Used Cobra 40 10 Wagner for sale (95)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total width: 2,600 mm, total length: 4,000 mm, 5 Pre-heating - WAGNER Powder Spray Booth Wagner - cleaning Wanzer S-PTG-004 Pre-heating - before spray booth - and after cleaning and Gel furnace built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Ask the drawing S-PTG-004 built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Iiedjvy Ebhspfx Ac Aek Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Gel oven: Only infrared radiators from Excelitas Nobelight (formerly Heraeus Nobelight) 400 V, 15000 W, heated length = 2,900 mm with a quantity of 12 units are installed here. Additional heating by metal tube heaters is not used here. Alignment oven Only metal tube radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 1 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 2 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here.

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 1700 mm Measurements height 2240 mm Machine weight 3500 kg Measurements depth 2100 mm Control Unit Brand SIEMENS Model SINUMERIK 828D Main Drive Spindle speed range 80 – 10000 rpm Tool taper SK 40 Movement X-Axis Movement 600 mm X-Axis Feed Force 10000 mm/min X-Axis Rapid Traverse 24000 mm/min Y-Axis Movement 400 mm Iiedsx D Nu Nopfx Ac Aok Y-Axis Feed Force 10000 mm/min Y-Axis Rapid Traverse 24000 mm/min Z-Axis Movement 450 mm Z-Axis Feed Force 10000 mm/min Z-Axis Rapid Traverse 20000 mm/min Additional Equipment Rigid cast-iron frame construction Linear guides on all three axes Automatic double-arm tool changer (16 stations) Complete coolant system Central automatic lubrication Air blast system for spindle cleaning Machine enclosure with doors Machine and signal lights Documentation in English CE-certified This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC machining center Wagner WMC 1800 (2013) Iisdjw S Hrvjpfx Ac Ajk Manufacturer: Wagner Model: WMC 1800 Year of manufacture: 2013 Siemens 828 control Condition: good, used, currently in production X-travel: 1800 mm Y-travel: 900 mm Z-travel: 700 mm Tool holder: SK40 Through-spindle coolant (IKZ) 25 bar with belt filter system Tool measuring system Handwheel Without tools

Condition: used, Weinig / Wagner one-handed hydraulic grease gun with manometer for hydraulic clamps. Manufacturer Part No.: 00309102 Ijdsxu H Tdspfx Ac Aoik

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm Iisdpfx Aetq I Rqsc Ask weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2009, WAGNER/TRENNJÄGER PMC 12 S Longitudinal Circular Saw Iisdjx H R Hbjpfx Ac Ask Year of manufacture: 2009 Machine number: 200 Equipment: - Round material up to 360 mm - Square material 300 mm x 300 mm - Flat material 1,000 mm x 150 mm - For further data, see brochure - Additional: 2nd saw blade, diameter 910 mm Scope of delivery includes: - Operating manual/documentation For details on features, operation, transport, machine overview, and manufacturer’s brochure – please see PDF. Image, content, and specifications are provided without guarantee, therefore not binding. All other accessories shown in the photos and video are not included in the scope of delivery and thus are not part of this sale. The scope of delivery only includes the accessories expressly listed here, in the order confirmation, and on the invoice. FCA (Free Carrier, loaded on truck) D-04643 Geithain Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon conclusion of sale.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: F-00334, controller manufacturer: Siemens, controller model: SINUMERIK 802C, MACHINE DETAILS Control brand: SIEMENS Iiedpfx Asx D T A Dec Ajk Control model: SINUMERIK 802C

Year of construction: 2002, condition: ready for operation (used), General Data Measurements height 2200 mm Main Drive Spindle Speed 1200 RPM Spindle motor power 9 kW Control Unit Brand SIEMENS Dimensions Machine Length 4660 mm This WAGNER FCL 3280 was manufactured in 2002. It features a spindle bore of 134 mm and a spindle speed range up to 1200 rpm. The machine supports a maximum workpiece weight of 1800 kg with tailstock and steady rest. It offers rapid traverse rates of 10,000 mm/min for both Z and X axes. If you are looking to get high-quality turning capabilities, consider the WAGNER FCL 3280 machine we have for sale. Contact us for more information. Iiedpfex D Dpnjx Ac Ajk Application Types Turning

