Used Chop Cutters for sale (2,905)

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: Groschopp, geared motor Iedpfxjrmt U Ao Aabobc -Gearbox: Type E 2 ai= 7 -Speed speed: approx. 400 rpm -Motor: Type WK 0341501 0.12 kW / 2800 rpm -Shaft: Ø 10 x 30 mm -Protection rating: IP44 -Total dimensions: 225/150/H115 mm -Weight: 4.4 kg

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: Groschopp, geared motor Ijdsrh Nihepfx Aabobc -Gearbox: Type Z 20 i= 25 -Speed: approx. 112 rpm -Motor: Type WK 0341501 DM 90-60 0.12 kW / 2800 rpm -Shaft: Ø 14 x 27 mm -Protection rating: IP54 -Total dimensions: 270/200/H115 mm -Weight: 5.2 kg

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19985 Description: Isdpfx Asv U Shkjabobc 120 liter Kramer & Grebe chopper. New engine, axle, bearings and overhauled belts. 230 Volt cabinet included. Can be delivered at short notice.

Condition: ready for operation (used), Year of construction: 2005, Bobst SP 104 ER Die-cutter Diecutter with stripping and blanking station Technical specifications: Paper min. 90 g/m2 Ijdswgz H Eepfx Aabobc Cardboard max. 2000 g/m2 Corrugated board max. 4 mm Min. sheet size: lxw 350 x 400 mm Max. sheet size: lxw 740 x 1040 mm Max. dimensions of cutting die: Max. lxw 725 x 1040 mm Cutting force: 250 tons Running speed: max. 8.000 s/h. Centerline for job quick-change Adjustable centering at the stripping and at the delivery, Bobst-Electronic machine operationg system C.U.B.E. : (Control Unit Bobst Electronic) Non Stop Feeder, Steel plate, Double Sheet Sensor, Left hand pull lay, Right hand pull lay, Micrometic adjustment, Centerline, Double Action Stripper, Blanking Station, Quick lock stripping frame,

Condition: new, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 0-256-25-0756, total width: 1,850 mm, total height: 2,290 mm, total length: 2,390 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 4,000 kg, grinding height: 200 mm, working height: 200 mm, power: 33 kW (44.87 HP), grinding belt speed: 1,600 mm/s, conveyor belt speed: 1,500 mm/s, grinding belt length: 2,150 mm, workpiece height (max.): 200 mm, pass-through height: 200 mm, Homag SWT 225 CH OPTIMAT, wide belt sander, new, opportunity! Ibedpfx Ajxlgfzjabsc

Condition: used, Empty weight: 200 kg Occ sneeuwschop 325 cm Article nr.: W351999006-veiling Used snow shovel 325 cm Iodpfx Aexh E Nqeabsbc

Condition: good (used), functionality: fully functional, Sami Autochopper 185 TEC 440 Firewood Processor Ijdpfx Asxiytyjabebc In good condition Operates automatically Electric drive Max diameter: 44 cm Logs: 20–50 cm Splitting force: 18.5 t Splitting wedge: 2/8

Condition: refurbished (used), Year of construction: 2009, Screen Printing Machine ADCO Squeegee Cutter SC061 (2009). Ibodpfxsxk T Hps Aabec Sartech is a company specializing in solutions for screen printing, automation, and robotics, as well as the manufacture of UV (electronic) or hot air tunnels.

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Ibjdpfx Aaeuzv Tzobec Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: excellent (used), Year of construction: 2015, Tipper Tie TTChop 20 Cutter Based on more than 130 years of experience in design and a keen sense of innovation, the TTChop cutter generation TIPPER TIE sets new standards in grinding technology. TTChop20 combines functionality and advanced technology. This is an extremely versatile and yet specialized machine for each individual application. The production of raw coarse or fine sausages, tender boiled sausages or emulsions brings the same remarkable results as gentle mixing and dipping of a wide variety of components. Comes with a lot of extra knifesets. Manufacturer: Tipper Tie Model: TTChop 20 Ibsdpov Eamcsfx Aaboc Year: 2015 Production Hours: 9.338 hours Capacity: 200 liter Max. load elevator: 250 kg. Power: 400V / 50Hz / 98kW Machine Dimensions LxWxH: 3.250x2.600x2.200 mm Machine Weight: 4.100 kg.

