Used Cnc Toolroom Milling Machine for sale (64,362)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Nkedpfsyahv Ssx Ag Nju Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Table surface: 1600 x 2000 mm Njdpfx Asym Nfujg Njku Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Nkedpfx Ageym Ndws Nsu Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 ° Further information: Includes angle head 0,001° The machine can be viewed under power.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Nedpfoym Nddox Ag Nsku Type: BF 4200 Year of construction: 1998 Type of control: CNC Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Distance between the grooves: 140 mm Further information: - Heidenhain HR410 handwheel - 3D scanner, infrared - The ball screw on axes Z and Y runs clamped and supported on combined radial/axial roller bearings and radial ball bearings with 250 N/sqm stiffness. The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor Nkjdpfx Ageym Nbvo Neu - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: Nkjdpjym Nbpofx Ag Neu 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Nksdeym Nbcjpfx Ag Nju Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control unit: HEIDENHAIN TNC 426 Work area X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 - 6,300 rpm Tool holder: SK 40 M & H 3D probe (for workpiece measurement) Vertical-horizontal milling device Quill for drilling Coolant system Nkodsv Rxa Sepfx Ag Nsu Universal tilting table: 900 x 458 mm Weight: 4,000 kg Machine dimensions (LxWxH): approx. 3,900 x 2,000 x 2,000 mm æ25226

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Nkodpfx Asv Rpr Seg Nou Operating hours: 46,680 Control system: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swivel table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Nkodjvt D D Uspfx Ag Nsu Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite Njdpfx Ajquhbgog Njku - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Nkodpfx Asw Ed U Nog Nou Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, CNC tool milling machine MAHO type MH 400 E Machine No. 43072 Year of construction 1989 travel X: 400 mm Y: 250 mm Z: 375 mm table size 700 x 270 mm distance spindle nose / table max. 410 mm tool holder ISO 40 with draw pin type B spindle speed 80 - 4000 rpm. 18 steps feed speed 1-1500 mm/min. infinitely variable Rapid traverse (X, Z and Y) 2,5 m/min. Pinol shift vertical 50 mm spindle drive 2,2 kW mains connection 400 Volt, 50 Hz, 19 kVA Nkodpfx Ajh Ic Ufjg Nsu - swivelling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping - swiveling device for the vertical milling head - Splash guard cabin as table enclosure with 3 folding doors - Electrical control cabinet fixed to the machine - Interface V24 (RS 232) for data transmission - 52470 operating hours, main switch on - rigid angular table - coolant unit with coolant pump adjacent under the machine - central oil lubrication Vogel - operator's manual, electrical circuit diagram space requirement L x W x H 2250 x 1800 x 1850 mm weight approx. 1,5 ton. good condition

Condition: ready for operation (used), total height: 3,850 mm, total width: 4,190 mm, total length: 11,300 mm, controller manufacturer: Heidenhain, empty load weight: 22,000 kg, CNC indexeerfreeskop (2,5°) spaantransporteur inbegrepen Optioneel: machine kan worden uitgerust met nieuwe Heidenhain 320-besturing Longitudinal travel X-axe: 6500 mm Crosstravel Y -axe: 900 mm Travel Z-axe (Height): 1600 mm Dimensions clamping space - table: 8000 x 800 mm Power on spindle: 22/26 kW Admission in millingheadspindle (ISO): ISO 50 Nsdpfx Asxpgfvjg Njku Max speedrange: 20 > 3000 rpm

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Nksdpfju Tln Nsx Ag Nsu Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Nksdpjty A Ehsfx Ag Nou Weight 2500 kg Very good condition

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, controller model: PHILIPS, jaw width: 125 mm, Equipment: documentation/manual, No reserve price - guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period: from 08.04.26 to 16.04.26! TECHNICAL DETAILS Nsdpfx Ageyk Thuo Neku Travel X-axis: 800 mm Travel Y-axis: 400 mm Travel Z-axis: 300 mm Table dimensions: 550 x 280 mm Jaw width: 125 mm Tool holder: SK 40 MACHINE DETAILS Control: PHILIPS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 50 A Dimensions & Weight L x W x H: 3000 x 2000 x 1800 mm Machine weight: 1500 kg EQUIPMENT Table with 4 T-slots Mounted vise Documentation

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC control: SIEMENS Sinumerik 840D sl Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Center height: max. 190 mm Center distance: max. 580 mm Turning diameter: max. 200 mm Nsdpfx Ageyk Hrgj Noku Longitudinal slide travel (Z-axis): max. 450 mm Cross slide travel (X-axis): max. 160 mm Spindle bore through draw tube: 51 mm Spindle bore at front bearing: 100 mm Spindle speed: max. 5000 rpm Feed rate for X and Z axes: mm/min Rapid traverse rate X-axis: 30 m/min Rapid traverse rate Z-axis: 30 m/min Feed force X and Z: 4500 Nm Turret: 12 stations Driven tool stations: 6 stations Tool holder: cylindrical, VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Electrical connection: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis (chuck position) and C1-axis for tool turret - 3-jaw power chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - Hydraulic hollow chucking device AUTOGRIP - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 of which are driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measuring system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece remaining run-time display and part counter as large display on machine enclosure - Electrical cabinet cooling unit - 9716 total operating hours (main switch on), of which 3322 spindle hours, as read from the meter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4500 x 2600 x 2050 mm Basic machine footprint (L x W x H): 2900 x 2150 x 2050 mm (3200 kg) Chip conveyor footprint (L x W x H): 3350 x 850 x 1650 mm (500 kg) Weight: approx. 4 tons Very good condition

