Used Combined Planing Machine for sale (66,999)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Weight 280 kg Total power requirement 2,2 kw Nodpfx Aisvz Eqxsyeda

Condition: used, Dimensions (L/W/H) 2350x1050x1200 mm machine weight ab. 890 kg Second-hand machine Features and technical specifications: - 4-blade planer knife shaft - Feed speed 7.5/15 m/min - Planer: - Working width: 500 mm - Total table length: 2200 mm - Motor: 4 kW - Thickness: - Minimum working height: 3 mm - Max. working height: 235 mm - Maximum chip removal: 8 mm - Digital height adjustment display with decimal readout Availability: at short notice Nedozk Np Hopfx Aiyoda Location: 63934 Röllbach

Condition: good (used), Year of construction: 1994, Working width 500 mm Working height 240 mm Motor output 4,0 kW Length of the planing table 2470 mm Number of knives 4 St. Nsdpfxozfqkne Aiyeda Feed speed 7/14 m/min. machine weight ab. 1050 kg

Condition: used, with Tersa knife shaft used, good condition Make Müller Brugg Type DA 6 M Planing width approx. 610 mm Planing height approx. 220 mm Table length approx. 2200 mm Bridge protection Slotted table lips Low-noise table lips Number of knives 4 pieces Knife system - Tersa reversible knives Table sliding rollers Space required approx. 2300 mm x 1500 mm x 1100 mm Weight approx. 2000 kg Nsdpevwgh Rjfx Aiyeda Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: used, Year of construction: 2003, equipped with Tersa cutterblock and electric height adjustment, tables measured with top precision max. 1/10 mm Nodpfx Ajzd Hdneiyjda completely set up used top condition cleaned functionally tested partially refurbished Manufacturer: SCM Type: FS 410 Year of manufacture: 2003 Machine no.: 159435 CE type-tested GS dust-tested Number of cutters: 3 Feed rate m/min: 6 + 12 Bridge guard Slotted table lips Low-noise table lips Motorized automatic brake Tersa cutter system Rubber draw roller Digital display for planing height Electric height adjustment with fine adjustment Extraction hood integrated Motor kW: 5.5 Planing width approx. mm: 410 Planing height approx. mm: 240 Table length approx. mm: 2100 New price approx. €: 7500.00 Extraction connection mm: 100 Space requirement approx. L x W x H mm: 2100x900x1300 Weight approx. kg: 710 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: used, with segmented infeed roller and segmented pressure bar Tables with top accuracy of 0.0 – max. 1/10 mm Bridge-type, single-sided reversible knife system completely adjusted used good condition cleaned functionally tested partially refurbished Manufacturer: Kölle Type: HK63 Machine no.: 1409 Number of knives: 2 Feed rate m/min: 2 speeds Ndedezd Hc Rjpfx Aiysa Jointing strip Table guide rollers Segmented pressure bar Segmented infeed roller Integrated dust extraction hood Planing width approx. mm: 630 Planing height approx. mm: 220 Table length approx. mm: 2100 Dust extraction connection mm: 160 Space requirement approx. L x W x H mm: 2200 x 1300 x 1400 Weight approx. kg: 1200 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: used, Year of construction: 1994, from an authority Centro-Fix cutterhead rubber extension completely adjusted used in top condition cleaned functionally tested partially refurbished Manufacturer: Panhans Type: 445-A Year of manufacture: 1994 Machine no.: 410 GS-tested for wood dust Number of cutters: 4 Feed rate m/min: 7 + 14 Auxiliary stop Table lips with slots Table lips with low noise motorized automatic brake Centrofix reversible cutters Table guide rollers Articulated pressure bar Rubber extension roller Digital display for planing height Electric height adjustment with tip fine adjustment Handwheel fine adjustment Extraction hood integrated Motor kW: approx. 5.5 Planing width approx. mm: 510 Planing height approx. mm: 200 Table length approx. mm: 2250 Extraction port mm: 160 Space requirement approx. L x W x H mm: 2300 x 1050 x 1400 Weight approx. kg: 1000 Ndodpfezd Hcqex Aiysa Total connected load approx. kW: approx. 5.5 Location: 97447 Gerolzhofen, free loading, unpacked Transfer in current condition as inspected, without warranty and guarantee

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x740x1000 mm Weight 420 kg Total power requirement 4 kw Ndsdpfx Aovz Expeiyja

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x740x1000 mm Ndsdpjvz Ewljfx Aiyja Weight 420 kg Total power requirement 4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Weight 280 kg Total power requirement 2,2 kw Nedpfevz E Drex Aiysda

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2300x1150x980 mm Weight 900 kg Njdpfev A Hhuex Aiyoda Total power requirement 7,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x745x1100 mm Weight 580 kg Ndjdpfx Aevz Emysiyoa Total power requirement 4 kw

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Scope of delivery: Technical Data: Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min Ndedsxnqyhepfx Aiyea

