Used Combined Planing Machine for sale (66,982)

Condition: ready for operation (used), PANEL SAW Carriage length: 1600 mm Cutting height: 75 mm Scoring unit Tilting saw unit up to 45° Manual raising and lowering of the saw blade SPINDLE MOULDER Spindle diameter: 30 mm Nljdpfsyt E R Hjx Ai Njf Spindle height: 90 mm Manual spindle raise and lower Speeds: 3500/6000/8000 rpm SURFACE & THICKNESS PLANER Working width: 300 mm Maximum thicknesser height: 200 mm 3-knife cutterhead Conventional knives HORIZONTAL DRILLING MACHINE 550 kg 220 V Year: 2016

Condition: new, Year of construction: 2024, functionality: fully functional, PILLAR table length 2600mm undercutter blade angle adjustment up/down blade adjustment maximum blade diameter 300mm MILLER spindle diameter 35mm spindle revolutions 2000/3100/4400/7000 rpm up/down spindle adjustment Nodpfxovitbuj Ai Nelf LEVELLING AND THICKNESSING MACHINE working width 410mm 3-knife shaft length of worktops 1800 rpm maximum height of material 220mm feed 1 gear HORIZONTAL DRILLING MACHINE

Condition: like new (used), spindle diameter 35 mm 5 speeds from 3,000 to 10,000 rpm motor power 5.5 kW Nlodpsyfua Ujfx Ai Nof Maggi 4-roller feed with stepless speed control tenoning carriage with angle setting scale worktable 120x730 cm 760 kg year of manufacture 2001 can be purchased without feed unit

Condition: good (used), I have a complete Corali line for the production of wooden boxes for sale. The line's capacity is about 800-900 pcs/h. The line consists of the following machine - 1 x M125 - 2 x M127 Nljdpfxjvpvyts Ai Nof - 1x M-65 Lots of spare parts. Maszyny sprawne, używane w stanie dobrym. Faktura VAT Zapraszam do kontaktu

Condition: used, No. 04493 Combined machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm LW Lower plate extendable Nlsdpfx Ajxl Ha Ssi Nof Opening width approx. 145 mm Total pressing pressure 40 tons, specific pressing pressure max. 2 kg/cm2 Heating 2x 1,8 kW - Long belt sander 3 kW Table 2600 x 750 mm LW, extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Sliding table saw / veneer saw / edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Extraction for sander and saw 0.55 kW Delivery rate approx. 11 m3/min Push-button control with main and emergency stop switches Machine on trolley Installation footprint according to manufacturer 7.5 m2 Transport dimensions approx. 3900 x 2100 x 1400 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: defective spare-parts repository (used), Surface grinding unit on the left, roller diameter: 100 mm Nodpfowvt I Hox Ai Nslf Grinding belt length: 950 x 100 mm Horizontal/vertical table support: 120 x 180/10 x 250 mm Contact grinding wheel on the right, 200 mm diameter, grinding belt dimensions: 50 x 2000 mm 2 spindle speeds thanks to pole-changing motor: 11450/2900 rpm Drive motor: 380 V, 0.9/1.3 kW Space required: 1000 x 400 x 1800 mm Weight: 140 kg

Condition: used, 5-way combination profile steel shear, PEDDINGHAUS Type 210 AD/13 Machine No. 529A059, Year of manufacture approx. 1970 Punching unit: Punching force 60 tons Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal Overhang 365 mm Round bar shear: Cutting capacity, round 42 mm Square 38 x 38 mm Flat bar shear: Cutting capacity at shear angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shear: Nlodei Duh Ijpfx Ai Nef Shearing capacity, angle iron at 90° 110 x 10 mm Shearing capacity, angle iron at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notching up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz - Center-finding device via hand lever and centering device - Mechanical stroke release via hand lever - Flat bar shear equipped with 2° blade - Mechanical clamp on the profile steel shear, round bar shear and on the flat bar shear Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg Good condition

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, working width: 300 mm, number of spindles: 10, No minimum price – guaranteed sale to the highest bidder! The machine can be used either as a standalone unit or as part of a complete system: - Joulin vacuum lifter + stacking task & feeding (Search ID: 21264612) Nsdpsyk Tvljfx Ai Nelf - Canali ML 1100 TWIN F.L. 30 H.S. band resaw (Search ID: 21264817) TECHNICAL DETAILS Working width: 300 mm Feed rate: 140 m/min to 200 m/min MACHINE DETAILS Spindle configuration: Horizontal spindle Right vertical lift spindle Left vertical lift spindle Horizontal lift spindle Right vertical lift spindle Left vertical lift spindle Top horizontal spindle Bottom horizontal spindle Bottom horizontal spindle Bottom horizontal jointer spindle EQUIPMENT 10 spindles Multiple lift spindle system NC control All spindles with support bearings (hydraulic clamping) Planer table Precision work in terms of dimension and angle