Condition: ready for operation (used), Stichweh double scoop wheel Isdpfxort R I Ej Aabjbc Type DS 3011/09 Bl95 Year 2002 Drive 11 kW weight 21,400 kg Wheel diameter 3000mm Wheel width 1100mm and 900mm Trough length approx. 8m Capacity up to 80 t/h sand Water volume up to 250 m3/h Gearbox recently renewed; an overhauled replacement gearbox is included Replacement dewatering screen linings Good operational condition

Condition: used, Empty weight: 1.000 kg Ibsdpexh Du Sjfx Aabjc Article nr.: W351999002-veiling Used Snow plug 3m

Condition: used, Year of construction: 2013, SCHNELL Optibat 100/3/12 Cutting Bench This cutting bench features 3 tracks. Length of 12 meters. It can cut materials up to 40 mm in thickness. Manufactured in 2001, it was revised in 2013. Number of tracks: 3 Length: 12 m Ijdovtp Uxjpfx Aabebc Materiel Thickness: Cut up to 40 mm

Condition: used, Empty weight: 500 kg Iodpoxh Dkyjfx Aabebc Occ sneeuwschop breedte : 3000 mm hoogte : 850 mm Article nr.: W351999008-veiling Used snow shovel

Condition: used, Empty weight: 200 kg Ijdpfx Aasxhzk Dsbobc Occ sneeuwschop 325 cm Article nr.: W351999007-veiling Used snow shovel 325 cm

Condition: used, Empty weight: 200 kg Occ sneeuwschop 335cm Ibedpexhzkdefx Aaboc Article nr.: W351999004-veiling Used snow shovel 335cm

Condition: used, Empty weight: 200 kg Occ sneeuwschop 325 cm Isdpfx Ajxhy Afjabsbc Article nr.: W351999005-veiling Used snow shovel 325 cm

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Ibsdpfx Aexnlgpjabjc Storage location: Supplier

Condition: used, Straw chopper Ibjdoxm S Tajpfx Aabjc Length: 2.35 m Width: 1.90 m Power: 37 kW

Condition: like new (used), Year of construction: 2024, operating hours: 370 h, functionality: fully functional, machine/vehicle number: 122, total length: 9,900 mm, total width: 2,450 mm, total height: 4,000 mm, overall weight: 21,000 kg, rotor diameter: 680 mm, rotational speed (max.): 42 rpm, power: 235.36 kW (320.00 HP), Equipment: rotational speed infinitely variable, Demo machine Arjes ekomaxx 800 Iodpfx Aaevzribjbobc Perfect shredder for green waste, waste, waste wood, plastic etc.

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: MBUT1-9, Cable shredder Pre-shredder Chip crusher Shredder Two-shaft shredder Rotor shear Rotor knife Chip shredder 5 pieces available! Manufacturer TBE Habermehl TYPE ZH400, BJ 2003 Power 400V 3KW with pumping station, without control Iodjikm Nrjpfx Aabobc The shredder can also be operated separately from the chip conveyor Dimensions complete LxWxH 200x85x120cm (motor), 110x55x31cm LxWxH (shredder), Opening about 45x40cm Ideal for pre-shredding cables with plugs, plastic, metal, wood etc. Warning - not a toy. The shredder eats almost everything. Very robust engine and transmission Used condition, function flawlessly until dismantling Collection only by appointment in 75053 Gondelsheim Shipping by forwarding agency possible, please inquire with zip code

Condition: used, Year of construction: 2025, operating hours: 246 h, CLAAS Jaguar 940 Ijdpfx Aajwfivrjbjbc Demonstration Machine 2025 Equipment: Best Brand - Driver's Package: Comfort cab with A/C MATIC (automatic air conditioning and heating) Electric and heated rearview mirrors LED maintenance and access lighting DAB+ radio Premium LED work lighting Cooling unit for storage box L Sun blinds, smartphone holder, and compressed air in the cab Leather comfort seat, air-suspended PREMIUM LINE Longlife (6,000 operating hours or 10 years) PREMIUM LINE advanced package - Crop flow L and carbide counterblade Assistant package: DYNAMIC POWER Camera system, ready AUTO Fill wagon filling system V-FLEX 28 chopping unit, including corn knife MULTI CROP CRACKER MAX 120/130 teeth with Busa CLAD coating Silage additive system with tank (375 l) and ACTISILER 37 Electro-hydraulic accelerator gap adjustment Drive axle with differential lock Front tires 710/75 R34 Front tire pressure control system Mercedes Benz R6-cylinder OM471 LA (390 kW/530 hp) Compressed air horn Rear camera with CEBIS display PROFI CAM QUANTIMETER yield measurement Steering angle sensor STOP ROCK stone detector CAM PILOT steering pilot Dynamic steering Compressed air brake PickUp 300 Profi Contour | Internal No.: 11277163

Condition: used, Year of construction: 2025, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Ibedoxnlbtjpfx Aabec

Condition: used, Year of construction: 2023, only 466 operating hours incl. cross screw discharge incl. automatic magnetic separator Drive power: 18.5 kW Throughput: 350 - 600 kg/h Hopper: 990 x 990 mm Screen: 24 mm Blades: 27 pcs. Shredder dimensions: 1050 x 1500 x 1710 mm Shredder weight: approx. 1700 kg Storage location: customer Ijdpfew Sy Ttex Aabjbc

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Isdpfx Aovvi Anoabsbc Storage location: Supplier