Used Coating Line for sale (17,619)

Condition: used, Year of construction: 2013, Bottling Filling Line for Oil PET Year: 1995 | 2013 Speed: 6,000 bph on 1 L Cap: 29/21 mm Ijdpfxeq Ttuqo Ac Aeik Preform feeder Compressor for chiller moulds MTA Nr.1 Blower Kosme KSB 3000 Nr.2 Blower Kosme KSB 3000 Air conveyors Kosme Filling/capping monoblock ICS – 6,000 L/h Labeller ICS cold glue Shrink wrapper SMIPACK Shrink pallet wrapper Zlatorog KAESER high-pressure compressor Code: NP 537

Condition: used, functionality: fully functional, Year of construction: 2018, Sandwich panel line, roof 30, 50, 80, 100 mm, wall 50, 80 mm, facade 50, 100 mm Isdjxcinaspfx Ac Ajik

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total width: 1,800 mm, One Station Mono Extruder Min: 600mm Max: 1800mm coating; Turret ALU Foil Unit unwinder; 2 Corona non-stop winding and unwinding lines; Revised setting Iisdpfsxmh Iaox Ac Aek

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 50003, input voltage: 380 V, input current: 53 A, The line was used very little, 2-3 hours per shift. It had been idle for the last year due to a change in the packaging process. The decision was made to sell it. If you have any questions, I will be happy to answer them. Iedpfxexp D D Ns Ac Aeik

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, Rondo Doge Bread & Pastry Line. Year of production 2006. Total length 16.7m (Machine 11.55m + tables 5.15m) Width 1.80m (working width 0.7m) Height to hopper 3m. Total height 4.05m Efficiency: 600kg per hour - from 2500 pcs to 7500 pcs of products per hour for square, triangular and flat products Ability to produce a very thin continuous line of dough - from 1 mm to 24.5 mm. - Dough portioning hopper - 3 sprinklers - 2-roll dough extruder - calibrator - satellite sheeter - flour sprinkler - cross roller - longitudinal plate assembly - dough folders - pneumatic guillotine Machine connected to the power supply and ready to work. Iedpjwn Hhqjfx Ac Asik

Condition: ready for operation (used), total height: 1,350 mm, total length: 2,680 mm, total width: 2,350 mm, throat depth: 500 mm, empty load weight: 1,800 kg, Volledig automatische lintzaag met bundelklem en automatische invoer CNC gestuurde hoekpositionering Iiedexbui Tepfx Ac Ask werkstukbreedte in bundelklem: 0-300 mm werkstukhoogte in bundelklem: 5-300 mm enkele materiaaltoevoerlengte: 0-600 mm herhaalde materiaaltoevoerlengte: 0-9999 mm maximale snijcapaciteit (90°, rond): 320 mm maximale snijcapaciteit (90°, rechthoek): 500 x 300 mm rechter versteksnede (45°, rond): 320 mm rechter versteksnede (45°, rechthoek): 310 x 310 mm rechter versteksnede (30°, rond): 200 mm rechter versteksnede (30°, rechthoek): 200 x 180 mm linker versteksnede (45°, rond): 320 mm linker versteksnede (45°, rechthoek): 300 x 230 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Length of band saw: 4200 x 34 x 1.1 mm

Condition: ready for operation (used), Dry sorting line (17 pockets) Manufacturer - SATEKO (Valmet) modified - 1996 (7pcs) & 2023 (3pcs) Total number of pockets - 17 pcs Separate rake conveyor on top. Drop from above Latest update 3 pockets in 2023 (Biocone) Iijdpfx Aoxmr Rrjc Ask Main layout attached

Condition: used, Year of construction: 1990, Manufacturer: SALICO S.P.A. Year: 1990 Thicknesses: 3-13.5mm Coil capacity: 25t Coil width:320-1250mm Direction: Left-Right Sizes of line: 17x13m Maximum external diameter: 2000mm Minimum external diameter: 700mm Minimum internal hole of coil:500mm Maximum internal hole of coils: 600mm Knife diameters: Max 460, Min 410mm Absolute number of cuts 15 Iedjurlakepfx Ac Aoik Number of cuts with maximum thcikness 13.5mm: 3 cuts for hard material, 5 cuts for mild material.

