Used Column Drilling Machine for sale (66,322)

Condition: excellent (used), 0.75 kW motor Dodpfoul U E Aex Agzoki Drilling depth 9 cm Maximum material height 40 cm

Condition: new, SHOWROOM MACHINE For sale is an as-new Teknatool Nova Voyager DVR 18" pillar drill with a 2 HP magnetic motor. The showroom machine is in its original condition, so you receive the full warranty. Dedexu Dfkopfx Agzoki Technical data - Working area diameter: 18" = 457 mm - Distance spindle centre to column: 228.5 mm - Drilling depth: 152 mm (spindle travel) - Spindle taper: MT2 - Drill chuck clamping range: 1-16 mm - Forward/reverse rotation - Keyed drill chuck The machine is located in A-5431 Kuchl and can be inspected and collected at any time during our opening hours. Subject to prior sale!

Condition: ready for operation (used), ERLO TCA-40 Drilling capacity in steel, diameter 40 mm (max) Throat 3depth 60 mm Stroke for drilling 200 mm Max threaded diameter M33 Spindle taper MT4 Diameter of column 175 mm Dedpju Hyc Djfx Agzski Spindle speeds min/max 61/1169 rpm Dimensions of table 550x550 mm Ready for production!

Condition: good (used),

Condition: good (used), Internal article no.: 24035 Column drilling machine Solid TB15 Djdpfxjtt Ahps Agzoki 2 speed settings Left-right rotation Spindle holder: MK2 Quill stroke: 100mm (with adjustable depth stop) Speed adjustable via belt. Speed levels unfortunately not visible. (Presumably up to 4000 rpm) Table: 320 x 260mm Dimensions (LxWxH): 60 x 40 x 170cm Weight: approx. 300Kg

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 452 year of construction 1996 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 Dkedpfxeikrtqs Agzei throat 280 mm drilling slide stroke 500 mm distance spindle nose to table 185 - 685 mm table size 490 x 400 mm Spindle speed 50 - 500 rpm. Stepless Drill slide feed rate 20 - 224 mm/min. Stepless Drill slide rapid traverse 4.5 m/min. Motor power feed 0.18 kW Motor power rapid traverse 0.75 kW Motor power drilling spindle 1.1 kW (speed 1000 rpm) Mains connection 400 volt, 50 Hz - Spindle speed infinitely variable via frequency converter - Drill slide feed infinitely variable via frequency converter - 2 operating modes set-up and automatic mode - central lubrication - control cabinet at the back of the machine - swivelling control panel - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 1000 kg. good condition

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm spindle distance max. 685 spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm autom. feed 224 mm/min. Dkodpsgd Ipkefx Agzsi rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Mains connection 400 Volt, 50 Hz - Prduction drilling machine with spindle speed and feed rate - actual spindle speed 2000 rpm. - actual feed speed 224 mm/min. - 2 operating modes manual and automatic - electric drill head height adjustment - central lubrication - control cabinet at the rear side of the machine - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 900 kg good condition

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Djdpjwk Nxqjfx Agzeki Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Dksdpfsu T Ty Hex Agzsi Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture: 1981 Drilling capacity: 32 mm Dkjdpfx Agovu Dv Hjzji Spindle taper: MK 3 - long quill Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 0.9 and 1.3 kW, pole-changeable - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless through variator gearbox - Intermediate gear stage for high torque at low speeds - RPM counter for spindle speed - Table height adjustable by handwheel - Machine lamp - Emergency stop via foot switch and kick switch - Quick-action drill chuck 1 to 13 mm Space requirement L x W x H: 1200 x 650 x 1900 mm Weight: 400 kg Very good condition Machine tested with 30 mm drill diameter in steel - runs very well

