Used Clamping Device for sale (18,111)

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,400 kg, empty load weight: 380 kg, drive type: Keine, Cellulose/Bale Clamp Bjdpfx Ajy A Uadek Hjwl Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: None Technical Condition: Good Description: Type 1.5T413, sideshift +/- 100 mm, sideshift independent of the opening range, overall width 970 mm, opening range 495 - 1,675 mm, arm height 440 mm, arm length 1,000 mm, arms smooth on the outside, inside with round bar, arm tips beveled, load capacity 1,400 kg at 500 mm load center, installation depth 158 mm, own center of gravity at 289 mm, weight approx. 380 kg, incl. pressure gauge, connection ISO - Class 2 A.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, power: 1 kW (1.36 HP), Simar FX 2004 Material Conveyor Motor power: approx. 0.9 – 1.1 kW (brush motor) Power supply: 230 V / 50 Hz Container volume: approx. 3 – 4 liters Conveying capacity: approx. 60 – 100 kg/h Hose connection diameter: 38 mm (standard) Filtration: Polyester filter with automatic cleaning Bedpey Hldnefx Ak Hswl Simar FDX-2 Colorant Feeder Drive type: Stepper motor (high repeat accuracy of speed) Power supply: 230 V / 50 Hz Speed: Infinitely adjustable (depending on the control unit, typically 0.1 – 200 rpm) Colorant container capacity: approx. 5 – 10 liters Two units available Price: 950 EUR per unit!

Condition: good (used), Year of construction: 2016, functionality: fully functional, overall weight: 50 kg, power: 1.1 kW (1.50 HP), tank capacity: 3 l, Motor power: 1.1 kW (brushed motor) Power supply: 230 V / 50 Hz Bwodpfx Ajy Hk I Sek Hjl Container volume: approx. 5 litres Delivery rate: approx. 150 – 200 kg/h (depending on material) Max. conveying distance: approx. 15 – 20 metres Pipe/hose diameter: 38 mm (DN 38) Casing material: Polished stainless steel

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, overall weight: 20 kg, power: 1 kW (1.36 HP), tank capacity: 3 l, Motor type: Single-phase (brush motor / vacuum blower) Motor power: approx. 1.0 – 1.1 kW Power supply: 230 V / 50 Hz Container volume: approx. 3 litres Bodpoy Hk D Tsfx Ak Hewl Conveying capacity: up to approx. 100 kg/h (depending on material bulk density and hose length) Hose connection diameter: DN 38 (standard) Housing material: Stainless steel (V2A) Control: Microprocessor controlled, programmable filter filling and cleaning times 3 units available Price: 480 EUR / unit

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2.23024635/4097, overall weight: 15 kg, type of input current: AC, power: 1 kW (1.36 HP), tank capacity: 10 l, Motor power: 1 kW Supply voltage: 230 V AC (+/- 10%) Frequency: 50–60 Hz Container volume: approx. 10 liters Conveying capacity: approx. 10–120 kg/h (depending on material and distance) Required compressed air connection: approx. 5 bar (for filter cleaning/control) Bjdpfx Aey Hkyhsk Hswl Device weight: approx. 15 kg Material: stainless steel

Condition: ready for operation (used), functionality: fully functional, table height: 3,500 mm, total height: 3,500 mm, overall weight: 4,800 kg, total width: 1,200 mm, - Cast iron clamping angle: for workpiece clamping - Clamping surface: 3500 x 1200 mm - Weight: 4800 kg Bsdjy Evl Tspfx Ak Hjwl

Condition: used, Format: 0x0 Equipment: Linotype-Setzmaschine Bwjdpex Rcw Tjfx Ak Hol

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016 Bwodpfx Aovfxqyok Hjl

Condition: used, Format: Equipment: Speed: 4,300 cycles per hour Fold types: Letter, Single Fold, Zigzag Fold, Doub Job Memories: 20 Folding Capacity: 8 Sheets Document Feeder Capacity: 325 Sheets Maxi Feeder: 1,200 Sheets Envelope Capacity Hopper: 500 Envelopes Envelope Capacity Side Exit: 500 Envelopes Envelope Capacity Power Stacker: 500 Envelopes Set Thickness: 2.5mm Reverse Reading: Yes Cascade Feeding from all Feeders: Yes Bwjdpfxsx N Ng Eo Ak Hel High Capacity Power Stacker: Yes Dimensions: Depth: 460mm, Height: 920mm, Length: 1 Dimensions: Weight: 140 Kg (6 Stations)

Year of construction: 2026, condition: new, functionality: fully functional, Technical details: for band saw blades up to 206 mm wide Bodpfxeyz Sr Ue Ak Hswl Pressure measurement in bar Positioning through blade displacement Technical details: Blade width: bandsaw blades 30 - 206 mm Blade thickness: 0.6 - 2.4 mm Blade length: 4,000 - 11,000 mm Working speed: 4 - 20 m/min. Rated voltage: 3AC x 400V, direction of rotation "right" Frequency converter adjustable in steps Exact hydraulic pressure difference readable via pressure gauge Adjustable pressure lever Levelling roller incl. Anvil for repairing dents

Condition: excellent (used), For sale: Professional modular T-slot plate designed for securing workpieces during machining. Ideal for use with milling machines, grinders, and other workshop machinery. The modular system with blocks allows highly flexible and rapid setup of clamps. Various components can be mounted and adjusted to suit the workpiece. Dimensions: 77 x 40 cm. Condition: used, in good technical condition. Shows normal signs of use. Fully functional. The robust steel construction ensures stability and precision during operation. Bjdpfx Akeyyqkto Hswl

