Used Cnc Drillng for sale (8,395)

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: MH1500X13 MM 4 ROLL, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELAP, controller model: LYNX 4 AXIS, number of rollers: 4, roller (bottom) diameter: 200 mm, roller (top) diameter: 220 mm, side roll diameter: 170 mm, roller diameter: 250 mm, roller length: 1,550 mm, working width: 1,500 mm, working height: 800 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 3,300 kg, total length: 2,900 mm, total width: 1,450 mm, total height: 1,300 mm, power: 4.05 kW (5.51 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL PLATE BENDING MACHINE NC 1500X 13/10MM MG SRL HYDRAULIC MODEL MH1513 MM YOM 2010 PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Technical data: Bending capacity: plate width 1500 mm thickness rolling 13 mm pre-bending 10 mm --- minimum diameter of rolling D=250 mm depending on the plate thickness and yield strength --- Rollers useful length 1550 mm Upper roll 220 mm Lower roll 200 mm Side rolls 170 mm --- Voltage 3phase 400/50 electric motor 5,5 hp on hydraulic unit --- Configuration: Rollers hardened surface high strength Rotation rollers hydraulic powered with gear units Pre-pinch load control upon the different plate thickness and yield plate strength Console electric commands joysticks and digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with memory up to 200 programs Front opening hydraulic drop-end & upper roll tilt-up to remove the round closed shells Speed slow/fast variable Safety installations with emergency stop. Instruction manuals for operation and service. Dimension mm 2900x1450xH1300 mm Weight 3300 Kgs Gusdpjxmvhusfx Aabeh

Year of construction: 2020, operating hours: 10,245 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model iTNC 640 Main Drive Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 1100 mm Z-Axis Movement 940 mm W-Axis Movement 710 mm Workpiece Guodpfx Aajxirlzjboh Workpiece weight 3000 kg This 4-axis TOS Varnsdorf WHQ 10 CNC boring machine was manufactured in 2020. It features a spindle diameter of 100 mm, ISO 50 taper, and spindle speeds up to 2500 rpm. The table can handle weights up to 3000 kg and includes a 40-position tool changer. Currently operational, though "Y" axis calibration is needed. Consider the opportunity to buy this TOS Varnsdorf WHQ 10 CNC boring machine. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: used, Year of construction: 2012, turning length: 300 mm, turning diameter: 200 mm, CNC lathe DMC Korea model DL8TM C axis with driven tools Turret for 12 tools on VDI30 Chuck 210mm Spindle bore 51mm Gujdexgqrnspfx Aabjh Turning length 300mm Turning diameter 200mm Parts catcher Tailstock Chip conveyor

Condition: used, turning diameter 530 mm turning length 500 mm control OSP 700 L-G Description of features Machine type CNC lathe with milling unit (C-axis + driven tools) Machining axes X, Z and C-axis (C for rotating workpiece) Tool turret 8-12 stations, with driven tools Turning diameter above the bed: 530mm Turning diameter above the slide: 530mm Turning diameter above the cross slide: 340mm Centre distance: 500mm Spindle speed approx. 50 - 3500 rpm Driven tools For drilling, milling, thread cutting on the workpiece Guedpfx Aaswugr Aobjh circumferential surface C-axis Enables positioning in angular degrees (e.g. milling on circumference) Spindle bore approx. 50 mm Machine weight: approx. 5080kg All data without guarantee. This information is for guidance only. For further information, please contact . Translated with (free version)

Condition: used, Year of construction: 2018, chucking diameter 250 mm workpiece dia. 200 mm control Siemens 840 D sl c-axis Position genauigkeit arcs 10 tool turret with 12 work positions 12 turning spindle 2 spindle turning speed range 6.000 / (4.500) U/min Spindle power 26 / (28,3) max. torque on the spindle 150 / (300) spindle nose 55026 - A6 tool taper VDI 40 turning speeds 10.000 U/min z-travel 370 mm x-travel 30 mm y-travel +- 40 mm Gsdpjxap E Tjfx Aabjuh

Condition: used, Year of construction: 2019, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Gedpfx Aasxnmbnsbouh Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m '’MasterCut’ Plasma Rotator with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source TEKA filtration system 141025

Condition: as good as new (ex-display), 2-Column Horizontal Bandsawing Machine, Automatic Manufacturer: METALLKRAFT Model: HMBS 300 x 300 CNC X Ref. No.: 3690098 Condition: Demonstration machine (approx. 30–50 cuts) Minor dent on the lower right side of the door Year of manufacture: 2021 Serial No.: 3001705061F Cutting capacity (round): 300 mm Blade speed: 20–100 m/min, steplessly adjustable Standard features include: Gusdpfx Aoxm R D Doabsh - Chip conveyor - Machine lamp - Coolant system - Operating tools