Condition: new, Year of construction: 2025, Continuous/normal drilling capacity 25/30 mm Dedpfxodvhdij Agzeki Thread cutting capacity max. M20 Spindle MK III Drilling depth 125 mm Thrust 260 mm Column diameter 110 mm Usable table surface [WxL] 420x340 mm Speed display scale Drilling depth display scale Drilling depth stop with fine adjustment Table height adjustment with rack Motor three-phase 400 V pole-changing 0.90/1.45 kW Spindle speed with gear, infinitely variable 125-4000 1/min in 2 stages I: 125-2000 1/min II: 250-4000 1/min The stage change is carried out by changing the belt OPTION 1 - € 610.00 Drilling package 4 consisting of: - Vice [felix] 2.0 - 120 mm, clamping range 0-168 mm - Keyless drill chuck, B18 mount, 3-16 mm (accuracy 0.17 mm) Taper mandrel MK 3 B18 and reducing sleeve Mk3 to Mk 2, as well as MK 3 to Mk 1 Delivery: free of charge including packaging FACTORY WARRANTY: 3 years NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 2012, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, From insolvency: Gillardon GB 40 VE Year of manufacture: 2012 No. 4519-130-3913 electromagnetic feed 0.1/0.16/0.25 on the cross lever via push button Infinitely variable spindle speeds from 60-1600 rpm 2-speed motor work light emergency stop button 200mm quill travel 350mm throat depth table size 630x535mm – clamping surface 400x500mm MK 4 taper – with Röhm keyless chuck 3-16mm machine height 2060mm – weight approx. 480kg The machine runs very smoothly and precisely Table and columns with visible signs of use Dsdstw Rk Tspfx Agzski Digital speed display non-functional + vice Cekaba-Bon 230mm

Condition: new, Infinitely variable pillar drill with fully-fledged tapping unit. Equipped with digital speed display as standard. Drilling table adjustable via rack and swivels around the column. Motor protection. Technical data: Drilling capacity: 40 mm Thread cutting: M 24 Spindle: MK 4 Drilling depth: 150 mm Spindle speeds, infinitely variable Range A: 65 - 540 1/min Range B: 245 - 2000 1/min throat depth: 265 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 115 mm Table size: 560 x 470 mm / 14 mm Base plate size: 685 x 485 mm Dimensions, approx. (W x D x H): 580 x 950 x 2000 mm Connected load: 1.7 kVA Weight, approx.: 370 kg Equipment - Gearbox reduction gear - Large machine table - Digital speed display - Stepless speed adjustment - Thread cutting device - Table clamping and height adjustment from the front - Drilling depth stop - Overload protection Scope of delivery: - Coolant device Dodpfx Agsqfdywszski - Two MK 3/2 reducing sleeves - LED machine light - Height-adjustable protective cover with micro limit switch - Operating instructions - CE/IEC conformity

Condition: new, Drilling capacity max.: 30 mm Thread cutting: M 16 Tool rear ham: MK 3 Djdpsd R Nv Ijfx Agzski Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German Documentation and German Service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant device - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: good (used), Column drilling machine GILLARDON GB 25 - Drilling capacity / steel: 32 mm - Drilling capacity / cast iron: 35 mm - Speed range – stepless: 60 - 1800 rpm - Rotational direction / right - left - Morse taper MT 3 - Throat depth: 290 mm - Quill stroke: 175 mm - Table size: 450x360 mm - Table height adjustment via hand crank - Thread cutting device - Coolant system - Drill chuck - Analog speed display - Foot switch - Emergency stop Dedpfxox Hr D Ie Agzoki - Documentation Dimensions: LxWxH 0.7x0.7x2 meters / Weight: 470 kg Subject to errors and typographical mistakes

