Used Combination Machine for sale (67,512)

Condition: excellent (used), Year of construction: 2023, DEMONSTRATION MACHINE! For sale is a used Felder KF 700 SP sliding table saw & spindle moulder with a cutting width of 800 mm. The machine is in excellent condition and has been refurbished and inspected by our professional staff. (Fully functional) Technical data: - Tilting circular saw and spindle moulder 90-45° - Sliding table 2500 mm - Extension table with mitre fence 2600 mm - Rip fence with fine adjustment - Cutting width 800 mm - Spindle fence with multi-adjustment system - 4 spindle speeds - 3 motors, each 7.5 HP (5.5 kW) Iijdpfsy Hgxmjx Aiyog - Automatic star-delta start The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, spindle moulder, combination machine, combi machine, milling machine Reference: R-D1618

Condition: excellent (used), Year of construction: 2019, For sale is a used Hammer B3Winner Comfort circular saw and router with a cutting length of 2000 mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. (Fully functional) Technical specifications: - Circular saw and router tiltable 90-45° - Sliding table 2000 mm - Outrigger table with degree grid index - Miter stop 1300 mm - 4 routing speeds: 3000/6000/8000/10000 rpm - Cutting width 800 mm - 2 motors, each with 5.5 HP (4 kW) 400 volts - Year of manufacture 2019 Iiodpsv Sbpxsfx Aiyog The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, milling machine, combined machine, combination machine Reference: R-L0AHG

Condition: excellent (used), Multi-function machine, panel saw, thickness planer SCM Casadei Model: C 30 C Thickness planer 3 kW: Width: 30 cm, Max height approx. 200 mm, 3 knives, 1 feed speed, Jointer: Width: 30 cm, Table length: 150 cm, 3 knives, Adjustable angle fence, Iijdpfx Ajy Eyhrjiyeg Spindle moulder 3 kW: Spindle diameter 40 mm, Spindle height adjustment up-down, 4 speeds, Side sliding table, Adjustable fence, Panel saw 3 kW: Scoring unit, Height and 0-45 degree angle adjustment, Sliding table 225 cm, Ruler on side table, Max saw blade 315 mm, Horizontal drilling machine: Table adjustable up-down, front-back, left-right, The machine has 3 motors, Power supply 380V, Used machine in good condition, ready for operation, Robust and multi-functional.

Condition: new, Year of construction: 2025, The track chain links for multi-blade saws are cast from high-quality cast iron or steel castings, ensuring the superior quality of the finished tracks. The links can be equipped with additional carrier spikes. The track components—guides, pins, and bushings—are made from high-grade materials and undergo heat treatment and thermo-chemical processing. The feed accuracy of the track is achieved by a special machining method for the holes in the links. Upon request, we manufacture guides, breakers, sprockets, pulleys, and shafts. We design and produce tracks for multi-blade saws from all over the world, for manufacturers such as: A.COSTA, RAIMANN, TOS SVITAVA, REMA RESZEL, GABIANNI, PAUL, OGAM, and all models of Chinese tracks. Iisdpfxswvp Dde Aiysg

Condition: like new (used), For sale is a Hammer edge sanding machine HS950, with a belt length of 2515 mm. The machine is in good condition and has been inspected by our specialist staff. - Belt length: 2515 mm Iodpow Hf D Iofx Aiyoig - With oscillation motor - Tiltable 0 - 90° - Motor power: 2.2 kW / 3 HP - Year of manufacture: 2024 - Demonstration machine The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: edge sanding machine, sanding machine, surface finishing Reference: R-A0117

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Ijdpfx Aeyzdnbsiyeig Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 126375/99-274723, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 31.12.2025! The offer includes: Stahl Zi52/4-Fi52 (year of manufacture: 1999; serial number: 126375/99-274723) Stahl KBK 52 (year of manufacture: 1999, serial number: 121492/99-271702) The folding rollers of the machine have been replaced. The machine is manually adjustable. Ijdpfx Aexyfmaeiyoig

