Used Circular Saw Simec for sale (6,763)

Condition: as good as new (ex-display), Year of construction: 2016, saw blade diameter: 400 mm, - Semi-automatic - Saw blade 400 mm - Double miter - 4 pneumatic clamps - Mist lubrication system - Blow gun Nsdpoqy A Rkjfx Aanolk - Protective cap - documentation - 400V

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4200 € 315 mm 315x32x63 mm 45 / 90 U/Min 45 ° 45 ° rund 105 mm / quadratisch rund 90 mm / quadratisch rund 90 mm / quadratisch 1,3 / 1,8 kW 600 mm 1000 mm 1400 mm 200 kg Nlsdpfx Aswmzfzoanek Manual vice Robust double joint pivot Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split vice (clamps before and after the sawblade) Sawblade not included

Condition: excellent (used), Year of construction: 2015, Saw blade Ø: 350 mm Nsdpfxexlg Icj Aanjlk for pipes 90/45°: 120/110 mm for square tube 90/45°: 105/95 mm for profiles 45°: 105x105/80 or 110 x 80 mm for round material at 90/45°: 60/50 mm 2 saw blade speeds: 1400/2800 rpm Space requirement with original stand: 1050 x 600 x 1450 mm Weight: 162 kg

Condition: excellent (used), PERTICI UNIVER 50 SEMI-AUTOMATIC MITRE SAW Nljdpsxp Rx Tofx Aanek This machine is primarily designed for cutting aluminium and PVC profiles. Both mechanical and electrical safety features of the guards have been given special attention. During upward cutting, the operator is protected by the top cover as well as by the machined profile. The cutting angle can be manually set from 0 to 67.5 degrees, both left and right, by rotating the turntable. Seven fixed stops (67.5 - 60 - 45 - 0 - 45 - 60 - 67.5) enable cutting without adjustment. Other positions are set using a graduated rule. Motor: 5.5 HP Three-phase supply Blade diameter: 500 mm Cutting capacity at 90°: diameter 178 mm or 160 x 160 mm 1 carbide blade, diameter 500 mm 2 vertical pneumatic clamps 2 horizontal pneumatic clamps Blade lubrication.

Condition: excellent (used), Double mitre saw OMS INVINCIBLE OK 330 Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Nedpfx Aow U Smweanslk Heads adjustable at 45/-45° angles Motor power: 2×2.2 kW Saw blades: 330 mm Pneumatic vertical and horizontal material clamping

Condition: used, Year of construction: 2006, functionality: fully functional, cutting width (max.): 1,270 mm, power: 75 kW (101.97 HP), sliding table length: 3,800 mm, CIRCULAR SAW SCM MOD. SI450 N - Carriage mm. 3800 - Cutting width 1270 mm on parallel fence Njdpfxsmzbm Rj Aanolk - Motor 7.5kw - Year 2006 (CE)

Condition: used, GRAULE AGT pull and table circular saw Nlsdpfexf Tr Uex Aanjk

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4500 € 315 mm 315x32x63 mm 45 / 90 U/Min rund 105 mm / quadratisch rund 90 mm / quadratisch 1,3 / 1,8 kW 600 mm 1000 mm 1400 mm 200 kg Pneumatic vice Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split visc (clamps before and after the sawblade) Njdpfxewmzfuj Aanolk Self-centering visc for optimal cutting position Large base frame for high stability Sawblade not included

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm Nlsdpjtv Rgrofx Aanjk dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: used, Miter left 60° + right 45° Hydropneumatic control of the saw unit Electropneumatic material feed unit Nlsdpfxjxfr Nlj Aanok Smooth-running, high-performance worm drive with a large gear ratio, integrated into a robust cast housing for optimal cutting results Clamping fixture with double clamping arm for burr-minimized cuts, additionally featuring a lateral quick-shift for miter changes Precision prism guide for the gearbox head, laterally adjustable Especially stable base frame with integrated automatic cooling and large chip drawer CNC control: By entering various parameters such as quantity and material length, the CNC version is the ideal solution to optimize workflows.

Condition: new, Year of construction: 2024, Circular saws. • For cutting wood with nail residue Nlodpjh Uubdjfx Aanek • Available in various diameters. For more information call us.

