Used Cnc Turret Press for sale (34,865)

Condition: good (used), Year of construction: 2004, overall weight: 40,000 kg, pressing force: 450 t, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Fgodpfxju Au U Ts Aabjh Bending length: 4.100mm Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW

Condition: used, Year of construction: 1984, pressure 500 t passage width 750 mm stroke 120 mm total power requirement 57 kW weight of the machine ca. 16 t dimensions of the machine ca. m Fodpfx Ajt Hwpyoabogh

Condition: new, functionality: fully functional, Year of construction: 2025, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. Fgsdpjrq D Nijfx Aabsh The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Year of construction: 2013, condition: ready for operation (used), Main Drive Number of axis 3 This 3-axis BOSCHERT Compact 1250 Rota was manufactured in 2013. It features a working area of 1270 × 2000 mm and handles sheet thickness up to 6 mm. Equipped with a rotational tool changer, it offers versatile punching options and a user-friendly CNC control. Its compact design saves space while ensuring robust and durable construction. Ideal for batch and small to medium production runs. Contact us for more information about this machine. Application Types Fsdpfowvmy Asx Aabjgh Punching

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, Vertical Turret Lathe - Double Column with boring and milling unit and grinding device / Brand: CKD-BLANSKO / Type: SKD 50 CNC / Year of construction: 1992 Retrofit/Modernization: 2011 (Electrical and mechanical overhaul/modernisation) The machine can be inspected by appointment. Condition: Functional / ready for immediate use. TECHNICAL SPECIFICATIONS: - CNC Control: SINUMERIK 840D SL Working area: - Faceplate diameter: 4.770 mm - Swing diameter: 5.300 mm - Turning height max.: 4.000 mm / max. height without tools: 4.130 mm - Table load max.: 100 tons - Z-axis (RAM): 1.950 mm Crossbeam: - Travel: 3.600 mm Fgsdsv Uzw Uspfx Aabsh - Adjustment speed: 500 mm/min Pick-up Magazine: - 8 Tool holder positions - Automatic clamping of the tool holder in the ram - 1 straight boring head - 1 Angle head, 90°(not in pick-up) - Machine weight approx.: 110 tons There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: excellent (used), Year of construction: 2007, Synchronized hydraulic press brake MECOS Mod. Syncro 200/4000. Numerco ESA KVARA control. NR.07 Controlled axes (Y1-Y2-X-R-Z1-Z1-Z1) WILA automatic compensation table. Pneumatic tool attachment: Type Promecam, Tecnostamp H=150 mm. Useful bending length: mm 4050. Power exerted: Ton 200. Front safety devices: DSP LASER. Fgedpfx Aaov S Ad Rebeh Weight: kg 24,000.

