Used Closure Mould for sale (2,178)

Condition: good (used), Four-side planer SCM SINTEX – very well-maintained machine from a small joinery Weight: 925 kg Dimensions (L x W x H): 340 x 100 x 160 cm 380V 4 spindles Bottom/top spindle 7.5 kW Left/right spindle 7.5 kW Max. working height 105 mm Max. working width 180 mm Infeed table 2300 mm Spindle diameter 40 mm Lrjdpfx Adjyuw Rnsvji

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 Lrodegrzh Eepfx Advoi 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, Year of construction: 2012, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, load hours: 55,400 h, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Ljdpfeylpy Asx Advori

Condition: used, Year of construction: 2012, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, load hours: 55,800 h, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Lrjdeylpyvspfx Advsi

Condition: used, PRICE: 2000 EUR Lsdpfxsuuip Is Advjri Bread maker for baguette bread Manufacturer: Seewer Rondo

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Lredpfjkucxlex Advsi Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Lrsdjukn S Hjpfx Advji Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: used, machine/vehicle number: 008403, Max. machinable height: 160 mm Lredpfx Adsykivhevei Maximum machinable width: 250 mm Max. forward feed speed: 24 m/min Operator shafts number: 5

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, Profile sander FLADDER 300/L.S.4 Year of manufacture: 1996 Ledoyrqzbepfx Advjri

Condition: ready for operation (used), Year of construction: 2018, operating hours: 5,600 h, functionality: unexamined, planing height: 240 mm, spindle diameter: 40 mm, planing width: 320 mm, overall weight: 9,000 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, surfacing fence height: 2,500 mm, Service by Rehomy BV (Netherlands) ----- 9 spindles: U-R-L-O-U-R-L-O-U Max. planing dimensions: 240 x 320 mm Removed from operation in working condition (machine has since been dismantled) Serial no. 18A1869 FEM9-32XC / RHINO 800XL Feeler-series 9 FEELER series A. Capacity: (1) Working width: 18–320 mm (2) Working thickness: 6–160 or 230 mm (3) Min. working length: 240 mm (4) Feed speed: 7–36 m/min B. Motors: (1) 1st bottom horizontal spindle: 10/20 HP with outboard bearing (2) 2nd right vertical spindle: 10/15 HP with outboard bearing (3) 3rd left vertical spindle: 10/20 HP with outboard bearing (4) 4th top horizontal spindle: 10/20 HP with outboard bearing (5) 5th bottom horizontal spindle: 10/20 HP with outboard bearing (6) 6th right vertical spindle: 10/15 HP with outboard bearing (7) 7th left vertical spindle: 10/15 HP with outboard bearing Ljdpfx Aeyguf Hedvori (8) 8th top horizontal spindle: 10/20 HP with outboard bearing (9) 9th bottom horizontal spindle: 10/20 HP with outboard bearing (10) Feed: 15 HP (inverter drive) (11) Elevation: 2 HP C. Spindles: (1) Spindle diameter: 50 mm (1st, 2nd, 3rd, 4th, 9th spindles); 40 mm (5th, 6th, 7th, 8th spindles) (2) Spindle speed: 6,200 rpm (3) Adjustment range vertical spindle: 80 mm (4) Adjustment range horizontal spindle: 35 mm D. Cutting circles: (1) 1st bottom horizontal spindle: 100–180 mm (2–9) All other spindles: 110–250 mm E. Miscellaneous: (1) Dust extraction outlet diameter: 160 mm (2) Infeed table: 2 or 2.5 m (3) Feed roller diameter: 140 mm (4) *Supplied with 50 mm cutter head F. Standard equipment: (1) Digital feed speed display DPRLF-40K (2) Automatic table lubrication system (3) Central lubrication system (point-to-point) (4) Pneumatic chip breakers on top spindles (5) Pneumatic fence on left spindles (6) CE-marked (7) Motor: IE3 efficiency Options: OP014-15 Variable feed speed controller, 15 HP inverter OP001 Pneumatic elevation for 1st and 2nd infeed rollers OP041 Outboard bearing for 2nd, 3rd, 6th, and 7th spindles OP017 Digital position controller for 3rd, 4th, 7th, and 8th spindles OP042C Enhanced soundproof enclosure OP023AE3-15 Feed drive motor, 15 HP (IE3) OP023BE3-10-15 Motor for 10/15 HP spindle (star/delta, IE3) OPO08-5 Extension table 2.5 m with stand and fence OP023BE3-10-20 Motor for 10/20 HP spindle (star/delta, IE3) OP002 Three-mode feed roller pneumatic elevation OPO10-230 Extra working height, 230 mm (2nd, 3rd, 6th, 7th spindles) OPO08A Air-cushion table, 320–400 mm Spindle sequence: Bottom, right, left, top, bottom, right, left, top, bottom

