Used Cnc Weeke for sale (69)

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Nkedjwuclxjpfx Adwst Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: good (used), Year of construction: 2011, I sell the 3-axis CNC working centre HOMAG WEEKE VENTURE 106M with beam table Year 2011. Configuration: 3-axis main spindle 9 KW Tool magazine 9 positions HSK63 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 3050 x 1260mm. 2 working fields, 2 clamping areas Automatic central system of lubrication. Software WoodWop 6.0 with full instructions. Njdpfx Adevld Epswjkt Pump BECKER 110m3/hr. Good condition. Available immediately.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 0-250-05-2110, travel distance X-axis: 3,950 mm, travel distance Y-axis: 1,730 mm, travel distance Z-axis: 280 mm, total length: 8,400 mm, total width: 4,660 mm, overall weight: 7,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 7,500 W, Equipment: rotational speed infinitely variable, Very well-maintained WEEKE CNC machining center BP 155 Nedpfexy Snwox Adwjkt The machine is operational and can be tested at any time. A forklift for loading is also available.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-250-12-2554, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, TECHNICAL DETAILS Minimum part dimensions (X, Y, Z): 250 mm x 100 mm x 8 mm Maximum workpiece dimensions (X, Y, Z): 3,000 mm x 1,000 mm x 80 mm Upper vertical working head Number of vertical electrospindles: 1 Vertical electrospindle power: 6 kW Grooving saw (90° to the X-Y axis), diameter: 125 mm Number of vertical drill spindles: 32 Vertical drill spindle power: 2.7 kW Number of horizontal drill spindles: 10 (8 in X + 2 in Y) Lower vertical working head Number of vertical electrospindles: 1 Vertical electrospindle power: 6 kW Grooving saw (90° to the X-Y axis), diameter: 125 mm Number of vertical drill spindles: 32 Vertical drill spindle power: 2.7 kW Number of horizontal drill spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS CNC control: PC 85 Software: woodWOP 6 Electrical data Voltage: 380 V Frequency: 60 Hz Phases: 3 Power: 62 kW Current: 125 A Control voltage: 24 V EQUIPMENT Simultaneous processing of two panels Safety enclosure for the working head No. 2 clamps for fixing and moving the workpiece Loading station with air cushion Discharge of panel(s) via motorized roller conveyor Nkjdpfxsxx R Sle Adwet Safety system with perimeter fencing and front safety mats

Condition: used, Year of construction: 2002, Machining Centre Manufacturer: Weeke Type: R BHC 500 Year of manufacture: 2002 Three-axis machine The drilling head is defective – non-functional Working area: 3,250 x 1,300 mm Sale without tools. The machine has already been dismantled. Nkedpfx Asxl Rxredwjt

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 machining dimension X: 2.500 mm machining dimension Y: 1.300 mm Machining dimension Z: 4 - 80 mm Nkedpfxoh E Sghs Adwot Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 drilling spindles horizontal X: 16 drilling spindles horizontal Y: 4 grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18.000 rpm Disassembled - directly available

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0-250-18-0294, travel distance X-axis: 3,900 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 370 mm, table width: 1,355 mm, table length: 3,550 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obliges timely collection by the end of calendar week 45! TECHNICAL DETAILS X-axis travel: 3,900 mm Y-axis travel: 1,350 mm Z-axis travel: 370 mm Number of milling spindles: 1 Table length: 3,550 mm Table width: 1,355 mm Nkjdpfx Adsxgd Ezewet Z-axis working range: 100 mm MACHINE DETAILS Weight: 4,500 kg Power: 22.0 kW EQUIPMENT Drilling tool Documentation CE marking

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, total height: 1,900 mm, total length: 1,500 mm, total width: 700 mm, overall weight: 500 kg, Mortising machine for furniture locks Manufacturer: Weeke SEM/1 Year of manufacture: approx. 1959 Nedpfx Asugv Akjdwokt Machine data: Dimensions (L/W/H) approx. 700 x 500 x 1750 mm With chassis and stop: approx. 1500 x 700 x 1900 mm Total weight approx. 500 kg Detailed description: see function description in images Pneumatic clamping via foot switch Mobile unit Application: for mortising furniture locks, hinges, strike plates Machine is fully functional and cleaned. Very good condition.