Condition: excellent (used), Multi-function machine, panel saw, thickness planer SCM Casadei Model: C 30 C Thickness planer 3 kW: Width: 30 cm, Max height approx. 200 mm, 3 knives, Njdpfxsy Eyhrj Ai Nolf 1 feed speed, Jointer: Width: 30 cm, Table length: 150 cm, 3 knives, Adjustable angle fence, Spindle moulder 3 kW: Spindle diameter 40 mm, Spindle height adjustment up-down, 4 speeds, Side sliding table, Adjustable fence, Panel saw 3 kW: Scoring unit, Height and 0-45 degree angle adjustment, Sliding table 225 cm, Ruler on side table, Max saw blade 315 mm, Horizontal drilling machine: Table adjustable up-down, front-back, left-right, The machine has 3 motors, Power supply 380V, Used machine in good condition, ready for operation, Robust and multi-functional.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, rotational speed (max.): 8,000 rpm, shaft length: 145 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Router unit Number of motors: 1 Shaft length: 145 mm Motor power: 4 kW Speed: 8,000 rpm MACHINE DETAILS Installed total power: 5 kW Nlsdpfexxar Ujx Ai Nsf Motor power: 3 kW

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6360.16.65, Country of manufacture: Switzerland Voltage: 380/400/50/3 Net weight: 1350 kg Customs tariff number: 8460.1920 Dimensions: 200/120/160 cm TECHNICAL SPECIFICATIONS Maximum saddle travel: 530 x 220 mm Nedpsw Ucxqsfx Ai Nelf Maximum grinding surface: 520 x 230 mm Table clamping surface: 600 x 200 mm Table speeds Longitudinal, standard operation: 0-25 m/min With slow feed: 5/10 mm - 8 m/min Cross feed: 0-6 m/min Vertical travel by hand: 330 mm Rapid travel by motor: 290 mm Rapid feed rate: 460 mm/min Max. distance between table and spindle axis: 412 mm Vertical feed movement Handwheel, 1 division: 0.01 mm Micrometric device, 1 division: 0.001 mm Automatic: 0.001-0.099 mm With pulse button: 0.001 mm Cross feed movement Handwheel, 1 division: 0.01 mm Micrometric device: 0.001 mm Grinding wheel Diameter x width x bore: 225x25x50/51 mm Standard RPM: 2700 rpm With variable speed drive: 3700-1300 rpm All technical data are provided without guarantee and are subject to possible errors or omissions.

Condition: good (used), Year of construction: 1991, Double-sided, fully automatic hydraulic trimming, milling, and drilling machine Nledpfxjdqc T Ej Ai Nof PADE NST Double-sided, fully automatic hydraulic trimming, milling, and drilling machine M2fi2 Production of chairs, tables, frames, and furniture components Max. working length 2100 mm Tilt -10° – +45° Rotation -10° – +50° 2 saw blades, diameter 400 mm 2 drilling heads, rotatable 360° left and right, 8 spindles in a cross-shaped grid 2 additional horizontal drilling heads, rotatable 360° from the rear, 8 spindles in a cross-shaped grid 2 milling spindles, drilling shaft 30 mm 1 motor for longitudinal adjustment, 1.5 kW 2 saw motors, 2.2 kW 4 drilling motors, 2.2 kW

Condition: good (used), Year of construction: 2001, cutting height (max.): 240 mm, cutting width (max.): 410 mm, Surface planer and thicknesser GRIGGIO FS 410 Year of manufacture: 2001 Nljdpfx Aey S E Ukei Njf Planing width: 410 mm Thicknessing height: 9-240 mm Spindle speed: 5000 rpm Footprint: 2100 x 1500 mm Immediately available

Condition: new, Year of construction: 2025, The track chain links for multi-blade saws are cast from high-quality cast iron or steel castings, ensuring the superior quality of the finished tracks. The links can be equipped with additional carrier spikes. The track components—guides, pins, and bushings—are made from high-grade materials and undergo heat treatment and thermo-chemical processing. The feed accuracy of the track is achieved by a special machining method for the holes in the links. Upon request, we manufacture guides, breakers, sprockets, pulleys, and shafts. We design and produce tracks for multi-blade saws from all over the world, for manufacturers such as: A.COSTA, RAIMANN, TOS SVITAVA, REMA RESZEL, GABIANNI, PAUL, OGAM, and all models of Chinese tracks. Nsdpfx Aiowvp Dde Nelf

