Used Concentricity Tablet Press for sale (12,857)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers Nsdpsygud Aofx Ahnelf - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: used, Overall dimensions: 2800x2570x2000 mm Nodpfx Ajyibhkohnolf

Condition: good (used), Pressing force: 25 t Cutting capacity: thickness / width: 1.25 / 140 mm Number of strokes per minute: min./max.: 250 strokes/min. Nsdpfxofim Dwe Ahnelf Ram stroke - max.: 20 mm Usable table area: WxL: 440 x 360 mm

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m – Number of loading zones: 3 Nljdpfx Ahsyuylnjnof Dimensions of a single loading zone: – Loading height: 1140 mm – Length of battens in one zone: 1530 mm – Maximum batten width: 150 mm – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm - 3 pcs 80x100 mm – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 364080, color channels: 2, paper width (max.): 1,000 mm, paper height (max.): 700 mm, counter reading (black): 34,50,00,000, counter reading (color): 34,50,00,000, type of input current: three-phase, KBA Rapida 105 offset press, equipped with a perfector and specially configured for printing on thin paper. Nodoznuyxopfx Ahnolf Price: 99.500 EUR FCA Year of manufacture: 2002 Impressions: 345 million Format: 1000 × 700 mm Colours: 2+0 or 1+1 Perfector: Yes Equipment: Suitable for thin paper printing Availability: August 2026

Condition: excellent (used), Year of construction: 1991, Bergmann SB 600-58 Vertical Baler for Sale Manufacturer: Bergmann Model: SB 600-58 Year of manufacture: 1991 Machine weight: 810 kg High-quality, German-made Bergmann vertical baler, designed for compacting cardboard, plastic film (LDPE), PET bottles, paper, and other recyclable materials. The machine comes from a recycling facility and features a robust, industrial-grade construction, making it suitable for waste management companies, recycling plants, warehouses, logistics centers, and industrial operations. Specifications Manufacturer: Bergmann Model: SB 600-58 Year: 1991 Machine weight: 810 kg Heavy-duty steel construction Nlsdpfx Ahjzntxaensf Suitable for cardboard, plastic film, paper, PET, and other recyclable materials Condition Used industrial machine. Sold in the condition shown in the photos. Inspection is welcome by appointment.

Condition: excellent (used), Year of construction: 2006, Manufacturer: LVD Model: PPEBturbo 220 Type: PPEB-EFL 220/30 Year of manufacture: 2006 Serial number: 30494 Technical data: Maximum pressing force: 2,200 kN (220 tons) Working length: 3,050 mm Width between uprights: 2,600 mm Maximum ram stroke: 450 mm Max. table overhang distance: 685 mm Feed (overhang): 450 mm X-axis stroke: 600 mm Table width: 120 mm Speeds: Approach speed: 120 mm/s Working speed: 21 mm/s Return speed: 200 mm/s Drive and hydraulics: Motor power: 37 kW Power supply: 400 V Pump: adjustable Hydraulics: Bosch / Rexroth SYDFE1 Oil tank: 350 l Other specifications: Control: LVD Cadman CNC Noise level: 80 dB(A) Machine weight: approx. 14,500 kg Axes: Y-axis – Upward and downward movement of the beam X-axis – Approach and bending distance adjustment R-axis – Approach and downward movement 2 x Z-axis – Lateral and counter movement stop 2 x Z-axis – Forward and backward movement with slight inclination of the X-axis V-axis – Easy-Form laser Nledpfx Ahsyhdyisnsf crowning – bending distance compensation

Condition: like new (used), Year of construction: 2023, Exhibition press – 159 tons Year of manufacture: 2023 Control system: Delem Da-66T with touchscreen Pressing force: 36 tons Bending length: 1300 mm Stroke: 150 mm Njdpozcldlsfx Ahnjlf Approach speed: 150 mm/s Working speed: 10 mm/s Return speed: 150 mm/s Connected power: 21 kW Power supply: 400 V / 50 Hz / 3~ Tool clamping force: 50 bar Dimensions (L × W × H): 2050 × 2050 × 2310 mm Weight: 4350 kg

