Used Computer To Plate for sale (16,478)

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, Kjdetnlz Hepfx Aabsnc -T-slot plate: clamping plate with T-slots for hydraulic press, eccentric press -Clamping surface: 705 x 484 mm -Inner diameter: 250/220 mm -Plate height: 65 mm -Groove width: 22 mm -Dimensions: see drawing in the photos -Dimensions total: 705/484/H65 mm -Weight: 147 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table Kedpfewypp Isx Aabsnc - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: used, functionality: fully functional, Year of construction: 1985, Hydraulic Guillotine Shear Make: FASTI Model: TCHE 20/10 Year: 1985 Technical Data Brand: Fasti Knjdpfx Asxmguljabsc Model: TCHE 20/10 Year of manufacture: 1985 Sheet capacity: 2000 x 10 mm Dimensions: approx. L 2.60 x W 2.20 (plus support arms) x H 1.60 m Weight: approx. 5 t Equipment • Motorized backgauge 1000 mm with digital readout • Angle gauge • Support arms • Cut length limiter • Manual blade gap adjustment • Pneumatic hold-up device • 1 x spare blade set All information subject to change. A demonstration is possible at any time in our exhibition hall.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, Sahinler round bending machine type IRM 2050x110 working width 2050 mm max sheet thickness 3.0 mm Knsdpfexnc N Uex Aabsc roller diameter 110 mm motor driven

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 332046, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,200 mm, spindle speed (max.): 850 rpm, spindle speed (min.): 6 rpm, feed rate X-axis: 8 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 1 m/min, total width: 10,000 mm, total length: 14,000 mm, total height: 4,500 mm, spindle diameter: 160 mm, table load: 40,000 kg, table length: 3,000 mm, table width: 3,000 mm, workpiece weight (max.): 40,000 kg, overall weight: 71,000 kg, drill spindle length: 1,200 mm, year of last overhaul: 2002, power: 60 kW (81.58 HP), The machine is dismantled on stock, it is fully functionable. Knodpfxeuplptj Aaboc

Condition: good (used), Year of construction: 1969, Hämmerle guillotine shear type AS 10, 4000x10 mm Knodpoxmkf Uofx Aabjc

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Kjdpotq I Rqjfx Aabonc Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Machine dealer with own stock of 1600 m².

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 16 mm, cutting length (max.): 6,000 mm, HYDRAULIC SHEAR LVD MVSB 62/16 Serial number 18478 Yom 06/1991 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 6200mm Distance between uprights 6400mm Gap 60mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.5° Min. number of strokes/min. 6 Max. number of strokes/min 25 Min. blade clearance 0.05 mm Max. blade clearance 1.6mm Motor power 30kW Approx weight 35000 Kg LxWxH 7100x2400x3000mm Kodpfxeumhm Ao Aabenc Accessories included; ELGO P85 “GO-TO” for back gauge Electrical adjustment of back gauge 1000mm 1 x Front support 2mtr, one with 90° square arm front support L2000mm Foot pedal Ball bearings on table Inclinable back gauge with manual hydraulic pump

Condition: good (used), functionality: fully functional, Year of construction: 2011, Motorized Guillotine Shear Make: GEKA Type: ETS 3000x1.5 mm Year: 2011 Technical Data Manufacturer: GEKA Model: 3000 x 1.5 Year of manufacture: 2011 Working length: 3,030 mm Knedpfx Aexl Twdsabjc Sheet thickness: 1.5 mm (St37) Motor power: 3 kW Weight: approx. 4 t Dimensions (L x W x H): 3.90 x 2.50 x 1.70 m Equipment • Angle stop • Motorized backgauge • Elgo P40 control • Electric sheet support device • Extendable table extension • Continuous hold-down bar • Cutting area illumination • Rear safety cage • Front drop sheet chute • Foot switch • Documentation All information subject to change and without guarantee. A demonstration in our showroom is possible at any time.

Year of construction: 2008, condition: excellent (used), Plate heat exchanger APV H17 7.41 4.8nm2 800kw APV H17 MGJ plate heat exchanger /ct2227/ Manufacturer: APV Type: H17 MGJ 10.1 Year of manufacture: 2008 Heat transfer surface: 4.08nm3 Nominal power: 800kw Width: 340mm Height: 1050mm Connection height: 137mm Depth: 60cm Pipe connection DN50,EN 1092 Capacity: Primary: 7.41Liter Secondary: 6.86 Max pressure: 10bar Knedpfxswx Hz So Aaboc Test pressure 15.53 bar Max temperature: 110 °C Stainless steel pipe connections.

Year of construction: 2018, condition: used, Serial number: 1302xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19196 Description: Ammann 538 kg vibrating plate for sale. It has stood for less than a year since it was new and not used at all. Everything must work as it should Knsdjvgzv Ijpfx Aabec Ready for delivery.

