Equipment includes: 19-inch color touchscreen ProcessDesigner process visualization Full machine diagnostics Advanced process parameter setting functions PV injection unit adjustment Electrical and hydraulic equipment Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Oil tank capacity: 2440 liters Dimensions and weight Length: 13.65 m Width: 3.65 m Height: 2.82 m Machine weight: 70 tons KRAUSS MAFFEI LRX 350 linear robot The machine is equipped with a Krauss Maffei LRX 350 linear robot, designed for automatic part removal. Robot parameters Payload: up to 35 kg Part removal on the side opposite the operator Range of motion X-axis (removal from the mold) 1200 mm servo drive Y-axis (vertical) 1000 / 1000 mm (telescopic) servo drive Z-axis (transverse) 3500 mm servo drive C-axis rotation 0–90° pneumatic drive torque 60 Nm In addition: absolute positioning measurement system.

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Hfjdpjzqdagjfx Aflok Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 3,188 kN, injection weight: 6,935 g, screw conveyor diameter: 130 mm, production capacity: 17,000 unit/h, TECHNICAL DETAILS Clamping force: 320 t Shot weight: 6,935 g Screw diameter: 130 mm Output: 17,000 preforms/h MACHINE DETAILS Configuration: 72-cavity, 4-stage EQUIPMENT Take-out system Conveyor belt, capacity: 1825 lt/h TPS robot, model: TRT-M4-72-E One of the following mold options can be selected: Option 1: MHT mold, 72-cavity, for 30.8 g PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5-liter bottles) Option 2: 72-cavity core sets for 27.8 g PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0-liter bottles) Hfedezmxdlspfx Aflek Note: In addition to the machine, only a dryer and a cooling system are required to start production.

Condition: excellent (used), Year of construction: 2023, operating hours: 4,050 h, functionality: fully functional, machine/vehicle number: AEFM6009, clamping force: 10,000 kN, screw diameter: 110 mm, clearance between the columns: 1,100 mm, column diameter: 180 mm, displacement volume: 4,941 cm³, injection pressure: 1,840 bar, injection weight: 4,546 g, mold height (min.): 450 mm, ejector force: 2,89,000 N, ejector stroke: 350 mm, opening stroke: 1,200 mm, plate length: 2,350 mm, plate width: 1,570 mm, plate height: 1,570 mm, total length: 11,300 mm, total width: 2,550 mm, total height: 3,400 mm, overall weight: 44,000 kg, heating capacity: 51 kW (69.34 HP), pressure: 178 bar, number of injections: 1, pump power: 1,36,000 W, power: 195 kW (265.13 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 371 A, Equipment: documentation/manual, The machine has relatively few operating hours and is in very good condition. It has been well-maintained. The machine processes only ABS, PP, and PS. It is controlled by a Beckhoff system. The machine is equipped with extensive additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 24 tool heating zones, a water manifold with 6 zones, a screw heater insulation, hydraulic screw rotation for die replacement, a die with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. In addition, water blocks are fitted to both the moving and stationary tables, each with 8 outlets. Furthermore, a number of spare parts are included with the machine, such as a complete die, a screw die, heaters, temperature sensors, and various seals for the hydraulics, as well as a self-filtration filter, a die wrench, and auxiliary ejector rods. The machine is being sold without the robot shown in the pictures. Hsdpfjznll Sex Aflofk

Condition: excellent (used), Year of construction: 2021, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: ADFL9004, clamping force: 80,000 kN, screw diameter: 98 mm, clearance between the columns: 1,020 mm, column diameter: 160 mm, displacement volume: 3,142 cm³, injection pressure: 1,794 bar, injection weight: 2,890 g, mold height (min.): 400 mm, ejector force: 1,82,000 N, ejector stroke: 280 mm, opening stroke: 1,000 mm, plate length: 2,020 mm, plate width: 1,440 mm, plate height: 1,440 mm, total length: 11,200 mm, total width: 2,400 mm, total height: 3,300 mm, overall weight: 35,000 kg, heating capacity: 39 kW (53.03 HP), pressure: 178 bar, number of injections: 1, pump power: 1,16,000 W, power: 163 kW (221.62 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 312 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition. It has been well maintained. The machine processes only ABS, PP, and PS. The machine is controlled by a Beckhoff system. The machine is equipped with a variety of additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 8 tool heating zones, a water manifold with 8 zones, a screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Water blocks are also included for both the moving and stationary tables, each with 8 connections. In addition, a number of spare parts are included, such as a complete torpedo, a screw, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter, a torpedo wrench, and auxiliary ejector rods. The machine is sold without the robot shown in the pictures. Hfjdoznlhmopfx Aflok