Condition: good (used), functionality: fully functional, Year of construction: 2003, working width: 4,300 mm, throat depth: 450 mm, distance between stands: 3,700 mm, operating speed: 120 mm/s, reverse speed: 120 mm/s, back gauge: 550 mm, overall weight: 21,500 kg, total length: 5,100 mm, total width: 2,000 mm, total height: 3,300 mm, pressing force: 300 t, Equipment: safety light barrier, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe Fgodpfx Aaewc Sbrsbeh - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: used, Year of construction: 1994, turning diameter 1250 mm swing diameter 1160 mm turning height 800 mm faceplate diameter 1000 mm total power requirement 97 kW weight of the machine ca. 25000 t dimensions of the machine ca. m P I T T L E R (Germany) CNC Controlled Vertical Turning and Milling Centre With Tool Changer and Pallet Changer Model PV 1250 / 1-1 Year 1994 _____ Turning Ø max. 1,000 mm Swing Ø max. 1,160 mm Turning length 800 mm X Axis - horizontal 1,300 mm Y Axis - vertical 800 mm Feed / quick feed 16,000 mm/min Main spindle speeds 10 - 1,000 rpm ! Main spindle speeds via separate C Axis 0.1 - 16 rpm Positioning accuracy of C Axis 360° + / - 5 " Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speed 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Fsdpfx Ajt Hwy Sjabegh Spindle drive 63 kW Total electrical load 97 kW - 400 V - 50 Hz Weight, approx. 25,000 kg Accessories / Special Features * CNC Contouring Control Model NUM 760 TX in 3 axes, with graphics, menu-guided dialogue programming, and all the usual options, cycles and sub-programs; with tool compensation, thread cutting cycles, constant speed programming, etc. * 2-axis CNC tool slide (1,300 x 800 mm) with driven tool holders, ISA 50 / 22 kW. * Tool changer with 16 tool holders, max. length 450 mm, max. weight 40 kg. * Pallet changing system, pallet size 630 x 630 mm, with setup station with indexing and drive of the pallet, and 2 separate pallet stations. * 3 pallets, 630 x 630 mm. * 3-jaw chuck, Ø 650 mm. * Face plate, Ø 900 mm. * Chip conveyor. * Band filter coolant equipment. * Completely covered working area, including safety fence for the pallet changing area. * Separate switch cabinet. * Operating manual. * Approx. 20 tool holders. * Various other accessories. High performance universal turning and milling centre for full range of machining (turning, boring, drilling, milling, and threading) with high speeds and high turning volume. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have a selection of modern lathes available. Please let us know your requirements

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Fgodpfovfy Sxox Aabeh Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Condition: Very good One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: used, Year of construction: 1980, turning diameter 7000 mm faceplate diameter 3500 mm workpiece height 3000 mm 160 mm 1998 Control Siemens 840 C max. table load 60000 kg electr. connected load 400 V Serial number 11 33 0051 total power requirement 71 kW weight of the machine ca. / t required space 13 x 6 m The SCHIESS-FRORIEP 40 DV is a vertical lathe built in 1980. The machine was modernized and improved in 1998. Among other things, a driven tool system (C-axis) was installed. In addition, the control system was modernized to SIEMENS 840 C. The large open-sided vertical boring mills with travelling column - type DV - are particularly suited to situations where likely workpieces frequently change in diameter but where maximum workpiece dimensions are rare. Decisions in favour of this type of machine are generally due to minimum floor space requirement, universal adaptability and economical advantages. The modern design of these machines is characterized by rigid all-steel Fjdpfx Asuddlzsabegh construction optimized by computer - SCHIESS can claim to have done much valuable pioneering work in this area of heavy-duty machine tool building.

Year of construction: 2000, operating hours: 99,800 h, condition: ready for operation (used), General Data Measurements height 2200 mm Control Unit Model TRUMPF CNC TRUMAGRAPH CC220S Fsdpfx Ajwfiifsabegh Main Drive Punching force 220 kN Number of axis 2 Media Main electronic connection 17 kVA / 50 Hz This TRUMPF Trumatic 500 was manufactured in 2000. A robust CNC punch press, it offers reliable performance for your punching needs. Consider the opportunity to buy this TRUMPF Trumatic 500 CNC punch press. Contact us for more information about this machine. Application Types Punching