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Ndedevwflbjpfx Aiyja

Condition: new, - NEW -- With TERSA cutter block for secondsChange planer knives- TERSA planing knife system enables particularlyquiet running- Helical-toothed steel feed roller forconstant and even wood intake- The particularly long planing tables from onePiece allow easy dressing of theWork pieces- Large planing fence can open when openingthe planing tables remain in position- Planing tables that open to the rear- The high machine weight ensures the highestPrecision and smooth running- Powerful industrial engine- Robust steel / cast iron construction- work tables are made of gray cast iron,post-annealed and stress-free, therebyinsensitive and permanently flat- Table lips for quiet runningEquipment detailsTERSA planing knife shaft- No more adjusting and screwing- Blade change in seconds- Self-locking- Particularly quiet- Perfect planing resultSuction hose connection- The suction nozzle of the planer and thicknesspoint in the same direction.- The hose connection is made by just oneSide off.- No hose is needed aroundthe machine passes ve- Stable chain drive- Steel drive wheels- Solid cast iron bearing blockPlaning mill- Prevent massive kickback protectionthe kickback of workpieces- TERSA planing knife shaft with three knivesensures an optimal planing patternThe material feed- Helical steel feed rollers for oneconstant and even material intakewithout prints- Multiple teeth grip at the same time for powerfulFeed- Wear-free in contrast to rubber feedrollingTechnical specifications:Length approx. 1725 mmWidth / depth approx. 880 mmWeight approx. 270 kgDressing chip removal max. 4 mmExtraction nozzle thickness 2 x 120 mmThick working height min. 3 mmThick working height max. 230 mmThickness of the chip removal max. 4 mmDrive motor power 4 kWConnection voltage 400 VMains frequency 50 HzPlaner knife shaft type TERSANumber of planing knives 3 pcsSpeed ??5200 min¯¹Planing width max. 300 mmFeed speed 7 m / minItem No. 5503031Storage location 97447 Gerolzhofen- free loaded- Ndsdpfovwgaaox Aiyea

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Ndodpfx Aijvwd U Ioyja

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Ndodpsvwga Hefx Aiyea

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Ndedpsvwgc Uofx Aiyea

Condition: new, Year of construction: 2025, Jointer-Thicknesser minimax fs 41es TERSA Maximum configuration for the professional user. Article number 5503431 Brand Holzkraft / SCM Helically toothed steel infeed roller for consistent and uniform material feed, enabling chip removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious woods. Models with a TERSA cutterblock for seconds-fast planer blade changes and particularly quiet operation. Material feed with two speeds. Particularly long jointer tables enable easy and precise jointing of workpieces. Work tables made of grey cast iron, annealed and stress-free, making them insensitive and permanently flat. Tables that open simultaneously towards the rear for short setup times. Thickness table adjustment via handwheel with numerical display for planing height. High machine weight for maximum precision and smooth operation. Nedpfx Aislht Htsyoda Powerful industrial motor. Robust steel/grey cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product) approx. 2200 mm, Net weight approx. 450 kg Width/Depth (product) approx. 1160 mm Jointer Total length of tables 2200 mm, Jointer fence length 1200 mm Working height 905 mm, Jointer fence height 150 mm Chip removal max. jointer 5 mm Connection for dust extraction Dust extraction nozzle diameter thickness 1 x 120 mm Thicknesser Thickness table length 775 mm, Working height thickness max. 240 mm Thickness table width 410 mm, Chip removal max. thickness 5 mm Working height thickness min. 3 mm Electrical Data Power drive motor 5 kW, Mains frequency 50 Hz Connection voltage 400 V Planer cutterblock Planer cutterblock type TERSA, Planer cutterblock speed 5000 min⁻¹ Planer cutterblock diameter 95 mm, Planing width max. 410 mm Number of planer blades 4 pcs Feed Feed speed 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: In stock, 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2019, Combined jointer and thicknesser SCM minimax fs 41e Year of manufacture: 2019 Power of drive motor: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Planer cutterhead type: TERSA – 4 cutterheads Speed: 5200 rpm Planing width, max.: 410 mm Feed rate: 6 / 12 m/min Dust extraction port: 2, diameter for thicknessing: 120 mm Jointer Infeed table, length: 1034 mm Chip removal, max.: 5 mm Dimensions and weights, length: approx. 2000 mm Width/depth: approx. 1110 mm Height: approx. 1115 mm Weight: approx. 430 kg TERSA cutterhead system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and uniform material feed. Material feed with two speeds. Numerical display for thickness table height. The 2,000 mm long jointer tables facilitate easy jointing of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them resistant and permanently flat. Sturdy, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height. The high machine weight ensures the highest precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction. Nodpezi Nhmjfx Aiysda

Condition: used, 5-function combination Hinkl, 410 mm, in good condition, 2.2 kW, 1550 mm, 410 mm table width, 2 knives, approx. 500 kg. Price changes and errors excepted, subject to printing and typographical errors. Ndedpfx Ajx H Ucyoiyoa

Condition: used, AD planer Felder AD741, very good condition, year of manufacture 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kg Ndsdpfx Aijvrvkdeyea Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Year of construction: 2019, - 6 working spindles - max. working width 250 mm - feed rate 6 - 24 m/min used planing and profiling machine Manufacturer: HOMAG Type: Optimat LPP306 Year of construction: 2019 OPTIMAT LPP306 Planing and profiling machine with 6 working spindles. Workpiece width after processing: - min. 10 mm - max. 250 mm Workpiece height after processing: - min. 10 mm - max. 160 mm Control system: - PowerControl with powerTouch LPP300 Infeed table 2,500 mm Feed rate min. 6 m/min max. 24 m/min FIRST LOWER SPINDLE: - Spindle motor power 7.5 kW - Siemens IE3 energy-saving motor Nsdpfx Aezuzf Ujiyjda Power speed range: - 7.5 kW - 6,000 rpm Spindle diameter 40 mm Spindle length 281 mm FIRST RIGHT SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 176 mm FIRST LEFT SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length: 176 mm Total length: 176 mm FIRST UPPER SPINDLE: - Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 266 mm SECOND UPPER SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm SECOND LOWER SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 266 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm Njdszuzfbjpfx Aiyoda - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm Njdpfozhu I Aex Aiyeda - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)