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 5500 kg Main Drive Number of axis 3 Additional Equipment Laser Guidance: Ensures precise and fast operation. High-Speed Modes: Extremely efficient and quick operating capabilities. User-Friendly Programming: Easy-to-use interface with a large memory capacity, capable of storing over 10000 part files and programs. This 3-axis Safan E-Brake 80-2550-Ts3 CNC press brake was manufactured in 2006. Ideal for precision bending applications, it offers robust performance and reliability. Consider the opportunity to buy this Safan E-Brake 80-2550-Ts3 CNC press brake. Contact us for more information. Application Types Godpfjxgwdwox Aabjuh Bending

Condition: used, Year of construction: 2006, Hyundai Kia SKT 210SY lathe with Y-axis, C-axis, driven tools Fanuc 18iTB control with Manual Guide Max turning length 530mm Travel: X-axis 220mm Y-axis 80mm (+-40) Sauter 12-position tool turret for VDI40 Spindle bore 65mm, sub-spindle bore 33mm Tool probe Parts catcher Very good condition - Chip conveyor Guedpfx Aowyv T Hoabsh - Documentation - Tool holders

Condition: used, Year of construction: 2006, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel length X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Gedpfxsxnld Us Aabsuh Worktable TV with 10 supports L=1500 4 working zones 2 cross lasers Vacuum pump 250 m³/h PC control Windows Vertical milling unit ISO 30 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dongle for XILOG software Location: Nattheim

Condition: excellent (used), Year of construction: 2015, operating hours: 11,823 h, functionality: unexamined, machine/vehicle number: MO24163F1FE, chuck outer diameter: 152 mm, The Hwacheon CUTEX 160A is a high-performance Horizontal CNC Turning Center designed for stable, high-speed, and high-precision machining, making it ideal for mass production applications. This machine is built with a robust structure to ensure consistent accuracy and productivity. Key Basic Specifications Feature Specification (Approximate) Metric (mm) Chuck Size 6 inches 152.4 mm Max. Turning Diameter 11.81 inches Ø300 mm Swing Over Bed 21.65 inches Ø550 mm Max. Cutting Length 11.81 inches 300 mm Spindle Speed Up to 6,000 rpm 6,000 min$^{-1}$ Spindle Motor (Max./Cont.) 15 / 10 HP (Approx.) 11 / 7.5 kW Gusdpfxjxgz Ugo Aabsh Number of Tool Stations 12 Stations 12 ea Rapid Traverse (X/Z axes) 1,417 ipm 36 / 36 m/min Max. Stroke (X/Z axes) 6.69 inches / 13.19 inches 170 mm / 335 mm CNC Controller Typically FANUC 0i-TF Plus (or equivalent) - Sheets로 내보내기 Key Features Robust Structure: Features an integrated 45-degree slant bed made of high-quality cast iron, which provides exceptional rigidity and thermal stability for demanding cutting operations. High-Speed Productivity: Equipped with a turret offering an extremely fast indexing time, typically around 0.15 seconds per step, and high rapid traverse rates (36 m/min), minimizing non-cutting time. Precision and Stability: Utilizes high-precision linear guideways for smooth and accurate axis movement, ensuring superior finishing and dimensional accuracy. Capacity: The 6-inch chuck and ∅300mm (11.81 inches) maximum cutting diameter make it versatile for a wide range of small to medium-sized parts. This machine is engineered by Hwacheon for reliability and efficiency in manufacturing environments.