Condition: excellent (used), Two ARBURG ALLROUNDER 270 S injection molding machines from a cleanroom production environment. Hfedpfx Aezrvhlefljk In excellent condition! Price for both machines: only €16,000.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, screw diameter: 65 mm, total width: 2,100 mm, total height: 9 mm, We offer a high-performance film blowing machine from Kang Chiau, model Kmt 2x 65, manufactured in 2008, in very good condition. It is offered at a very attractive price and is ready for operation, well-maintained. Manufacturer: Kang Chiau Model: Kmt 65 Year of manufacture: 2008 Condition: very good Two 65 bi-metallic screws, one screw is new, the other screw with sleeve after regeneration Width: 2100, two back-to-back draw rollers Machine height: 9m Hsdpfjzpxxnjx Aflsfk Rotating die: 450mm Cartridge filter Tension sensor and automatic film cut-off Installation and commissioning at the customer's site are possible (costs to be agreed upon). If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, Year of construction: 2015, Lot consists of: (1) Injection molding machine, Handling: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling system 1x Conveyor belt Technical Details: Max. stroke (mm): 175.0 Measuring system: Incremental encoder Clamping system: Toggle (KH) Clamp force (kN): 1000 Injection servo: No Screw diameter (mm): 40.0 Screw speed (rpm): 420 Heating zones: 4 Heating power zone 1 (kW): 4.23 Heating power zone 2 (kW): 3.00 Hfodpsy N R N Uefx Aflok Heating power zone 3 (kW): 3.00 Heating power zone 4 (kW): 3.00 Temperature control: J-type thermocouple Pressure sensor type: Diaphragm

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Wittmann | W621 | 2003 Temperature control: HB Therm | HB-100 Z1 | 2013 Miscellaneous: 1x Protective Enclosure 1x Conveyor belt 1x Hot Runner Controller, Mold Masters 1x Conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 189 Current 2 (A): 152 Current 3 (A): 37 Weight (t): 10.1 Pressure (bar): 190 Flow rate (l/min): 206 Hedpfx Afey N R Iqeljfk

Condition: used, Year of construction: 2017, Lot consists of: (1) Injection molding machine, Handling: Wittmann | W842PRO-0111 | 2017 Temperature control: HB Therm | HB-100 Z1 | 2017 Hsdpfsy N R I Dsx Aflsfk Dryer: Somos | RDM 100 | 2021 Miscellaneous: 1x Conveyor Belt Technical Details: Power supply voltage (V): 400 Frequency (Hz): 50 Weight (t): 26.8

Condition: used, Year of construction: 2015, (1) Injection molding machine, Handling: Wittmann | W833-0747 | 2014 Temperature control: HB Therm | Dryer: Somos | RDX27 | 2015 Miscellaneous: 1x Protective Enclosure 1x Auxiliary Unit, by Ferromatik Milacron 1x Automation, by Wittmann + Conveyor Belts, by Frasch Technical Details: Power supply voltage (V): 400 Frequency (Hz): 50 Approx. weight (t): 10.1 + 0.6 Hfsdey N R Tmjpfx Afljk

Condition: used, Year of construction: 2000, (1) Injection Moulding Machine, Handling: Wittmann | WX142-0325 | 2023 Miscellaneous: 1x protective enclosure 1x handling system, Wittmann Series 9 1x conveyor belt incl. box-changing function 1x V2A reject chute 1x Euromap 12/67 conversion 1x external hot runner unit, Mold Masters M1-06-12 (year of manufacture 2016), 12 zones 1x conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 196 Current 2 (A): 110 Current 3 (A): 86 Current 4 (A): 67 Weight (t): 9.7 Hodpfx Afey N R Uqjlefk Pressure (bar): 190 Flow rate (l/min): 190