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 338002, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 31/12/2025! Iiodoxyf T Tepfx Aiyjg EQUIPMENT 6 folding pockets, electrically adjustable Altar folding pocket

Condition: new, Year of construction: 2026, For sale is a high-quality Robland multi-combination machine. This unit integrates several woodworking functions in a compact and extremely robust design—ideal for workshops, joineries, or ambitious woodworkers. General Data: + Weight: 560 kg + Motor power: 3 kW (4 HP) Circular Saw: + Saw blade diameter: 250 mm + Speed: 4500 rpm + Max. cutting height: 85 mm + Swivel range: 90° – 45° + Sliding table: 1450 mm + Rip fence cutting width: 655 mm + Extraction ports: 100 mm + 60 mm Spindle Moulder: + Spindle diameter: 30 / 32 / 50 mm / 1¼" + Spindle speeds: 3000 – 6000 rpm + Max. tool diameter: 180 mm + Max. tool height: 120 mm Iisdpfx Aiey Nyqusyjg + Travel: 140 mm + Tilting up to 90° + Optional tenoning hood up to 250 mm + Extraction port: 100 mm Planer & Thicknesser: + Cutter block diameter: 70 mm + Cutter block speed: 5500 rpm + Working width: 310 mm + Planer table: 1320 x 310 mm + Thicknessing height: up to 230 mm + Number of knives: 3 + Tersa cutter block + Planer knives: 310 x 25 x 3 mm + Feed speed: 6 m/min + Extraction port: 100 mm + Mortising unit (optional) + Drill chuck: 0 – 16 mm + Travel: 165 x 140 mm + Drilling depth: 85 mm Location: 39340 Haldensleben Price: €5,750 net

Condition: new, Year of construction: 2025, Our C300 5-job combines feature a sturdy folded and electro-welded steel plate frame. Significantly thick cast iron platens are carefully ground and milled, and all material used is certified to ensure the highest quality. They mount three self-braking motors, each individually protected, with the ability to adjust power from 3 hp to 4 hp according to the required specifications. The carriage, made of milled and anodized aluminum with significant thickness, can vary in length depending on the model or specific requirements. It runs on steel balls on a track also made of steel and is adjustable for optimum smoothness. Standard equipment includes a 1600 mm carriage, while optional 2200 mm carriages are available. The C300 is an ideal choice for the hobbyist and is indispensable for the restorer. Built to above-average standards in its class, it maintains a price-performance ratio that makes it truly competitive in the marketplace. The machine is fully compliant with the latest CE regulations, ensuring high safety standards. TECHNICAL DATA: Work surface mm 300×1500 Knife-holder shaft diameter mm 70 Shaft rotation speed g/m 5700 Number of knives no. 3 Knives dimensions mm 300x25x3 Max platen registration mm 4 THICKNESS PLANER Work surface mm 300×660 Max pass thickness mm 5.5 Feed speed m/min 7 Max wood passage mm 220 Wood passage min mm 4 Shaft rotation rpm 5700 CIRCULAR SAW Worktable mm 220×1000 Rotational speed g/mm 4500 Iedpfxsuzxh Is Aiyjig Blade Ǿ 250 Blade hole Ǿ 30 Max cutting height 90° mm 80 Max cutting height 45° mm 50 Tilting blade 0° 45° Max pass between blade and guide mm 560/700 Engraver Ǿ 90 Scoring hole Ǿ 22 Rotational speed rpm 7000 CAVING MACHINE Work table mm 500×250 Longitudinal stroke mm 205 Transverse stroke mm 95 Vertical stroke mm 90 Spindle Ǿ 16 Spindle rotation rpm 5700 VERTICAL MILLING MACHINE Worktable mm 220×1000 Rotation speed rpm 2000/3100/4400/ 7000 Standard spindle diameter mm 30/35/50 Shaft length mm 105 Vertical shaft stroke mm 115 Max tool diameter mm 160 Max tenon depth mm 55 STANDARD EQUIPMENT Counter frame, flag support mm 800×600 Three-phase motor power KW/HP 2.2/3.0 Weight kg 560 ACCESSORIES ON REQUEST Single-phase motor KW/HP 4.0/3.0 Sliding carriage mm 2200×315 LIST PRICE EXCLUDING VAT

