Used Construction Fence for sale (21,051)

Year of construction: 2025, condition: used, New: Yes Empty weight: 10.000 kg Serial number: 2411167 Transport dimensions (LxWxH): 4x2,1x2,1 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Kedov Th H Hjpfx Aadsdw

Condition: new, functionality: fully functional, empty load weight: 13,000 kg, axle configuration: 3 axles, suspension: air, tire size: 245/70 R 17,5, Year of construction: 2025, chassis model: Lider Heavy-Duty Chassis, Equipment: ABS, Heavy-Duty Lowbed Semi- Trailer. Air / Mechanical Suspensions. Lider Trailer for Heavy-Duty Trailers High Quality and Durability Manufacturing. EU Standards. Kdodpfxerdd H Te Aadjw EBS or Double Line Brake Systems. One-year Warranty for Manufacturing Defects. Customer Requested Colour.

Condition: excellent (used), functionality: fully functional, fuel tank capacity: 10 l, color: original, overall weight: 570 kg, empty load weight: 570 kg, operation weight: 570 kg, lifting power: 150 kg/m, Year of construction: 2015, operating hours: 1,400 h, Equipment: pallet forks, Probst Jumbo-BV-Vario vacuum kerb lifter. In perfect working order but has some age related marks. Very well maintained and regularly serviced. This machine enables the laying of up to 400m of kerbs to be laid daily with just one operator feeding the kerb layer with no manual handling and just moving levers! Honda GXV390 petrol engine which is bullet proof when filters are cleaned regularly. Also available with the machine are Quick Hitch fork attachments to suit a Manitou telehandler and numerous different lifting plates to suit a variety of kerb shapes and sizes. Videos are available of the machine working. Kdodpfjxvqclox Aadow

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph Double Skinned Insulation • 5mm first skins235jr main tank body • 100 mm stonewool insulation between skins Kdodpfew Hzkwjx Aadow • 3mm top skin s235jr • 500 ton total capacity • Complete electrical heating • DN80 outlet steel pipe and valve • DN80 inlet pipe and valves • Hydrostatic Level Gauges • 3x45kw Heating Coils • 3x45kw Gamak/Yılmaz Gerbox/Motor Stirrer • 110 Tons Weight • 2xPT100 Tempereture sensor • Capacitive Level sensor • Power panel and control panel on chassis • Plug-in Electrical Installation • Turn-key ready to use

Condition: used, 700-1400 creels per line, pneumatic beaks Kodpfxjxcnr Rs Aadodw

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21155 Description: We have an Esab SB53 Generator Rep item for sale. The generator is being sold as a repair item as it is in unknown condition. Errors and omissions occur and some cost must be taken into account. Kjdpsw R Nn Defx Aadjdw Ready for delivery

Year of construction: 2025, condition: used, New: Yes Empty weight: 400 kg CE mark: yes Transport dimensions (LxWxH): 1,5x1,3x1,07 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information AC400V-200kW Automatic Load Bank Rated Voltage: 3P4W AC400V 50/60 Hz Rated Voltage & Frequency: 400VAC; 3 phase 4 wire, 50/60 Hz Power Supply: 3P5W AC400V 50 Hz Rated Power: 200 kW at 400V Duty Cycle: Continuois Cooling Type: Forced Air Cooling (Horizontal air intake and exhaust cooling, there will be louver at air outlet and inlet.) Load Steps: Resistive Load: 9 steps, 1, 2, 2, 5, 10, 10, 20, 50, 100 kW Wire Connection: - Load bank input— busbar (star coupling “Y”) - Control power input—terminal block Ksdpovxdx Aofx Aadodw Communication Interface: RS232/RS485

Condition: new, functionality: fully functional, empty load weight: 12,000 kg, maximum load weight: 80,000 kg, overall weight: 92,000 kg, tire size: 245/70 R 17.5, Year of construction: 2025, chassis model: Lider Heavy-Duty Chassis, Equipment: ABS, Heavy-Duty New Lowbed Semi- Trailer. Lider Trailer for Heavy-Duty Trailers High-Quality and Durability Manufacturing Kdjdpfx Aajrcif Hjdew EU Standards. EBS or Double Line Brake Systems. One-year Warranty for Manufacturing Defects. Customer Requested Colour.

Condition: good (used), functionality: fully functional, Large diameter drilling unit up to 1000 mm, manufacturer Tyrolit BC-2 with reduction boom GR 700 and GR 1000. Hydraulic power unit BB with 30 kW output and feed control. Also included is a core drilling stand Fleika 400 with three-phase motor Weka DK 42, drilling range 80 to 400 mm. Additionally, 3 hydraulic spindles with a drilling range of 12 to 500 mm. Drill bits/crowns are not included. Kedpfx Aoxrz D Ejadjdw

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. Kedew Hzfnopfx Aadsdw • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: excellent (used), Year of construction: 2009, operating hours: 7,421 h, load capacity: 4,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,850 mm, motor manufacturer: Kubota, fork length: 1,150 mm, overall weight: 6,100 kg, empty load weight: 4,000 kg, total height: 2,850 mm, total length: 2,300 mm, total width: 2,200 mm, maximum load weight: 4,000 kg, fuel: diesel, Equipment: CE marking, adjustable boom, cabin, front guard, lighting, Combilift C4000 is in very good technical and visual condition Low mast//Total height 2850 mm Kubota engine Kodoxpn Rmopfx Aadodw We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and around the world.