Condition: used, Year of construction: 2015, POWER PC 85 + WOODWOP 6.0 control (updated in 2023) Working dimensions: 3050 x 850 mm Working thickness: 12 - 60 mm Drilling head with 19 independent spindles arranged as follows: - 8 vertical spindles on the X-axis - 5 vertical spindles on the Y-axis - 4 horizontal spindles on the X-axis - 2 horizontal spindles on the Y-axis 1 3-axis vertical router with automatic tool change 4-position automatic tool change 1 integrated blade unit - diameter: 100 mm Total installed power: 12 kW Weight: 1450 kg Njdpfx Aexp Rqisdwokt

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Nedpfx Adjhwi U Tjwskt Y axis working area: 1550 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm Nkjdpfx Adot Hmt Iowst No of injectors: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Nkedoum H Ekepfx Adwet Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13

Condition: not inspected (used), Year of construction: 1976, machine/vehicle number: 1299, Brand: Weeke Model: PE 75 Nkedpfxeu Nwzco Adwot Year of manufacture: 1976 Motor: 7.5 kW, 50 Hz, 380V, 3-phase Stock number: 10316

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Nkedpfx Adekw H Ekjwet Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: used, Year of construction: 2012, Automatic CNC machining center for efficient and precise drilling and milling of panel furniture components wooden PC 85 numerical control - woodWOP 6 software Safety cabin for the working head N. 2 clamps for blocking and moving the piece during machining Loading bench by air curtain table Minimum dimensions of the piece (X - Y - Z) mm 250 x 100 x 8 (2 x 4 mm) Maximum dimensions of the piece (X - Y - Z) mm 3000 x 1000 (optional mm 1300) x 80 (2 x 40 mm) Possibility of processing two panels simultaneously N. 2 working heads (one lower and one upper) composed as follows: * Upper vertical work head N. 1 ETP-6 vertical electrospindle (power Kw 6) N. 1 Grooving saw (90° on the X-Y axis) dia. 125mm N. 32 vertical drilling spindles (power Kw 2,7) N. 10 Horizontal drilling spindles (8 in X + 2 in Y) * Bottom vertical working head N. 1 ETP-6 vertical electrospindle (power Kw 6) N. 1 Grooving saw (90° on the X-Y axis) dia. 125mm N. 32 vertical drilling spindles (power Kw 2,7) N. 10 Horizontal drilling spindles (8 in X + 2 in Y) Evacuation of the panel (panels) by motorized belt roller conveyor Security system with perimeter grilles and frontal safety mats Nsdpfovz A E Tox Adwskt

Condition: used, Year of construction: 2006, functionality: fully functional, BARGSTEDT LOADER BARGSTEDT TURNER (front side/back side) Nkodpjwrdg Esfx Adwet WEEKE THROUGHFEED DRILLING PROFI LINE BHH 35 WEEKE THROUGHFEED DOWEL INSERT BST 100 BARGSTEDT UNLOADER

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 0-250-15-0310, travel distance X-axis: 6,250 mm, travel distance Y-axis: 1,300 mm, rapid traverse X-axis: 80 m/min, workpiece diameter (max.): 60 mm, number of slots in tool magazine: 9, TECHNICAL DETAILS Travel Paths Travel distance X-axis: 6,250 mm Travel distance Y-axis: 1,300 mm Rapid Traverse Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 20 m/min Stroke X-axis: 8,360 mm Stroke Y-axis: 2,015 mm Main Spindle Motor Power: 9 kW Number of controlled axes: 3 Number of drilling spindles: 50 Maximum workpiece diameter: 60 mm Tool positions: 9 (8 in tool magazine 1, 1 in tool magazine 2) MACHINE DETAILS Installed total power: 18 kW Control system: HOMATIC-200 Nkjdpfxjxdw Tgo Adwet Control model: WOODWOP 7.0 Safety standard: CE marking EQUIPMENT Documentation/manual Infinitely variable speed control Automatic tool changer Vacuum pump Worktable with vacuum console supports Suction elements for workpiece holding 1 milling unit 2 drilling units (each with 25 drilling spindles) 2 cutting units Note: Tools are not included in the sale and delivery scope.