Condition: good (used), Year of construction: 2008, Machine no.: B0623A0001, cutting length 6,050 mm, cutting thickness 4 mm, back gauge 1,000 mm, net weight 20,900 kg, 15 kW, control system, manufacturer Elgo Electric, model P8721, 7 supports Knsdjxl Du Topfx Aabsc

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Knsdpfx Aajxp Nvdsboc Total power requirement 83 kW Additional information incl. 15 plates

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Motor power 22 kW Knjdpfx Aouipu Esabsc Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal

Year of construction: 2022, condition: ready for operation (used), General Data Knodpfx Aexd Ib Ieaboc Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Main Drive Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Main Drive Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine. Application Types Rolling

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Knedpfx Aasxmakgjbsc Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20721 Kedpfxswrl T To Aabjnc Specifications: S70 mount, but a little wider For excavator Works as it should Weight: 645 kg 172 Bar Ready for delivery

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: with support ribs, on a solid base frame -Clamping surface: 800 x 800 mm -Table height: 930 mm Knjdpfxowclcis Aaboc -Plate thickness: 25 mm -Transport dimensions: 800/800/H930 mm -Weight: 235 kg

Condition: good (used), Year of construction: 2001, Bending length: 4000 mm Bending strength: 45 mm Anbiegung (kalt) / Pre-bending (cold): 38 mm Antriebsleistung / Drive power: 100 kW Anzahl Walzen / Number of rollers: 4 Adjustable rollers / Adjustable rollers: 3 Verstellungsart der Walzen / Adjustment type of rolls: hydraulisch Oberwalzendurchmesser / Top roll diameter: 710 mm Unterwalzendurchmesser / Bottom roll diameter: 640 mm Seitdwalzendurchmesser / Side roll diameter: 520 mm Arbeitsgeschwindigkeit / Working speed: 2+4 m/min (up to 8m/min) Gewicht Maschine (mit Walze) / Weight of machine (with roller): 78 t Zusatzausrüstung / Additional equipment: Elektronischer Gleichlauf / Electronic synchronization Luftgekühlter Öl-Kühler / Air-cooled oil cooler Obere Stützvorrichtung / Upper support device Seitliche Zylinderabstützvorrichtung (10t) / Lateral cylinder support device (10t) Infeed table (20t) / Infeed table (20t) hydr. Bladder accumulator / hydr. bladder accumulator Konusbiegenvorrichtung / Cone bending device Kjdpfx Ajxp Ntpjabjnc

Year of construction: 2000, condition: used, Della Toffola NF5 mobile kieselgur plate filter 5 m², Aisi 304 - condition: used - location: Bremen - total height: 1.890 mm - total length: 1.200 mm - total width: 2.100 mm Knsdet Ebizspfx Aabsc - remarks: - Working pressure: +6 Bar; - material in contact w/ medium: Aisi 304; - filter medium: diatoms; 240 l tank with agitator for preparing the diatoms; - agitator arranged eccentrically in the upper bottom; - Agitator element: anchor agitator; - mobile frame on rollers with brake; - Weight: 510 KG

Condition: new, Year of construction: 2025, Schnittbereich quadratisch (B x H): 2600 x 100 mm Kürzeste Länge des abgeschnittenen Stücks : 1100 x 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 40 mm Electrical connected load: 34 kW Leistung des Sägemotors: 18,5 kW Kedpfx Ajxlcaueabonc Leistung hydraulischer Motor: 7,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20-100 rpm Saw feed speed: 1-700 mm / min Höhe der Materialauflage: 720 mm Sägeblattdurchmesser: 425 mm Sägeblattbohrung: 50 mm Sägeblattdicke: 2,7 mm Length: 12000 mm Breite inkl. Späneförderer : 6300 mm Height: 3000 mm Weight of machine approx.: 28000 kg Standard configuration Variable blade speed controlled by inverterPrecision feed pressure & feed rate dual valve systemServo feeding motor with precision ball screwCombined guides with bearingsOil mist cooling de anti-vibration deviceP.L.C. control for all electric and hydraulic raulic pump with three-phase motorTwo sets of horizontal and vertical clamping devicesAdjustment baseRoller table

Condition: ready for operation (used), Year of construction: 1988, Immediately available ex-location: Hydraulic guillotine shear Fasti, type 509 25/6, year of manufacture 1988. Cutting length 2550 mm, material thickness 6 mm, electric backgauge 750 mm, drive 7.5 kW, weight 4 t. Price: EUR 5,500 plus VAT ex-location. Ksdpfx Aaexqbnnjbjnc

Condition: used, mileage: 4,05,000 km, Year of construction: 2006, Serial number: YS2R6X2000201xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21128 Ksdew Raf Hepfx Aabenc Specifications: 2012 model Km: approx. 405,000 6x2 Euro 3 Axle distance: 350/132 cm Snowplow mount Engine brake Suspension: steel Underslung blade Box (see pictures) Tires (see pictures) New heater radiator New engine hoses VBG tow hitch AC/climate Radio/DAB Ready for delivery Description:2006 Scania R500 6x2 tipper truck with snowplow setup, including mount and underslung blade.The owner has a custom start button installed by Scania; sometimes the key won’t turn.The start button works every time.See video.Ready for delivery. Km: 405000 HK: 500 Technical approved: Yes EU-approved until: 09.06.2026 Own weight: 12810 Total Weight: 29000 Payload: 16115 Width: 255 Length: 740 Euro: 3 Model: R500 6x2 brøyterigget tippbil

Condition: used, Padovan Green Filter 18 m² mobile Kieselgur stainless steel plate filter, Aisi 304 - condition: used - location: Bremen Kodjt Eb Azjpfx Aabsnc - total height: 2.950 mm - total length: 2.250 mm - total width: 1.500 mm remarks: - Filter medium: diatoms; - tank with agitator for the preparation of diatoms; - Underbody opening diameter: approx. 400 mm;

Condition: ready for operation (used), Year of construction: 1978, Available immediately from location: LVD Hydraulic Guillotine Shear Type MVS 62/4 Year of manufacture 1978 Cutting length 6200 mm Material thickness 4.0 mm Digital backgauge 750 mm Drive 12.5 kW Weight 7500 kg Price: €5,500 plus VAT, ex location Knjdpexqbnhofx Aabjc