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Iedpfoxnqyhjx Aiyeig Scope of delivery: Technical Data: Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, - NEW -- With TERSA cutter block for secondsChange planer knives- TERSA planing knife system enables particularlyquiet running- Helical-toothed steel feed roller forconstant and even wood intake- The particularly long planing tables from onePiece allow easy dressing of theWork pieces- Large planing fence can open when openingthe planing tables remain in position- Planing tables that open to the rear- The high machine weight ensures the highestPrecision and smooth running- Powerful industrial engine- Robust steel / cast iron construction- work tables are made of gray cast iron,post-annealed and stress-free, therebyinsensitive and permanently flat- Table lips for quiet runningEquipment detailsTERSA planing knife shaft- No more adjusting and screwing- Blade change in seconds- Self-locking- Particularly quiet- Perfect planing resultSuction hose connection- The suction nozzle of the planer and thicknesspoint in the same direction.- The hose connection is made by just oneSide off.- No hose is needed aroundthe machine passes ve- Stable chain drive- Steel drive wheels- Solid cast iron bearing blockPlaning mill- Prevent massive kickback protectionthe kickback of workpieces- TERSA planing knife shaft with three knivesensures an optimal planing patternThe material feed- Helical steel feed rollers for oneconstant and even material intakewithout prints- Multiple teeth grip at the same time for powerfulFeed- Wear-free in contrast to rubber feedrollingTechnical specifications:Length approx. 1725 mmWidth / depth approx. 880 mmWeight approx. 270 kgDressing chip removal max. 4 mmExtraction nozzle thickness 2 x 120 mmThick working height min. 3 mmThick working height max. 230 mmThickness of the chip removal max. 4 mmDrive motor power 4 kWConnection voltage 400 VMains frequency 50 HzPlaner knife shaft type TERSANumber of planing knives 3 pcsSpeed ??5200 min¯¹Planing width max. 300 mmFeed speed 7 m / minItem No. 5503031Storage location 97447 Gerolzhofen- free loaded- Isdpfxjvwgaas Aiyoig