Condition: used, Year of construction: 1986, total height: 1,900 mm, total length: 2,300 mm, total width: 2,200 mm, Empty weight: 2.000 kg Iodow E If Eopfx Ac Aeik - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 86721 - Drive system: Conventional - Power [kW]: 1.5 - X-axis travel [mm]: 700 - Y-axis travel [mm]: 400 - Z-axis travel [mm]: 400 - Table width [mm]: 900 - Table depth [mm]: 350 - Magnet width [mm]: 350 - Magnet depth [mm]: 700 - Max. grinding wheel diameter [mm]: 250 - Control: Conventional - Motor power: 1.5kW - Transport dimensions: 2300mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 610 mm, turning length: 2,000 mm, spindle bore: 100 mm, travel distance X-axis: 310 mm, Equipment: documentation/manual, In good condition. Equipped with steadies. Spindle bore 100 mm. Machining diameter up to 610 mm, length up to 2000 mm. Siemens control. Features TurnPlus. Max. turning diameter: 546 mm Max. turning diameter over bed: 610 mm Distance between centers: 2000 mm CNC type: X-axis: 310 mm Z-axis: 2000 mm Spindle taper: Spindle bore: 106 mm Iisdpox Dhkvefx Ac Ajk Spindle speed: 1800 rpm Spindle motor power: 15 kW Tailstock: yes Bar feeder: no ----- Length x width x height: 4500.0 × 1620.0 × 1950.0 mm Weight: 4540 kg Technical condition: as is

Condition: good (used), Year of construction: 2016, machine/vehicle number: 24-16-0009, Offer 25391 Technical Data: - Automatic cutting cycle, hydraulic lifting/lowering of the saw frame - Manual miter adjustment with manual clamping - Saw blade dimensions: 6040 x 41 x 1.3 mm - Cutting speed, steplessly adjustable: 20 – 90 m/min - Cutting pressure regulation, stepless: 10 – 15 bar - Lowering speed: 0 – 300 mm/min - Cutting range: 30° – 90° - at 90° round: 500 mm - rectangular/flat: 620 x 450 mm - at 45° round: 450 mm Iiodpfjx Eku Njx Ac Ask - square: 430 x 430 mm - at 30° square: 310 x 310 mm - Hydraulic material clamping - Coolant system - Discharge roller conveyor with length stop, 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 4 kW - Required space approx. W 1700 x H 1700 x D 3000 mm - Weight approx. 1600 kg

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Iijdpov Ed Ukofx Ac Aok Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: used, Year of construction: 1980, functionality: limited functionality, WAGNER MECHANICAL ECCENTRIC PRESS — 500 TON — DOUBLE COLUMN Brand: Wagner Model: 500 ton Eccentric Press Year: 1980 Mechanical overhaul: 2010 Electrical panel: overhauled in 2011 Condition: partially operational Type: double column – eccentric system Strokes/min: 0–30 Slide stroke: 300 mm Slide adjustment: 140 mm Clearance at TDC: 1100 mm Front column opening: 1850 mm Side window: 800 mm Bolster: 1800 × 1000 mm Ram: 1800 × 1000 mm Number of pressure points: 2 Ram guides: 8 Guards: front and rear Machine dimensions: 3000 × 2000 × 6000 mm Iedpfx Acox A Akzj Ajik Weight: 50 tons Foundation required: 100 cm Accessories: ELMEA L500 power supply feeder Status: available for inspection

Year of construction: 2011, condition: ready for operation (used), overall weight: 7,300 kg, total height: 3,245 mm, spindle motor power: 5,500 W, product length (max.): 3,080 mm, General Data Machine weight 7300 kg Measurements height 3245 mm Iijdpfx Aox D Ilasc Aok Dimensions Machine Length 3080 mm Main Drive Spindle motor power 5.5 kW This WAGNER PRC 60 was manufactured in 2011. It features a drilling capacity in steel of 60 mm, a table size of 630 × 800 mm, and a spindle taper of MK 5. The machine includes a spindle travel of 400 mm and a reach of 400 – 2000 mm. With a column diameter of 450 mm and a vertical arm adjustment of 800 mm, it's robust and versatile. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: excellent (used), functionality: fully functional, Complete equipment for an industrial paint shop: - dry wall with extraction system and filters. The paint shop was used for painting window frames. Iodpfxjxmr Tyj Ac Asik

Condition: used, BAG PACKING MACHINE Consists of: Iiodpfsu Nu Hvjx Ac Ajk Weighing machine: make Wagner type WAMA-SP Compact, year 1995 Conveyor belt Bag emptying machine: DCE Sintamatic Bag sealing machine: Toss type 780 year 2002 *

Condition: good (used), Year of construction: 2017, machine/vehicle number: N 16601, Offer 25387 Technical Data: - Drilling capacity in steel: 60 mm - Drill spindle taper: MT 5 - Drill spindle stroke: 300 mm - Digital positioning display for stroke and position - Radius (throat): 1600 mm - Column diameter: 350 mm Iodox Ei D Aepfx Ac Ajik - Max. distance spindle – base plate: 350 – 1650 mm - Vertical travel of the arm: 1250 mm - Spindle speeds, stepless: 30 – 1500 rpm - Feeds, stepless: 1 – 600 mm/rev - Drive: 400 V / 8.9 kVA - 2 x cube tables - Coolant system - Required floor space approx.: W 2490 x H 2980 x D 1060 mm - Weight approx.: 3800 kg

