Used Conical Twin Screw Extruder for sale (10,182)

Condition: good (used), S006901 MANUFACTURER: Kaeser MODEL: DS140 Ksdpfx Aeyaq E Aodwjwt SERIAL NO.: 142860 YEAR: 1996 POWER (kW): 75 CAPACITY (m3/min): PRESSURE (bar): 7.5

Condition: excellent (used), MANUFACTURER: ATLAS COPCO MODEL: GA132VSD FF SERIAL NUMBER: APF136837 YEAR: 2008 POWER (kW): 153 CAPACITY (m3/min): 22.9 m3/min - 381 l/s PRESSURE (bar): 8.5 FREQUENCY INVERTER: yes BUILT-IN DRYER: yes HEAT EXCHANGER: no COOLING (AIR/WATER): air Kodpfx Ajxtblxedwowt ON TANK: no DOCUMENTS: no CONNECTION: 2 NEW/USED: USED

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: API170792, overall weight: 1,670 kg, volume flow: 1,005 m³/h, pressure (max.): 10 bar, Equipment: type plate available, PROD. GRASSAIR TYPE RLR125 V Kwodpfown Dltox Adwst S/N API170792 YEAR 2013 CAPACITY (kW) 90 OUTPUT (m3/min) 16.75 CIS (bar) 10 INVERTER yes BUILT-IN DRYER no EXCHANGER yes ON THE TANK no DOCUMENTS no CONNECTION 2 NEW/USED USED

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Kodpfjx Altfox Adwewt Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar.

Year of construction: 2004, condition: excellent (used), Cylinder 1350 + 55 mm screw Ksdpsr Avfvefx Adwswt Year 2004 LD 24

Year of construction: 2006, condition: excellent (used), 8x pieces of screw intake mills PRM Type:MGK 400/175 Ksdpfx Adehry Tiswjwt Year 1992 ,1994 Available 8x pieces

Condition: excellent (used), Year of construction: 2017, operating hours: 4,322 h, functionality: fully functional, Käser screw compressor BSD83T Kwjdpfx Aoxy Nhnedwst

Condition: good (used), 4150 operating hours Kedpewy Hx Hofx Adwowt

Condition: good (used), different twin press drinker, a good condition, immediately available Kodpji Arz Eofx Adwjwt If you are interested, we will be glad to inform you about other machines in our house. You are welcome to visit the machine in our house by appointment.

Condition: like new (used), Year of construction: 2016, operating hours: 1,596 h, functionality: fully functional, Screw compressor Atlas Copco GA22+. 7.5 bar with 4.09 m³/min. 22 kW Kwodpfx Asx S Etyodwjt

Year of construction: 2015, condition: like new (used), Screw-on jaws Claw jaws Type SZKA 312 Weight 3,2 kg Kwsdjfmdgcspfx Adwjt

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Kodpfx Aoh Uyg Njdwowt

Condition: excellent (used), CATALOG NUMBER: 6911 TECHNICAL DATA - Track width: 350 mm - Shaft width: 370 mm - Max cutting height: 200 mm Maximum saw blade diameter: - Upper shaft: 340 mm - Lower shaft: 300 mm - Blade bore diameter: 80 mm From above: - Kickback guards - 2 pressure slip shafts - Pressure unit - Saw shaft 37 kW - 2 smooth slip shafts From below: - Infeed table + guide rail - Kickback guards - Crawler track - Saw shaft 37 kW - Crawler track Kodpex Rc Tbofx Adwjwt - 1 outfeed shaft, slip, smooth - Pneumatically pressed rollers - Maximum saw blade diameter: 300 mm - Electric lifting of upper body up/down 1.1 kW - Automatic central lubrication - Electrically controlled stepless feed speed adjustment 3 kW - Extraction nozzle diameter: 230 mm, 250 mm - Dimensions (LxWxH): 3000x2300x1900 mm - Weight: approx. 4500 kg ADVANTAGES – Italian production – Twin-shaft – Used multi-blade saw – very good condition Net price: PLN 168,900 Net price: EUR 40,200 Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2010, CATALOGUE NUMBER: 6591 TECHNICAL DATA - Maximum cutting height: 250 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Minimum blade diameter: 300 mm - Maximum blade diameter: 400 mm - Maximum infeed material width: 860 mm - Minimum workpiece length: 1,500 mm * From above: - Kickback devices - 2 pneumatically pressed, metal, toothed feed rollers - Kickback devices - Pneumatically pressed, metal, toothed feed roller - Pressure unit - Saw shaft - Pressure unit - 2 pneumatically pressed, metal, toothed feed rollers * From below: - Metal idler roller - Guide Kodpox Rc Nvefx Adwjwt - Kickback devices - Track - Saw shaft - Track - Stepless feed speed adjustment via inverter: 4–40 m/min - Main motors: 2 × 75 kW - Feed motor: approx. 3 kW - Electric body lift (up/down): 0.55 kW - Electric adjustment of saw shafts: 2 × 0.18 kW - Centralized lubrication - Extraction connector diameter: 2 × 300 mm - Dimensions (L × W × H): 3,400 × 2,650 × 2,200 mm - Weight: approx. 7,500 kg ADVANTAGES – Czech manufacture – Double-shaft – DTR technical documentation – Used multi-blade saw, very good condition Net price: 275,900 PLN Net price: 65,690 EUR Net price based on exchange rate 4.2 PLN/EUR (price subject to change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2007, functionality: fully functional, Enclosing machine KERN 3500 Twin Channel K990 with SICK 1D scanner Year of production: 2007. Kwedpfx Adoxfwfxowst Counter: 145 million Full service contract. I have 2 machines for sale with this same configuration.