Condition: new, Year of construction: 2025, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-53TX controllers as standard and optionally DELEM DA53T, DA-58T, DA-66T, DA69T and CYBELEC 12 controllers, which provide a wide range of functions that allow for the implementation of the most demanding bending tasks. Dkeb A D Nwouw Ri Asw Aon Main Features: Front supports: 2 pieces on linear guides, ensuring stability during bending operations Y1, Y2 axis adjustment: automatic Back stop adjustment (X axis): servo drive on encoders Fgsdpfx Ajuw Scdjaboh R axis adjustment: servo drive on encoders Automatic adjustment of the deflection arrow Double-sided punch mounting: quick assembly type AMADA, enabling quick tool changes Technical parameters Max. thickness of bent sheet metal (S235) up to 6.0 mm Nominal pressure 1700 kN Maximum length of bent sheet metal 3200 mm Depth of cut in beams (throat) 320 mm Maximum stroke of moving beam 120 mm Maximum opening height 390 mm Distance between beams 2700 mm Rear bumper departure 600 mm Engine power 9.5 kW Length 3870 mm Width 1550 mm Height 2460 mm Weight 7400 kg Additional equipment and models with different pressure available. Please contact the seller.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Electric press brake PBE-1204-CNC STEP ROCK22+ Specifications - Max working thickness (S235): up to 3.0 mm - Nominal pressure: 400 kN - Max working length 1250 mm - Throat depth: 300 mm - Max stroke: 210 mm - Daylight: 410 mm - Distance between side frames: 2600 mm - Max backgauge distance: 750 mm - Nominal motor power: 2.0 kW - Length: 1960 mm - Width: 1450 mm - Height: 2610 mm - Weight: 4000.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs Fgodpfx Aaerp Dp Tobjh - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electric current: 37,5 KWweight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE! CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Fgjdpfov Rtg Tjx Aabjh Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Condition: Very good One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: new, Year of construction: 2025, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-53TX controllers as standard and optionally DELEM DA53T, DA-58T, DA-66T, DA69T and CYBELEC 12 controllers, which provide a wide range of functions, enabling the implementation of the most demanding bending tasks. Main Features: Front supports: 2 pieces on linear guides, ensuring stability during bending operations Y1, Y2 axis adjustment: automatic Rear stop adjustment (X axis): servo drive on encoders R axis adjustment: servo drive on encoders Automatic adjustment of the deflection arrow Double-sided punch mounting: quick assembly type AMADA, enabling quick tool changes Technical parameters Max. thickness of bent sheet metal (S235) up to 6.0 mm Nominal pressure 1300 kN Maximum length of bent sheet metal 3200 mm Depth of cut in beams (throat) 320 mm Maximum stroke of moving beam 120 mm Maximum opening height 390 mm Distance between beams 2700 mm Rear bumper departure 600 mm Engine power 9.5 kW Length 3870 mm Width 1550 mm Height 2460 mm Fgedpfxjuw Ri Ae Aaboh Weight 7400 kg Additional equipment available. Please contact the seller.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2508-CNC Delem DA-58T Specifications - Maximum bending thickness (S235): up to 4.0 mm - Nominal bending force: 800 kN - Maximum bending length: 2500 mm - Throat depth: 250 mm - Maximum stroke: 120 mm - Daylight: 385 mm - Distance between side frames: 2000 mm - Backgauge travel distance: 600 mm - Motor power output: 5.5 kW - Approaching speed: 0 kW - Length: 2600 mm - Width: 1450 mm - Height: 2300 mm - Weight: 4800.0 kg Tools - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram drive (travel along the Y-axis): servo motor - Backgauge fingers positioning (R-axis): manual - Punch quick change tooling system form AMADA DA-58T control - One-click program generation - Advanced operator support based on algorithms - Advanced graphic simulation of bending sequences - Included prompts for the operator - Algorithms to shorten the production process - Automatic crowning calculation - High-resolution TFT touchscreen - USB interface Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Steel hydraulic line tubings Hydraulic lines made of steel instead of rubber reduce the risk of future leaks. Ergonomics The operator can work freely throughout the machine's working area thanks to the mobile foot switch and the controller on the swivel arm. Additional LED lighting ensures a comfortable view of the workpieces in any situation. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Oil cooling system The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials 2-day training including installation of the machine Fgjdpfx Aaeiumyzebjh - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, pressure: 125bending length: 3200column width: 2655motor: 11slide stroke - max.: 200Machine Model: Nominal Force: 125 kNBending Length: 3200 mmDistance Between Columns: 2655 mmThroat Depth: 400 mmSlider Stroke: 200 mmMax Opening: 455 mmSlider Down Speed: 180 mm/sSlider Return Speed: 160 mm/sSlider Working Speed: 13 mm/sMain Motor Power: 11 kWCNC System: ZY68Number of Control Axes: 4+1Oil Tank Capacity: 300 L Fodowacqxopfx Aabegh Back Gauge XX-Axis Travel: 600 mmX-Axis Speed: 200 mm/sPositioning Accuracy: ±0.10 mmRepeat Positioning Accuracy: ±0.015 mmMotor Power: 0.85 kW Back Gauge RR-Axis Travel: 150 mmR-Axis Speed: 100 mm/sPositioning Accuracy: ±0.10 mmRepeat Positioning Accuracy: ±0.015 mm Dimensions:Length: 3450 mmWidth: 1580 mmHeight: 2550 mmWeight: 7100 kg Delem T53 Control System (Additional ¤5,000)