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Iisdpfevwd U Iox Aiysg

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Iodpfxjvwflbs Aiyeig

Condition: new, - New -Description:- For sawing, milling, surface planing, thickness planingand optional slot drilling- The work tables made of heavily ribbed gray cast ironand the underframe made of welded steel guaranteeTorsion resistance and vibration-free work- Unique in this performance class: smootherAluminum format slide, anodized, with ball contact system- Swiveling saw blade from 90 ° - 45 °- Table bracket with graduated scale and aluminum crosscut fencefor angled cuts on plates and large workpieces- Planing unit with TERSA quick change systemwith three planer knives- Helical-toothed steel feed roller for constantWorkpiece infeed when thicknessing- curved milling protection hood for profiling,with fine adjustment as standard- Milling unit with two speeds- The units are driven by three independent motors- Made in Italy qualityTechnical specifications:Dimensions and weightsWeight (net) approx. 245 kgDressingPlaning table width 300 mmPlaning table length 1200 mmAngle of inclination saw / planer fence 90/45 °Chip removal ssing 3 mmConnection suctionExtraction nozzle diameter 4 x 120 mmSuction nozzle diameter of the saw blade guard 60 mmInstallation informationRequired space length 2460 mmSpace requirement width / depth 2155 mmExplanation of space requirements: Take the dimensions into accountmaximum travels or useful cknessThickness table length 450 mmThickness table width 300 mmWorking height thickness min. 3 mmWorking height thickness max. 200 mmChip removal max. Thickness 3 mmElectrical dataConnection voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle of drive motor 40%Drive motor power 3 x 1.8 kWSliding carriage and tableFormat sliding carriage length 1140 mmFormat sliding carriage width 201 mmFormat sliding carriage height 70 mmTable length 1024 mmTable width 224 mmTable height 900 mmMilling spindleSpindle inclination 0 °Spindle mandrel diameter 30 mmUsable length of the spindle 75 mmSpindle speed (s) 5000 - 7500 min? ¹Milling tool diameter l diameter max. 160 mmTool diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmPlaner knife shaftPlaner shaft type TERSAPlane shaft diameter 62 mmNumber of planing knives 3 pcsCircular saw unitTrimming length 1200 mmCutting width with rip fence 540 mmMax. Cutting width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45 °Max. Cutting height at 90 ° 67 mmMax. Cutting height at 45 ° 40 mmMax. Saw blade projection 90 ° 75 mmMax. Saw blade projection 45 ° 60 mmFeedFeed speed 6 m / minScope of delivery:- Tersa quick-change planer knife shaft- anodized aluminum sliding table- Multifunctional stop for parallel cuts and surface planing- Table extension arm with crosscut fence and stop jaw- Eccentric clamping armItem no .: 5500030 Iisdevwf Enepfx Aiysg

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Iisdpfx Ajvwga Heiyjg

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Iedpovwgc Usfx Aiysig

Condition: used, Year of construction: 2000, functionality: fully functional, cutting height (max.): 96 mm, saw blade diameter: 300 mm, planing width: 300 mm, input voltage: 400 V, power: 3 kW (4.08 HP), input frequency: 50 Hz, sliding table length: 2,250 mm, The used SAMCO CU 300K is a versatile combination woodworking machine designed for professional applications. It integrates multiple machining functions in a single unit and is ideal for workshops with limited space. Despite its year of manufacture, it offers robust construction and reliable performance for daily operations. Machine equipment Circular saw unit Surface planer Thickness planer Milling unit Further technical data Iiedpfx Aeyyltijiyog Maximum thickness planing height: 230 mm

Condition: new, Grinding wheel, diameter x width ----- 200 x 32 mm Spindle bore ----- 32 mm Grinding wheel ----- Grit 36 Wire brush, diameter x width ----- 200 x 20 mm Speed ----- 2850 rpm Motor ----- 900W - 230V - 1 Phase Motor ----- 900W - 400V - 3 Phase Iodpfx Aioga Tw Hoysig Weight ----- 26 kg OPTIONS * Base cabinet Price: €99.00 excluding VAT

Condition: as good as new (ex-display), Year of construction: 2026, Combination 4-in-1 machine HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Beam length 2,250 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 103 / 82 mm Max. support width to the left of the saw blade 2,310 mm Cutting width with parallel guide 820 mm Saw blade tilt 90° - 45° - Jointer - Working width 300 mm Jointer table length 1,510 mm Cutterhead diameter / Number of cutter knives 72 mm / 3 pcs. - Thicknesser - Iedpfx Aieci Tvhoyoig Table dimensions 300 x 585 mm Min./max. working height 3 / 230 mm Max. material removal 4 mm Feed rate 7 m / min - Table Router - Usable spindle length 100 mm Max. tenon tool diameter 275 mm Max. tool diameter 210 mm Spindle speed 3,500 / 7,000 / 10,000 rpm Spindle diameter 30 mm - General - Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter on saw blade guard 60 mm - Promotional Price - Location: In stock, 54634 Bitburg