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm 2 printing units Weight: 3000kg Power supply: 400V Nledjzph Rgopfx Ahnjf Year of production: 1994 Baldwin alcohol dampening Control panel Documentation and additional elements included.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 3,050 mm, total width: 1,400 mm, Equipment: CE marking, 3050 mm x 1400 mm automatic membrane press with turnover and pin system. Has two tables. 320 Bar Working Pressure 60 N/cm^2 Spec. Press. 3000 kN Max Pressure 400V 50hz Ready to use in Turkey; can ship abroad. Nljdpfezp H Ikjx Ahnof

Condition: used, Hydraulic workshop press, keyway milling press, groove milling press Hydraulic workshop press, custom-built, MaVo type 5t-20 Used for milling keyway grooves in through-holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Stand width: 770 mm Cylinder stroke: 220 mm Distance from threaded piston rod to table traverse: max. 900 mm Pressing speed, ram downwards: approx. 11.5 mm/sec. = 220 mm in 19 sec. Pressing speed, ram upwards: approx. 24.5 mm/sec. = 220 mm in 9 sec. Motor power: 5.5 kW Mains connection: 400 volts, 50 Hz - 2-hand control (one button for pump on, 1 button for downwards, 1 button for upwards) - Hydraulic pump HAWE, type K5/3 (can also deliver 400 bar, but the pump is very loud) Nljdpfxswki Aps Ahnof - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length - 2 support plates - Very stable steel construction made of 140 series double T-beams - Estimated load-bearing capacity of the steel construction: 40 tons or more - Can be moved with a pallet truck Space requirement L x W x H: 1200 x 930 x 2280 mm Weight: 485 kg

Condition: excellent (used), Year of construction: 2000, Manufacturer EMANUEL Model DEA 800 Year 2000 Condition Used Warehouse number Cod.0337 Power 800 tons Nlodpfxowiidwj Ahnef Slide stroke 900 mm Approach speed mm/sec 400 mm Working speed at 100% mm/sec 15 mm Working speed at 50% mm/sec 31 Slide return speed mm/sec 400 mm Max. vertical clearance 1,500 mm Mold holder table size 2,500 x 1,500 mm Blankholder table size 2,380 x 970 mm Blankholder cushion - total force (ton) 600 tons Lower blankholder stroke 450 mm.

Year of construction: 2026, condition: used, Machine no.: M0753/300/3/28/07, year of manufacture: 2007, rated force: 3,000 kN, rated power: 43 kW, machine weight: approx. 43,000 kg, strokes: approx. 25-100 mm, return time: approx. 0.209 s, stroke length: approx. 40-315 mm, maximum plunger adjustment: 150 mm, maximum installation space: 650 mm, upstream units: coil unrolling reel SOPREM S2371-EM-91-BP55, serial no.: 221003, year of manufacture: 2003, weight: 3,000 kg, SOPREM 1676-E-VV, year of manufacture: 2003, single-sided alignment unit, serial no.: 231003, power: 5.5 kW, feed unit RAZIOL EBAD 4000KL, oil unit, serial no.: 029, year of manufacture: 2017, control system: BECKHOFF, mounted on chassis, recorded coupling hours (November 2025): 34,303 h, total parts: 41,131,300. Nlodpfszqzd Nex Ahnef

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 09/2027, type of input current: three-phase, Roll divider WP Rotamat EN Dough divider and rounding machine Stationary machine, 30 portions, ideally suited for dividing and rounding dough with plastic knife head, connection 400 V, 16A-CEE plug, dimensions: 650 x 670 x 1610 mm, W x D x H Nedpozq Uw Nefx Ahnslf Used machine

Condition: excellent (used), Year of construction: 2014, Heidelberg XL75-4+LX Anicolor, ref. 3023 Year 2014 Nledpfszrp Thjx Ahnef IR + hot air drying Extended delivery length: 160 cm 185 million impressions Maximum sheet size: 607 x 750 mm Non-Stop feeder Non-Stop delivery In very good condition!!!!