Condition: good (used), Year of construction: 2012, Pneumatic double diaphragm pump Cobra 40 -10 Good condition - Year of manufacture: 2012 Its unique design enables low-pulsation operation Consistent material flow ensures a perfect spray pattern and optimum surface quality Ideally suited for processing shear- and moisture-sensitive materials Minimal shear forces – ideal for processing UV coatings, for example Perfectly suited for processing small material quantities and for frequent color changes Scope of delivery: Basic unit on frame, HD twin hose 7.5 m, upper container 5 l Ex, AirCoat gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40 Technical data: Ratio: 40:1 Bjdpsy A Tqbsfx Ak Hswl Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Bwjdpfxjy A Tpqe Ak Hjl Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: used, functionality: fully functional, 4 used adjustable wheel clamps for recovery crane, etc., fully functional. No shipping possible. Please do not send email enquiries! If you have any questions, you can reach us by phone. Viewing and collection only by prior telephone appointment. Bwsdpfx Akey Ini Ne Hel Subject to changes, prior sale, and errors. We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: used, functionality: fully functional, Year of construction: 2014, overall weight: 629 kg, load capacity: 2,400 kg, load center: 650 mm, Paper roll clamp Bedpfx Aoy Ih Edok Hewl Load center: 650 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for operation and fully functional Technical condition: very good Description: Refurbished, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Weight: 629 kg Capacity: 2,400 kg / 650 mm Roll range: 200 - 1,300 mm Front dimension: 228 mm Mounting: FEM 3A

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Bsdpfxoyqr Sxo Ak Howl

Year of construction: 2003, condition: good (used), Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press -Manufacturer: WIMO Lifting Technology -Turning device: simultaneous turning of several stacks of circuit boards, or rotation of workpieces -Loading: loading and unloading from the front with a forklift -Maximum internal width: 4000 x 1700 mm -Maximum internal height: 580 mm -Minimum internal height: 250 mm -Load capacity: 6000 kg -Transport dimensions: 5960/2400/H2435 mm -Weight: 9000 kg Bodpfsyt Ncmex Ak Hswl

Condition: used, Offer 25351 Technical specifications: - Width approx. 1250 mm - Height approx. 1600 mm - Depth approx. 1000 mm - Plate thickness on the T-slot side approx. 90 mm - 8 pieces of T-slots, length 1250 mm - Center distance between T-slots each 200 mm - Distance from the outside 100 mm - T-slot width approx. 35 / 60 mm Bedpfx Aksy Ian Dj Hswl - T-slot depth approx. 28 / 32 mm - Weight approx. 1400 kg

Condition: new, Year of construction: 2014, operating hours: 46 h, load capacity: 300 kg, lifting height: 1,850 mm, fuel type: electric, mast type: duplex, construction height: 1,500 mm, Manufacturer + model LINDE L 16 (372) Mast 2W1850 + KAUP / Drum clamp ID 23032.5921 Mast 2W1850 Lowered height 1500 mm Lifting height 1850 mm Year 2014 Operating hours 46 Capacity 24 V / 345 Ah Bwedpfxey Ir R Dj Ak Hel Options: Equipped with free-carrying -> Drum clamp KAUP 0.8 R405 Drum clamp range = 450 to 850 mm

Condition: used, Assembly table, T-slot work table, welding table, T-slot table, T-slot plate Overall dimensions: 3500 x 2500 x 600 mm Weight: 8.9 t Bedey Emp Nepfx Ak Hjwl T-slot width: 36 mm Number of T-slots: 12 pcs

Condition: excellent (used), I offer a professional hydraulic rescue device from the renowned company LUKAS, model LSP 44 B. The equipment is used in rescue operations (e.g., fire brigade) and is distinguished by its very high build quality and reliability. Technical condition: The device is fully functional, tested, and ready for operation. It shows normal signs of use as visible in the photographs. Technical specifications: Manufacturer: LUKAS / FAG Kugelfischer Model: LSP 44 B Type: DSH-20-2 Power supply: 230 / 240 V Motor: Leroy Somer, approx. 1.1 kW Country of origin: Germany Set includes: Bwsdpfx Akjyxrbds Hel Hydraulic power unit Hydraulic hoses Hose reel Working element as shown in the photographs Application: Technical rescue Fire services Emergency services Hydraulic work

Condition: excellent (used), max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min ratio total power requirement 0,4 kW weight of the machine ca. 20 kg Bsdpfx Akjunt Eas Hjwl dimensions of the machine ca. m for Reishauer RZ 400 and other models.

Condition: excellent (used), Year of construction: 2020, liter capacity 240/300 l feed pressure siehe Plan bar coolant capacity 2900 l Bsdpfewgizwox Ak Hewl Filter capacity 6 m² total power requirement 45 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m

Condition: excellent (used), max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,4 - 8 pressure angle 15 - 25 ° turning speeds 2650 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, Am, ... Bwjdpjvf Riuefx Ak Hsl Adjustment plate on the right with micrometer screw adjustment axial To bracket a diamond roll.

Condition: excellent (used), Year of construction: 2013, liter capacity 300 l Bwjdpsxxmm Sjfx Ak Hol feed pressure 18,5 bar coolant capacity 2800 l Filter capacity 1,5 m² total power requirement 45 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m