Used Column Drilling Machine for sale (93,304)

Condition: used, drilling capacity steel/GG: 15 mm spindle taper: 1 MK arm length: 300 mm table size: 210 x 300 mm spindle sleeve stroke: 110 mm Ksdpfx Aajvxpp Hjbsnc spindle turning speed range: 200 - 3000 rpm engine: 380 V, 1,1 kW space needed: 850 x 420 x 1860 mm weight: 220 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Technical Data: - Drilling capacity in steel ST 60 40 mm - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm Kodpfx Aowncaisabsnc - Height adjustable via rack with hand crank - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Condition: good (used), Column Drilling Machine ALZMETALL AB3 ESB Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Kjdpfxji Tvv Aj Aabenc Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 234238, Sale only within EU member states! No private sales. MAE can be inspected on site. Any warranty rights are excluded. Kedpfjw Ilh Uex Aabsnc We do not assume any liability for the correctness of the technical data and year of manufacture, for the completeness of accessories and tooling equipment, nor for compliance with all safety and environmental protection requirements stated in the accident prevention regulations.

Condition: new, Year of construction: 2025, Tapping device OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Tapping capacity max. - R1 M30x3.5 - R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Projection (mm) 300 Column diameter (mm) 140 Usable table surface (W x D) (mm) 590 x 450 Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with toothed rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor three-phase current 400V with frequency converter (kW) 4.0 Stepless spindle speeds R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Manual feed Weight (kg) 400 Optional drilling package 6 (€ 890.00 plus VAT) - Vice [felix] 2.0 150 - Taper mandrel MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) Free delivery in Germany including packaging! NOT THE RIGHT MACHINE? Knjdpjd Su Agsfx Aabsc WE ALSO STOCK OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: used, Year of construction: 1971, drilling capacity steel/GG: 23 mm spindle taper: 3 MK Knedpfsrz Nqasx Aabec arm length: 275 mm table size: 300 x 400 mm spindle sleeve stroke: 90 mm spindle turning speed range: 100 - 1180 rpm carriages: 0,1/0,6/0,25 mm engine: 380 V, 1,25/2,15 kW space needed: 850 x 400 x 1770 mm weight: 280 kg

Condition: good (used), Year of construction: 2000, Offer 25273 Technical specifications: Kjdew Hx Iaepfx Aabjnc - Drilling capacity in steel ST 60: 30 mm - Drill spindle mount: MT 3 - Drill spindle stroke: 125 mm - Infinitely variable spindle speeds: 80 - 3200 rpm - Tapping capability, right/left rotation up to M20 - Throat depth: 260 mm - Max. distance table – spindle: 825 mm - Table with 2 T-slots: 500 × 360 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.8 / 1.5 kW - Required space approx.: W 500 × H 1900 × D 950 mm - Weight approx.: 230 kg

Condition: new, Year of construction: 2025, Thread cutting device Free-cutting device Programmable drilling depth cut-off Drilling depth and speed display - digital Thread cutting device M30 (pitch-dependent) Opt. R1: Stepless spindle speeds with countershaft, speed range 100-2000 rpm Opt. R2: Stepless spindle speeds with countershaft, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm throat depth 300 mm Usable table surface (swiveling) 590 x 450 mm Feed rate 0-300 mm/min stepless Table height adjustment with toothed rack Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor rotary current 400 V pole-changing 1.5/3.0 kW Weight 420 kg Option drilling package no. 6: taper arbor B18/ Mk 4, quick-action drill chuck B18/ 3-16 mm, machine vice no. 2 -140 and T-slot screws, 890.00 EUR Option: automatic spindle stop with drill spindle top, 420,00 EUR Option: chip breaking module 420,00 EUR Delivery: free domicile incl. packaging (Germany only) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! Knedpfx Aaed H Rh Rsbec FLOTT SUPPORT PARTNER

Condition: ready for operation (used), Drilling capacity steel/GG: approx. 25 mm Spindle mount: 2 MK Thrust: 300 mm Table size: 305 x 380 mm Quill stroke: 115 mm Spindle speeds: 200 - 1200 rpm Drive motor: 380 V, 1/1.5 kW Knsdpfxsv Du Raj Aabec Space required: 800 x 400 x 1800 mm Weight: approx. 280 kg

Year of construction: 1995, condition: good (used), Offer 22054 Technical data: - Drilling capacity - in steel 15 mm - in aluminum 18 mm - Drilling spindle holder MK 2 - drilling depth 70 mm - throat spindle / column 180 mm - drilling spindle speed 80 - 4000 rpm - drive 400 V 0,45 / 0,75 kW - height adjustable drilling table 280 x 240 mm - distance drilling spindle / table approx. 360 mm Knodpfx Aokt N Nleabec - distance drilling spindle / base plate approx. 410 mm - space requirement approx. W 280 x H 1700 x D 600 mm - weight approx. 85 kg - with : - quick-action drill chuck 1 - 13 mm - machine vice - div. burned HSS drill bits 5 - 15 mm