Condition: used, Year of construction: 2023, functionality: fully functional, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 80 mm, travel distance Y-axis: 260 mm, • Fanuc 31i-B5 control • 15 inch LCD color screen • Y-axis 260 mm (+/- 130 mm) • B-axis swivel range 230° (+/- 115°) • Milling spindle drive power 15/22 kW • Milling spindle speed max. 12,000 rpm • Main spindle drive power 22/26 kW • Speed 4,000 rpm • Spindle nose A2-8 • Bar capacity main spindle 80 mm • Counter spindle drive power 15/22 kW • Speed 4,000 rpm • Spindle nose A2-8 • Direct position measuring systems X1, Y1, Z1-axis • 12-position turret • Milling spindle with B-axis • Y-axis • HOWA clamping cylinder and chuck (L) • HOWA clamping cylinder and chuck (R) • 2 C-axes incl. disc brake • M-function open/close chuck • Chuck foot switch • Coolant system with 4 pumps • Automatic central lubrication • Automatic machine shut-off • Hinge belt conveyor right side • LED work area lighting • 1 set machine documentation Guodpswpkp Iofx Aaboh • CE specification FANUC 19" HMI Touch Panel iH Pro instead of the 15" standard screen HMI touch panel from Tool holder: Capto C6 Number of slots: 80 pieces Tool monitoring system Raku Raku 1. Tool management 2. Load monitoring 3. Compensation management 4. Operating information KITAGAWA power chuck 3-jaw BB210 • Passage 81 mm • Jaw stroke in diameter 8.8 mm • Base jaw toothing 1.5 mm x 60° • Speed max. 4,500 rpm KITAGAWA power chuck main spindle Hydraulic hollow clamping cylinder SS1881K • Passage 81 mm • Piston stroke 25 mm • Speed max. 4,800 rpm SMW power clamping device Hydraulic full stroke cylinder SIN-S 125 • Pressure max. 70 bar • Tensile force at 40 bar 41 kN • Speed max. 6,000 rpm Bar feeder interface incl. "Optional block skip" 3-color signal lamp Tool setter (manual) Integrated unloading device counter spindle • Diameter max. 80 mm • Length max. 200 mm • Weight max. 3 kg Automatic work area door Belt switch automatic work area door Transformer 120kVA TMX-4000ST Machining condition selecting function Kinematic setup procedure Kinematic adjustment FANUC via iHMI - Renishaw touch probe RMP600 - Macro software - Amplifier - C6 holder - Calibration sphere - Interface Gear skiving function 3D collision avoidance KNOLL KF300/1800 70 bar with throughflow cooler alpha 9-E - Clean water tank: 1,800 l capacity - 1 x low pressure pump: 150 l/min / 3.1 bar - 2 x medium pressure pump: 40 l/min / 7 bar - 1 x high pressure pump: 20 l/min / 70 bar - 1 x frequency converter high pressure pump - 1 x double switch filter - 1 x throughflow cooler alpha 9-E - 7 pressure stages KNOLL scraper belt conveyor 500 K-1 Conveying height 1,700 mm Discharge height above floor 1,150 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 135667, turning diameter: 280 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, controller model: OKUMA OSP-T200L, workpiece length (max.): 200 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Swing diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm X-axis travel: 210 mm Y-axis travel: 330 mm C-axis travel (indexing): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool stations in turret: 12 MACHINE DETAILS Control: OKUMA OSP-T200L Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 mm Weight: 6,500 kg EQUIPMENT Feeder belt Three pallets Gusdjxnlh Tspfx Aaboh Note: The tool holders and tools visible in the working area are not included in the scope of delivery or sale. Any oil mist extraction unit or pallets shown on the feeder belt in the photos are also not included in the sale or delivery.

Year of construction: 2002, condition: ready for operation (used), Control Unit Brand SIEMENS Model Sinumerik 840 D This GEIBEL & HOTZ RS 2000 CNC cylindrical grinding machine was manufactured in 2002. It features a center height of 230 mm, a center width of 2000 mm, and a maximum grinding diameter of 355 mm. Equipped with Siemens 840 D control, it has a drive power for the external grinding spindle of 9 kW and an internal grinding spindle of 2.2 kW. Total weight is 10000 kg. Contact us for more information about this machine. Guodpfx Aasxnr Imjbjh Application Types Grinding

Condition: used, Year of construction: 2005, Mazak QTN 200 lathe, year of manufacture 2005 Mazatrol 640T 210 mm Kitagawa BB 208 chuck Spindle bore 65 mm Turning length 500 mm Turning diameter 380 mm Gujdoxgpqpjpfx Aabjh Tailstock Tool probe

Condition: used, Year of construction: 2010, · Working area: 2700 x 1300 mm · Travel X-Y: 3070 x 1750 mm · Travel length Z-axis: 270 mm · Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The layout of the machine allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The working unit is in turn attached to this mobile unit carrier on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit F12: Drilling head with 12 + 6 spindles · 7 individually accessible vertical spindles in X · 5 individually accessible vertical spindles in Y · 4 horizontal spindles in X (2 + 2) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm (6,000 rpm optionally available) · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fit · pneum. Feed stroke: 60 mm Grooving saw unit in "X" · Integrated in the drill head · Grooving saw blade with a diameter of up to 120 mm Main milling unit: · Tool holder HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power 7.5 kW (10 HP) from 12,000 rpm (S6) · Right / left rotation · Ceramic bearings (other power classes are optionally available) Tool changer R4 Automatic tool changing device for 4 tools. Traveling on the rear unit carrier to allow quick access to the tools. · Number of tool positions: 4 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total weight of all tools: 16 kg · Mount for 1 angle gear · Traveling in X (other and larger tool changers are optionally available) Work table The work table is designed to guarantee the operator maximum freedom of movement. The quick vacuum clamping system ensures maximum flexibility with exact positioning and optimal hold of the workpieces. · 6 supports 1000 mm continuously pneumatically adjustable in X · 12 round vacuum suction cups D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) 1 stop in Y per support (6 in total) · The retractable reference stops are controlled by CNC · Pendulum machining as standard (2 work areas) --- other clamping systems are optionally available --- Axis movement The drive system in X, Y and Z is via ground recirculating ball bearings of the highest precision class. Such characteristics are important to ensure balanced movement even with more complex work. The movement of the various axes is carried out by brushless three-phase servo motors / brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These features make this type of drive completely maintenance-free. · Rapid traverse in Gedpexnld Isfx Aabouh

