Used Cnc Plano Milling Machine for sale (65,357)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Lhedpfx Ajyahv Ssqvsg Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm Lodpfxjy Ni Ivo Aqvshg H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,291 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 750 mm, table length: 3,200 mm, table width: 1,400 mm, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,400 mm Z-axis travel: 750 mm Table size: 3,200 x 1,400 mm MACHINE DETAILS Control type: CNC Control system: Heidenhain Operating hours Spindle run time: 23,291 h Ljdpfsy R Dn Hjx Aqvehg Program run time: 27,807 h Control on time: 83,301 h Machine on time: 73,907 h

Condition: used, Year of construction: 2014, operating hours: 33,100 h, machine/vehicle number: 2941, Control system: HEIDENHAIN TNC530, travel range X/Y/Z: 3,500 x 1,200 x 1,250 mm, swivel head: 2.5°, tool holder: SK50, 60 tool positions, chip conveyor: URRETXU 11-20132, serial number: 4855492004U5E2, filter system: JUMA+GAIN, serial number: 7136, capacity: 60 l/min, year of manufacture: 2013. Lhodpjy T Nx Nefx Aqveg

Year of construction: 2016, operating hours: 17,607 h, condition: used, machine/vehicle number: 7975, Control system: HEIDENHAIN TNC640, travel range X/Y/Z: 10,000 x 1,300 x 2,200 mm, swiveling head: 2.5°, tool holder: SK50, 60 tool positions, chip conveyor: AXA FSB 300/TLG.63, serial number: 173492-2, year of manufacture: 2016, filter system: JUMA+GAIN, serial number: 8276, capacity: 100 l/min, year of manufacture: 2016, including 2 90° stands. Lsdpfsy T Nyasx Aqvohg

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Ljdpfx Aqswrdu Aevjhg Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: good (used), Year of construction: 1992, Table clamping surface 1850 x 710 mm Permissible table load 3000 kg Travels: Longitudinal, automatic (X) 1600 mm Transverse, automatic (Y) 710 mm Vertical, automatic (Z) 850 mm Spindle holder SK 50 Speed range 20 - 3000 rpm Main motor power, AC 15 kW Transport dimensions L x W x H 3650 x 2300 x 2700 mm Weight 9400 kg Accessories / Special features: - CNC contouring control make HEIDENHAIN model TNC 360 with 3 scales - Programming language "plain text dialog" and DIN-ISO - Electronic handwheel HEIDENHAIN HR 330 with magnetic holder - 3-D touch probe HEIDENHAIN TS 120 - Main spindle compact unit RAC 3 - Control prepared for 4th axis - Universal milling head system "HURON with 2 levels, oil lubricated - Hydr. tool clamping - Coolant device - Central lubrication with interval - German electrics, INDRAMAT drives - Suspended control panel Ledpfxottamkj Aqvshg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2021, operating hours: 13,640 h, machine/vehicle number: 21121341, Catalog No.: 1.2, 3 shielded machining centers with plexiglass windows, each 250x300 cm, HEIDENHAIN TNC-640 control system, 6 controlled axes, tool holder SK50, table surface: 9,000x2,000 mm, max. table load: 30 tons, travel distances X/Y/Z: 8,000/1,300/2,500 mm, special equipment: universal milling head that automatically pivots continuously in 2 planes, internal coolant system, 60-position tool changer, rotary table (10 tons, 1,500x1,500 mm), clamping surface, continuously positionable, measuring probe RENISHAW, 4 clamping angles, external programming option via Mastercam, subject to prior sale. Lhjdey T Nx Aspfx Aqvsg

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Type: UWF 902 S Year of Manufacture: 1995 Operating Hours: 65,071 Control System: HEIDENHAIN TNC 426 Working Area X/Y/Z: 600 x 450 x 500 mm Spindle Speed Range: 20 - 6,300 RPM Tool Holder: SK 40 M & H 3D Probe (for workpiece probing) Vertical-Horizontal Milling Attachment Drilling Spindle Coolant System Tilting Table: 900 x 458 Weight: 4,000 kg Machine Dimensions: L x W x H, approx.: 3,900 x 2,000 x 2,000 mm Lhsdpfxjv Rxa Sj Aqvjg ä19526