Condition: like new (used), For sale is an almost as-new, frequency-controlled screw compressor designed for medium to large compressed air requirements. The unit was only connected and tested, but never used in actual operation. (30 operating hours) Technical Data Machine type: Oil-injected screw compressor, sound-insulated, frequency-controlled Manufacturer: HERTZ Kompressoren Kwedeycdpgopfx Adwst Model: FRECON 22 Compact Year of manufacture: 2023 Operating hours: approx. 30 h Rated power: 22 kW Maximum pressure: 10 bar Effective free air delivery: 1.30 – 3.80 m³/min at 10 bar Voltage: 400 V / three-phase Noise level: 71 dB(A) Dimensions: 1900 × 850 × 1435 mm Features & Technology - Frequency-controlled drive for demand-oriented operation - Direct-driven, air-cooled TEFC IP55 motor - Digital controller Logic 26S – easy to operate and monitor Included: - Refrigerant dryer - 2 × 300 liter compressed air receivers Condition: Like new - Ordered by mistake - Only connected and tested - Technically flawless – ready for immediate use Manufacturer's RRP: €19,900 net plus VAT Now: €8,900 Inspection: possible by appointment Delivery: can be arranged If interested, simply write or call:

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Kwedju Szucspfx Adwet Year of build 1970 Serial number 5282 Electric connection 380V Dimension l 5500mm Dimension w 2200mm Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: used, machine/vehicle number: WSBSTA120KW90xxxx, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 22072 Specifications: Model year: 2019 Tyres (see photos) Twin-axle Kodpfx Adex Nuydewowt Length: 464 cm Width: 248 cm Unladen weight: 760 kg Maximum payload: 2240 kg Interior height: approx. 266 cm Interior length: approx. 302 cm Interior width: approx. 197 cm Delivery by agreement Own weight: 760 Total Weight: 3000 Payload: 2240 Width: 248 Length: 464 Model: 2019 Stedele 2-akslet skaphenger

Condition: excellent (used), Year of construction: 2011, operating hours: 68,433 h, functionality: fully functional, Atlas Copco GA37VSDFF screw compressor. 13 bar, 7.25 m³/min. Integrated dryer and inverter. Motor and compressor element overhauled at approximately 65,000 operating hours. Ksdpfx Aex Sv Smsdwswt

Condition: used, Type ID 900 Especially suitable for pasta twin shaft with paddles all stainless steel 2 motor: 2 x 4kW Kwjdpfsx U A A Rex Adwjt safety lid dimensions (l x w x h) : ± 2.550 x 1.000 x 1.300 mm

Year of construction: 1986, condition: used, Serial number: ARP86xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20125 Specifications: Model year: 1986 Type: GA 355 Kwsdowdvbljpfx Adwet Max pressure: 7.5 bar Power: 55 kW Ready for delivery. Own weight: 5750 Kw: 55 Model: GA 355

Condition: excellent (used), functionality: fully functional, Alco Equal Mix Double Shaft Paddle Mixer Manufacturer: Alco Model: Equal Mix Power supply: 400 V Overall dimensions: 3500 × 1550 × 3000 mm Mixing chamber capacity: 1700 × 1050 × 900 mm Top inlet with pneumatically actuated valve Bottom outlet with pneumatically operated discharge valves Digital display of operating parameters Standard bin lifting system with integrated weighing unit Kwjdpfxeyahwcs Adwjt The Alco Equal Mix double shaft mixing machine is designed for intensive and uniform mixing of various food products, especially meat masses. The dual mixing shafts ensure excellent product homogeneity and short cycle times. The machine is equipped with pneumatic systems for easy loading and unloading, as well as an integrated weighing unit for precise process control.

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. Kwsdpfxoyanxgo Adwet This unit is ready to run. A video of this mixer is available below.

Condition: used, overall weight: 398 kg, total length: 500 mm, total width: 500 mm, total height: 820 mm, Clamping cube with Roemheld hydr. Screw in module Mounting holes 4 Pitch fixing holes 320 mm Pitch Roemheld module 170 mm Top to first module 120 mm Length 500 mm Width 500 mm Height 820 mm Weight 398 kg Kwedpfx Aex Tt A Eodwot If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2006, overall weight: 1,000 kg, volume flow: 425.4 m³/h, pressure (max.): 7.5 bar, Equipment: type plate available, PROD - ATLASCOPCO TYPE - GA37 PLUS S/N - API510029 YEAR - 2006 Kedsrz Rtbjpfx Adwewt POWER (kW) - 37 OUTPUT. (m3/min) - 7.09 CIS (bar) - 7.5 HRS (DOC/GENERAL) - 6043 WAVE - no COND. DRYER - no COOLED (POW/WATER) - air ON TANK - no NEW/USED - USED