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: VRBSI, Manual straightening and leveling center for straightening and tensioning of bandsaw blades. Manual roller device. Nsdpsyizflofx Ai Nolf

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Nsdpfoyzdnbex Ai Nolf Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 126375/99-274723, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 31.12.2025! The offer includes: Stahl Zi52/4-Fi52 (year of manufacture: 1999; serial number: 126375/99-274723) Stahl KBK 52 (year of manufacture: 1999, serial number: 121492/99-271702) The folding rollers of the machine have been replaced. The machine is manually adjustable. Nedexyfmajpfx Ai Nolf

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 338002, No minimum price – guaranteed sale to the highest bidder! Nlodpfxsxyf T To Ai Nef Placing a bid obligates timely collection by 31/12/2025! EQUIPMENT 6 folding pockets, electrically adjustable Altar folding pocket

Condition: new, Year of construction: 2025, Our C300 5-job combines feature a sturdy folded and electro-welded steel plate frame. Significantly thick cast iron platens are carefully ground and milled, and all material used is certified to ensure the highest quality. They mount three self-braking motors, each individually protected, with the ability to adjust power from 3 hp to 4 hp according to the required specifications. The carriage, made of milled and anodized aluminum with significant thickness, can vary in length depending on the model or specific requirements. It runs on steel balls on a track also made of steel and is adjustable for optimum smoothness. Standard equipment includes a 1600 mm carriage, while optional 2200 mm carriages are available. The C300 is an ideal choice for the hobbyist and is indispensable for the restorer. Built to above-average standards in its class, it maintains a price-performance ratio that makes it truly competitive in the marketplace. The machine is fully compliant with the latest CE regulations, ensuring high safety standards. TECHNICAL DATA: Work surface mm 300×1500 Knife-holder shaft diameter mm 70 Shaft rotation speed g/m 5700 Number of knives no. 3 Knives dimensions mm 300x25x3 Max platen registration mm 4 THICKNESS PLANER Work surface mm 300×660 Max pass thickness mm 5.5 Feed speed m/min 7 Max wood passage mm 220 Wood passage min mm 4 Shaft rotation rpm 5700 CIRCULAR SAW Worktable mm 220×1000 Rotational speed g/mm 4500 Blade Ǿ 250 Blade hole Ǿ 30 Max cutting height 90° mm 80 Max cutting height 45° mm 50 Tilting blade 0° 45° Max pass between blade and guide mm 560/700 Engraver Ǿ 90 Scoring hole Ǿ 22 Rotational speed rpm 7000 CAVING MACHINE Work table mm 500×250 Longitudinal stroke mm 205 Nljdpouzxh Isfx Ai Nsf Transverse stroke mm 95 Vertical stroke mm 90 Spindle Ǿ 16 Spindle rotation rpm 5700 VERTICAL MILLING MACHINE Worktable mm 220×1000 Rotation speed rpm 2000/3100/4400/ 7000 Standard spindle diameter mm 30/35/50 Shaft length mm 105 Vertical shaft stroke mm 115 Max tool diameter mm 160 Max tenon depth mm 55 STANDARD EQUIPMENT Counter frame, flag support mm 800×600 Three-phase motor power KW/HP 2.2/3.0 Weight kg 560 ACCESSORIES ON REQUEST Single-phase motor KW/HP 4.0/3.0 Sliding carriage mm 2200×315 LIST PRICE EXCLUDING VAT