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. Iisdpfx Aisq N Ud Ijyog 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. Iijdsq Nd U Hepfx Aiyog 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Condition: new, power: 110 kW (149.56 HP), Year of construction: 2025, Bauxite Crusher: Bauxite is an aluminum ore, and crushers or mills are used to break down the bauxite into smaller pieces for further processing. Jaw crushers, impact crushers, or cone crushers may be used for this purpose. Granite Crusher: Granite is a hard and durable natural stone. Crushers used for granite crushing typically include jaw crushers, impact crushers, and cone crushers. These crushers can handle the varying hardness of granite and produce different sizes of crushed products. Bentonite Crusher: Bentonite is a type of clay with excellent water-absorbing and plasticity properties. Crushers such as jaw crushers or cone crushers are used to break down the bentonite into a manageable size for further processing. Barite Crusher: Barite, also known as baryte, is a mineral consisting of barium sulfate. Crushers like jaw crushers and cone crushers are commonly used in the crushing process of barite. Impact crushers may also be used for shaping and processing finer particles. For each of these minerals, the selection of the appropriate crusher depends on factors such as the hardness of the material, the required final product size, and the specific characteristics of the deposit. It's also important to consider whether a primary crusher, secondary crusher, or even tertiary crusher is needed in the processing flow. Iiodpfx Asq Nx Apoiyog Additionally, for certain applications, grinding mills may be employed after the initial crushing stage to further reduce the size of the particles. Grinding mills suitable for these minerals might include ball mills, Raymond mills, or vertical roller mills, depending on the specific requirements of the process. Remember that the choice of crushers and mills is often part of a larger mineral processing plant design, and the selection process should take into account the overall production requirements, mineral characteristics, and economic considerations.

Condition: new, Year of construction: 2025, Gravel and aggregate production equipment is used to crush, screen, and process stones, rocks, and other materials for the construction industry. This equipment is essential in producing various types of aggregates, including crushed stone, gravel, sand, and recycled concrete, which are used in the construction of roads, buildings, bridges, and other infrastructure projects. Here are some common types of equipment used in gravel and aggregate production: 1. Jaw Crusher: - Jaw crushers are primary crushers used to break down large rocks into smaller, more manageable pieces. They are essential for the initial stage of aggregate production. 2. Impact Crusher: - Impact crushers are used to crush rocks and stones with the help of impact force. They are suitable for shaping and producing fine aggregates. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They produce well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They are suitable for processing materials with high abrasiveness. 5. Screens: - Vibrating screens are used to separate different sizes of aggregates. They classify the material based on particle size and ensure that the final products meet specified gradation requirements. 6. Scalping Screens: - Scalping screens are used to remove oversized materials before they reach the primary crusher. This helps to optimize the crushing process and prevent damage to the equipment. 7. Washing Equipment: - Washing equipment, such as sand screws or log washers, is used to remove impurities and fine particles from aggregates. This is particularly important for producing high-quality concrete sand. Iisdpfjq Nxz Dex Aiysg 8. Conveyors: - Conveyors are used to transport materials between different stages of the crushing and screening process. They play a crucial role in enhancing efficiency in material handling. 9. Stackers and Reclaimers: - Stackers are used to create stockpiles of processed aggregates, while reclaimers are used to retrieve the material from the stockpile. Both are essential for efficient material storage and handling. 10. Crushing Plants: - Complete crushing plants include various types of crushers, screens, and conveyors integrated into a single system. These plants are designed to handle large volumes of material efficiently.

Condition: new, Year of construction: 2026, -Tfon Leveltech® TF M-5516 Leveling Machine Engineered for precision leveling, the TF M-5516 efficiently handles material thicknesses from 1 to 15 mm with advanced control features for optimal performance and ease of use. Key Specifications: -Material Thickness: 1 – 15 mm. -Maximum Material Width: 1,600 mm Minimum Material Length: 110 mm Quick Change System for Straightening Rollers: Standard Flattening Gap Adjustment: Servo Hydraulic / PC Controlled. Overload Protection: Standard Iijdpfx Aekyrqfeiyeg Control Screen: Touchscreen Machine Size (L × W × H): 3,500 × 2,905 × 1,950 mm Total Weight: 19.000 kg