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Dimensions and weights: Column diameter: 150mm Length (product): approx.880mm Width/depth (product): approx.595mm Height (product): approx.2445mm Weight (net): approx.550kg Drilling capacity: Drilling capacity steel (S235JR): 40mm Continuous drilling capacity steel (S235JR): 35mm Tapping steel (S235JR):M 30 Drilling table: Drilling table work surface length: 530mm Drilling table work surface width: 530mm Drilling table T-slot size:18mm Drilling table T-slot number: 3 Drilling table T-slot spacing: 125mm Drilling table rotation: 360 Drilling table inclination: ± 90 Load capacity drilling table: 250kg Distance spindle - drill table max.:740mm Distance spindle - drill table min: 130mm Speed range: Speed range: 30 - 2430min¯¹ Number of speed ranges: 4 steps Speed control: electronic Electrical data: Drive motor power: 2.2kW Supply voltage: 400V Mains frequency: 50Hz Machine base: Distance spindle - machine base max.: 1210mm Machine base working surface length: 435mm Djdpfx Aeq T Ry Uegzoki Machine foot working surface width: 445mm Machine foot T-slot size: 18mm Machine foot T-slots quantity: 2 Machine foot T-slot distance: 150mm Spindle: Quill stroke: 170mm Spindle holder: MK 4 throat: 350mm Quill feed: automatic Quill feed speed: 0.1 - 0.2mm/rev Speed levels quill feed: 3 levels Motor(s): Coolant pump Power drive motor: 100W

Condition: excellent (used), Drilling capacity in steel (diameter): 23 mm Djdouzacgopfx Agzeki

Condition: excellent (used), Column drilling machine GILLARDON GSB 20 Dsdpfxomu Alme Agzjki

Condition: new, Year of construction: 2025, Power: 750 W / 400 V Drilling capacity in steel: 25 mm Speed range: 60 – 3050 rpm Spindle taper: MK3 Dkjdpoir Embefx Agzoi Quill stroke: 95 mm Spindle reach: 209 mm Table size: 308 mm x 308 mm Quick-action chuck: 1 – 16 mm Weight: 107 kg

Condition: as good as new (ex-display), Year of construction: 2025, Power: 0.85, 1.5kW Speed range: 300 - 4000 rpm Speed steps: stepless spindle mounting: MK-3 Dodpehpmbbsfx Agzjki Drilling stroke: approx. 105 mm spindle throat: 200 mm Weight: 152 kg

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle mounting: MK-4 Dedpfjgulr Hsx Agzjki Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 TAP Condition new machine Dsdpfxed Hrhve Agzeki Spindle speed (continuous): Area A-80 - 1,440 RPM. Area B 180-3,200 RPM. Standard ALB ear performance: 30 mm equipped as standard with: -infinitely variable speed control -Digital display for speed -Digital display for drilling depth -Thread cutting device -Light machine -automatic tool ejector -Manual

Condition: new, Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Dkodpfx Aed Sd Tvjgzei Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Delivery: - Table clamping and height adjustment from the front - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant device - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: new, Stepless pillar drilling machine for versatile applications. Equipped with digital speed display as standard. Drilling table adjustable via toothed rack and swivels around the column. Motor protection switch, star grip. Picture shows SB 25 S Technical data: Drilling capacity: 30 mm spindle: MK 3 drilling depth: 130 mm throat depth: 250 mm spindle speed, infinitely variable: 230 - 2700 rpm table size: 460 x 360 mm column diameter: 100 mm dimensions, approx. (WxDxH): 600 x 810 x 1780 mm motor power: 1,5 kW Mains connection: 400 V Weight, approx.: 230 kg Equipment: - Stepless speed adjustment with digital display - right / left rotation - T-slot stones - 24 V electrics - Height adjustable spindle protection device with micro limit switch - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivels around column - Reversing switch for R/L-run (option) Scope of delivery: - Machine light - emergency stop pushbutton - full motor protection - star grip Dksdpfx Agjp Duagozji - CE

Condition: new, Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Dkodjd R Acbepfx Agzsi Thread cutting capacity: M 12 Spindle: MK 3 Drilling depth: 135 mm Infinitely variable spindle speeds: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Power supply: 400 volts, 50 Hz Equipment: - Thread cutting device - Digital display for speed as standard - Coolant device - LED machine light - Continuously variable speed adjustment - 24 V electrics - Base plate with T-slots - Drilling table adjustable via rack and worm gear and can be swiveled around the column - Emergency stop button - Full motor protection - Star grip - CE compliant