Year of construction: 2003, condition: ready for operation (used), Main Drive Spindle speed range 1500–18000 Godpfx Asxnr H Ajabouh Tool taper HSK F63 Number of axis 4 Tools Max weight 6 kg Max tool length 200 mm This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), CNC lathe Smec PL2000M, year 2021, C-axis, driven tools, 8-inch chuck, 65 mm bar passage Gjdpew Hukksfx Aabsuh

Condition: used, Year of construction: 2011, Basic machine Stk Volt 400 EU Stk #93.07.31 Series 800 TV working areas 5020x1905 Stk # 52.19.14 8 Matic supports (Y=1825 mm) with 3 basic modules Stk # 52.19.92 for automatic vacuum suction cups Additional basic module for automatic vacuum suction cups Matic Stk # 52.19.99 4 working areas H= 50 Stk # 52.21.63 Front and rear stops H=50- 8 traverse Stk # 52.24.11 Integrated additional stops H=50 mm for 8 traverse Stk # 52.24.15 Central double rail (removable) with 6 stops Stk # 52.24.18 H=50 mm suction cup TV 145 x 30 H50 Stk # 52.18.69 Suction cup TV 145 x 55 H50 Stk # 52.18.70 Suction cup TV 145 x 145 H50 Stk # 52.18.71 8 Posi-Aids H50 Stk # 52.21.66 Group 800 - Electrospindle Prisma K 11 kW Stk # 52.21.80 Drilling head F50L2 (38V-80X-40Y-L0/90°) Stk # 52.22.51 PBTC-On Pos.3 Electrospindle PB+Rapid 6 Stk # 52.21.96 Tool magazine Rapid 12 on board (X,Y-traveling) Stk # 52.22.90 Stk # 52.22.92 Vacuum pump with 250 (300) M3/H50(60) HZ Item # 52.21.97 Guedpfx Asxnldhoabsh Storage Location: Supplier

Condition: ready for operation (used), Year of construction: 2000, operating hours: 99,800 h, General Data Measurements height 2200 mm Control Unit Model TRUMPF CNC TRUMAGRAPH CC220S Main Drive Punching force 220 kN Number of axis 2 Guodpewfiifjfx Aaboh Media Main electronic connection 17 kVA / 50 Hz This TRUMPF Trumatic 500 was manufactured in 2000. A robust CNC punch press, it offers reliable performance for your punching needs. Consider the opportunity to buy this TRUMPF Trumatic 500 CNC punch press. Contact us for more information about this machine. Application Types Punching

Condition: used, Year of construction: 2017, Doosan Puma GT3100M year 2017 Year of manufacture: 2017 Control: Fanuc 0i-TF Turning diameter: 376 mm Turning length: 1245 mm Main spindle: Belt-driven spindle Maximum spindle speed: 2800 rpm Maximum power: 22 kW Maximum torque: 1124 Nm Bar capacity: 102 mm Gedexggktepfx Aabouh 3-jaw chuck, Schunk ROTA THW plus 315-104 12-station turret BMT65 turret head Travel in X/Z axes: 260/1350 mm

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Gjdpfx Asxnldbsabouh

Year of construction: 2021, condition: ready for operation (used), Main Drive Spindle speed range 24000 rpm Spindle motor power 12 KW Tool taper HSK F63 Number of axis 3 Movement X-Axis Movement 3500 mm Y-Axis Movement 950 mm Z-Axis Movement 80 mm Table Table load 130 kg Gujdpfx Aaoxnd I Eoboh Tools Max weight 7.5 kg Additional Equipment Teleservice package via Internet Automatic central lubrication 4-fold linear changer for use with power packs This 3-axis FORMAT4 Creator 950 CNC Wood Machining Centre was manufactured in 2021. Ideal for precision woodworking, it offers robust construction and advanced control features. Consider the opportunity to buy this FORMAT4 Creator 950 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: used, Year of construction: 2007, DOOSAN PUMA 240MC Control: Fanuc 21i-TB Year of manufacture: 2007 Spindle bore: 76 mm Max turning length: 501 mm Gsdpfx Aaexgf T Tebjuh

Condition: used, Year of construction: 2012, Feeler NBP 1300A Year of manufacture 2012 Godpfx Aasww Indebouh X-axis travel 1300 mm Y-axis travel 610 mm Z-axis travel 600 mm Table 1500x600 mm Spindle 12,000 rpm BT40 Spindle coolant Heidenhain TNC 530 control