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Hersteller: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Machine weight: 4850 kg Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m Additional information & extras Lrsdpjxvy Rlsfx Advoi Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67).

Condition: used, Package of 400 injection moulds (excluding moulds for tables) Warehouse clearance – used injection moulds for sale, approx. 400 tools, 160 pallets. Lrodpfxjyf I Nve Advji Due to relocation, we are parting with our injection moulds for packaging, thin-walled containers, household items, etc. Total package price: €55,000.

Condition: good (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 280 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,065 bar, total length: 3,200 mm, total width: 1,350 mm, total height: 1,850 mm, overall weight: 2,900 kg, Equipment: documentation/manual, warehouse no.: 503562 manufacturer: ENGEL type: Victory 200-28 Tech controller: CC200 year of construction: 2011 clamping force: 280 kN size of mould plates h x v: 500 x 400 mm min. mould height: 150 mm max. open daylight: 550 mm opening stroke: 400 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor LxW: 2800mm x 350mm Discharge height: 950mm Speed: 9m/min machine incl. Handling machine incl. water flow regulator Anti vibration mounts interface for ejector plates safety interface for temperature control units Schuko-socket 10A selection unit measures of machine l x w x h: 4.4m x 1.9m x 2.1m total weight: 2900KG technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 Ljdpfoykpvbox Adveri year of construction: 2011 electric cabinet dimensions: 1,00m x 0,35m x 0,64m

Condition: excellent (used), Year of construction: 2012, operating hours: 49,130 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 42 mm, displacement volume: 214 cm³, injection pressure: 1,724 bar, ejector force: 20,400 N, ejector stroke: 130 mm, plate length: 610 mm, plate width: 635 mm, total length: 4,370 mm, total width: 1,210 mm, total height: 2,200 mm, overall weight: 3,730 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 725 mm, Equipment: documentation/manual, warehouse no.: 503452 manufacturer: BOY type: 90 E controller: Procan ALPHA year of construction: 2012 operation hours: 49130 h clamping force: 900 kN distance between tie-bars h x v: 430 x 360 mm size of mould plates h x v: 635 x 610 mm min. mould height: 250 mm max. open daylight: 725 mm opening stroke: 475 mm screw diameter: 42 mm swept volume: 214.7 ccm injection pressure: 1724 bar screw length: 20 l/d screw stroke: 155 mm screw speed: 280 min screw torque: 700 N plasticising rate: 136 g/s PS number of heating zones: 4 Ledpfx Aoyknr Ijdvsri nozzle stroke: 250 mm equipment included screen text german core pulling hydraulically 1x machine without material hopper machine without water flow regulator Anti vibration mounts interface EUROMAP 67 interface USB measures of machine l x w x h: 4.37m x 1.21m x 2.2m total weight: 3730KG