Condition: new, Year of construction: 2024, saw blade diameter: 285 mm, cutting height (max.): 75 mm, warranty duration: 12 months, Capacity / Capacitiy Ø10mm - Ø75mm Saw Body / Saw Body 30 Degree Angle Linear Slide 30 Degree Angle Linear Slide Saw Engine Power / Saw Engine Power 11 KW Hydraulic Pump Engine Power / Hydraulic Pump Engine Power 3 KW Saw Feeding Servo / Saw Feeding Servo 1.5 KW SIEMENS Material Feeding Servo / Material Feeding Servo 1.5 KW SIEMENS Saw Speed / Saw Speed 70-160 (r./min.) / (RPM / Min) Saw Blade Dimensions Ø285x2,0x1,7x32mm Saw Cutting Feed / Saw Cutting Feed Servo Motor With Brake and Screw Spindle Movement Servo Motor With Brake, Screw Spindle Movement Part Feed System / Part Feed System Servo Motor and Screw Spindle Movement Servo Motor Screw Spindle Movement Automatic Part Feed Length / Auto Part Feed Length Single Feed 10-1000mm / Single Feed Part Length to be Auto Cut / Part Length to be Auto Cut 7000mm (Max) 1500mm (Min) Chip Conveyor / Chip Conveyor Palletized / Pallets Cooling System / Cooling System Pulverized Cutting Oil / Pulverized Cutting Oil Machine Weight / Machine Weight 3.500KG Bench Dimensions / Bench Size (Machine Capacity) 2595mm x 6781mm (with Loading Table and Chip Conveyor) Lubrication / Lubrication Automatic and Manual / Auto and Manual Control System / Control System Siemens PLC, Screen, Servo and Drivers, Touch Color Screen / Siemens PLC Screen, Servo and Drivers, Touch Color Screen Nsdpovbzp Rjfx Aanjlk Hydraulic System / Hydraulic System Rexroth Valves, Cooled Hydraulic Unit / Rexroth Valve, Cooled Hydraulic Unit

Condition: good (used), Year of construction: 2003, saw blade diameter: 450 mm, Nice under-table crosscut saw with two-hand operation and foot switch. Saw blade diameter 450 mm, max. cutting height 16 cm, with 2 roller conveyors. Nsdpfx Aewx R Ivjanslk

Condition: new, Year of construction: 2025, neu 2025 060103 prompt, Zwischenverkauf v Türkei 7500 € 121.59 € Nsdpfewmf Uaex Aanslk 1 6300 € 350 mm 350x32x63 mm 45 / 80 U/Min 45 ° 45 ° rund 115 mm / quadratisch rund 110 mm / quadratisch rund 110 mm / quadratisch 1,8 / 2,2 kW 1100 mm 1000 mm 1400 mm 300 kg Semi-automatic circular saw designed High production rates, ideal for small and mid production Heavy duty gearbox Cast iron structure Foot switch actuation Hydro-pneumatic operation of saw head smoothes descent for optimum cut Pneumatic vice 2 cutting speeds Adjustable head stroke according to the dimensions of the material which has to be cut Piece counter 45° right to 45° left cutting saw blade not included OPTION: saw blade Dm. 350 mm € 180,00

Condition: used, Rip saw - Saw for lengthening boards. - Manufacturer: omega T55 300 - Year: 1996 Nlodpfx Aajtq Eblenok - Electric motor - Frequency counter

Condition: used, Year of construction: 2006, machine/vehicle number: KK1/023307, SECOND-HAND CIRCULAR SAW TECNOMAX TYPE S315 WS - CE RULES - Volt. 400/50 - S/N KK1/023307 Nljdpfx Aewr Ngweansk - Year 2006

Condition: used, Year of construction: 1982, From business liquidation: Ulmia 1710S Year of manufacture: 1982 Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Saw blade: 250mm Table size: 630x500mm 380 Volt Cutting width to the right of the saw blade: 650mm Nlsdpfx Aaexq N T Eonek The machine is operational, but shows heavy signs of use!