Condition: excellent (used), Year of construction: 2007, operating hours: 23,983 h, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, spindle speed (max.): 7,500 rpm, TECHNICAL DETAILS Workpiece length: 200 – 2,500 mm Workpiece width: 70 – 1,000 mm Workpiece thickness: 4 – 80 mm Power and Operation Operating power: 21 kW Software: WoodWop 4.5 Speeds Rapid traverse X-axis: 130 m/min Rapid traverse Y-axis: 80 m/min Rapid traverse Z-axis: 50 m/min Spindle Spindle speed: 1,500 – 7,500 rpm Compressed air and extraction Nksdswi Inzopfx Adwet Compressed air requirement: 7 bar Dust extraction: approx. 4,450 m³/h MACHINE DETAILS Dimensions (L x W x H): approx. 7,300 x 3,700 x 2,100 mm Weight: 5.5 t Operating hours: 23,983 h Workpiece counter: 102,199 pieces

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Nkedpfx Aewuz S Djdwst Lateral horizontal groups: yes

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 6,175 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 300 mm, total height: 300 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis HOMAG WEEKE Profi BMG 611/60/15/F/AP was manufactured in 2012. A CNC Wood Machining Centre designed for precision and efficiency in woodworking applications. Consider the opportunity to buy this HOMAG WEEKE Profi BMG 611/60/15/F/AP CNC Wood Machining Centre. Contact us for further details regarding this machine. Additional equipment • Safety devices: Laser, bumper • Torque support: Yes • Grooving saw: 90° pivoting • Vertical drilling spindles: 17 • Horizontal X drilling spindles: 2 • Horizontal Y drilling spindles: 2 • Liquid-cooled milling spindle: Yes Njdpfeyap S Isx Adwekt • Closed drag chain: Yes • Handheld terminal: Yes • HOMAG SaveScan: Yes Machine Benefits Technical Machine Benefits • High spindle speed • Comprehensive safety features • Independent z-axes: 2 • 4th axis: yes • 5th axis: 5-axis spindle • Workpiece support aids available • Machine table: console table • Number of consoles: 12 • Features: automatic table positioning, homag ap table, two stop rows Extra Information Conformity marking: CE mark Dimensions Machine Depth 6175 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 125 mm, rotational speed (max.): 24,000 rpm, Main Motor Power: 12 kW Torque support: yes 4th axis - C-axis 5th axis - Aggregate interface Tool clamping system - HSK-F63 Tool changer positions - 14 Number of exchangeable units - 3 Vertical drilling spindles - 19 Horizontal X - 4 Horizontal Y - 2 Groove saw - 90° turnable Vacuum pump - yes Safety device - safety mat Control - Homag Power Control PC st Software - Homag Woodwop 5.0 Weight - 4,500 kg CE marking - yes Nsdpfx Adeya Aimowskt Space required Length = 6580 Width = 4580 Two rows of stops Tool changing auxiliary device Workpiece support aids