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Type: UWF 902 H Ledev Rpr Sspfx Aqvehg Year of Construction: 1995 Operating Hours: 46,680 Control System: HEIDENHAIN TNC 426 Travel distances X/Y/Z: 600 x 450 x 500 mm Rotary table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions L x W x H approx.: 2,950 x 2,200 x 2,300 mm 19526ä

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg Lhjdpfx Aotrhq Hoqveg good condition

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Ledpfx Asv R E Rdoqvshg Very good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition Lhedpfx Ajw Nklheqvjg

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Lsdpfew A Af Isx Aqvjhg Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 Lodpfjty A Ehex Aqvehg CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: used, Lot of end mills for CNC machines. Ljdjxfithspfx Aqvshg

Condition: used, Application: Woodworking Diameter: Various Weight: 12 kg Length: Various Shank: Various As-new, unused, sharpened, and used shank cutters and drills for CNC machines as exemplarily shown. Lhedpfx Aqevy Apijvjg

Condition: good (used), Year of construction: 1990, 1 used well preserved CNC controlled tool milling machine as travelling column version with CNC path control GRUNDIG Dialog 11 table size 1600 x 675 mm tool holder SK / ISO 40 traverse X-axis, longitudinal 1200 mm Y-axis, cross 600 mm Z-axis, vertical 500 mm table load 2000 kg speed range 20 - 6300 rpm feed range, stepless 2 - 10.000 mm/min rapid traverse in all axes 10 m/min quill stroke 80 mm Drive power 100 % ED 7.5 kW 40 % ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Switch cabinet weight 470 kg Accessories / Special features: - CNC tool milling machine suitable for tool, jig and fixture making, training as well as mold making. - CNC path control GRUNDIG Dialog 11 - Screen graphics, dialog guided input, 3 D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets also with islands, shift and rotation of the coordinate system - Electronic handwheel - Interface RS 232 - Swiveling vertical milling head +/- 90 - Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system - Spindle sleeve adjustment 80 mm - Horizontal milling device - Full protection cabin Lsdpfxehhuf Hs Aqvohg - Ball screw spindles in all 3-axes - Coolant system - Bele

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Lhsdpfx Asxtmqtoqvjg Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,400 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, spindle speed (max.): 2,000 rpm, table length: 4,000 mm, table width: 2,000 mm, CNC Bed-Type Milling Machine SACHMANN RAMBAUDI - MP-212 HS MACH-ID 9328 Make: SACHMANN RAMBAUDI Type: MP-212 HS Control: HeidenHain iTNC530 Year: 2007 KOSMO 3 indexing head Sk-50, 0,02 Degrees, 1195 Nm Spindle extention L = 600 mm with 2000 Rpm 3D Measuring probe MP60 ATC Chain 80 Positions Coolant system 1320 L with 4,8 Bar Rotary indexing table  2000 x 1600 x 15 ton V-Axis (in feed) 1500 mm Rotation 3 U/Min HeidenHein RON 700 encoder for Table rotation Ram size 500 x 500 with 56 kW Lhsdpfx Aqsx Nh H Devjg Chip conveyor  X-Axis: 6000mm Y-Axis: 2000mm Z-Axis: 1400mm Table Length: 4000mm Table Width: 2000mm Table load: 25000 Power on spindle: 37kW Spindle speeds: 2000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 15000mm Width: 8000mm Height: 6000mm Weight: 85000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,220 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, table load: 300 kg, overall weight: 2,200 kg, CNC milling machine EMCO - FB 450 MC MACH-ID 9401 Make: EMCO Type: FB 450 MC Control: Siemens 828D ShopTurn Year: 2019 Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Lhedpfx Ajyub Udsqveg Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,200 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,200 kg, Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Lodpfxeyucc Nj Aqvshg Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Lsdpextbkusfx Aqvohg Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Lhsdpfx Aey N Du Deqveg Weight: approx. 3.2 t Good condition

Condition: excellent (used), Table 1,200 x 450mm, X 560 Y 510 Z 450. ISO 40 4,000Rpm, Heidenhain TNC 410 Lodpfx Aqey S T Tnevehg