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-CNC OT-41 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm Fodpfegi Dk Dex Aabjgh - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, pressure: 40bending length: 1600column width: 1980motor: 4slide stroke - max.: 150opening width: 370CNC Press break KK Industries 40x1600 4 Axis Y1-Y2-X-R mit CNC Bombing Technical Parameters:Nominal Pressing Force: 63 kN Bending Length: 1600 mm Distance Between Columns: 1980 mm Throat Depth: 250 mm Slider Stroke: 150 mm Maximum Opening: 370 mm Slider Down Speed: 180 mm/s Slider Return Speed: 150 mm/s Slider Working Speed: 15 mm/s Main Motor Power: 4 kW CNC System: ZY68 Number of Control Axes: 4+1 Oil Tank Capacity: 90 L Back Gauge:X-Axis:X-Axis Travel: 600 mm X-Axis Speed: 200 mm/s Positioning Accuracy: ±0.10 mm Repeat Positioning Accuracy: ±0.015 mm Motor Power: 0.85 kW R-Axis:R-Axis Travel: 150 mm R-Axis Speed: 100 mm/s Positioning Accuracy: ±0.10 mm Repeat Positioning Accuracy: ±0.015 mm Fsdpfx Aaewacq Eobegh Dimensions and Weight:Length: 1850 mm Width: 1250 mm Height: 2180 mm Weight: 2700 kg Motor Power (additional): 0.85 kW Delem T53 Control System (additional cost 5,000¤)

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC Delem DA-58T Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new Fgedpfx Ajgih Iusabsh - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, pressure: 160bending length: 3200column width: 2655daylight: 400motor: 11slide stroke - max.: 200repeat accuracy: 0,015precision of position: 0,10CNC Press Brake 3200 mm x 160 t Standard Equipment:Sturdy construction for high stability and precision. CNC Axes: Y1, Y2, X, and R axes for precise control and accurate bending operations. Motorized CNC crowning device with CNC control for precise adjustments. CNC control system from the manufacturer (similar to Delem) for user-friendly operation and high flexibility. Back gauge with linear guide and ball screw, equipped with 4 back gauge fingers for precise material positioning. 2 sheet metal support arms for ergonomic handling of the material. Laser protection device on the upper beam to ensure safety during operation. Fgodpfxsv S Npys Aabsh Quick clamping for upper tooling for fast and easy tool change. Upper tooling system: Promecam Amada, split and offset for maximum flexibility. Multi V die system: Both Promecam and Amada systems are compatible. CE safety equipment to comply with all relevant safety regulations.

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist Fodpfjgi Dlpex Aabsgh We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, pressure: 135bending length: 3200column width: 2700daylight: 430stroke lenght (max.): 200column throat depth: 400messurements (LxWxH): 4200x1900x2700weight approx.: 9.700 Promotion price only valid on machines in stock Fgjdpfjfrz Hyox Aabsh

Condition: new, pressure: 135bending length: 4000column width: 3300daylight: 430stroke lenght (max.): 200column throat depth: 400messurements (LxWxH): 4800x1900x2700weight approx.: 10.000 Fgsdpef Am Rhsfx Aabeh

Condition: new, pressure: 175bending length: 3200column width: 2700daylight: 430stroke lenght (max.): 200column throat depth: 400messurements (LxWxH): 4200x1900x2700weight approx.: 10.000 Fjdpfxod Aklls Aabegh