Condition: new, Year of construction: 2025, NEW - ex works Drilling depth and speed display - digital with background lighting Thread cutting capacity M30 (depending on pitch) Optional: R1 spindle speeds with gear ratio, infinitely variable, speed range 100-2000 rpm Optional: R2 spindle speeds with gear ratio, infinitely variable, speed range 70-1400 rpm Kjdpod H Rhnofx Aabonc Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Thrust 300 mm Usable table surface (swivelling) 590 x 450 mm Manual feed Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole-changing 1.5/3.0 kW Weight 420 kg 3 year guarantee FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1985, machine/vehicle number: 0125153, Offer 24280 Technical data: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm Knedpfx Ast Hr Svoabec - Drill spindle holder MK 3 - Drill spindle stroke 175 mm - Drill spindle speed infinitely variable 60 - 1600 rpm - 3 feeds 0.1; 0.16; 0.25 mm/rev - throat depth 290 mm - max distance drill spindle - table / base plate 790 / 1210 mm - Table with 2 T-slots 570 x 475 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.8 kW - Space requirement approx. W 600 x H 1950 x D 980 mm - Weight approx. 450 kg - with: - Emergency stop button - emergency stop button - lighting - Machine vice - 15 HSS drill bits 8 to 20 mm

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1438-135-1203, Offer 25251 Technical Data: Kedpfxsw Id Nds Aabenc - Drilling capacity in steel ST 60: 45 mm - Drilling capability in steel ST 60: 55 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 200 mm - Infinitely variable spindle speeds: 60 – 1600 rpm - Forward/reverse rotation - 3 feeds with electric magnetic clutch: 0.1; 0.16; 0.25 mm/rev - Throat depth: 360 mm - Max. distance spindle – table / base plate: 775 / 1255 mm - Table with 2 T-slots: 630 x 540 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 2.7 / 4.0 kW - Space required approx.: W 800 x H 2100 x D 980 mm - Weight approx.: 750 kg - Included: - Machine vice - Quick-action drill chuck 1 - 13 mm - Emergency stop button - Lighting

Condition: good (used), Year of construction: 1985, machine/vehicle number: 4888, Offer 25234 Technical Data: Knsdpfx Aewylvqoaboc - Drilling capacity in steel ST 60: 32 mm - Maximum drilling diameter in steel ST 60: 40 mm - Long spindle MK 3 - Drill spindle speeds steplessly adjustable - Range 1: 160 – 1125 rpm - Range 2: 320 – 2250 rpm - Drill spindle stroke: 120 mm - Feeds: 0.1 + 0.2 mm/rev - Throat depth: 293 mm - Column diameter: 115 mm - Table size: 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vice - 10 pcs. HSS drill bits 10 – 25 mm - Required space approx.: W 500 x H 1750 x D 900 mm - Weight approx.: 270 kg

Condition: good (used), Year of construction: 1988, machine/vehicle number: 251500126, Offer 24156 Technical data: - Drilling capacity in steel ST 60 18 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - Drill spindle speeds approx. 340 - 2400 rpm - Right and left rotation - Projection 250 mm - Max. distance table - drill spindle 670 mm Knsdpfxevxhdco Aabsc - Table with 2 T-slots 320 x 280 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.75 kW - Space requirement approx. W 500 x H 1750 x D 750 mm - Weight approx. 180 kg - with: - Keyless drill chuck

Condition: good (used), Year of construction: 2001, machine/vehicle number: 2083-949, Offer 24470 Technical Data: - Drilling capacity in steel ST 60: 32 mm - Maximum drilling capacity in steel ST 60: 35 mm - Thread cutting device - Drill spindle taper: MT 4 - Drill spindle stroke: 160 mm - 8 spindle speeds: 75 – 2100 rpm - 3 feed rates: 0.1 / 0.2 / 0.3 mm/rev - Throat depth: 280 mm - Max. distance table to drill spindle: 750 mm - Max. distance machined base plate to drill spindle: 1210 mm - Table with 2 T-slots: 420 x 400 mm - Height adjustable via rack and pinion with hand crank - Table tilts left and right - Drive: 400 V / 0.7 / 1.3 kW - Required space approx.: W 600 x H 2300 x D 950 mm - Weight approx.: 320 kg Knsdpfx Aaew Ad E Aebec - Including: thread cutting device, coolant system - Keyless drill chuck 1-13 mm - Lighting

Year of construction: 1970, condition: good (used), machine/vehicle number: Unbekannt, QUOTE Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle mounting MK 3-long spindle - drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable approx. 140 - 1600 rpm - 3 feeds 0,1 ; 0,2 ; 0,3 mm/rev - throat 290 mm - max distance table - drilling spindle 620 mm - rotary table with 2 T-slots 450 mm - Height adjustable via toothed rack with hand crank Kodpfx Aaohglvksbenc - Coolant device - Drive 380 V / 0,9 / 1,3 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg

Condition: good (used), Year of construction: 1998, Offer 25232 Technical Specifications: - Drilling capacity in steel ST 60: 32 mm - Drilling performance in steel ST 60: 46 mm - Thread cutting unit up to: M 30 - Drill spindle taper: MT 4 Kjdpowyupysfx Aabjnc - Drill spindle stroke: 160 mm - Throat depth: 300 mm - Table with 2 T-slots: 615 x 430 mm - Column diameter: 145 mm - Power feeds – electromagnetic: 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Infinitely variable spindle speeds with digital display: 80 – 4000 rpm - Drive: 400 V / 1.4 / 2.2 kW - Electric foot switch - Lighting - Machine vice - Required space approx.: W 650 x H 2100 x D 1100 mm - Weight approx.: 450 kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 16924, Offer 22090 Knsdpotz T Dvofx Aabsc Technical data: - Drilling capacity in steel ST 60 20 mm - Drill spindle holder MK 2 - Drill spindle stroke 120 mm - 4 drill spindle speeds 400 - 2000 rpm - throat depth 250 mm - Max. distance table - drill spindle 720 mm - Table with 2 T-slots 440 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive 380 V / 0.6 kW - Space requirement approx. W 550 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - Drill chuck 3 - 12 mm

Condition: good (used), Year of construction: 1988, machine/vehicle number: 1669-110-1406, Offer 25094 Technical specifications: - Drilling capacity in steel ST 60: 50 mm - Drilling capacity in steel ST 60: 60 mm Kodjwdvwtopfx Aabsnc - Drill spindle mount: MT 4 - Drill spindle stroke: 225 mm - Drill spindle speed continuously adjustable from 35 – 950 rpm - Right-hand and left-hand rotation - 3 feed rates: 0.1; 0.16; 0.25 mm/rev - Throat 360 mm - Max. distance between drill spindle and table/base plate 740/1220 mm - Table with 2 T-slots 700 x 590 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space required approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - With: - Emergency stop button - Lighting - Coolant system

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm Knedswd Ii Ujpfx Aaboc - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: good (used), Year of construction: 1986, Offer 23389 Technical data: Knjdpfxsrckv Hs Aabec - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Drill spindle stroke 160 mm - throat depth 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - max. distance table - drill spindle 500 mm - max . Distance machined base plate - drill spindle 1050 mm - Column diameter 160 mm - Coolant device - Lighting system - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Condition: good (used), Year of construction: 1986, machine/vehicle number: 23036, Offer 23380 Technical data: Knedpfx Aaorckw Isboc - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Drill spindle stroke 160 mm - throat depth 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - max. distance table - drill spindle 500 mm - max. distance machined base plate - drilling spindle 1050 mm - Column diameter 160 mm - Lighting system - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 1184-135-973, Offer 25248 Technical data: - Drilling capacity in steel ST 60: 45 mm - Maximum drilling capacity in steel ST 60: 55 mm - Spindle taper: MK 4 Kodpfx Aaow Rvzdjbsnc - Spindle stroke: 200 mm - Infinitely variable spindle speeds: 60 – 1600 rpm - Forward and reverse operation - 3 automatic feeds with electromagnetic engagement: 0.1; 0.16; 0.25 mm/rev - Throat depth: 360 mm - Maximum distance spindle – table / base plate: 775 / 1255 mm - Table with 2 T-slots: 630 x 540 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 2.7 / 4.0 kW - Required floor space approx.: W 800 x H 2100 x D 980 mm - Weight approx.: 750 kg - Included: - Machine vice - Keyless drill chuck 1 – 13 mm - Emergency stop button - Lighting

Condition: good (used), Year of construction: 1991, machine/vehicle number: 1956, Offer 25296 Technical Data: Knodpfx Aow S H Taoabec - Drilling capacity in steel ST 60: 40 mm - Max. drilling diameter in steel ST 60: 55 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 180 mm - Throat depth: 350 mm - Height-adjustable table with 2 T-slots: 720 x 560 mm - Max. distance table – drill spindle: 550 mm - Max. distance machined base plate – drill spindle: 1140 mm - Column diameter: 200 mm - Feeds, electromagnetically controlled: 0.15, 0.2, 0.3, 0.36 mm/rev - With overload protection - Steplessly adjustable drill spindle speeds: - 60 – 210 + 210 – 765 rpm - 120 – 420 + 420 – 1530 rpm - Drive: 400 V / 2.3 / 3.4 kW - Electric footswitch - Coolant system - Work light - Machine vice - Quick-release drill chuck - Required space approx.: W 750 x H 2050 x D 1050 mm - Weight approx.: 650 kg