Condition: new, Year of construction: 2024, saw blade diameter: 360 mm, cutting height (max.): 100 mm, warranty duration: 12 months, Capacity / Capacitiy Ø20mm - Ø100mm Saw Body / Saw Body 30 Degree Angle Linear Slide 30 Degree Angle Linear Slide Saw Engine Power / Saw Engine Power 15 KW Hydraulic Pump Engine Power / Hydraulic Pump Engine Power 3 KW Saw Feeding Servo / Saw Feeding Servo 1.5 KW SIEMENS Material Feeding Servo / Material Feeding Servo 1.5 KW SIEMENS Saw Speed / Saw Speed 30-130 (r./min.) / (RPM / Min) Saw Blade Dimensions Ø360x2,25x2,7x40mm Saw Cutting Feed / Saw Cutting Feed Servo Motor With Brake and Screw Spindle Movement Servo Motor With Brake, Screw Spindle Movement Part Feed System / Part Feed System Servo Motor and Screw Spindle Movement Servo Motor Screw Spindle Movement Nlodpfx Aaovbzrxsnok Auto Part Feed Length / Auto Part Feed Length Single Feed 10-580mm / Single Feed Part Length to be Auto Cut / Part Length to be Auto Cut 7000mm (Max) 1000mm (Min) Chip Conveyor / Chip Conveyor Palletized / Pallets Cooling System / Cooling System Pulverized Cutting Oil / Pulverized Cutting Oil Machine Weight / Machine Weight 5000KG Bench Dimensions / Bench Size (Machine Capacity) 3368mm x 6624mm (with Loading Table and Chip Conveyor) Lubrication / Lubrication Automatic and Manual / Auto and Manual Control System / Control System Siemens PLC, Screen, Servo and Drivers, Touch Color Screen / Siemens PLC Screen, Servo and Drivers, Touch Color Screen Hydraulic System / Hydraulic System Rexroth Valves, Cooled Hydr

Condition: good (used), functionality: fully functional, cutting width (max.): 1,200 mm, cutting height (max.): 70 mm, saw blade diameter: 125 mm, total height: 1,300 mm, total length: 6,000 mm, cutting height with scoring (max.): 2 mm, extraction nozzle diameter: 250 mm, type of input current: three-phase, input voltage: 400 V, space requirement width: 3,000 mm, space requirement length: 6,500 mm, input frequency: 50 Hz, main saw diameter: 350 mm, overall weight: 3,500 kg, rotational speed (max.): 3,800 rpm, cutting length (max.): 4,200 mm, feed length X-axis: 4,500 mm, feed rate X-axis: 7 m/min, collet bore: 75 mm, saw blade speed: 3,800 rpm, saw drive: 7,500 W, year of last overhaul: 2024, Saw for rip cutting but also for sawing. It is very well suited for longitudinal edging of lumber flanks and then cutting to width before planing. With this machine, sawing lumber is incomparably lighter than on classic saws even with a carriage. It can work in automatic and semi-automatic cycle . It has 4 ranges of aggregate position as far as the length of the element is concerned, which means that the aggregate does not have to return all the way to the end of the machine, which shortens the time of cutting the raw material. It significantly facilitates and accelerates the manipulation of Nodpeuyvniefx Aanelk with the preparation of lumber for planing, and the even cut makes the alignment saves time on planing the element. Working on it is relatively safe because during the cutting itself, the operator does not have direct contact with the material being cut, and the workpiece is pressed from above with a pressure beam using compressed air. Activation of the pressure beam and the feed of the cutting unit, is carried out using a foot pedal .It is also suitable for cutting boards with a jigsaw .Also equipped with components for various applications. It is ideal for small and medium-sized carpentry shops that process thick massive lumber. The machine is massive and durable.

Condition: new, Year of construction: 2025, saw blade diameter 370 x 3,0 x 40 mm cutting diameter 120 mm stroke -- mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 180 x 100 mm capacity 45 degrees: round li. 120 / re. 105 mm capacity 45 degrees: square li. 100 / re. 100 mm capacity 45 degrees: flat li. 130x100 / re . 130x10 mm capacity 60 degrees: round 110 mm capacity 60 degrees: square 90 mm capacity 60 degrees: flat 90 x 100 mm total power requirement 1,8 / 2,2 kW weight of the machine ca. 392 kg Nsdpfxjvuz Rnj Aanjlk dimensions of the machine ca. 700 x 900 x 1800 mm Description: - Mitre left 60° + right 45° - Clamping block with double clamping arm - Robust prism guide for the saw head (adjustable dovetail guide) - Chip brush - Automatic cooling - Metal handle for high clamping force - Solid, strong cast iron table