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min Nljdpfxjwx R Rds Ahnjf table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm Nledpeyif Nrofx Ahnof die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1113, total width: 1,170 mm, total height: 1,510 mm, total length: 1,850 mm, briquette diameter: 60 mm, overall weight: 770 kg, Never used = New machine condition Year of manufacture: 2024 Operating hours: 6! - Option for water or oil cooling, suitable for larger or multi-shift operations (price is stated without cooling system) - Sufficiently large hopper ensures long machine runtime without the need for frequent material refilling Technical data: Motor power: 7.5 kW Briquette output: 40–100 kg/h depending on material Briquette diameter: 60 mm Briquette length max 60 mm (so-called endless briquette) Pressing pressure: 900 kg/cm² Hopper diameter: 1000 mm Dimensions: 1850 x 1170 x 1510 mm Weight: 770 kg Features: Hydraulic unit: 7 pressing cycles/min SIEMENS LCD programmable touch control panel Manual or fully automatic operation possible – SIEMENS PLC control Nledpfxsyh Nfhe Ahnef Dual pressure gauge for improved pressure monitoring Briquetted material level probe Oil level probe Preheating unit for operation in low temperature environments Inspection window Can be connected to other machines in a production line Voltage: 400V – 50 Hz Moisture content of processed material must not exceed 18%

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Nodpfx Ahjv Tp D Honslf Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: like new (used), Year of construction: 2026, operating hours: 6 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Nlsdpoxfwdofx Ahnof Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), functionality: fully functional, Shelf length: 3000 mm Shelf width: 1300 mm Number of pistons: 6 Njdpfx Ahoztpwcenelf Water heating Safety switch with shear pin

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, I am selling a tetno machine, connected, can be tested. Nominal force: 4000 kN Ram stroke: 1000 mm Nlsdpfsxwlvpsx Ahnjf Passage between columns: 3100 mm Table clamping area: 3100 x 6000 mm Electric motor power: 15 kW Machine dimensions lxwxh: 6000 x 4150 x 4170 mm Press weight: 43800 kg Can send a video of the machine, via whatsapp application

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Amis ZBP 50 S Duo sawdust briquetting machine Year of production 2019 Load capacity up to 140 kg depending on material 3.800 working hours Briquettes Ø 50 mm Tank with a capacity of 1.2 m³ Roller with feeder Pre-ironing Screw conveyor Hydraulic pump motors, 7.5 kW each Fan cooling Sawdust level sensor in the tank Hydraulic oil tank 100 l SIEMENS control system Dimensions length x width x height 3000 x 2400 x 1700 mm Weight 2000 kg Njdpfeumwm Ssx Ahnjlf The price of the new machine is 39.800 Euro

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 560 t, stroke length: 500 mm, operating speed: 10 mm/s, reverse speed: 30 mm/s, table width: 1,400 mm, clearance between the columns: 1,260 mm, total length: 2,010 mm, total width: 1,600 mm, total height: 2,200 mm, overall weight: 4,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, We are offering this very good Boschert Quick-Bend 56 CNC press brake, manufactured in 2018. Nodpfjy Nbw Aex Ahnjlf Manufacturer: Boschert Model: Quick-Bend 56 CNC Year of manufacture: 2018 Condition: very good Category ID: 1466 Type ID: 1717 Machine type: press brake If you have any further questions or need more information, please send us a message or give us a call.

Condition: used, Year of construction: 1998, machine/vehicle number: 1 / 2000, Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Nlsdpfx Aoyvz U Ijhnof Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Standard configuration Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed The documentation is available.A packing list would be available, as an identical press has already been dismantled.