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 3,780 mm, travel distance Y-axis: 1,951 mm, travel distance Z-axis: 155 mm, number of axes: 3, This 3-axis Weeke Optimat BHP Vantage 34M was manufactured in 2008. Ideal for precision CNC routing, this machine offers robust construction and reliable performance. If you are looking to get high-quality routing capabilities, consider the Weeke Optimat BHP Vantage 34M machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Work table dimensions: 3100 x 1550 mm • Max workpiece thickness: 80 mm • Design: stable gantry design with dust-protected linear guide system • Drive technology: maintenance-free motors and automatic central lubrication Nedpjyaimrjfx Adwskt Extra Information Tools Drilling Unit Specs: Spindle Speed: 1500 - 7500 rpm Drive Power: 2.7 kW Max Drill Diameter: 35 mm Milling Spindle Specs: High Spindle Speed: 1250 - 24000 rpm Max Power: up to 7.5 / 9 kW in continuous/intermittent operation (S1/S6-50%) Control Unit Control System: Modern PC-based control Hardware: Operating System: Windows XP Embedded TFT Flat Screen: 17 inches Connectivity: USB, EtherNet 10/100 MBIT RJ45 Table Matrix Table: 10'/5', with grooves for templates and vacuum suction cups Vacuum System: 500/600 m³/h, 50/60 Hz Finally, the machine offers a comprehensive software suite for CNC programming and operation, including woodWOP and 3D NC simulation capabilities.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0-250-05-2654, travel distance X-axis: 3,950 mm, travel distance Y-axis: 1,943 mm, travel distance Z-axis: 400 mm, controller model: HOMATIC-2000 IPC, No reserve price – guaranteed sale to the highest bidder! The machine is equipped with a C-axis! TECHNICAL DETAILS Travel distances X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical drilling unit X-direction Drill spindles: 16 Z-stroke: 60 mm Drilling depth: max. 38 mm Rotational direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drive: 1.5 kW Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical drilling unit Y-direction Drill spindles: 15 Z-stroke: 60 mm Drive: 1.5 kW Rotational direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drill chuck: d= 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Arrangement: Y-direction Horizontal drilling unit X-direction Drill spindles: 4 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotational direction: counterclockwise Speed: 4,800 rpm Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal drilling unit Y-direction Drill spindles: 2 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotational direction: clockwise Speed: 4,800 rpm Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Router motor Drive power: 7.5/10 kW (S1/S6 duty cycle) Speed range (stepless): 750 - 18,000 rpm Cooling: liquid recirculation cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool changer magazine Magazine positions: 30 tool positions Tool weight: max. 5 kg Tool change time: approx. 8 - 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC Nkjdpjx Sqm Ssfx Adwjt Liquid recirculation cooling: 18,000 l/min Power: 7.5 / 10 kW S1/S6 operation EQUIPMENT Integrated CNC axis (360° rotational) Torque support Main spindle (motor power 7.5 / 10 kW, HSK F63) Workpiece support system 1,500 mm Workpiece console K-table 1,500 mm Gantry extension Y-direction 120 mm Compressed air connection strip with quick couplers Extraction hood for additional router motor Router 5 kW with Hydro quick-release clamping system Left-side safety guard with door Safety tread mat 3,250 mm Control cabinet left Note: For further details regarding the machine’s equipment, please refer to the attached documents.

Condition: excellent (used), Year of construction: 2009, Weeke BHX 500 – Operator Side Right Weeke Machining Center, each with one machining support above and below Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2,500 mm Min. workpiece width: 70 mm Max. workpiece width: 1,000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pieces Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit arranged in both upper and lower machining supports, each with 21 drilling spindles (individually controllable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in both upper and lower machining supports, each with 10 spindles individually selectable via program. Each with 8 drilling spindles: in X-direction Each with 2 drilling spindles: in Y-direction N2 X-Y 90° Grooving saw unit arranged in both upper and lower machining supports for machining operations in the X-Y direction, swiveling 90°. Cutting depth: 30 mm Njdpfx Aex S Hzlodwjkt ADDITIONAL NOTE ON GROOVING SAW BLADE The saw blade width can be 8.4 mm. The cutting cross-section must not exceed 70 mm². F2-ETP-6 KW Milling unit arranged in both upper and lower machining supports, suitable for receiving shank tools. Manual tool change. Tool clamping: manual, Hydro quick-clamping system ETP 25 Rotation direction: right/left Speed: 6,000 – 18,000 rpm, stepless programmable Machining up to 3,000 mm Infeed table with automatic workpiece feeding and positioning Workpiece discharge area with cross belt conveyor and lifting arms – Workpiece length measurement in the machine – Movable operator terminal – Barcode software incl. scanner

Condition: used, machine/vehicle number: 007361, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Njdpfx Adox A Tibjwokt Total number of drilling spindles: 19 Total number of tool changer positions: 3