Year of construction: 1994, condition: used, Serial number: 9xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20864 Specifications: - 1994 model - Rod changer - Hc150 hammer - 2500 kg - Km-mount - Vacum cleaner - Tilt cylinder - Grease nipple - Control panel w/ cable - Magazine - Ready for delivery Description: We have a 1994 model Montabert CPA500 drilling tower with HC 150 hammer for sale. According to the owner, everything works as it should. The tower is controlled via a panel with cable, which is permanently mounted on the machine. The hammer has run approx. 100 hours since the last overhaul. Extra support legs have also been welded on to raise the tower off the ground when using other equipment. Ready for delivery Own weight: 2500 Model: CPA500 boretårn m/ hc 150 hammer Kodpfx Ajwvzirsadedw

Year of construction: 2024, condition: used, New: Yes Kdedpfsxuzupox Aadsw Empty weight: 2.250 kg CE mark: yes Serial number: 2002005 Transport dimensions (LxWxH): 2,45x1,4x2 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: like new (used), functionality: fully functional, color: orange, maximum load weight: 4,000 kg, Year of construction: 2020, machine/vehicle number: 615035, POTAIN self-erecting crane HUP 40 30 Serial no.: 615035 Year of manufacture: 2022 Hook height 25.6 m + 30.0 m 40 m outreach 1,000 kg up to 4,000 kg max. Hoist 18 HPL 10 (High Performance Lifting) Kdedewq In Repfx Aadjw Trolley 3 DVF 5 Slewing unit HPS 142 (High Performance Slewing) All drives frequency-controlled Galvanized solid mast Permanent 4-strand reeving Height-adjustable supports with plates Auxiliary control console Integrated radio control incl. charger and 2 batteries 20m power supply cable 15 x concrete ballast blocks Hup 40 30 each 1,750 kg

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Especially designed for staircase construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drilling are easily achievable thanks to the swivelling drilling unit. - Motor with pole changing, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor start via convenient handle switch - Equipped with Röhm two-jaw chuck 1–20 mm - Linear laser for precise workpiece positioning - Drilling unit can swivel 65° left and right - Pneumatic adjustment of machining height; dowelling possible on two levels without resetting Kdjdpfxjxmatnj Aadew - Desired drilling heights can be set for each level via a digital counter; switching is then pneumatic from the front - Cross movement 340 mm, stepless or in 12 mm increments with indexing rail - Pneumatic clamping possible at any position, controllable from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front - 2 swivelling workpiece supports - Suction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Set of drill bits - Operating manual - CE mark - Machine was partially repainted due to existing paint splashes - Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this provider."

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. Ksdpfx Ajw Hzfzoadjdw - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Year of construction: 2003, operating hours: 3,323 h, condition: used, Serial number: AII66xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20507 Specifications: - 2003 model - 3323 hours - 7.25 bar - 22 kW - 450 kg - Uncertain condition - Ready for delivery Description: We have a 2003 Atlas copco GX22 compressor in uncertain condition for sale. The compressor has not been used for a few years, but worked the last time it was used. Therefore, it is sold as in unknown condition. So some additional costs can be expected. Kjdpfswphrmox Aadodw Ready for delivery Hours: 3323 Kw: 22

Year of construction: 2025, condition: used, New: Yes Empty weight: 690 kg Kedjxuzucjpfx Aadjdw CE mark: yes Transport dimensions (LxWxH): 1,94x1,45x1,44 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. Ksdpfx Aow Hza Seadsdw - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20721 Specifications: S70 mount, but a little wider For excavator Works as it should Kedpfxowrl T Ts Aadodw Weight: 645 kg 172 Bar Ready for delivery

Year of construction: 2017, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21004 Kdjdpfx Aaswzrp Hodew Specifications: Manufactured in 2017 Net weight: 114 kg Max pressure: 9.6 bar Extra hose set and nozzle Feeder replaced Works as it should Ready for delivery Own weight: 114

Year of construction: 2019, condition: used, Serial number: 1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19694 Description: 2019 Vama EHK2200 wheel loader broom for sale. Kedpfjvyfa Dex Aadjdw Everything works as it should, according to the owner. It's also good with brush left on it. There are 2 water tanks with nozzles to reduce dust when sweeping. Ready for delivery

Year of construction: 2014, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19994 Specifications: Kdodpfx Aov U Tmnsadjw - 2014 model - 47m3 - Total weight: 20 T - Container weight: 2272 kg - Ready for delivery Description: Everything works as it should according to the owner. The container has been used for chipping Ready for delivery

Year of construction: 2015, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19995 Specifications: - 2015 model - 47m3 - Total weight: 20 T - Container weight: 2260 kg - Ready for delivery   Description: Everything works as it should according to the owner. The container has been used for chipping Kedpjv U Syaefx Aadjdw Ready for delivery

Year of construction: 2016, condition: used, Serial number: 2xxxx Please contact ATS Norway for more information Kdodpfjvg N Hhox Aadsw Please provide reference number upon request: 13667 Specifications: - Holm's SL-2.5 - 2016 model - Board (see pictures) - Own weight: 375 kg - Ready for delivery