Condition: good (used), Code: 0234 Brand: SPANEVELLO - ITALY Model: SC 17 Automatic 7-spindle moulding machine for window frames, frames, profiles, joinery, carpentry, wooden packaging and various Technical data: Sturdy structure with electro-welded steel base Working width 170 mm Working height 120 mm Variable feed speed 5/25 mt/min Automatic lifting of upper beam Composition: 1° spindle: Surface planer - Motor Hp 4 2° spindle: Right vertical spindle moulder - Motor Hp 4 3° spindle: Left vertical spindle moulder - Motor Hp 4 4° spindle: Right vertical spindle moulder - Motor Hp 4 5° spindle: Thickness planer - Motor Hp 7,5 6° spindle: Right vertical spindle moulder - Motor Hp 4 7° Universal spindle 180° - Motor Hp 8,5 Diameter of shafts of working heads mm 40 Shaft rotations of working heads 6000 rpm Power of feed motor Hp 2 Suction inlet diameter 150 mm Ljdpfx Aexukgusdvsri Overall dimensions mm 4800 x 1650 x 1450 h Weight kg 3000

Condition: reconditioned (used), clamping force: 500 kN, screw diameter: 38 mm, injection pressure: 1,341 bar, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine. Lrjdpjwfp Hkofx Advji Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, clamping force: 805 kN, screw diameter: 42 mm, injection weight: 172 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this high precision BOY 80M injection moulding machine. The BOY 80 is one of the most compact 80t clamp machines around, a great allrounder, fitted with the Procan 2 controller and 42mm diameter screw, which gives a shot weight of 179 (PS)g. Lrjdpfjwfpqcex Advji Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: refurbished (used), functionality: fully functional, clamping force: 350 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Ledpfswqnggsx Advori Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Please note that the video shown is of a near identical machine previously refurbished by STV Machinery. It’s a good example of what can be expected once this machine is fully refurbished by our team. *The video shown in this listing is of a previously refurbished Arburg 221 which is similar to the Arburg 221KS machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: reconditioned (used), Year of construction: 2004, clamping force: 129 kN, ejector stroke: 30 mm, total length: 27,400 mm, total width: 810 mm, total height: 1,600 mm, overall weight: 920 kg, pump power: 5,500 W, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision BOY 12A injection moulding machine. Fitted with the Procan controller and 18mm diameter screw, which gives a shot weight of 9.64 (PS)g. The 12A from BOY is one of the most common small moulding machines we see, it is extremely accurate while still maintaining versatility with tooling and familiar control setup. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Ledpfx Adetpw I Uevori

Condition: excellent (used), Moulding frames, moulding boxes Lrsdpfx Adod Txz Ssvji approx. 270 pieces very good, immediately ready for use condition lashing on pallets ready for transport

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Max. forward feed speed: 25 m/min Operator shafts number: 6 Lredpfx Aow Iddzedvsi

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Hersteller: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Lrjdpfx Aoxhfuaedvsi Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005

Condition: good (used), Year of construction: 2007, Ref. no.: 18588 Hersteller: BATTENFELD Type: EM 30/55 Unilog B6 Run hours: 3.200 Electric machines Year of construction: 2007 Clamping unit Clamping force: 30 ton Distance between tie bars: 300 x 300 mm Mould height min.: 150 mm Mould height max.: 330 mm Opening width: 580 mm Platen size (h x v): 450 x 450 mm Injection unit Screw diameter: 18 mm Injection volume: 19 cm³ Shot weight: 17,5 g Lredpfx Asxdk Auodvji Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 1,1 x 1,9 m Machine weight: 2700 kg

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Lodpfow E E Evox Advsri Hersteller: KRAUSS MAFFEI Type: KM180-750 AX Electric machines Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg

Condition: used, Year of construction: 2012, clamping force: 320 kN, displacement volume: 1,54,314 cm³, injection pressure: 2,50,01,280 bar, overall weight: 14,500 kg, load hours: 69,990 h, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request Lodpexl Hi Tjfx Adveri terms of payment: 100% prior to delivery