Condition: ready for operation (used), total height: 3,870 mm, total width: 3,417 mm, total length: 10,994 mm, controller manufacturer: Heidenhain, empty load weight: 23,500 kg, 4 assen gelijktijdig + B- en C-as Nkjdpfxjymg Sfj Ag Neu hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) centraal smeersysteem Gereedschapswisselaar met 40 posities Spaantransportband Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Power on spindle: 36 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 40 > 3000 rpm

Condition: ready for operation (used), total height: 3,870 mm, total width: 3,417 mm, total length: 10,994 mm, controller manufacturer: Heidenhain TNC 530, empty load weight: 23,500 kg, FBF-S 6000 4-assige gelijktijdige X/Y/Z + draaitafel hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) dia 1000 mm CNC universele freeskop, indexering elke 2 x 2,5° Renishaw meetsysteem centraal smeersysteem Gereedschapswisselaar met 40 posities T-sleuftafels Stolle inbegrepen 7000 x 1500 mm Spaantransportband Alle documentatie, CE-certificaat, parameters etc. slechts +- 500 werkuren vanwege een faillissement vanwege een verloren contract van de Franse nationale spoorwegen Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Power on spindle: 30 kW Admission in millingheadspindle (ISO): ISO 50 Nkjdpfx Ageymg Sls Nsu Max speedrange: 40 > 4000 rpm

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Koeling door spindel Het werkgebied kan in twee secties worden verdeeld 2 magnetische tafels Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Universal (2x 360°): ISO 50 Boring head (1 x90°): 19 kW Njdpfx Aowxz D Ueg Njku

Condition: ready for operation (used), total height: 3,580 mm, total width: 3,452 mm, total length: 10,345 mm, controller manufacturer: Heidenhain, empty load weight: 23,500 kg, 4 assen gelijktijdig hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) Renishaw meetsysteem centraal smeersysteem Nkjdpfxjymg Srj Ag Nsu Gereedschapswisselaar met 24 posities T-sleuftafels Stolle inbegrepen 7000 x 1500 mm Spaantransportband Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Dimensions clamping space - table: 7000 x 1500 mm Power on spindle: 30 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 40 > 3000 rpm

Condition: ready for operation (used), controller manufacturer: Heidenhain, empty load weight: 18,500 kg, total length: 6,450 mm, total width: 3,700 mm, total height: 3,200 mm, CNC indexerende freeskop inclusief spaantransportband Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 1600 mm Dimensions clamping space- table: 3360 x 1000 mm Power on spindle: 18 kW Type of millinghead: ISO 50 Njdpfxsymg Sxs Ag Njku Max speedrange: 15 > 2000 rpm

Year of construction: 2025, condition: new, Multifunctional CNC drilling and milling center for all types of profiles. Suitable for processing aluminum and PVC profiles for doors and windows. The multifunctional CNC (Computer Numerical Control) drilling and milling center is a high-tech machine designed to perform a wide range of metalworking operations. This type of equipment combines functions such as drilling, milling, reaming, tapping, and sometimes even turning, providing high precision and efficiency in machining various materials including metals, alloys, wood, and PVC. Nkedpfsw T Sldox Ag Nsu Key Features and Advantages - High precision and repeatability: Thanks to digital control, CNC centers can perform complex, multi-stage operations with micron-level accuracy. - Versatility: Multifunctional centers allow rapid reconfiguration for different operations and can machine parts of different sizes and shapes. - Automation: These machines are automated, which significantly reduces the need for manual intervention and the risk of errors. - Reduced production costs: By consolidating multiple operations into a single machine, equipment, time, and labor costs are optimized. - Capability to process complex shapes: CNC centers can machine intricate geometrical parts that would be difficult or impossible to achieve with manual machines. Main Components - Control system (CNC): Manages all movements and operations of the machine according to the pre-set program. - Worktable and spindle: The area where the workpiece is mounted, and the spindle that drives the tool. - Tool magazine: Stores and manages the tools for automatic changes during operation. - Cooling and lubrication system: Maintains optimal working temperature and protects both tools and material. Applications Multifunctional CNC centers are used in various industries, including automotive engineering, aviation, electronics, and mechanical engineering, wherever high-precision machining of parts and complex geometrical shapes is required. These machines deliver high productivity, reduced setup time, and significantly improved quality control, making them indispensable for modern manufacturing processes. Brand new!!!

Condition: excellent (used), Year of construction: 2020, Sub-spindle, Y-axis, C-axis FANUC 31i B5-NT-SmartX control Turning diameter max 305mm Turning length -870 mm Main-spindle speeds 6'000 rpm Sub-spindle speeds 6'000 rpm Milling head B-axis +/- 95 ° Tool changer with 72 positions Turret head: 24 positions with 12 driven positions Nksdpfx Aeyla Spjg Nju Tool presetting device Workpiece pick-up attachement Tool breakage control device Bar loader Misc. accessories MARCELS MASCHINEN CH