Condition: like new (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, water tank capacity: 10,000 l, Complete mineral water and soft drink production plant for sale, available with brands, staff, or standalone. The production line features a mixed configuration, allowing both glass and PET bottle products to be manufactured on the same line. Iodpfx Aexm Rmxjc Ajik The machine list is available in the documents along with information about the company. The machines have seen little use since 2019 and remain in good condition.

Condition: excellent (used), Year of construction: 2015, Good condition pellet making line OGM 1,5. Capacity for wood about 1 tone/hour. For straw: 1,5 tones/hour. Full line consist of: - Hammer mill 55kw - Cyclone -Cyclone with a fan 11 kw - Screw conveyor. - Silo of material. Iedpfx Aou Ttkxsc Aeik - materialial mixer to pellet mill - pellet press OGM 1,5 75 kw with new ring die for straw. - elevator - pellet coller.

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Iodshgbarepfx Ac Aeik Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, Year of construction: 2025, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, Assembly is not required - ready to use immediately. Specifications: Working length: 8040mm Working width: 1300mm Ijdpfxjgmhxaj Ac Aeik Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.7mm/0.8mm / Al - 1.00mm Bending angle: 135° Machine weight: 3400kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic fighting and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & WiFi communication Offset angle adjustment SUMMER DISCOUNT

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Iisdpeg Atrvsfx Ac Aok

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Isdpsd Ecncjfx Ac Asik Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Weight: 485 g

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Isdpfx Aottlfkjc Aeik Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: Iiodpfx Acowzl Hxo Ajk After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: refurbished (used), ROLLFORMING LINE Iiodpeg Rkv Eofx Ac Aok

Condition: used, Year of construction: 2006, functionality: fully functional, Complete briquetting line 2 x RUF 330. Boiler room, drum dryer, conveyors. Iodpjxazhtsfx Ac Aoik

Condition: new, New rotary lobe pump, rotary pump with electric gear motor Hy-Line Rotary Lobe Pump, industrial pump Hygienic rotary lobe pumps with stainless steel multi-lobe rotor Manufacturer JABSCO-by-Packo HP Hy-Line Type: LH76R B012& (serial no. 44927) Year of construction 2018 Delivery rate: approx. 73 m³/h Isdpfsitv Rljx Ac Aoik Delivery rate per revolution: 3 liters/rev Delivery rate at 407 rpm gearbox speed: 1221 liters/min. Delivery pressure: max. 5 bar Rotor speed: max. 600 rpm. Pump inlet connection diameter: 152 mm Pump outlet connection diameter: 127 mm Weight of the pump unit: 165 kg SIEMENS electric motor with gearbox Type: RX 97 DRN180M4/TF Mains connection: 400 Volt, 50/60 Hz Drive power: 18.5 kW Motor speed: 1781 rpm. (specified at 60 Hz) Gearbox speed: 489 rpm. (specification at 60Hz) Motor speed: 1480 rpm. (at 50Hz) Gearbox speed: 407 rpm. (at 50Hz) Gear ratio: 3.64 Output torque: 360 Nm very good condition - as good as new - unused from stock Application: Conveying of: Polymers paper coatings Soaps and surfactants Paints and dyes Pharmaceutical applications Food applications 2 pieces available Price per piece

Condition: new, functionality: unexamined, machine/vehicle number: PST400, Complete multi-stage industrial washing system with stainless steel tank structure, ultrasonic cleaning, oil separation, demineralized and ultrademi water washing, hot air drying, and integrated filtration. Equipped with digital temperature control, automated regeneration system, and safety containment basin. Ideal for precision cleaning applications in surface treatment. Ijdpexfrg Rofx Ac Asik

Condition: ready for operation (used), Semi automatic sorting line with 1 waste pocket and two size pockets. Line is equipped with metal detector Mesutronic. Sorting process is controlled by operator. Fully working line with hydraulic station and electrical cabinet included. Video of working process available by request. Working diameters 100-500 mm Iiodpfx Aev Nwrwjc Aok

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time Iodewfgbrepfx Ac Aoik • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Iiodpotzmifefx Ac Ask Capacity 2700- 4500 kg /h of peeled onion

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running Iisdpfsvw Egrex Ac Aek In excellent condition

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Iiodpfx Acjrrglyj Ask Capacity 2700- 4500 kg /h of peeled onion