Condition: used, Circular saw Manufacturer: Korvet Log diameter from 150-800mm Nlsdpfxowainqe Aanek

Condition: new, Year of construction: 2024, saw blade diameter: 460 mm, cutting height (max.): 160 mm, warranty duration: 12 months, Capacity / Capacitiy Ø30mm - Ø160mm Saw Body / Saw Body 30 Degree Angle Linear Slide 30 Degree Angle Linear Slide Nedpfx Aaevbzt Aenjlk Saw Engine Power / Saw Engine Power 15 KW Hydraulic Pump Engine Power / Hydraulic Pump Engine Power 3 KW Saw Feeding Servo / Saw Feeding Servo 1.5 KW SIEMENS Material Feeding Servo / Material Feeding Servo 1.5 KW SIEMENS Saw Speed / Saw Speed 30-120 (r./min.) / (RPM / Min) Saw Blade Dimensions / Saw Blade Dimensions Ø460-Ø480x2,25x2,7x50mm Saw Cutting Feed / Saw Cutting Feed Servo Motor With Brake and Screw Spindle Movement Servo Motor With Brake, Screw Spindle Movement Part Feed System / Part Feed System Servo Motor and Screw Spindle Movement Servo Motor Screw Spindle Movement Automatic Part Feed Length / Auto Part Feed Length Single Feed 10-850mm / Single Feed Part Length to be Auto Cut / Part Length to be Auto Cut 7000mm (Max) 1600mm (Min) Chip Conveyor / Chip Conveyor Palletized / Pallets Cooling System / Cooling System Pulverized Cutting Oil / Pulverized Cutting Oil Machine Weight / Machine Weight 5550KG Bench Dimensions / Bench Size (Machine Capacity) 3403mm x 7027mm (with Loading Table and Chip Conveyor) Lubrication / Lubrication Automatic and Manual / Auto and Manual Control System / Control System Siemens PLC, Screen, Servo and Drivers, Touch Color Screen / Siemens PLC Screen, Servo and Drivers, Touch Color Screen Hydraulic System / Hydraulic System Rexroth Valves, Cooled Hydraulic Unit / Rexroth Valve, Cooled Hydraulic Unit

Condition: new, saw blade diameter 315 mm cutting diameter 90 mm stroke -- mm mitre joint cuts -/+ degrees -45 + 45 Grad turning speeds 40 / 80 U/min weight of the machine ca. 165 kg dimensions of the machine ca. 1,0 x 1,15 x 1,48 m Manual metal circular saw MKS 315 N Action set / Item no. 3620303SET - two cutting speeds - Rotatable machine head 45° to the left and 45° to the right - Reduction gear, running quietly in an oil bath - automatic diaphragm coolant pump with coolant filter - Vice with counter vice, quick release and anti-burr jaws guarantees a precise and burr-free cut - Lateral material support arm with roller - Vice swivels 45° to the left and 45° to the right - Movable guard ensures optimal safety when cutting - Control handle with safety switch - Vice with counter vice, quick release and anti-burr jaws - Lateral material support arm with roller - Vise can be moved longitudinally and thus for longitudinal cuts and for suitable for slots 0° (round) solid material 55 mm 0° (round) tube 90 mm 0° (square) tube 80 x 80 mm 0° (rectangular) tube 115 x 70 mm -45° (round) solid material 50 mm Nlodpfx Ajibw Smsanek -45° (round) tube 80 mm -45° (square) tube 70 x 70 mm -45° (rectangular) tube 70 x 70 mm +45° (round) solid material 50 mm +45° (round) tube 80 mm +45° (square) tube 70 x 70 mm +45° (rectangular) tube 70 x 70 mm

Condition: used, Circular panel saw Manufacturer: Griggio Model: CA40 Year: 2001 Nodew Nww Dspfx Aanjlk Country of manufacture: Italy

Condition: used, Circular saw Nljdpfxjwtd Hzs Aanek Manufacturer: Karl Mrozek Power: 5.5kw Year of manufacture: 1983 Table size (mm): 1180x670 Cutting depth mm max.: 50 - 125 Cutting width (mm): 1250