Condition: good (used), functionality: fully functional, 2x Powder supply units (Manufacturer: Wagner) 2x Powder control units & spray guns (Manufacturer: Wagner) 1x Curing oven 1x Complete overhead rail system General information about the powder coating plant: 2x Powder supply units (Manufacturer: Wagner): without powder recovery, resulting in short changeover times Curing oven: Oven dimensions (internal): Length: 6500 mm Width: 2400 mm Height: 1400 mm Maximum component weight: 750 kg Retrofitted to forced-air gas burner (approx. 85kW/h) Rail system: The system was completely renewed in 2013 Load per suspension point: 200 kg Iiodjxhcx Aepfx Ac Aek Load per suspension traverse: 400 kg Corresponding technical drawing available

Condition: used, Year of construction: 1999, band width 221 mm Ijdpfxowf Et Hj Ac Aoik length in total 1.000 mm weight of the machine ca. 300 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2021, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 3400 mm Measurements height 2100 mm Machine weight 5000 kg Control Unit Brand SIEMENS Model SINUMERIK 8287D Main Drive Spindle speed range 20 – 2200 Spindle motor power 15 kW Spindle bore 81 mm Number of axis 2 Movement Iedpfx Asx D Nuvec Ajik X-Axis Movement 280 mm Z-Axis Movement 1435 mm Workpiece Workpiece drm over bed 500 mm Workpiece drm over support 260 mm Tail Stock Pinol diameter 75 mm Pinol tool taper MK 5 This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us. Application Types Turning

Condition: not inspected (used), I sell the Airless high pressure set of painting devices without guns. 2 stk. high pressure pump Kovofiniš vyza 4V ratio 33:1, output pressure 9-25 MPa 1ks. high pressure pump Wagner 600 Airless Iiodped Nnb Rofx Ac Ask 2ks. high pressure tank Kovofiniš TZ60M und TZ100M 1ks. Tank Kovofiniš. On stock. Sellable immediately. Total price 1000 Euro.

Condition: used, Year of construction: 1995, Technical details: x-travel: 500 mm y-travel: 200 mm z-travel: 300 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 45 ° Iedpfxou Ndfue Ac Aeik range of revolution per miute: 45...2000 U/min headstock: dist. table - spindle center: max. 300 mm distance spindle nose and table: max. 300 mm feed:: 16...800 / 18 step mm/min table surface area: 1000 x 165 mm table swivelling to both sides: ja Grad control voltage: 380 V total power requirement: 4,6 kW machine weight approx.: 1540 kg dimension machine xH: 1,5 x 1,5 x 1,6 m The milling beam is slide adjustable with 580mm. Throat min. / max. 250/800mm *

Year of construction: 2007, condition: ready for operation (used), General Data Measurements width 1470 mm Measurements depth 3230 mm Measurements height 1730 mm Machine weight 3000 kg Control Unit Brand SIEMENS Model SINUMERIK 802Ç Main Drive Spindle motor power 7.5 kW Number of axis 2 Movement X-Axis Movement 295 Z-Axis Movement 1435 This WAGNER WDE 500 was manufactured in 2007. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Consider the opportunity to buy this WAGNER WDE 500 horizontal turning machine. Contact us for more information. Isdpfx Acex D Rfio Aeik Application Types Turning

Condition: used, Technical details: pressure: 200 t Iisdeu Nfrpopfx Ac Ask stroke: ca. 200mm mm table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. *

Year of construction: 2012, condition: ready for operation (used), Control Unit Brand SIEMENS Model 802-C Main Drive Number of axis 2 Additional Equipment Complete electrical equipment 400 V / 50 Hz RS 232 interface Electronic handwheels with increment preselection Mechanical spindle engagement lever Right and left rotation Pilot lever for feed with detent function Rapid traverse override as a push button Movable control panel Constant cutting speed Bed guideways induction-hardened, ground, and Turcite-coated This WAGNER WDE 500 was manufactured in 2012. A robust horizontal turning machine featuring a Siemens 802-C control interface, it includes a three-jaw lathe chuck, quick-change tool post, and manual tailstock. The machine is equipped with a complete coolant system and an enclosure with safety features. If you are looking to get high-quality turning capabilities consider the WAGNER WDE 500 machine we have for sale. Contact us for more information. Application Types Turning Ijdex D Snxopfx Ac Asik