Condition: new, - New -Description:- For sawing, milling, surface planing, thickness planingand optional slot drilling- The work tables made of heavily ribbed gray cast ironand the underframe made of welded steel guaranteeTorsion resistance and vibration-free work- Unique in this performance class: smootherAluminum format slide, anodized, with ball contact system- Swiveling saw blade from 90 ° - 45 °- Table bracket with graduated scale and aluminum crosscut fencefor angled cuts on plates and large workpieces- Planing unit with TERSA quick change systemwith three planer knives- Helical-toothed steel feed roller for constantWorkpiece infeed when thicknessing- curved milling protection hood for profiling,with fine adjustment as standard- Milling unit with two speeds- The units are driven by three independent motors- Made in Italy qualityTechnical specifications:Dimensions and weightsWeight (net) approx. 245 kgDressingPlaning table width 300 mmPlaning table length 1200 mmAngle of inclination saw / planer fence 90/45 °Chip removal ssing 3 mmConnection suctionExtraction nozzle diameter 4 x 120 mmSuction nozzle diameter of the saw blade guard 60 mmInstallation informationRequired space length 2460 mmSpace requirement width / depth 2155 mmExplanation of space requirements: Take the dimensions into accountmaximum travels or useful cknessThickness table length 450 mmThickness table width 300 mmWorking height thickness min. 3 mmWorking height thickness max. 200 mmChip removal max. Thickness 3 mmElectrical dataConnection voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle of drive motor 40%Drive motor power 3 x 1.8 kWSliding carriage and tableFormat sliding carriage length 1140 mmFormat sliding carriage width 201 mmFormat sliding carriage height 70 mmTable length 1024 mmTable width 224 mmTable height 900 mmMilling spindleSpindle inclination 0 °Spindle mandrel diameter 30 mmUsable length of the spindle 75 mmSpindle speed (s) 5000 - 7500 min? ¹Milling tool diameter l diameter max. 160 mmTool diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmPlaner knife shaftPlaner shaft type TERSAPlane shaft diameter 62 mmNumber of planing knives 3 pcsCircular saw unitTrimming length 1200 mmCutting width with rip fence 540 mmMax. Cutting width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45 °Max. Cutting height at 90 ° 67 mmMax. Cutting height at 45 ° 40 mmMax. Saw blade projection 90 ° 75 mmMax. Saw blade projection 45 ° 60 mmFeedFeed speed 6 m / minScope of delivery:- Tersa quick-change planer knife shaft- anodized aluminum sliding table- Multifunctional stop for parallel cuts and surface planing- Table extension arm with crosscut fence and stop jaw- Eccentric clamping armItem no .: 5500030 Nsdovwf Enjpfx Ai Nolf

Condition: used, Year of construction: 2000, functionality: fully functional, cutting height (max.): 96 mm, saw blade diameter: 300 mm, planing width: 300 mm, input voltage: 400 V, power: 3 kW (4.08 HP), input frequency: 50 Hz, sliding table length: 2,250 mm, The used SAMCO CU 300K is a versatile combination woodworking machine designed for professional applications. It integrates multiple machining functions in a single unit and is ideal for workshops with limited space. Despite its year of manufacture, it offers robust construction and reliable performance for daily operations. Machine equipment Circular saw unit Surface planer Thickness planer Milling unit Further technical data Maximum thickness planing height: 230 mm Nodpfeyyltiex Ai Nolf

Year of construction: 2022, operating hours: 321 h, condition: like new (used), KÄRCHER B300 Ri Diesel Ride-on combination machine: scrubber-dryer and sweeper This B300RiD was manufactured in 2022, has only 321 operating hours, and is in like-new condition. - THE PRICE IS EXCLUDING 19% VAT! - Inspection/test drive is welcome. Nlsdpfxolgv Nvj Ai Nef - Nationwide shipping can be arranged; costs depend on the distance. - We would be happy to have our leasing partner prepare an attractive leasing/financing offer for you!

Condition: good (used), Four-side planer SCM SINTEX – very well-maintained machine from a small joinery Weight: 925 kg Njdpfx Aisyuw Rno Nolf Dimensions (L x W x H): 340 x 100 x 160 cm 380V 4 spindles Bottom/top spindle 7.5 kW Left/right spindle 7.5 kW Max. working height 105 mm Max. working width 180 mm Infeed table 2300 mm Spindle diameter 40 mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 106531, working width: 230 mm, power: 75 kW (101.97 HP), input current: 163 A, table width: 230 mm, Equipment: cabin, Rarity! Four-side planer Weinig Powermat 500 with splitting unit!! (the last two spindles fitted with saw blades, anti-kickback device, splitter wedge) for sale complete with all accessories. The machine has 7 spindles/shafts (bottom / right / left / top / bottom / right / left). We used the line to produce middle layers for three-layer board manufacturing. The machine is in perfect working order. The machine is still in operation and can be demonstrated. Nlsdpfxoyyw Ufo Ai Nsf Further technical details will follow in the next few days...

Condition: ready for operation (used), Year of construction: 1970, operating hours: 1,362 h, functionality: fully functional, machine/vehicle number: 9286, planing width: 600 mm, Planer machine Kupfermühle 5 spindles: bottom / top / right and left / bottom We have produced castle floorboards with this machine, and it was operational until the end. Nljdpfoyyvuwox Ai Njf The machine can be demonstrated. Due to its age, it is sold without warranty or guarantee.